Related
A Big Thanks to @Synthio for providing me these files.Without his help,this guide wouldn't have been possible at all.
Hi Peeps !!
A hard bricked OPX has nothing but a black screen (nothing ever comes on the screen, not even a boot logo ), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition. The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OPX should be detected as QUALCOMM-HS USB Diagnostics xxxx. You might have a bricked OPX as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition.
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?id=0B3gqVK2lYqBiY1M2NjRjVllvYXM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and while keeping it pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Hi
Great work!
I finally got a mod to close my thread and it has been closed.
I'll wait for the file that does not wipe /data
Thanks a loot. Gonna try it today at the end of the day.
Enviado do meu SM-N9005 através de Tapatalk
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Silverstarjigar said:
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Click to expand...
Click to collapse
No.It will keep the bootloader unlocked if it is unlocked already.
Man you are the real mvp... Thanks a lot some people i know are really screwed up because of thier opx got hard brick and there was no such guide available thanks alot mate really thanks
Will Try
Welp, ordered a new OPX yesterday. Just searched "qualcomm oneplus x driver" right when I woke up before work today and found this thread and felt stupid but saw it was as recent as today so I was pretty pumped. Thanks, will try ASAP and then can sell my other OPX, the new one or refuse delivery tomorrow . They deliver so fast now! 3 days!
thanks master sifoo.. my opx back to alive now ?
Thanks
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
DANETO said:
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
Click to expand...
Click to collapse
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Naman Bhalla said:
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Naman Bhalla said:
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
DANETO said:
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Click to expand...
Click to collapse
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Aphex13 said:
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
Click to expand...
Click to collapse
It will not change system but will restore kernel to stock.
Naman Bhalla said:
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Click to expand...
Click to collapse
I tried to solve it many times but still remains
DANETO said:
I tried to solve it many times but still remains
Click to expand...
Click to collapse
PM me now with Teamviewer ID and pass. I will fix it in any case.
Sent from my ONE A2003 using Tapatalk
Did layers work for anyone??
Sent from my ONE E1003 using Tapatalk
Thanks my phone's alive once again.
Sent from my ONE E1003 using Tapatalk
Sorry for my bad english
Can this tool unbrick any case of hard brick ? For example when I change the fastboot logo ? When I type 'fastboot erase bootloader' ?
Envoyé de mon ONE E1003 en utilisant Tapatalk
I was trying to flash China Developer rom before unlocking bootloader as it is a mandatory requirement.. All the content available for flashing of rom in locked bootloader states that it can not be flashed via fastboot mode. It can only be flashed through download mode in recovery or edl mode. But whenever I try to enter download mode or edl mode, my phone reboots and nothing happens ! Please help me out of this situation if anybody has faced this situation or know s how to resolve that issue kindly come forward and reply ! Thanks in advance
For first you should know that if you write this into the development section nobody will read it. But to answer your question I don't know about this problem from others. You may can try it using miui updater app.
Please, don't spam our development section!
dabi01 said:
For first you should know that if you write this into the development section nobody will read it. But to answer your question I don't know about this problem from others. You may can try it using miui updater app.
Please, don't spam our development section!
Click to expand...
Click to collapse
Thanks for your kind response.. Since you can see I am a junior member therefore i dont know the xda rules and i was not trying to spam your development section..
fix fr ur problem
first download the fast boot mode rom from the official website and the mi flash tool kit
then just extract the file from the fastboot mode zip file..it ll b lik a folder..
now go to mi flash tool kit and select the folder!!!!!
now elnter fastboot mode on ur device>>>volume down+power!!!!!
and hit refresh in ur mi tool kit and press flash!!!!!!
at the boot there will be three options select full data!!!
and ya all your data will go!!!!
and if u are use windows 10/8!!!
you will have to disable the drivers signature enforcement first!!!just search in google or youtube !!!
if any doubt rply i ll help!!:fingers-crossed:
pawanjenu said:
first download the fast boot mode rom from the official website and the mi flash tool kit
then just extract the file from the fastboot mode zip file..it ll b lik a folder..
now go to mi flash tool kit and select the folder!!!!!
now elnter fastboot mode on ur device>>>volume down+power!!!!!
and hit refresh in ur mi tool kit and press flash!!!!!!
at the boot there will be three options select full data!!!
and ya all your data will go!!!!
and if u are use windows 10/8!!!
you will have to disable the drivers signature enforcement first!!!just search in google or youtube !!!
if any doubt rply i ll help!!:fingers-crossed:
Click to expand...
