Related
Do you think that it will still support USB OTG? There is no info anywhere about this. I use it every day on my Note 2 (mouse and flash drivs mostly).
Also, do you think that the smart dock will still be compatible with it?
mdalacu said:
Do you think that it will still support USB OTG? There is no info anywhere about this. I use it every day on my Note 2 (mouse and flash drivs mostly).
Also, do you think that the smart dock will still be compatible with it?
Click to expand...
Click to collapse
I had the Note 3 for half the weekend just gone. USB OTG all go, Smart Dock works fine
OTG does not work
NZtechfreak said:
I had the Note 3 for half the weekend just gone. USB OTG all go, Smart Dock works fine
Click to expand...
Click to collapse
Does not work for me, neither memory stick, nor mouse or kbd
Same here. It says empty disk.
Sent from Note 3 (The beauty & beast)
fredrikwe said:
Does not work for me, neither memory stick, nor mouse or kbd
Click to expand...
Click to collapse
Strange, its definitely all there. Faulty OTG cable, NTFS formatted drives?
Its working for me, plugged in logitech usb mouse and worked fine
Sent from [email protected] Ass Note III SM-N9005
NZtechfreak said:
Strange, its definitely all there. Faulty OTG cable, NTFS formatted drives?
Click to expand...
Click to collapse
No, not FAT drive either. Using COM-FOUR USB3.0 Adapt Bu A -> St microB
Works fine with the supplied USB3 cable for mains & car 12V charging as well as PC x-fer
NZtechfreak said:
I had the Note 3 for half the weekend just gone. USB OTG all go, Smart Dock works fine
Click to expand...
Click to collapse
Are you running a C.Rom? OR Stock ROM?
Did you root?
Works perfectly with a microUSB3 OTG cable.
fredrikwe said:
No, not FAT drive either. Using COM-FOUR USB3.0 Adapt Bu A -> St microB
Works fine with the supplied USB3 cable for mains & car 12V charging as well as PC x-fer
Click to expand...
Click to collapse
That doesn't sound like an OTG cable, HAS to be an OTG cable, which has a different pin arrangement that the phone recognises.
1sagain said:
Are you running a C.Rom? OR Stock ROM?
Did you root?
Click to expand...
Click to collapse
Pure stock, no root.
1sagain said:
Are you running a C.Rom? OR Stock ROM?
Did you root?
Click to expand...
Click to collapse
Non-rooted stock ROM: XXUMBJ3
My problems are with the OTG dongle ref. above, while the straight USB3 that came with the unit works fine on it's own for charging and PC x-fers
otg working but ntfs format not working even with paragon installed with root
The Beast
I was wondering if anyone is having similar issues with aftermarket cables.
I bought 2 cables that work fine in 2.0 for charging/data transfer.
When I put them into a 3.0 ports nothing happens, there is no prompt to access the phone, and the USB options do not appear on the phone.
I have downloaded the Samsung drivers, and tried 2 different PCs.
I have no issues using the provided Samsung cable.
Any ideas?
I haven't experienced this. Actually, I think the Samsung USB 3.0 cable that came with my phone was bad. When I used it, USB 3.0 would stay grayed out. I had another one for a portable hard drive and that one works fine with the phone. Maybe just try a different brand. These cables seem rather fragile.
LocoBaZuka said:
I was wondering if anyone is having similar issues with aftermarket cables.
I bought 2 cables that work fine in 2.0 for charging/data transfer.
When I put them into a 3.0 ports nothing happens, there is no prompt to access the phone, and the USB options do not appear on the phone.
I have downloaded the Samsung drivers, and tried 2 different PCs.
I have no issues using the provided Samsung cable.
Any ideas?
Click to expand...
Click to collapse
I purchased a 9ft Amazon Basics USB 3.0 cable and all is well. Connecting through a USB 3.0 port, my device was immediately recognized, and I had no problem transferring data files to and from the device.
My only guess would have been to ensure that your PC's USB 3.0 drivers are installed in order for the ports to work properly. Since you're not having any issues with the stock cable, I'm not really sure.
I don't know if it'll make a difference in this case, but I have USB Debugging enabled.
