Hi All -
I have a Xiaomi Redmi Pro(mediatek) with unlocked bootloader and running Xiaomi EU Rom (Android 6). I bought the phone in May so it is a relatively new phone.I turned off my phone on a flight and it has never booted back after that. It is stuck in a boot loop. It has some very recent pics and videos of my 8 months old daughter that I desperately want to save. Thre is no SD card in the phone. However, I cannot get the phone to boot in recovery etc. I have tried TWRP. It flashes okay but does not reboot in recovery. Is is either stuck in a bootloop or fastboot screen. Can you lovely people please suggest how to fix this? Can I install china developer rom using mi flash tool and selecting save user data? At this moment, my absolute priority is to save the photographs./videos. Many Thanks.
sid_aj said:
Hi All -
I have a Xiaomi Redmi Pro(mediatek) with unlocked bootloader and running Xiaomi EU Rom (Android 6). I bought the phone in May so it is a relatively new phone.I turned off my phone on a flight and it has never booted back after that. It is stuck in a boot loop. It has some very recent pics and videos of my 8 months old daughter that I desperately want to save. Thre is no SD card in the phone. However, I cannot get the phone to boot in recovery etc. I have tried TWRP. It flashes okay but does not reboot in recovery. Is is either stuck in a bootloop or fastboot screen. Can you lovely people please suggest how to fix this? Can I install china developer rom using mi flash tool and selecting save user data? At this moment, my absolute priority is to save the photographs./videos. Many Thanks.
Click to expand...
Click to collapse
Try to Flash with miflash, using the save user data option
neuck said:
Try to Flash with miflash, using the save user data option
Click to expand...
Click to collapse
Flash successful but the phone still stuck in bootloop. The only change i notice is that the MI logo shows up for a shorter duration and the phone boots again. Is there a way to flash using sp flash tool and save data? I used omega_images_V8.5.4.0.MHQCNED_20170922.0000.00_6.0_cn with MI flash tool and selected "save user data".
sid_aj said:
Flash successful but the phone still stuck in bootloop. The only change i notice is that the MI logo shows up for a shorter duration and the phone boots again. Is there a way to flash using sp flash tool and save data? I used omega_images_V8.5.4.0.MHQCNED_20170922.0000.00_6.0_cn with MI flash tool and selected "save user data".
Click to expand...
Click to collapse
Try to flash TWRP with sp flash tool, and then try to get into recovery and save your info, then flash again with flash all option
neuck said:
Try to flash TWRP with sp flash tool, and then try to get into recovery and save your info, then flash again with flash all option
Click to expand...
Click to collapse
But sometimes twrp requires a wipe before it can read the internal memory, so it's a 50:50 chance with this method
Dont you hve backup on google photos or miui cloud? Try enter from a pc to verify if the photos and videos are backed up
neuck said:
Try to flash TWRP with sp flash tool, and then try to get into recovery and save your info, then flash again with flash all option
Click to expand...
Click to collapse
Thanks. How do I get the scatter file to use with twrp in SP flash tool?
rober788 said:
Dont you hve backup on google photos or miui cloud? Try enter from a pc to verify if the photos and videos are backed up
Click to expand...
Click to collapse
Not the most recent ones which happen to be the most needed(daughter's first flight, festival etc)
sid_aj said:
Thanks. How do I get the scatter file to use with twrp in SP flash tool?
Click to expand...
Click to collapse
Use the same scatter that comes with fastboot rom, the rename TWRP.img to recovery.img and select this file in flashtools, uncheck the others fields
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter (The above command does require your bootloader to be unlocked so kindly keep that in mind before passing the command)
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol ?
Reply if you face any problem
Peace!
addymishra said:
Hello everyone, in today's guide I will tell you all how to fix bootloop problem in Redmi note 4
NOTE: THIS FIX IS FOR THOSE WHOSE PROBLEM DIDN'T GET FIXED EVEN AFTER FLASHING WITH MIFLASH
QFIL is a tool which is used to flash stock firmwares in Qualcomm smartphones.