Click to collapse
Thank you for replying..But This method you have suggested is for the unlocked bootloader devices but since the arrival of Redmi note 3, Xiaomi is shipping devices with locked bootloader and can only be flashed in edl mode.. When I try to enter edl mode my device restarts and that problem is persisting with many other users also...
abhi.goel said:
Thank you for replying..But This method you have suggested is for the unlocked bootloader devices but since the arrival of Redmi note 3, Xiaomi is shipping devices with locked bootloader and can only be flashed in edl mode.. When I try to enter edl mode my device restarts and that problem is persisting with many other users also...
Click to expand...
Click to collapse
No bro... its working on locked bootloader.. jst try it..
r_rocky07 said:
No bro... its working on locked bootloader.. jst try it..
Click to expand...
Click to collapse
no bro.. same here also.. tried every method, but still unable to enter EDL mode... seems latest roms don't support EDL mode!!
For entring in EDL mode try to connect your device in switch off mode with pressing of both volume+- together.
winkle_sharma said:
For entring in EDL mode try to connect your device in switch off mode with pressing of both volume+- together.
Click to expand...
Click to collapse
not a single method is working!!
learnerz said:
not a single method is working!!
Click to expand...
Click to collapse
I think devices not able to enter in edl mode is because of Miui 8..
abhi.goel said:
I think devices not able to enter in edl mode is because of Miui 8..
Click to expand...
Click to collapse
yes right bro.. they have blocked it!! EDL mode isn't working in recent versions!
---------- Post added at 07:49 AM ---------- Previous post was at 07:41 AM ----------
wow i have my luck today.. successfully unlocked the bootloader right now!!
learnerz said:
yes right bro.. they have blocked it!! EDL mode isn't working in recent versions!
---------- Post added at 07:49 AM ---------- Previous post was at 07:41 AM ----------
wow i have my luck today.. successfully unlocked the bootloader right now!!
Click to expand...
Click to collapse
Congo bro.. please let us know.. who did you see first when woke up today.. I mean where is the luck is coming from..?
Hello abhi.goel!
I'm here with the same problem.Can't enter download mode.
Did you find any solution?
Download the ROM and copy it in the internal memeory, go to the Updater App and select "Choose update Package" and confirm and wait for 15 odd minutes till it update via recovery.
If you are flashing from stable to Developer ROM than all data will be wiped, so backup the data on external memory before doing this.
see i faced same problem.. i will suggest just flash global developer rom through updater app, register for unlock request, even if you get the approval within 1-2days wait at least 1 week, meanwhile keep trying everyday using miunlocktool.. & keep that in mind, while you are trying to unlock the bootloader your device must be online on i.mi.com, & use your registered phone no to log in in the miunlocktool & your device.. hope it will work for you too!!
razorka1977 said:
Hello abhi.goel!
I'm here with the same problem.Can't enter download mode.
Did you find any solution?
Click to expand...
Click to collapse
Flash developer ROM through updater app then apply for unlocking permission.. once you get permission wait for 7 days then you can unlock BL and install twrp and can do whatever you want to.. good luck
Hey!
Z2 owners that like to mess around with their phones are prone to get f#ked. I was there and I faced the problem some of you probably did - a hard brick. There are a ton of tutorials on how to fix it, but I believe I found a new way that doesn't envolve resetting it. I have only tried with twice on my phone, so I'm really looking forward to know if it's universal!
Scenario - Your phone has a black screen. The notification LED is on. If you hold the power button it flashes the ZUK logo and it vibrates. If you identify with this scenario, go forward!
1 - To turn off your device (if you haven't already), press the power + volume up. The phone will vibrate, flash the ZUK logo, turn off the LED and turn it on again. Continue holding both buttons. When the LED turns off again, REMOVE your fingers from both buttons right away. If done correctly, it won't come back again and the LED will be off
2 - Hold both Volume Up and Volume Down at the same time. Connect to the computer. You should encounter your Fastboot mode (with your baseband and other info blank).
3 - Go to your email and redownload the bootloader unlocker. Yes, remember that file? Use it. You can use one of those unlock bootloader tutorials online, but if you know what you're doing, here's the command:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
4 - Right after that, run this other command
fastboot -i 0x2b4c oem unlock-go
That's it. You should be able to go to the recovery (flash it again just to be sure). Try it out and tell me how it goes.
not working...phone is gettin turned off...but holding up and down..then connecting is doin nothing..it just keeps on going on and off again
This method worked for me,thank a lot of,great trick
Sent from my Redmi Note 3 using Tapatalk
you my friend, are a god among men, i owe you a beer.