I have all of the drivers update and USB debugging. Think I just got some shoddy cables.
Sent from my SM-N900V using xda app-developers app
I have the same issue. When i use my Samsung cable nothing Happens, But when I use the one from Extenal HD it works Perfect
jncokilla said:
I have the same issue. When i use my Samsung cable nothing Happens, But when I use the one from Extenal HD it works Perfect
Click to expand...
Click to collapse
I called Samsung and eventually after explaining what a micro USB 3.0 cable is and how it is supposed to work, and how it is not working, they finally gave me a place to send the cable and they will supposedly send me a replacement. I'm not holding my breath though. I think I would have had better luck addressing the envelope to "The Twilight Zone."
Sent from my SM-N900V using xda app-developers app
If your 3.0 charger charges fine but is not recognized when plugged into a port I'd check the the port drivers and make sure they are up to date. But first plug into all of your ports. It could be that not all of the ports on your lap/desk top are usb 3.0 friendly. And I've seen instances where if the device has not yet been recognized it will not pick up the device theough a usb 3.0 link. So maybe first get your note recognized by using a 2.0 connector then backdoor with the 3.0 and see what happens.
samsung test all of their cords before they leave manufacturing so getting a dud is very unlikely yet not impossible.
As for the aftermarket cords I normally stick to belkin. Best build quality for a fair price.
ManOfBusiness said:
If your 3.0 charger charges fine but is not recognized when plugged into a port I'd check the the port drivers and make sure they are up to date. But first plug into all of your ports. It could be that not all of the ports on your lap/desk top are usb 3.0 friendly. And I've seen instances where if the device has not yet been recognized it will not pick up the device theough a usb 3.0 link. So maybe first get your note recognized by using a 2.0 connector then backdoor with the 3.0 and see what happens.
samsung test all of their cords before they leave manufacturing so getting a dud is very unlikely yet not impossible.
As for the aftermarket cords I normally stick to belkin. Best build quality for a fair price.
Click to expand...
Click to collapse
I have tried everything.
I plugged into 2.0 and the 3 options pop up to select a mode where 3.0 is grayed out. That menu closes when you unplug.
If you lock your phone while in this menu, you can change the port, unlock the phone and the menu is still there, but it will not allow me to select 3.0.
I have 2 3.0 ports on my laptop, 1 on the docking station, and 1 on my standalone.
None of them work with the aftermarket cable. I will take it as a loss as I really only need them for charging away from home.
LocoBaZuka said:
I have tried everything.
I plugged into 2.0 and the 3 options pop up to select a mode where 3.0 is grayed out. That menu closes when you unplug.
If you lock your phone while in this menu, you can change the port, unlock the phone and the menu is still there, but it will not allow me to select 3.0.
I have 2 3.0 ports on my laptop, 1 on the docking station, and 1 on my standalone.
None of them work with the aftermarket cable. I will take it as a loss as I really only need them for charging away from home.
Click to expand...
Click to collapse
That is indeed odd. Im not sure what to tell you. Hopefully someone will chime in and be of more assistance.
Try changing your network connections. Using usb3.0 puts on airplane mode. If u have wifi on or something it'll show greyed out. It might not be wifi but it's something similar. Saw the greyed out 3.0 the other day and changed a setting on my phone and it came back. Hope it helps.
Sent from my SM-N900V using Tapatalk
I am having the same issue. I have 2 white usb 3.0 cables that I bought online from china via ebay. They were supposed to be USB 3.0 compatible and they look similar to the original stock cable.
When I use the stock cable w/ my usb3.0 port in rear of motherboard, the phone prompts me to enable USB 3.0 mode. When I use either generic cable, it will only function in USB 2.0 mode (I get no prompt for 3.0).
I am running DarthStalker Note 3 Version 6 and 3.4.0_Compulsion Kernel_7.0 on Tmobile version Note 3
I am willing to sacrifice (cut open) one of my generic cables if anyone thinks they can help diagnose the exact cause
I am having issues finding an extra USB 3.0 cable that performs to the level of the one that came with my phone. (My OEM cable works great)
I think the issue is that the 3rd party cables use cheap, thin wire. They can put a micro USB 3.0 tip on it... but the thin wires can't carry the bandwidth.