Prerequisites:
1)Bricked Redmi note 4 (lol I guess you have that already if you are reading this)
2) Working USB cable (You really dont want yourself smashing your head and then finding out faulty cable)
3) QPST Version 2.7.438.3 (Google it)
4) Unlocked bootloader
5) Platform Tools (For passing OEM EDL command)
6) Stock fastboot MIUI ROM (IMPORTANT: Use V8.1.10.0.MCFMIDI from here: http://bigota.d.miui.com/V8.1.10.0....DI_20161228.0000.00_6.0_global_7557bfe334.tgz)
7)QDLoader HS-USB Driver for Redmi Note 4X
Note: I'm not responsible if you mess up your device the mentioned process helped me and others in fixing our devices. You yourself are responsible!
Steps:
1) Open QFIL tool from C:\Program Files\Qualcomm\QPST\bin or wherever you installed it. Run as administrator!
Note: Don't use older version QPST, because you will get an error message when writing userdata section.
2) In QFIL choose Flat Build option.
3) Make sure you you have extracted the above ROM file onto desktop
4) In QFIL tool browse and locate .mbn file
(Named like: prog_emmc_firehose_8953_ddr.mbn)
5) Click on Load XML and select rawprogram0.xml and patch0.xml inside your Fastboot ROM folder.
6) Now turn off your phone and enter Fastboot mode by pressing ans holding power button+vol down button. After that open platform tools folder downloaded above and right click opening cmd in that folder and write following command:
fastboot oem edl
And hit enter
7) Your phone will exit Fastboot mode and red led will start blinking and your phone will be detected as COM port in QFIL tool.
8) At last hit download button, if you did everything right process should begin and end saying download complete.
9) You can now remove your phone and keep holding power button till it boots up. First boot will take some time.
Optional step 10) If you loose your IMEI in flashing process then you can flash your IMEI using Qualcomm IMEI tool (If you face problem in this then comment and i will come up with another guide regarding IMEI flashing)
Hope it helps, if yes be sure you hit that thumbs up button it gives me good feeling lol
Reply if you face any problem
Peace!
Click to expand...
Click to collapse
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
sieg01 said:
Hi,
after your manual, download success, the device restarts, but it then gets stuck with the MI logo?
What can I do?
sieg
Click to expand...
Click to collapse
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
addymishra said:
Hello there,
First of all make sure that you are flashing the fastboot rom which I mentioned in the thread.
Now coming to your problem, open QFIL tool and open configuration panel. You will see many options, check for 'Erase before Download' option and make sure its unchecked then try flashing again. If the problem persist then send me screenshot of QFIL tool along with configuration.
All the best!
Click to expand...
Click to collapse
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
sieg01 said:
Hi again,
I have flashed again and in the " download configuration " I set " Erase before Download", please see the Attachment, unfortunately the same device restarts, but it then gets stuck with the MI logo?
Click to expand...
Click to collapse
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
sieg01 said:
1. My redmi is unlocked ( from Xiaomi )
2. MI flash tool don`t work, because I get error: can not found file flash_all.bat, so I dont`t use this tool
Click to expand...
Click to collapse
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
addymishra said:
Dear, you DON'T NEED TO SELECT "ERASE BEFORE DOWNLOAD" !!! Now listen carefully what to do-:
1) Download mi flash tool and mi unlock tool
2) Your bootloader must be locked now so unlock it with mi unlock (Don't worry just use your mi account it will unlock successfully)
3) Once unlocked flash the fastboot rom in fastboot mode using mi flash tool. IMPORTANT: MAKE SURE YOU SELECT "CLEAN ALL" OPTION
4) Now when flashed your device will restart. Dont let it boot up. Press and hold power+volume down button till you enter into fastboot
5) From fastboot enter EDL mode using "fastboot oem edl" command. Red light will blink
6) Open QFIL and make sure "Erase before download" IS *NOT* SELECTED
7)Click download and you should be good to go
All the best
Click to expand...
Click to collapse
biits1993 said:
Hi I followed your all 9 steps in the first post. However, me too is stuck in 'mi' logo nothing happens waiting after 10 minutes
Then I followed the following steps, flashed by mi tool followed by QFIL. But my QFIL didn't have "ERASE BEFORE DOWNLOAD" option. I downloaded the exact QPST version 2.7.438.3 from gsmhosting forum.
