Related
Im creating this thread to help people root there HDC Galaxy SIII I9300
and to extend this thread to eventually help people install updated firmware and new roms for their device.
help from everyone will all be taken into count if deemed correct and tested by me
All credit goes to
ColonelZap
Click to expand...
Click to collapse
and his blog for rooting the device in question
this is proven by me to work on
mtk6573
mtk6575
mtk6577
Do not miss any steps follow close and pause video if needed
heres the link
A play store fix is provided which is helpful but installation of it is not properly stated in video and caused me to fail first time
corrections are stated below:
download es file manager, once downloaded remember to mount system as writable at bottom in settings of application
also download s3market files provided, i have never used other file provided for calender etc it has no use in mtk6575 versions of the device
store s3market on root of sdcard
copy files within one by one, not together to system location shown
install the com.android.vending-3.5.16.apk file provided in s3market.
fix permissions in properties of files shown
then reboot device
what i have corrected in the procedure will fix the stopped unexpectedly error 100% if done correctly in mtk6575 phones of this device
I'm curious, how do these phones compare to the real thing? I gave up on clone phones after receiving a very bad quality ciphone 09..
Visually Stunning, Functionally a failure...
Be Warned, the HDC Galaxy S3 especially from fastcardtech are not worth the money and mental anguish to get the thing rooted. They come with Gingerbread, and Locked, and full of Chinese Apps. Once you free of that, the Google Sync is limited, so you cannot get your mail, calender, etc synced. Then there is Colonel Zap which is mysteriously the only person in the world prone to be able to root these devices, but be warned again. Only unless you specifically know your Chipset in your phone, MT6577 or 6575, good luck with that, you should be wary of rooting per Col Zap, as in my case, there process bricked one of my two phones from FastCardTech. And don't get me going on FastCardTech, they are complete B.S., takes over a month to accomplish anything, then they send you the lesser model than you pay for. Doesn't matter all the FREE CRAP you will be offered with this phone, doesn't make up for the fact that is is just a great looking shell with poor electronics inside.
Look these phones are from CHINA, the specs offered online are fiction, and are burnt into the kernel of the phone,so it only appears that you are getting what it states online. you are only getting a phone capable of meager performance, NO 4g, 3g, but at lower speeds if your are lucky enough to fit the Mobile Frequency Spectrum the phone runs in, being their made in China, not a U.S. friendly phone in that aspect. Wi-fi is spotty, and the software is crap, bottom line you get what you pay for, and not many resources to get you through the hard times. Good Luck.....!! At least it looks like the real thing you can show off to your friends while they laugh at you.....
Specs do not match and support is very poor
I bought the "Ultimate pro" version from FastcardTech.com (as a new member i am not allowed to post the link) and it does not meet the specs given by them. The GPS took about 2 hours outside to determine my position. After a factory defaults reset i could not find the strength to do this again
The CPU is not the 6577, but the slower 6575. The camera quality is very poor. The wifi signal is very, very weak. (i have a very good and strong router) The sound quality of a phone call is poor. The 'gsm sound' disturbes the conversation all the time, as if you are to close to a speaker. When you complain to FCT, don't expect any customer support. They give to most strange answers and can give no specific support what so ever. After some time, they say i can return the phone, but it's allmost impossible to meet their requirements, so i am pretty sure that when the have it back, i will never hear from them again. (just read the customer feedback on any honest site)
Including tax, shipping and insurance, i paid about 250 euo's for this phone.
If i had known this all on time, i would not have bought it.
But on the other hand, the responsiveness and quality of the screen is good. Gaming goes smooth and after countless factory defaults, i have managed to turn off most Chinise apps, without losing the nice 'Samsung startscreen'.
All together is not such a bad phone after all, but its not what i counted on in the first place.
Now i am curious about if there will be any tweaks possible. Rooting, custom firmware etc...
I am willing to help if possible.
Kind regards,
Coupedevil
Coupedevil said:
I bought the "Ultimate pro" version from FastcardTech.com ....