This is most plainly noticeable by downloading an app that shows the current flow while charging. Try downloading "Galaxy Charging Current *Lite*" and charge your phone through various combinations of
cable (USB2, USB3, OEM, 3rd party)
receptacle (1A, 2A, OEM, 3rd Party),
USB port (USB2, USB3, motherboard, adaptor card)
...etc. Even wireless charging, if you're equipped.
(It should also be noted that the phone will throttle the current flow as it gets closer to full. You'll get higher flow at 30% than 76% or 96%... so keep this in mind as you try different configurations.)
I've found that I got the best current flow (1800mA) using the Samsung USB3 cable, connected to a powered USB3 hub's charging port (no data, just power). This would charge our 3200 mAH battery from 0 - 100% in about 2 hours. When I swapped in a cheap Amazon cable (CableMatters brand)... the current flow dropped to about 800mA... or 4 hours. I emailed CableMatters, and they confirmed that it's a design issue, and that the wires are thin. They were pretty plain about admitting it... and then told me to return the cables to Amazon.
I'm posting all of this useful information not only to be helpful... but also to ask for help. Has anyone found a suitable replacement for the OEM cable? I'm looking for a charging cable... I'm looking for thicker-gauge wires capable of sustaining high current flow.
Any help here? Thanks!
If you are not getting 3.0 speeds then it's not a 3.0 cable. There are many fakes on ebay and amazon.
Only buy Amazon Basics or Samsung branded cables sold by Amazon OR Samsung.
Sent from my SM-N900V using XDA Premium 4 mobile app
So far I had no luck accessing external memory using the cable that came with the Note 3 as well as with USB 2 cable that work on my Note 2. Neither showed up under own files or the ES-Explorer. Is there something I need to activate or overlooked on the Note 3?
snn47 said:
So far I had no luck accessing external memory using the cable that came with the Note 3 as well as with USB 2 cable that work on my Note 2. Neither showed up under own files or the ES-Explorer. Is there something I need to activate or overlooked on the Note 3?
Click to expand...
Click to collapse
I have had strange results using the USB 3 mode not seeing some file but then switching to USB 2 and can see them. All with the USB 3 cable. I think it is PC driver related. Cant nail down anymore yet.
ItsMeOk said:
I have had strange results using the USB 3 mode not seeing some file but then switching to USB 2 and can see them. All with the USB 3 cable. I think it is PC driver related. Cant nail down anymore yet.
Click to expand...
Click to collapse
The NTFS formatted drives wont work with OTG, so u need drives formatted using FAT32 system..
No one uses them nowadays but OTG only seem to work with them
No, the cable that comes with the phone is only for connecting to the phone as a device. I would have expected the OTG cable that worked with your Note 2 to work just fine with the Note 3.
As for buying a USB 3 OTG cable to use with the phone, I wouldn't bother. I've done a lot of testing and haven't been able to get the phone to connect to a device at USB 3.0 speed.
Here is some more info on what I've tried. http://forum.xda-developers.com/showthread.php?t=2599045
I have my NP coming next week! Now I need to know what I should order to go with it. Should I get a USB hub for it? Can I use the Logitech k400 if I wanted? Can I plug a 1TB HDD in somehow to play my movies? My computer recently died so my plex server is down :/
I'd like to change ROMs on the device too.. So please advise. Thank you!
Sent from my Nexus 7 using XDA Free mobile app
Get an adapter cable from micro USB to USB female. Then get a powered USB hub - the passive ones probably won't be able to drive your HDD.
With Kodi, you won't need the PC-based server!
Lots of choices for a Bluetooth keyboard/mouse. I use my Logitech diNovo Mini.
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Thanks for the ideas! I'm really pumped lol.. Kodi sounds like a perfect fit for me. Are there any restrictions on hard drive size that can be connected?
Sent from my SCH-I535 using XDA Free mobile app
xaudiblex said:
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Click to expand...
Click to collapse
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
xaudiblex said:
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
Click to expand...
Click to collapse
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
talk2nate said:
It not being powered isn't going to be an issue you think?
Click to expand...