Still the phone boots and stuck with 'mi' logo forever. I have tried flashing other ROMs like RR, lineageOS from TWRP but each of the ROM is stuck while booting . Only miuiPro "miuipro_v7.0_mido_v9.2.1.0_NCFCNEK.zip" manages to boot but keeps rebooting after every 2-3 seconds. My phone has been useless for 3 long days.
Click to expand...
Click to collapse
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
addymishra said:
Try downloading the lastest version from here:
https://androidmtk.com/download-qpst-flash-tool
Erase before download must be unchecked
And remember first boot does take some time so be patient a little. Hope it works!
Click to expand...
Click to collapse
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
addymishra said:
In order to use mi flash correctly kindly place the fastboot rom in C: drive root directory then try flashing, it will work. Its a bug of mi flash
Click to expand...
Click to collapse
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
biits1993 said:
Hi, Thank you very much, I managed to boot the ROM using QFil , however in setup wizard I can't get past the getting device security info in mi account setup. Besides, dialogues for lots "app stopped working" keeps coming. and also there are frequent reboots
Click to expand...
Click to collapse
Strange :/ you can try miflash tool for that case. Download the lastest mi flash tool, enter into EDL mode using "fastboot oem edl" command then in mi flash drop down menu in left corner select "flash_factory.bat" and click flash. It will take around 400 seconds. Make sure you are in edl mode with red blinking light otherwise it will wipe your IMEI. Hope it works!
sieg01 said:
Hi,
II managed to flash successfully with MIflash tool, but after switching it on
do I have permanent boot loop with MI logo? Andere Fastboot ROM`s will MIflash nicht machen. Please look my Screenshot.
Greating
Click to expand...
Click to collapse
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
addymishra said:
Are you able to enter into setup wizard? If not then try the procedure I posted above using factory flash. After flashing with mi flash once again try flashing with QFIL. It's sometimes hit or miss :/
Click to expand...
Click to collapse
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
sieg01 said:
Hi,
I don`t able to enter into setup wizard, because boot-loop, so I done following:
1. mi flash factory flash-successfully
2. mi flash flash once again-successfully
3. flashing with QFIL- successfully
After switch-on again boot loop every 22 seconds with mi-logo
Do you have any more tips for me?
Greating
sieg
Click to expand...
Click to collapse
Man, I think its some sort of hardware issue then. Or maybe your messed up your blobs or your partitions real bad and corrupted them. QFIL helped in my case. Got no more tips, maybe its time to visit service center brother One last shot you can give is to try flashing with QFIL first then with Mi Flash. That's last hope! All the best!
flash failed in QFIL please help
sohanaw said:
flash failed in QFIL please help
Click to expand...
Click to collapse
Which version of QFIL and which ROM are you flashing with? I managed to flash the said version in OP through QFIL without any error. However, other official versions like 9.xx fail to be flashed by QFIL
A solution that worked after all these troubles
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
biits1993 said:
Hi everyone,
This post is for those who are still struggling with 'cool' bootloop in Redmi note 4x irrespective of stock, custom ROMS, you are flashing.
Before all these steps I flashed "mido_global_images_V8.1.10.0.MCFMIDI_20161228.0000.00_6.0_global_7557bfe334.tgz" using QFIL first, then miFlash tool. I was greeted by "can't decrypt phone".
Refer to the OP
Then I flashed lazy_flasher and managed to boot into the stock ROM but couldn't get past the Mi account setup. Even my Keyboard app keeps stopping, so annoying.