Click to expand...
Click to collapse
Was it this one?> http://www.fastcardtech.com/goods-7...droid-404-3G-Dual-sim-47-inch-8MP-Camera.html
Anyway, thanks for sharing your experience. It's disappointing to read how unprofessional some of these shops are It's one thing when they mess up the specs on pre-release products but this shouldn't happen with a phone that has been available for so long. Looks to me like they simply sent the wrong phone to begin with. Their lack of knowledge of even FCE-level English makes it so much worse
I'm looking at chinastore-online to get the Jiayu G2+. The shop at least claims some customer-friendly terms, but so far I've yet to hear from anyone who made a purchase there.
So hang on you've bought an obvious Chinese knock off and your surprised to find its crap? If your interested I can do you a great price on some magic beans (cash or bank transfer only).
Sent from my GT-I9300 using Tapatalk 2
ghostofcain said:
So hang on you've bought an obvious Chinese knock off and your surprised to find its crap? If your interested I can do you a great price on some magic beans (cash or bank transfer only).
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Couldn't have said better myself...
Im not even sure you should be posting this here as this is obviously not a S3...
Sent from my GT-I9300 using xda premium
Teio said:
Couldn't have said better myself...
Im not even sure you should be posting this here as this is obviously not a S3...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
well i thought we was all here to help one and other ??
maybe i am wrong
Galaxy S3 i9300 Plus Ultra-Thin 4.8inch Screen Android 4.0 MTK6575 Single Sim
and thats what i need help i need a rom for the above phone
oh and yes its a clone
many thanks
/off topic
If i were you and i wanted a single core around 200-250 euros i'd get nexus s...
Great hardware,full jellybean support and great dev support here on xda.
What else do you need?
Bang for the buck phone now that it's price has dropped.
/off topic
menthol1960 said:
well i thought we was all here to help one and other ??
maybe i am wrong
Galaxy S3 i9300 Plus Ultra-Thin 4.8inch Screen Android 4.0 MTK6575 Single Sim
and thats what i need help i need a rom for the above phone
oh and yes its a clone
many thanks
Click to expand...
Click to collapse
A clone in looks, but without the Samsung SOC. So chances of getting a ROM off here that'll run are less than zero, sorry.
Sent from my GT-I9300 using Tapatalk 2
menthol1960 said:
well i thought we was all here to help one and other ??
maybe i am wrong
Galaxy S3 i9300 Plus Ultra-Thin 4.8inch Screen Android 4.0 MTK6575 Single Sim
and thats what i need help i need a rom for the above phone
oh and yes its a clone
many thanks
Click to expand...
Click to collapse
It will not be found on this forum this is I9300 SGS3.
Search for a MTK6575 forum .
jje
I really don't think this thread should even be in the Galaxy S III forums
its hard to remove chinese apps
cannot unistall
and hard to upgrade rom @ win 7 -.-
Brand:Samsung
Model:GT-I9300
CPU Hardware : MTK6575
Android Versiyon : 4.0.4
Processor : ARMv7 Processor rev 10 (v7I)
Hardware : SMDK4x12
Kernel : 3.0.13 1211 V18 Wed Sep 5 09:29:18 CST 2012
Ana Bant Sürümü : MAUI.11AMD.W11.50.SP.V20, 2012/08/13 14:56
Üretim Numarası : IMM76D.I9300ZSALE9
Custom Build Version : 1346760007
Ekran: 480x800
can someone tell me if its gps ios workling ?
mine never locks onto sattellites using ulysse or other apps
khankll said:
can someone tell me if its gps ios workling ?
mine never locks onto sattellites using ulysse or other apps
Click to expand...
Click to collapse
I have this galaxy s3 mt6575 clone, same as in the pictures in this thread
http://forum.xda-developers.com/showthread.php?t=1921178
I also had troubles getting the gps to work and started to think it didnt work at all.
But lately I have managed to get some gps signal to work.
I did flash the cwm recovery and have now installed the Lewa rom for it.
google "LeWa For Samsung Galaxy S3 MTK6575" to find the rom if you want to try.