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
hey thnks bro...i successfully enabled 9008 port and flashed firmware
thanku so much
Where were you man I have to cut my wire and format my phone for flashing new firmware
My phone don't show the led light
No button combination works
I was restoring twrp backup and the next boot...And i was bricked
It shows diagnostic mode 900E
Please help
Finally done
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Had the same problem and first i went to download mode by following the the below link
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
then i downloaded the stock firmware and followed this guide
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
Both of them helped.:good::fingers-crossed: hope they work for you
Please tell me the process for recover from hard brick, because zukfans.eu is no longer available.
paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
What is the process??? Please tell me here because zukfans.eu is not accessable
Rit2005 said:
What is the process??? Please tell me here because zukfans.eu is not accessable
Click to expand...
Click to collapse
Hi ..very sorry..not using z2 plus for a long time..I forgot the process what I did..I followed the steps mentioned there.
EDL (Emergency Download) Mode has been removed/ disable from MIUI 8.1 onwards and Redmi 4A later Xiaomi devices. So you can flash MIUI Fastboot ROMs on your device by using Fastboot mode only, if your bootloader is unlocked. And, we can't use Qualcomm Jig Cable(s) also now.
So, we have only one way to know Qualcomm HS-USB QDLoader 9008 port from PC. It's Test Point Method. This method will work with every MIUI ROMs (Upgrade/ Downgrade) , Locked Bootloader/ Unlocked Bootloader and also work to recover from a Dead boot device (Bricked).
While touching these two points with a metal tweezers plugin the usb cable to the phone and PC will make the phone enter edl mode. You can then release the tweezers.
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...
TioCareca said:
Thanks for the explanation, in any case tere can be situations that fastboot it's not available, hard but possible, in that case that info is helpful...
Click to expand...
Click to collapse
In any case, the bootloader muz be unlocked to initiate EDL using ADB fastboot..
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command.
Click to expand...
Click to collapse
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed
adrenochrome25 said:
:laugh::laugh::laugh:
what make you think they are so lame ? the result is :
failed ! remote device is locked. eom edl is not allowed
Click to expand...
Click to collapse
What makes you think I'm so lame as well. I have used this command and flashed my mi max 2 with fastboot rom. Tho I don't remember if bootloader was locked or unlocked. Probably it was unlocked. But still no issues as anyone can unlock thier bootloader officially.
i wasnt intended at you. it seems they forgot some ways when they first deployed the edl blocking access but with the most recent "roms" they have blocked every access way to edl when bootloader is locked : adb, fastboot & cable
the only way left is from internal pins, but we can expect they will hide them even better on new phones.
Today it's much worth to wait 72h (+30days if you just already unlocked another one today) than opening the models that have "non removable" batteries and risking to leave traces/damages
it's really a shame that xiaomi lock their phone this way, it's a very bad message at the users (fastboot is so much restricted that you cant even switch between stable&dev anymore with locked bootloader) but we still have the chance that they allow unlocking and that this unlocking is a real one allowing full control
Fastboot rom isn't needed untill we brick our device and we can't brick the device untill we have unlocked bootloader. So basically edl mode will work when it's really needed.
It doesn't work for my MM2. Got it since 4/12/17. Didn't know i need to login to mi acc to register my device, set usb debugging, developer's mode, unlock status...I had the phone for less than 2 hrs after updating to MIUI 9 from ver 8 (using the updater app) before it suddenly froze up, crashed and went into bootloop. I tried contacting xiaomi svc ctr but those clowns refused to help saying my device is china export.
I cldn't even get them to help me register my device on my mi acc using the imei & s/n info. So if anyone could offer some suggestions as to how I could ressurrect my phone, I wld be most grateful. Failing which the only avenue is to bring it to a svc ctr in China to get them fix it.
Rgds
My test points don't seem to work
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?
Nike Lee said:
I opened up my mi max2 and followed the steps to short the testpoints but my pc doesn't seem to pick up the Qualcomm device.
Anyway to trigger the thing so that the Qualcomm device can be detected?
Click to expand...
Click to collapse
I managed to short the test points and got the Qualcomm HSB device on the device mgr, flashed the mi max2 with the latest global stable (V9.2.1) rom. But the phone is still stuck at the Android logo with 3 dots...
I wld have thought EDL flashing wld have wiped out everything on the phone and start afresh?
I am now thinking of formatting the entire phone and reflashing it again. How wld I do that?
Thanks for any inputs.
Hi, Does EDL with test point flashing refresh the boot partitions?
I have shorted the test points and successfully reflash the phone with the latest stable global ROMs (even back to MIUI 8.5.6) but just couldn't get the phone past the MI/Android logo after restarting it
If the boot partition files have been messed up and EDL flashing is not refreshing these files, no matter how many times I try to EDL flash the device, it's not going to help. Pls correct me if I am wrong.
Any other options I can try?
rkmadotra said:
Bro edl mode is not removed. It's just moved to fastboot. You can enter edl easily by "fastboot oem edl" command. Hope this helped :laugh:
Click to expand...