Click to collapse
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
kenkiller said:
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
Click to expand...
Click to collapse
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
xaudiblex said:
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Click to expand...
Click to collapse
Yeah, but now having a ssd to increase userdata space is a valid method, it changes a limitation of the NP. For me personally I'll just hide away the clutter.
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
talk2nate said:
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sadly, no one can tell you for sure unless they've tried it.
talk2nate said:
Hmm is this a viable option?
Click to expand...
Click to collapse
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
xaudiblex said:
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
Click to expand...
Click to collapse
Hehe...that's your setup? How is that reducing clutter?
If anything, removing the HooToo hub is reducing clutter, unless you need more than the OTG ports on the Inateck hub.
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Most probably not as the 1TB hdd will require a powered usb hub.
Unless it's one of those that has it's own power source.
kenkiller said:
Hehe...that's your setup? How is that reducing clutter?
Click to expand...
Click to collapse
There is a method to my madness! It makes more sense when you see my setup.
My setup:
1x Harmony Smart Hub (USB Powered)
1x Winegard LNA-200 Boost XT Digital HDTV Preamplifier (USB Powered)
2x Micro USB Cables (Charging Tablet & Phone)
The Hootoo hub allows me to charge/power all 4 devices using 1 power brick instead of 4 individual power bricks. Having a functioning OTG was icing on the cake.
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.
Click to expand...
Click to collapse
Yes, that sounds right (make sure it says OTG). Is your 1TB HDD self-powered or is it powered through the USB port? If it is self-powered, it should work. I just plugged up my spare 1TB Fantom Self-Powered (power brick) HDD to see if it works and it seems to be okay. If it is not self-powered, it may be ymmv.
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
talk2nate said:
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Why not plug the hdd into your router? It'll be accessible everywhere, easier to add/delete files on it.
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
talk2nate said:
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
Click to expand...
Click to collapse
Certainly something to consider.
But seriously, if all you're going to put on that hdd is media, plugging it into your PC and sharing it works the same as plugging it into a router (only bad point is that your PC needs to be switched on for the hdd to be accessible). If you're going to be plugging/unplugging your hdd from your Nexus Player just to add files, it gets old pretty fast.
I've no idea if this will be of interest to any of you, especially those people who have yet to buy a 5t and are trying weigh up the pros and cons, but USB OTG is something I use all the time, so o it was one of the first things I tested when I got mine. So far I'm really pleased as everything I wanted to work does so. My last device, a Xiaomi Redmi Note 2, had very poor USB OTG implementation so this is great from my point of view. Maybe I'm behind the times and I had the last phone on the planet with that problem - if so, please delete this mods
First off, before you can use USB OTG, you need to head into settings, then advanced and check the OTG setting. It turns off after ten minutes so I created a link on my homepage using Nova launcher's activity widget menu.
*EDIT* As ny-hardcore has kindly pointed out below, you can also have an OTG quick toggle in notification area. This didn't work for me at first (or I was hitting the wrong thing), but now it does .
Tested and working:
USB card readers of various types, including micro USB readers, with the help of a USB C to Micro USB adapter (5 for £4 on eBay!). The only one that didn't work is a proprietary Samsung multi card reader that also has a full sized USB output and HDMI out too. This isn't very surprising of course, but they're to be avoided if you see one on eBay and assume it's a generic adapter.
80 GB iPod hard drive in a cheap enclosure bought via Amazon.
1 TB 2.5" Western Digital HDD - that's right, no USB hub required, just plug it straight in. The only other portable device I've owned could power it was a Samsung tablet.
2 mega pixel boroscope (using USB Camera app in Play Store) . So useful for finding slow water leaks under the floor or peering down a spark plug hole into a cylinder!!
Micro USB DVB TV dongle, via adapter.
Keyboards and mice via an OTG adapter, including a combination media keyboard with built in trackball mouse (this usually doesn't work on my phones for some reason). The UK keyboard layout is supported via settings so you can have a £ key - woohoo!
Other phones! I plugged my old phone in and discovered I could mount it in MTP mode and then browse its contents from the built in file explorer. For what it's worth, the Oneplus even charges the device that's connected to it.