Not sure if it was that rom that made the gps work or not, because I also did install an app named GPS Booster, as well as the u-center gps test app, and the GPS Test app.
Now I get enaugh signal to get my position. But the antenna is weak I think, so I need to be outdoor and have clear weather and clear view to the sky to get it to work. I did not test it in the car yet, but I think it might be to weak to work reliably inside the car.
i just bought the MTK6577 (s3 mimic)
and i want to change his rom (its already rooted)
what rom will work at this device?
Rideran said:
i just bought the MTK6577 (s3 mimic)
and i want to change his rom (its already rooted)
what rom will work at this device?
Click to expand...
Click to collapse
None of these roms will work nor will you find one that will here. XDA doesnt support clone knock off devices.
Rideran said:
i just bought the MTK6577 (s3 mimic)
and i want to change his rom (its already rooted)
what rom will work at this device?
Click to expand...
Click to collapse
use Google search for MTK6577 forum .
Its not a Samsung phone so not a sammmy rom .
jje
Same Products MT6575
I have the software to update another model, which is not mentioned, but with the same processor.
I have also to update the software, it would be possible to modify intalando software programs and extract and place in another of the same model, but modified?
So manufactures improve their imperfections.
Hi,
I've already bought a galaxy Note 3 n9006 from China and a day after it I came back to my country, but unfortunately I found it can not work with any Google applications and it can not add Google account and this is a very big problem for me, also it do not have any languages except English , Korean and Chinese. Can anybody help me? what should I do?
siamaknemati said:
Hi,
I've already bought a galaxy Note 3 n9006 from China and a day after it I came back to my country, but unfortunately I found it can not work with any Google applications and it can not add Google account and this is a very big problem for me, also it do not have any languages except English , Korean and Chinese. Can anybody help me? what should I do?
Click to expand...
Click to collapse
You will need to go through the process of learning how to root and unlock the phone. I hope there will be enough support or assistance for you on this site and that it being an N9006 won't be too problematic.
I am in China, but went out of my way to avoid the N9002, N9006, N9008 or any other variant they are selling here. I get my hands on the N9005 in a few days, so time will tell if it actually bloody works or not in China. It wouldn't surprise me to find that we are stuck in the same same boat on different shores...
---------- Post added at 05:30 AM ---------- Previous post was at 05:25 AM ----------
s327374 said:
You will need to go through the process of learning how to root and unlock the phone. I hope there will be enough support or assistance for you on this site and that it being an N9006 won't be too problematic.
I am in China, but went out of my way to avoid the N9002, N9006, N9008 or any other variant they are selling here. I get my hands on the N9005 in a few days, so time will tell if it actually bloody works or not in China. It wouldn't surprise me to find that we are stuck in the same same boat on different shores...
Click to expand...
Click to collapse
siamaknemati said:
Hi,
I've already bought a galaxy Note 3 n9006 from China and a day after it I came back to my country, but unfortunately I found it can not work with any Google applications and it can not add Google account and this is a very big problem for me, also it do not have any languages except English , Korean and Chinese. Can anybody help me? what should I do?
Click to expand...
Click to collapse
Actually the process looks like it might be easy enough for us:
http://techbeasts.com/2013/09/27/ho...ot-samsung-galaxy-note-3-all-versions-guide/#
Describes the way to do it.
Then you'll probably need to stick the most recent GAPPS on it, if it isn't already on it.
Good luck and have fun getting through the nervousness of rooting your first (I presume) device.
Cheers.
Should I return the n9006?
Hi there - I'm living in Shanghai and just found this thread. I bought the sm-n9006 today and was excited until I started reading about region locking and non-LTE versions,etc.
This is my first Android device so I'm super new but the bloatware on this thing is annoying! I wanted to remove this stuff and get some Google apps installed but I can't even find the Google play app to get started.
I'm concerned that because it's the mainland china version that this is going to be a bigger pain than it's worth. Should I wait a few months and have a family member buy a US model? Any other reasons to stay clear of this china model?
