Related
Having a problem and can't track it down.
Apparently no one else os having this same issue!?
My bluetooth stereo headsets pauses for 1 second every 15 seconds.
I first thought it was only to my Motorola T505 but it now happens on my Motorola HT820s.
It's intermittent, it didn't happen the first few times I used the HT820s. i've gone two days using the T505 without any pauses.
It happens plugged in or on battery power, both headsets are fully charged, I've repaired them both a number of times, I've even reset the phone.
The HT820s are old tech, the T505 has worked pretty much flawless with every other phone I've paired it with.
I'm at a total loss.
Try turning off your wi-fi.
-------------------------------------
Sent via the XDA Tapatalk App
videocam said:
Try turning off your wi-fi.
Click to expand...
Click to collapse
Thanks. I'll try that as soon as I can repeat the problem. As of right now it's NOT pausing again.
I can't remember offhand is I played with any Wi-Fi settings the two days it didn't pause.
Sounds promising.
Need to check some more. Earlier today I fired up Pandora and it was skipping turned off Wi-Fi and it instantly stopped.
At home again it's not pausing with Wi-Fi on, Next time out I'll try to see if turning off the Wi-Fi notifications will stop the pausing.
-edit: This morning I left the house with Wi-Fi on, music did NOT pause, I then turned on notifications and it started skipping, At that point the only "fix" was to turn off Wi-Fi altogether, simply turning notifications back off did nothing.
Hi, from time to time when I unlock my phone all sounds stop working.
However when I plug in the headphones they work fine, then when I unplug them, all the sounds work again as normal. Restarting the phone sometimes sorts the problem too.
This issue happen all the time, and seem to happen completely randomly.
Anyone else come across this glitch?
I had this problem with my G2 as well. Every time I have bluetooth on and then go to turn it off, it causes the phone to reset.
I have tried different combinations of control to try and differentiate what might be the cause. GPS on and off, Wi-Fi on and off etc..None of those seem to matter. Just whenever I turn off bluetooth the device resets.
Any ideas? Maybe something that will be addressed in a future bug fix update.
Nobody having the same issue? No ideas?
CBConsultation said:
Nobody having the same issue? No ideas?
Click to expand...
Click to collapse
Just tried mine - does not reboot (mine is temp rooted - should not make any difference).
UPDATE - i also connected a headset first.
I suppose I should clarify the circumstances so testing might be quicker.
If I simply turn bluetooth on and off there is no issue. But when I connect a headset and use as normal, if I turn bluetooth off it reboots the phone. I had the exact same issue with my G2 as well.
Yup, my MT4G does this as well. It's somewhat random, it only happens when I'm disconnecting the BT in some fashion but not every time.
This past time I still had the BT headset connected, all I did was end a (voip w/ csipsimple) call that was over the BT. Just closing the audio channel was enough to kill it.
I'm using a jawbone icon, are you using an aliph headset as well?
Happened to me on my G2, my MT4G should be here tomorrow. It doesn't happen every time, I'm looking for the cause and take note of what I was doing or what app was open when it happens.
I'm using a Motorola Roadster.
I've been unable to determine the common denominator so far... The only thing that is constant when this happens is I have the Car Home app set to open and activate dock mode whenever my Motorola Roadster Bluetooth Speakerphone connects to my phone.
Anybody else have this setting configured??
Agh, I thought it was only me and only when I was using a SIP soft phone connected to Trixbox... hmmm
hah2110 said:
Agh, I thought it was only me and only when I was using a SIP soft phone connected to Trixbox... hmmm
Click to expand...
Click to collapse
Happened to me once also, but also had two other restarts without the bluetooth being involved. I don't think I like this phone.
I called TMobile about it and they just told me to do a complete reset on the phone. I figure I'd try that in case the 2.2->2.2.1 OTA caused something to be messed up but it didn't make a difference.
I have noticed that when it is going to reboot, the "Bluetooth headset disconnected" message doesn't appear when I turn off the headset. The phone continues to work for a few seconds with the bluetooth connected icon still showing (the dots on the side of the BT icon) then it reboots.
hah2110 mentioning sip got me thinking.