When you need to eject the device there's a button that appears in the notification area. Sometimes this gets obscured, so swipe down a second time and the 'eject' will appear.
I haven't tried any game controllers yet, but so far the support has been so comprehensive I don't see why there would be a problem.
In the attached photo, the only thing that doesn't work is the black coloured multi purpose card reader on the far right.
In quick toggles you can add an otg switch.
You don't have to go in settings that way to enable otg.
ny-hardcore said:
In quick toggles you can add an otg switch
Click to expand...
Click to collapse
Thanks, for some reason that just didn't work for me unless I went into settings/advanced as well. I can't recall which firmware I was on at the time and I haven't tried since The quick toggles are so far away for my little hands too (please Oneplus add a Xiaomi one handed mode - in fact, make it EXACTLY like Xiaomi devices).
LOL, typical, now it does work for me! I was probably pressing flight mode by mistake or something.
Just FYI, I've tried the following USB DACs with an OTG cable on my 5T and they appear to work:
- Fiio E17
- Meridian Explorer (v1)
- Audioquest Dragonfly (v1)
I just discovered my old Saitek X35/X36 throttle/joystick combo works too! That's a first for one of my Android devices too. Now I need something fun to test it with
I'm using an IrigUA without any problem so far...
eboissier said:
I'm using an IrigUA without any problem so far...
Click to expand...
Click to collapse
Good news for the fret shredders out there
Are those also working well in twrp?
jkyoho said:
Are those also working well in twrp?
Click to expand...
Click to collapse
Sorry, I haven't tried. I'm still fully stock for now, including the recovery.
Has anyone gotten USB sound cards to work *for recording*.
Like I have a Terratec Aureon USB MkII and would like to livestream my DJ sets to Facebook via the FB app, by hooking up the line-out on my decks to the line-in on a soundcard hooked up to my phone and have the streamed video use the soundcard instead of the internal mic which sounds rubbish.
Edit: Tried it, and yes it works, but you have to hook up to the mic port, not the line in, and this doesn't seem like a great idea. Any idea how to change it?
Edit2: Scratch that, phone rebooted itself during a longer test
Lum_UK said:
Has anyone gotten USB sound cards to work *for recording*.
Like I have a Terratec Aureon USB MkII and would like to livestream my DJ sets to Facebook via the FB app, by hooking up the line-out on my decks to the line-in on a soundcard hooked up to my phone and have the streamed video use the soundcard instead of the internal mic which sounds rubbish.
Edit: Tried it, and yes it works, but you have to hook up to the mic port, not the line in, and this doesn't seem like a great idea. Any idea how to change it?
Edit2: Scratch that, phone rebooted itself during a longer test
Click to expand...
Click to collapse
That would be so cool if you can get it working. Wonder if it's the phone or the Terratec? I have NO experience in that area. Good luck! How much power does it draw? Would a powered USB hub in the mix help?
Hadn't thoughtof the power draw issue.
What I really need is a super cheap low power USB line-in of some sort. Though after further testing, FB live streaming is crap, with low quality audio and video in all the configurations I tried (Android app, Win10+Firefox, Win10 app) so I'm probably going to abandon this plan and try a different platform like Youtube or something.
Just cant get otg to work in my device, I am on OOS 4.7.5, rooted with SuperSu, tried a type c to micro USB adapter, also a type c to USB 3.0 adapter, I have enabled the otg option in advanced settings before plugging in the devices, I don't know whether its the phone or the adapter I use, what kind of adapter did you buy, is it a type c 3.1 to micro USB 2.0/ USB 3.0, could you provide me with a name of the adapter.
freegame619 said:
Just cant get otg to work in my device, I am on OOS 4.7.5, rooted with SuperSu, tried a type c to micro USB adapter, also a type c to USB 3.0 adapter, I have enabled the otg option in advanced settings before plugging in the devices, I don't know whether its the phone or the adapter I use, what kind of adapter did you buy, is it a type c 3.1 to micro USB 2.0/ USB 3.0, could you provide me with a name of the adapter.
Click to expand...
Click to collapse
I have the following USB OTG adapters.
