The home button on my G1 stopped working, so, I unrooted the phone, but now it's stuck on the stock recovery (Triangle/Exclamation point screen). I've been able to do Alt S and alt+L, (Alt+w doesn't work, I think the w is also broken), but I can't reboot because it asks for home and back button to reboot. Any other suggestions on what i can do to fix this?
I have a Nexus S running 2.3.4 and today i reset everything to factory default and now when i press the home button and the search button it just vibrates and nothing happens.
Before it would take me to home or to the search window.
IS there a setting somewhere that I need to chage ?
This happened to me as well today, after unlocking the boot loader and flashing a new (stock) rom. Just restarted the device and everything went back to normal... for now.
Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.
I've flashed the new Vodafone Germany 20B rom, with this rom you can't access recovery/rteset mode. Rom booted but is stuck in a mass of force closes. I can't factory reset as i can't get through the menus. ADB can't find the device... Any ideas at all?
Pretty dsure a factory reset would fix it.
ephumuris said:
I've flashed the new Vodafone Germany 20B rom, with this rom you can't access recovery/rteset mode. Rom booted but is stuck in a mass of force closes. I can't factory reset as i can't get through the menus. ADB can't find the device... Any ideas at all?
Pretty dsure a factory reset would fix it.
Click to expand...
Click to collapse
You should be able to use the stock bootloader Factory reset.
Power off by holding the power button down for about 15 secs. Hold the power button and Vol down until the LG logo appears, then release both briefly and press both again. Follow the on-screen instructions.
LenAsh said:
You should be able to use the stock bootloader Factory reset.
Power off by holding the power button down for about 15 secs. Hold the power button and Vol down until the LG logo appears, then release both briefly and press both again. Follow the on-screen instructions.
Click to expand...
Click to collapse
Read my post again Unfortunately that button combo doesn't work anymore on this update. I tried multiple button combinations with no luck.
In the end i downgraded to a Jellybean KDZ, still got the force closes but this time i could reset using the button combo. Then updated to the German Voda release.
Just a warning for anyone updating to it... Make a full factory reset/data wipe first or you may end up in my situation!
ephumuris said:
Read my post again Unfortunately that button combo doesn't work anymore on this update. I tried multiple button combinations with no luck.
In the end i downgraded to a Jellybean KDZ, still got the force closes but this time i could reset using the button combo. Then updated to the German Voda release.
Just a warning for anyone updating to it... Make a full factory reset/data wipe first or you may end up in my situation!
Click to expand...
Click to collapse
Read your post again - sorry can't see any reference to hardware/physical buttons.
Anyhow - glad you sorted it.
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Dharmost said:
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Click to expand...
Click to collapse
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
D4ND310 said:
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
Click to expand...
Click to collapse
I didn't dip the smartphone into a cup of liquid, i just took a piece of cotton, poured a bit of nail pain remover (don't know the exact name in english, sorry) on it and then scratched the part where the chewing gum was on (on the soft touch back key, which works 100% fine).
I am trying using the method you described, but it seems i can't go into recovery. Maybe i'm not quick enough! will keep trying. If you have any other suggestions i will be glad to hear that!
You could try to make a USB jig, or buy one off of eBay. They're really cheap. Its basicly just a resistens that force the phone to download mode. It have worked fine for all my Sammy's including A310 so it probably works for A (15) series as well.
Just put it in USB connector and press power for a few secs and you should be in download mode.
Just an idea if everything else fails
Sent from my Honor 5X using Tapatalk
go to samsung
A hardware problem could NEVER be fixed by software ways... Unfortunatelly...
It seems that liquid made some changes on your PCB (maybe dissolved some isolators inside??)...
Anyway, go to service or replace it!
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Dharmost said:
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Click to expand...
Click to collapse
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
babyyeobo14 said:
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion, but still couldn't get into recovery. I think the home button is really broken, therefore i need to access recovery in another way.
Cause i flashed the stock samsung firmware twice with odin and i can't still start the phone properly, every guide says that a wipe of cache and dalvik solves the situation. But i need to get into recovery for that.
I can't go into recovery with normal procedure probably because the home button is not working, and all the guides about adb commands say that you need to plug in your phone when it has fully started. So i either need a way to force the device into recovery with my computer, or a firmware that once flashed doesn't give me bootloop