The the below Steps I followed redeemed me of this agony powered by xiaomi:
1. Downloaded this firmware==>"global-mido-firmware-7.12.14.zip"
Mokee ROM==>"MK71.2-mido-201803080920-NIGHTLY"
open gapps arm-64, 7.1, pico
open gapps arm-64, 7.1, nano [BOTH] from gapps
2. flashed TWRP=3.1.1-0[official version] from the xda
Code:
fastboot flash recovery [name_of_recovery_image_of_twrp]
3. Entered into Recovery==>WIPE=>Advanced WIPE=> select all partitions==>WIPE[can leave Internal storage unchecked]
4. Then Format Data==>yes
5. Copied firmware, Mokee ROM, pico and nano gapps [4 items] to internal storage
6. Flashed downloaded firmware, then MOKEE ROM, then gapps-nano
7. Reboot to recovery
8. After entering Recovery, Reboot to system
Hopefully we will see mi logo, then Mokee robot animating soon enough. It will take you to setup wizard within 5-10 minutes, If you see any Google apps [Gboard in my case] stopping,
it may mean that google Play services were not installed properly[Don't know why]. In my case I couldn't set up Google account/framework first time. If it happens, go to settings,
enable developer options tapping BUILD version==>then enable USB debugging.
Then reboot to Recovery
Flash gapps-pico.
Do factory reset from Recovery, simple wipe.
Then reboot to System.[DON'T install TWRP as system app etc]
For me, this time I was able to setup google account from the setup wizard. Google service framework has been working without any issues. [ Again Don't know why]
This time I have been able to install my desired apps from playstore
Few more words:
Firstly, I tried flashing only pico, but I couldn't set up the google account, no matter how many times I reboot to recovery, wipe Dalvik-cache etc, then flash pico.
I described exactly what I did that worked out for me. There could be many possible orders, combinations, but I don't have time for that.
I tried to flash Alexy's "RR-N-v5.8.5-20180121mido_alexy.zip" ROM in combination with this firmware but it just will hang TWRP while flashing. only this MOKEE ROM worked with this firmware for me.
I wasted full 3 days for fixing this device. And no intention to tinker with it anymore, my communication has been in a mess!.
While in stock MIUI 'google *apps keeps stopping" just annoyed me as hell, so decided to switch, and after 3 days of disgusting 'Waiting period for bootloader UNLOCK' I couldn't even install a working stock
MIUI ROM now, maybe cheap hardware issue offered by Xiaomi. They have just made everything complex. This is my first and last device from them. My previous Moto G3 was amazing and would be with me had it not been stolen
Will be happy to help regarding this issue, and thank you the OP of this thread, who helped me realize that this device is still able to boot.
Wishing everyone in this note 4x trouble good luck!!
Click to expand...
Click to collapse
will try this tonight, thanks bhai
sohanaw said:
will try this tonight, thanks bhai
Click to expand...
Click to collapse
Let me know bro what happens, hope it works for you
I wanted to use RR rom though, but in the end no ROM worked for me except this one. So I'm just happy with it.
I was trying to flash modified recovery image using magisk after that my phone is dead almost.
My phone don't boot in to android. I can't charge my phone because I get message on the beginning
my system is moddifyed my phone shut down automatically after 5 seconds, also i can't unlock bootloader via fastboot i get information "unlock operation is not allowed" .
I have Leeco 650x with mtk helio x27.
I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Is here any powerful person to solve the problem.
It looks like you flashed firmware for wrong device. Settings say x650 instead of x720 (I am assuming you have x720). I think your best bet is probably the QFIL restore.
https://www.google.com/amp/s/forum....to/guide-unbrick-le-pro3-tested-t3622340/amp/
If you do not have an x720, please disregard this post.
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
LucasNoob said:
I have 650x with mtk processor 100 procent. I only flashed modified recovery in magisk after that I disabled usb debug and oem unclock. after restart my phone I can't unlock my bootloader and I can't continue bootup to android.All I need to do is restore somehow original recovery.
But how to do that without unlocked bootloader in my situation?
I try to flash new Rome using flash tool but I have error 0xC0030003
Click to expand...
Click to collapse
You need to find the LETV X650 Scatter file. I do not know those phones very well. A X600 file may work, you will need to do a lot of research before attempting or you can damage your partitions.
Here is a link for the firmware. https://fapgem.com/video/4tnZoa0H9Q...-firmware-eui-5925s-install-via-fastboot.html
There is a chance that if you can get your PC to see the phone that you may be able to flash the stock firmware. It will not hurt to try it. Again , read extensively before doing anything.
There is a website called Android brick. They have an article on unbricking your phone but I could not access the link. Just Google, or use DuckDuck Go and search Letv X650 Scatter file unbrick.