Is rooting the device a must if I want to get full access to apps, etc.?
Also, it seems this model does not have LTE. Is that correct? I ravel/stay in the US over summer holidays. Any help/advice is greatly appreciated!
gaylonalfano said:
Hi there - I'm living in Shanghai and just found this thread. I bought the sm-n9006 today and was excited until I started reading about region locking and non-LTE versions,etc.
This is my first Android device so I'm super new but the bloatware on this thing is annoying! I wanted to remove this stuff and get some Google apps installed but I can't even find the Google play app to get started.
I'm concerned that because it's the mainland china version that this is going to be a bigger pain than it's worth. Should I wait a few months and have a family member buy a US model? Any other reasons to stay clear of this china model?
Is rooting the device a must if I want to get full access to apps, etc.?
Also, it seems this model does not have LTE. Is that correct? I ravel/stay in the US over summer holidays. Any help/advice is greatly appreciated!
Click to expand...
Click to collapse
The bloatware won't be your main problem, it will be no access to google apps. I wouldn't worry about no LTE, you probably won't notice.
Importantly for Laowai, rooting is necessary, unless you are fluent in chinese, and can therefore use the Chinese markets and apps.
There are quite a few places online to find out how to unlock and root your device - this forum/link above/galaxynote3root.com/etc. I think you'll need about three to four hours of uninterrupted time (as a beginner), a pc (I've used a mac and it is annoying), fast-ish internet speed (to dowload the files), maybe a vpn to look at You tube clips that exemplify (eg, gfwvpn.com is handy and easy to install on both your computer and device), and only a small amount intellect.
You go through the process as above link or elsewhere, and then flash on an updated GAPPS zip if it isn't on the stuff you downloaded.
People here and elsewhere have really made it simple compared to when I first did mine (or maybe I have a little more knowledge). I'm only really just getting the hang of it all now and find it really enjoyable part of Android experience. Actually, just fell in love again with my S3 using CM... Wondering why I am going back to touch wiz, actually...
I'll know on Monday if it was the right choice for me after a day with the new giant phone.
Good luck.
Thanks for the post and information, I am new to android so it looks like I'll have to start doing my research. I am not fluent but certainly advanced so perhaps there are some Chinese options though I assume it'd be a better experience if I had it rooted instead.
Are you in SH by chance? I'd treat you to a coffee or something here in Pudong if so while you tutor me haha.
Thanks again for your help.
gaylonalfano said:
Thanks for the post and information, I am new to android so it looks like I'll have to start doing my research. I am not fluent but certainly advanced so perhaps there are some Chinese options though I assume it'd be a better experience if I had it rooted instead.
Are you in SH by chance? I'd treat you to a coffee or something here in Pudong if so while you tutor me haha.
Thanks again for your help.
Click to expand...
Click to collapse
Sorry, mate. I'm BJ ren. I'm certain you'd be able to find someone in Shanghai who can root an Andoid device with that offer though.
Good luck.
Hah, no problem. I love BJ but our work is in SH for now. If the air quality would get better up north I'd be pushing to move to BJ.
SM-N9006 More than root needed?
I have the same SM-N9006 purchased in China and now back in the USA. Most of the Chinese in the phone was converted to English through the normal settings. The problem is the Apps... they are all Chinese and need to be replaced with English versions. The current ROM blocks all access to the Google Play Store, even if it is side loaded, it is forcibly closed when opened.
Would it not be better to re-ROM the phone with a Samsung stock ROM that will work with the N9006 hardware? Is there such a ROM?
Please be specific on the steps (not the how to's) that need to be taken to use the N9006 in the USA with the Play Store Apps.
Much Thanks in advance, I'm also a newbie on a learning curve.
Support for Safe Rooting ( non-Warranty Voiding )
Just as a side note guys,
@designgears & @Chainfire have developed a warranty safe root for other versions of our phone already.