I had sipdroid running in the background... I've disabled it and so far haven't been able to reproduce the reboots. With it on I can cause the reboot after two or three disconnects with both a Jawbone Icon and a Blueant Z9.
To be clear, with sipdroid running I can reproduce the reboots *without* actually placing any calls with sipdroid, but with it completely off the phone has been stable.
Interesting... SipDroid does say BT is experimental. I always figured it was problematic because it is using different protocols. Basically [in my mind at least], you are trying to "pretend" that the phone is on a phone call when it is really just using data and other resources of the phone all combined to seem like a phone call. I've had other issues with volume (ringer vs. in-call) when using SIP clients because of that very reason. 3CX supports bluetooth but doesn't flag it as experimental.
Please post questions in Q&A section.
Whosdaman said:
Please post questions in Q&A section.
Click to expand...
Click to collapse
The OP was posting a problem, not an inquiry.
So, after some hunting and tweaking I seem to have found at the very least an answer (maybe).
After rooting the phone I seem to not be having the issue of bluetooth causing reboots after it is turned off. Not sure what that means but I have tried to replicate the problem and have been unable to so far.
Ok I have been experiencing the same issue.
However this is my situation.
I never experienced this until I installed Bluetooth Audio Widget.
A handy app that routes all audio to the BT headset, so you can listen to music on your mono headset. They do state that in all froyo versions it has a known issue where if you shut the headset off before disabling BT it will cause a reboot.
I have used the app for several months knowing this and not having a problem with that glitch. However after awhile it became an issue where it would reboot regardless of the order that you would shut them off.
And all that took place ONLY after enabling the widget.
In just the past week+ it has now been causing the reboot issue no matter what.
It will now reboot regardless of my enabling the widget or not.
Walk out of range of the phone with the headset enabled and it causes a reboot.
Turn off the headset-reboot
turn off BT-reboot
This used to only take place AFTER I had enabled the Bluetooth Audio Widget.
It was an acceptable glitch when it was just caused by the widget.
Now it's become unacceptable.
This is on a stock MT4g non rooted.
with a Plantronics Explorer 240
Hello,
I have not seen a thread on this nor has Google searches helped but I have an issue I wanted to post to see if anyone else was having the issue.
I use my phone for work and often have it on speaker phone, out of no where the call goes quite and the person on the other end of the call can not hear me anymore. Upon looking at the phone the speaker phone seems to get disabled and the call goes back to the handset. This happens often when using the speakerphone but certain calls are worse then others.
In one call I had the speaker phone get disabled about 10 times which was close to every 30 seconds or so. This is very very annoying, I have also rebooted the phone. At this time I am not modded and have less then ten apps installed and I am pretty sure none of the apps I installed are causing the issue.
I will note that I do have the phone connected to bluetooth a lot and when the issue happened I tried to disable the bluetooth while on the call but the issue persisted.
Is anyone else experiencing this issue?
Speaker phone and Bluetooth turning off at random
I am having the exact same problem. But for me this happens with Bluetooth and speakerphone. This is getting really frustrating for me and potentially dangerous when I try to switch back to Bluetooth while driving.
Have you figured out a solution for this yet ?
Whenever I connect to one of my Bluetooth devices it shows that it's "Connected to xxxxx" in the secondary screen.
However, after I disconnect from the Bluetooth device it still says its connected in the secondary screen and the secondary screen just hangs there frozen saying its connected. I can only get rid of it by restarting the device.
Anyone else having this issue?
I'm experiencing this issue. I think it started happening after applying the latest update.
to fix it w/o restarting the device, you can go to settings - display - second screen and turn off 'show when main screen on' and back on.
I have this and all kinds of BT issues with my car.
Bluetooth has given me a lot of problems. Secondary screen stuck displaying the "connected" message, Bluetooth crashing, and high CPU usage when not connected. I've had better experience by toggling Bluetooth off and on with Tasker after disconnecting from my car. Figure it gives it a kick causing it to play nice.