I just now found this, which may be your solution: https://stephaniefulke.blogspot.com/2015/09/how-to-flash-unbrick-your-mediatek.html
Good luck
Dear all,
I've flashed stock rom for tb-x704v by QFIL.
It has lost baseband firmware. It is unable to recognize sim card, unknown imei, unknown baseband version and no Phone app appear in app drawer.
Any one can help me fix it, please?
If you have tb-x704v please help give your baseband QCN backup.
Many thanks for your support.
QCN Backup, few day ago i to erase persist)))
maximgorbilev said:
QCN Backup, few day ago i to erase persist)))
Click to expand...
Click to collapse
many thanks for your support. Unfortunetly, the SIM card still has not be recognized.
Imei is recovered, but no signal and no service.
Could you please help to backup your efs partition. It think it must sync between efs and imei.
Cao Huỳnh Nhân said:
many thanks for your support. Unfortunetly, the SIM card still has not be recognized.
Imei is recovered, but no signal and no service.
Could you please help to backup your efs partition. It think it must sync between efs and imei.
Click to expand...
Click to collapse
1. i flashed persist.img from firmware folder
2. qfil is not recover my tablet, reset after first screen, i recover tab with mi flash pro, try it, maybe help
maximgorbilev said:
1. i flashed persist.img from firmware folder
2. qfil is not recover my tablet, reset after first screen, i recover tab with mi flash pro, try it, maybe help
Click to expand...
Click to collapse
Do you mean flash persist.img or entire firmware by using Miflash pro?
I've tried to recover my tablet by Rescued and SmartAssistant, SIM card has been recognized but network has not been recognized.
Cao Huỳnh Nhân said:
Do you mean flash persist.img or entire firmware by using Miflash pro?
Click to expand...
Click to collapse
Yes. Qfil and RSA do not recover my tablet, and i flash persist.img from twrp is manual, before reflash firmware.
maximgorbilev said:
Yes. Qfil and RSA do not recover my tablet, and i flash persist.img from twrp is manual, before reflash firmware.
Click to expand...
Click to collapse
I've flash persist.img from twrp and reflash firmware by RSA. But network still not work.
Could you please guide me flash firmware with Miflash pro?
Cao Huỳnh Nhân said:
I've flash persist.img from twrp and reflash firmware by RSA. But network still not work.
Could you please guide me flash firmware with Miflash pro?
Click to expand...
Click to collapse
download the mi flash pro package, launch it, go to the mi flash tab, select the folder with the firmware, give an error that there is no script, score.
In config, manually select raw and patch files from the firmware folder, all other checkboxes are unchecked, the fields are empty.
mi account is not needed, just close this window, the window with downloading drivers too, they look like the instructions for QFIL.
Turn off the tablet, hold down both volume buttons and connect to the PC, press refresh, the port will appear in the list, select clear all at the bottom, and press flash (it does not immediately sew 5 seconds, it thinks like qfil).
After that, the tablet was normally encrypted and wound up.
Sewed 2 times, tk. I didn't hope to help, first I put 55 + clean all and lock started, then 56 + clean all and it also worked.
The bootloader was not blocked, the Jackdaw was standing but in the bootloader oem lock was false.
maximgorbilev said:
download the mi flash pro package, launch it, go to the mi flash tab, select the folder with the firmware, give an error that there is no script, score.
In config, manually select raw and patch files from the firmware folder, all other checkboxes are unchecked, the fields are empty.
mi account is not needed, just close this window, the window with downloading drivers too, they look like the instructions for QFIL.
Turn off the tablet, hold down both volume buttons and connect to the PC, press refresh, the port will appear in the list, select clear all at the bottom, and press flash (it does not immediately sew 5 seconds, it thinks like qfil).
After that, the tablet was normally encrypted and wound up.
Sewed 2 times, tk. I didn't hope to help, first I put 55 + clean all and lock started, then 56 + clean all and it also worked.
The bootloader was not blocked, the Jackdaw was standing but in the bootloader oem lock was false.
Click to expand...
Click to collapse
Thanks for your support. I follow your guide but network never be recognized.
I will use it as wifi version.
Thank you!