For all of you who already know about the problem with KNOX and voiding your warranty once you root your phone join me on these posts to get us freed from all the worry
http://forum.xda-developers.com/showthread.php?t=2479952&page=151
http://forum.xda-developers.com/showthread.php?t=2487916
I just got this Note 3 SM-N9006, I think mine is rooted that it has everything as if it's normal Note 3 in the US. But I note that it does not show that it connects using 4G/LTE. Does it have 4G/LTE, air command, etc ... capabilities to turn on somehow?
Is there an app that display what really inside your note, I mean the actual hardware of the phone?
N9006 doesn't have 4G/LTE. air command is ok
Sent from my N9005 using Tapatalk
ciditin said:
I just got this Note 3 SM-N9006, I think mine is rooted that it has everything as if it's normal Note 3 in the US.
Click to expand...
Click to collapse
Really? I wouldn't be too happy to buy a rooted phone from Samsung... you won't get one officially at least. Especially if you bought it in China that would mean its been messed with prior to you buying it. I like my phones coming rooted.
If you had them root it after them unboxing your phone ( hopefully not with Kingo App or some suspicious app that connects to the internet to do its thing ) then your fine. Provided you saw them unbox everything...its not a cheap phone.
If the serial numbers on the box and your phone match ( and the box has some Chinese ) then your fine.
If area under the removable battery didn't have any bright yellow sticker with lots of nasty looking Chinese text, then your fine.
If your in the U.S then its fine you don't need to worry about warranty.... as I am still currently in Shanghai I got mine official with a 2 year warranty.
Sorry if I sound too untrusting of phone sellers here. I have been told of the countless stories about how innocent people buy phones they assume are "new". Just recently I had to help my friend fight some store "official Samsung Store" owner for his replacement of a dead Note 2 dud ( you know those fake recycled phones that are sold in Shenzhen from HongKong that live for 4 months tops ).
HELP
I have a FAKE SM-N9006 (Thought was real coz I can access samsung app store). Thinking of installing CWM recovery which I did and now the phone keeps restarting after loading (not a bootloop, but continuous restarting. I can't flash nor restore as I can't no longer go into recovery mode through google MTK tools and hell no way of even entering download mode in the 1st place. Please HELP.:crying:
Jackwu696 said:
I have a FAKE SM-N9006 (Thought was real coz I can access samsung app store). Thinking of installing CWM recovery which I did and now the phone keeps restarting after loading (not a bootloop, but continuous restarting. I can't flash nor restore as I can't no longer go into recovery mode through google MTK tools and hell no way of even entering download mode in the 1st place. Please HELP.:crying:
Click to expand...
Click to collapse
do you still have the phone?....PM me please
China made SM-N9006
Hey I got my self a china made note 3. I would very much like to root it to get some bloat ware off, and to also find a android version 5 rom to feel like a cool kid.
It doesn't have a download mode, that is replaced by a Chinese factory mode.
SHARING IS CARING
RW
(Exhibit 4g 2 & Note 3 User)
Can N9006 run 3G or 4G SOMEHOW? Or is there no workaround?
Hello, I am having the same issue someone mentioned about not getting 4G (or even 3G) with the SM-N900 (model N9006) Chinese Note 3. I did not see a solution to the initial post, though. My phone does everything else, but running on Edge is pretty shoddy. I called T-Mobile (my carrier), and they made me enter some settings into the "access point names" tab (apn protocol, port number, etc.). This did not resolve the problem, unfortunately. The back of the phone, under the battery, says it is 3G WCDMA + GSM. T-Mobile runs on GSM, so it should work, I am absolutely stumped. As I said, all the apps work, and it is running Jelly Bean, it's just the slow as molasses internet that bugs me. Is there some sort of solution to this? I could not really find anything worthwhile on any Google searches. Thanks in advance! :fingers-crossed:
I have n9006 and when I type the star and hash key it Cannot display and when switch the data off it automatically switch on and I don't know what to do with the phone,I cannot use it
Hello, not exactly new to Android or Linux for that matter, but this has got me stumped.