2 X micro USB to full sized USB (the long type with a two inch cable).
1 X mini micro USB adapter that is tiny.
1 X micro USB adapter (bigger than above)
1 X USB C OTG adapter with micro SD card reader built in.
All of the above work. In the case of the micro USB OTG adapters, I'm using a USB C to Micro USB adapter (they're tiny, about 2 CM long).
In short, every USB OTG adapter I've put in it works. All are unbranded, generic adapters that I've bought from Amazon or eBay. I've never had to do anything more than enable OTG in settings.
Could it be something to do with the ROM you're using?
In the attached photo, the ones with a yellow Mark are micro USB OTG adapters. The one with a red mark is a USB C multi card reader (built in USB OTG). The one with a blue mark is a USB C to Micro USB adapter.
Lum_UK said:
Hadn't thoughtof the power draw issue.
What I really need is a super cheap low power USB line-in of some sort. Though after further testing, FB live streaming is crap, with low quality audio and video in all the configurations I tried (Android app, Win10+Firefox, Win10 app) so I'm probably going to abandon this plan and try a different platform like Youtube or something.
Click to expand...
Click to collapse
Sadly what you're doing is way beyond anything I've tried. I'm happy when I can get card readers and stuff to work
I vaguely recall reading about specifications for the older micro USB ports on phones and what type of power output they supported - not all were equal. For example, there were a bunch of Samsung phones and tablets that could power hard drives without needing a powered USB hub inline. Similarly, some could power an MHL connection to a TV without the adapter being plugged into a charger like most phones that supported MHL had to. I've forgotten the name for these specs, but presumably USB C is exactly the same and it'll be online somewhere. No idea what your Terratec draws or if that could be the problem - if our phones can spin a 1 TB hard drive then perhaps it's not an issue, I was just clutching at straws.
Good luck!
Ouzo said:
I have the following USB OTG adapters.
2 X micro USB to full sized USB (the long type with a two inch cable).
1 X mini micro USB adapter that is tiny.
1 X micro USB adapter (bigger than above)
1 X USB C OTG adapter with micro SD card reader built in.
All of the above work. In the case of the micro USB OTG adapters, I'm using a USB C to Micro USB adapter (they're tiny, about 2 CM long).
In short, every USB OTG adapter I've put in it works. All are unbranded, generic adapters that I've bought from Amazon or eBay. I've never had to do anything more than enable OTG in settings.
Could it be something to do with the ROM you're using?
In the attached photo, the ones with a yellow Mark are micro USB OTG adapters. The one with a red mark is a USB C multi card reader (built in USB OTG). The one with a blue mark is a USB C to Micro USB adapter.
Click to expand...
Click to collapse
I am on official OOS 4.7.5 rooted with supersu, on which rom are you, is it 4.7.4, are you rooted, are you using any custom kernel.
freegame619 said:
I am on official OOS 4.7.5 rooted with supersu, on which rom are you, is it 4.7.4, are you rooted, are you using any custom kernel.
Click to expand...
Click to collapse
4.7.4 Stock. Stock recovery too (not rooted either).
USB OTG worked on stock 4.7.2 as well.
Working fine for me, stock, custom roms etc. Use a cableconnection usb/otg cable 6" in length. Just enable OTG in the swipe down, plus USB stick in...no problems.
I gave up on using the phone for this because the audio quality via the FB app is terrible anyway, so I nicked my GF's Windows laptop and started using OBS for streaming instead.
Power aside, it's awesome that an external sound card will work (kinda) for recording though!.
techlogik said:
Working fine for me, stock, custom roms etc. Use a cableconnection usb/otg cable 6" in length. Just enable OTG in the swipe down, plus USB stick in...no problems.
Click to expand...
Click to collapse
On which ROM version are you on, is OOS 4.7.5 or another version of OOS or some other ROMs.
---------- Post added at 04:30 AM ---------- Previous post was at 04:28 AM ----------
Ouzo said:
4.7.4 Stock. Stock recovery too (not rooted either).
USB OTG worked on stock 4.7.2 as well.
Click to expand...
Click to collapse
Thanks for the reply, I am beginning to think that it kind of an issue with OOS 4.7.5, I have to flash the old version and try my luck on it.