McNutnut said:
Bluetooth has given me a lot of problems. Secondary screen stuck displaying the "connected" message, Bluetooth crashing, and high CPU usage when not connected. I've had better experience by toggling Bluetooth off and on with Tasker after disconnecting from my car. Figure it gives it a kick causing it to play nice.
Click to expand...
Click to collapse
So it's not just me having bluetooth issues lately. I was getting ready to drop by AT&T because of all the problems it''s been giving me lately connecting to things on bluetooth...
Mine has recently started doing the same thing with second screen stuck on connected to vehicle Bluetooth. I do remember updating recently so I am unsure what cause this issue. I am using stock with ATT
peekeesh said:
to fix it w/o restarting the device, you can go to settings - display - second screen and turn off 'show when main screen on' and back on.
Click to expand...
Click to collapse
I tried this trick and it only works temporarily. After an hour or so the same connection message will appear even though I'm not connected. So annoying. Come on LG! I like their devices but there is always some annoying issues with their phones.
Are you guys also experiencing general notification issues?
Example, I click on a Twitter or Kijiji notification and the app won't open or I can't respond within the notification shade any more.
See https://forum.xda-developers.com/showpost.php?p=72734315&postcount=10
I'm wondering if this is the cause of everyone else's bluetooth/notification issues. Worth a shot.
Ever since I upgraded to 10K from 10J on T-Mobile it has started doing this. Once I am connected I never have a problem with Bluetooth but connecting has been inconsistent ever since upgrading. My car stereo for example used to connect automatically now to get it to reconnect I have to turn off the stereo and the Bluetooth radio on my phone and then both back on @ same time otherwise I have to manually connect through the phone BT menu
Been having issues with bluetooth too. I've gotten into the habit of just turning it off after I get out of the car, then turning it on right before I get back in the car. If I leave it on all the time it fails to connect about half the time I turn on the car, if not more. Strangely I don't have the same issue with my Anker speakers, so I sort of assumed the car was the problem, but it seems not from these comments
McNutnut said:
See https://forum.xda-developers.com/showpost.php?p=72734315&postcount=10
I'm wondering if this is the cause of everyone else's bluetooth/notification issues. Worth a shot.
Click to expand...
Click to collapse
This seems to have fixed it for me! I had the same issue after updating my phone to the latest build.
thisisjason said:
Been having issues with bluetooth too. I've gotten into the habit of just turning it off after I get out of the car, then turning it on right before I get back in the car. If I leave it on all the time it fails to connect about half the time I turn on the car, if not more. Strangely I don't have the same issue with my Anker speakers, so I sort of assumed the car was the problem, but it seems not from these comments
Click to expand...
Click to collapse
Same exact issue. It only seems to happen to my car stereo since I upgraded to 10K. But my other speakers and headsets 99% of the time it will connect by itself.
Same issue here. Super annoying. Appears to have shown up around the same time that all my notifications stopped working.
I've been having the same issue. I use Car Home Ultra, and noticed that it was very delayed starting, and would start randomly even after leaving my car/disconnecting bluetooth. I thought it was a problem with that app, but now it appears it's that the phone is delayed in notifying of bluetooth connect/disconnect.
I constantly have the "connected" notification taking up the second screen until I reboot.
I am experiencing this aswell, and , when connecting to my SYNC 3 in my Ford Focus, it says connected, but it isn't. If someone rings me, the hand set rings.
It seems to be the initial handshake, if the phone's bluetooth is off when i turn car on, then i turn blutooth on and select "sync 3" it's all good, but if bluetooth is already on , and i switch car on , i get the message on the radio it's connected to my phone... but i cant access contacts or messages ( even though they are ticked in bluetooth menu )...
lucky for the 2 year warranty...
Disabling the Google app has fixed this issue and fixed my push notifications. Not ideal but doesn't appear any other answer exists.
Anybody have any updates on this issue? I have been having the connected message showing more frequently to my vehicles. I have been turning off second display and back on to remove. Thanks for the suggestion Adam about disabling Google app but like you said it is not ideal.
So on Verizon they just pushed a system update. Post update, I enabled Google app, and everything appears to be working great thus far.
I don't remember when but the issue just kind of went away without any action on my part. Maybe it was an update?