Hi XDA
I'm using a K88H SmartWatch and a LG G3.
So I already installed the Mediatek App for notifications and a app called Sound about.
My problem is the following. Once I connected my phone the wanted behaviour is that when a call is incoming I want to see it on the SmartWatch but and can answer it there but the sound is coming from the phone. This already works so far. But once the call ended due to the second app my Bluetooth watch is disconnected as phone and only works as a media output device. So I have to reconnect the phone mode manually by pressing the phone button on the watch and reconnect it. But I would like to get it done automatically.
I set SoundAbout that for the phone call audio the phone app decides which sound device should be uses. And in the Bluetooth settings I put the phone call behaviour that the Bluetooth mono auto usage is deactivated. So once a call is made the phone switches from Bluetooth to normal phone as sound output.
So my question is how do I get my phone to use the Bluetooth device as phone again once the call has ended.
Or easier that the phone uses the earpiece for sound and doesnt disconnect the Bluetooth device.
Thanks in advance
Edit: I also tried Bluetooth auto connect app. It automatically disables Bluetooth when calling but only turns on Bluetooth automatically again once I open the app again. Maybe there is a setting that I haven't found that switches Bluetooth back on once the call ended.
Related
Hi, all.
Hope someone can assist me. I'm using an XDA II that has been upgraded to 2.06 Windows Mobile 2003 SE.
I have enabled the Bluetooth Headset profile on my Today screen and calls will transfer over to my headset (SonyEricsson HBH-65).
My question is for the following scenarios:
1) The calls transfer over but sometimes the connection becomes lost while I'm still mid-way in the call. How do I instruct the XDA to transfer the call to my Headset again? Tried pressing the button on my HBH-65 but the call doesn't transfer.
2) Sometimes, I put on my headset but forgot to turn it on. When a call comes in, I realise my mistake and answer the call on my phone first but then I ask the other party to wait while I turn on my HBH-65. After turning it on, how do I transfer the existing call to my headset?
Hope someone can help with some advice. Thanks in advance
1) I currently use BlueTrek G2 and so far has got no probs at all.
2) The BT headset has to be running before the phone in call. For the BT signal it has to be sent right b4 the phone in call.
I guess that's how you can get ur headset running.
I've got that to my best. Good luck...
No problem with them...
i am using BHB-65 too, they are great ,man, i have no problem with them from the first time using.
1. When you want to connect to the headset, there's an icon near the phone icon, you touch on that , it will indicate the term to transfer the call back the headset or cut it out.
2. When you forgot turning on the BT headset, just turn it on and press "enabled the headset" (on the desktop, remember to "view the profile" in item "Today"), it will automatically transfer the call to the BT headset.
Wish you could do that.
I use Tomtom frequently and use a bluetooth headset to handle my phonecalls. However when I use Tomtom, I want to hear the navigation instructions from the phone speaker and not from the headset. When I recieve or make a phonecall: vice versa.
I have come up whit a workaround solution. I use BTtoggle to turn bluetooth on while navigating if I receive a phonecall, takes some time and then anwser the phonecall through the bt headset. And then with alttab back to tomtom, so that I can see the route and calling at the same time. It's not perfect, but it does the job.
I want to have this done automatically by the phone. If I am navigating and a phonecall comes in, then the phone automatically turns on the BT, I answer the phone and tomtom remains on the screen. If i am done with the conversation, bluetooth turns off and i hear the voice from tomtom again through the phone speaker....
Does anybody know how this can be done? I have seen a Palm application which could do the trick...(by the way, it has got the same name as the bt toggle app: BTtoggle)...
Should be possible.. The only thing needed is a developer who's willing to put some effort into this.
you can use PocketZenPhone, its a profile switcher which is able to active bluetooth on incoming calls.
I am using it for years now.
I am going to look in to Pocket Zen, however do you have to change the profile manualy on incoming call or automatically?
Depending on your bluetooth headset, you can just turn it on and off. My headset has a switch, so when someone calls, I turn it on while its on my ear.
What about getting a Motorola headset with the boom that turns it on and off?
Hello.
I've a problem with Bluetooth call on my phone (stock rom) . All works great but since a couple of days I can't receive or make some calls with any Bluetooth device ( headset handfree, car audio etc). Media like music or icoyote (set in a2dp notification o media) works great.
I've reset all, car audio, phone. Nothing changed. I've installed spectrum mm rom, I've the same problem.
When I open Bluetooth device properties I can't activate the option for call and notification.
Do you have any idea for solve this problem?
Hello and up! Anyone have an idea to solve my problem? I've reset the phone 2 time and it works great for 2 week and now it don't work. I can't made a call with the Bluetooth
bluetooth doesnt open?can u send-receive files?
Hello. Bluetooth works. I can play audio like mp3 on hands-free and car audio. I can make phone calls on car audio but sounds of call don't go on car audio. On the phone I can't check made call on Bluetooth
I've tested the last spetrum's modem. All works great after each reboot but just one time.
When I enable the bt for the first time after rebooting it connect and call phone option was activated. When I enable it the second time it connect but call phone options was disable and if I tried to check it I can't.
the only issue that I have from the bigining..is that many times although b.t connects,it doesnt transfer sound to my plantronics M55 b.t headset.then I just turn off-on my headset,it reconnects automatically and sound is being transmited normally..
I solved the same problem with this thread
https://forums.lenovo.com/t5/Moto-X...less-bluetooth-headset-for-phone/td-p/3652038
Hi hello guys how are you. So i have th essential phone and the gear s3 frontier. When the watch is paired to the phone whenever i receive or make a phone call even using the phones dialer. I would get no sound at all. The other person cant hear me either. I noticed that even if i pick up a call with the phone it would automatically switch to the watch. I think it might be a glitch thinking is more like a radio Bluetooth. So even if i switch to the phone or speaker. No audio at all. If i turn off the Bluetooth everything is back to normal. Any suggestions. I would like to keep on using my watch. Sometimes im not near my phone and would like to talk through the watch. If i go into the Bluetooth settings i can toggle the option for voice calls. I would get the notification when receiving a call but on the watch i cant only decline now.
You have to go in BT settings and set the watch not to be used for phone audio
no audio when answering an incoming call, while paired with a smartwatch
hi,
I'm experiencing the same thing, but I would use another title for the bug (see above).
The answer in post #2 is helping me to get audio when answering a phone call, BUT I can't use my smartwatch (Gear S3) for making calls or answering calls anymore.
So when I disable the "phone audio" in the smartwatch Bluetooth connection profile, the phone sends the audio to the earpiece, as no audio Bluetooth device is connected --> audio is available when answering the call.
But as I want to use my smartwatch for making and answering calls, I'd like to get a solution for this.
Side note: there is no audio on both ends. I can't hear the other end and the other end can't hear me. And the "no audio" thing is only present for the first 10 seconds of a call. After that the audio starts to work on both ends via phone (when watch is connected as BT audio device).
BR
ice
Hello,
I have a problem with my S10 plus samsung...
when my bluetooth is on and connected to the device, ALL applications alert come through bluetooth and not the phone (except call ring)... I do not usually keep the bluetooth in my ear all the time...
I would like to have my application alerts to come on my device without having to disconnect my bluetooth OR disconnect the "media" option of my bluetooth...
how can I do that? ?
thank you