Click to collapse
bro thank u so muchhhhhhhhhhhhhhhhhhhhhhhh. it worked im so happy now...........was trying since hours....but u helped me mannn
Hello I was just playing with roms XD today morning and suddenly when i rebooted my phone to recovery it wont happen. Like when I press the volume up and down and power at the same time it gives that fastboot chinese logo and turns off as I have no rom installed in it at the moment. So please can anyone help me with it as I cant boot in to the fastboot because of that and no os in it please help.
Please note I am using 4gb ram and 64 gb internal variant.
kulkarnichinmay65 said:
Hello I was just playing with roms XD today morning and suddenly when i rebooted my phone to recovery it wont happen. Like when I press the volume up and down and power at the same time it gives that fastboot chinese logo and turns off as I have no rom installed in it at the moment. So please can anyone help me with it as I cant boot in to the fastboot because of that and no os in it please help.
Please note I am using 4gb ram and 64 gb internal variant.
Click to expand...
Click to collapse
Are u sure that ur phone have battery????
Make sure that ur phone has battery more than 60% then try to press volume down and power button...
And btw which rom u are used before this issue???
kumarsujita6 said:
Are u sure that ur phone have battery????
Make sure that ur phone has battery more than 60% then try to press volume down and power button...
And btw which rom u are used before this issue???
Click to expand...
Click to collapse
I was on realme ui beta and then flashed c25 vendor using twrp recovery to flash custom roms as with that new realme ui firmware and vendor the custom roms were not being flashed and yes I will try once again after charging m battery, But that battery indicator is not showing up once plugged in to the charger
kulkarnichinmay65 said:
I was on realme ui beta and then flashed c25 vendor using twrp recovery to flash custom roms as with that new realme ui firmware and vendor the custom roms were not being flashed and yes I will try once again after charging m battery, But that battery indicator is not showing up once plugged in to the charger
Click to expand...
Click to collapse
Can u confirm one thing that either ur bootloader is locked or unlocked????
And u used which version of rui ???
Official or unofficial (decrypted)
kumarsujita6 said:
Can u confirm one thing that either ur bootloader is locked or unlocked????
And u used which version of rui ???
Official or unofficial (decrypted)
Click to expand...
Click to collapse
Right now my bootloader is unlocked and I used official version of rui as that time my bootloader was locked. I unlocked my bootloader when I was on stock rui with bootloader locked and upgraded firmware,,,,, this hints me is it because of I downgraded it ? If yes is there any support u can give to solve this problem as I have this only phone and clearly it looks a software issue.
kulkarnichinmay65 said:
Right now my bootloader is unlocked and I used official version of rui as that time my bootloader was locked. I unlocked my bootloader when I was on stock rui with bootloader locked and upgraded firmware,,,,, this hints me is it because of I downgraded it ? If yes is there any support u can give to solve this problem as I have this only phone and clearly it looks a software issue.
Click to expand...
Click to collapse
Ur 1st mistake is u didn't read the disclaimer of rui beta testing ....
They clearly mentioned there that u can't downgrade ....
And if u unlocked by any means then u hv to face such problem...
I think the only solution is service center to flash the stock firmware....
Or u can search in XDA if someone have the qualcom flash tool and can help u then ur prblm may b solved....
Did u can access fastboot???
kumarsujita6 said:
Ur 1st mistake is u didn't read the disclaimer of rui beta testing ....
They clearly mentioned there that u can't downgrade ....
And if u unlocked by any means then u hv to face such problem...
I think the only solution is service center to flash the stock firmware....
Or u can search in XDA if someone have the qualcom flash tool and can help u then ur prblm may b solved....
Did u can access fastboot???
Click to expand...
Click to collapse
Thats what I cant do I cant access fastboot if I access it i will relock the bootloader and roll back but thats the problem
kulkarnichinmay65 said:
Thats what I cant do I cant access fastboot if I access it i will relock the bootloader and roll back but thats the problem
Click to expand...
Click to collapse
If u by chance access fastboot don't relock bootloader .....
Flashing a custom recovery is more appropriate way then locking bootloader....
Try one thing connect charger and leave it for 1 or 2 hr test what happens....
May b if u r lucky then something happens...
kumarsujita6 said:
If u by chance access fastboot don't relock bootloader .....
Flashing a custom recovery is more appropriate way then locking bootloader....
Try one thing connect charger and leave it for 1 or 2 hr test what happens....
May b if u r lucky then something happens...
Click to expand...
Click to collapse
Ohh okay fine lets see and I will try this out too... Thanks
Press power and volume_up buttons simultaneously for 10 seconds. Release. Now try fastboot(power+vol_down). Does it work?