I bought a Samsung Galaxy S5 from China because the seller conned me into thinking it was a g900v. It turns out its a Sm-G9006v. Android says it is 4.4.2 but other programs (Sysinfo, looking up the IMEI) tell me it is 4.2.2. So which do I believe? How do find out once and for all?
There are other little weird things about this phone and I'll explain if you'd like.
Sent from my SM-G9006V using XDA Premium 4 mobile app
Here's some shots of system info. First two are from android rest are from sysinfo
Sent from my SM-G9006V using XDA Premium 4 mobile app
GeneralRikan said:
I bought a Samsung Galaxy S5 from China because the seller conned me into thinking it was a g900v. It turns out its a Sm-G9006v. Android says it is 4.4.2 but other programs (Sysinfo, looking up the IMEI) tell me it is 4.2.2. So which do I believe? How do find out once and for all?
There are other little weird things about this phone and I'll explain if you'd like.
Click to expand...
Click to collapse
The additional information about anomalies would help. As you discerned, the system information screen looks legitimate, but SysInfo reports a fake i.e. MT6572/4.2.2. Which is correct?
One way to tell conclusively would be to run an extended benchmark suite. There would be a substantial difference in benchmark scores between a fake with a MT class processor and a legitimate G9006V (China Unicom S5). Alternately, you could look closely at the system files to discern if you actually have 4.2.2 or 4.4.2. Or multiple irreconcilable anomalies would.be compelling evidence of a fake.
.
Looking at the status bar icons it is pretty apparent this is not an original S5. Or maybe the seller rooted his device and changed the icons.
Also, it shows up as a Mediatek based device (mt6572). IT IS FAKE.
Hellscythe said:
Looking at the status bar icons it is pretty apparent this is not an original S5.
Click to expand...
Click to collapse
Since you're certain, can you provide a screenshot of a known legitimate China Unicom S5 for comparison?
If you've never seen a China unicom S5, then it's premature to declare it a fake before we really know. A different icon could easily be something that the carrier or a localized update effected.
.
fffft said:
Since you're certain, can you provide a screenshot of a known legitimate China Unicom S5 for comparison?
If you've never seen a China unicom S5, then it's premature to declare it a fake before we really know. A different icon could easily be something that the carrier or a localized update effected.
.
Click to expand...
Click to collapse
It's running a Mediatek chipset. It is 100% fake. No variant of the S5 uses a Mediatek chipset. Kernel version is also incorrect and Android version shows JDQ39 which is Jellybean. No version of the S5 runs on Jellybean.
Here is your requested image: http://i3.sinaimg.cn/IT/cr/2014/0319/1504933938.jpg sourced from: http://tech.sina.com.cn/mobile/n/2014-03-19/07359253359.shtml
I'm thinking this might be the phone you're talking about...
http://upnovo.com/?Wholesale-China-mobile-cell-smart-phone-cheap/Chinese-Copy-Samsung-Galaxy-S5-G9006-Clone-Replica.html
You're assuming that sysinfo is correct. And it is far from 100% reliable. I already stipulated earlier that it will be a fake if sysinfo turns out to be correct. The information page for the G9006V that you found after the fact is inconclusive with mostly oblique screen views.
The bottom line is that we don't know one way or the other for certain yet. You can cherry pick the evidence suggesting it's a fake if you wish. But there is no reasonable basis to say that the matter has been conclusively proven yet. The OP needs to benchmark the processor or another metric that will clearly distinguish between the two.
.
its fake, the android numbers is jelly bean 4.3 , the battery icon is a themed one.
Wrong cpu, wrong board, wrong buildnumber, a clear and obvious copy of a S5. Sorry for you dude. Try to get your money back if you can if you payed with your credit card because of fraud
Yeah, it's 199% fake. Get a refund if possible.
If you want to make it sure, try connecting it to a pc with kies3.
It's a fake, looking at the photo's, the phone is a dual sim phone, in china only the sm9008W and sm9009 are dual sim.
A fake..
Now here's the kicker, it has the heartbeat sensor, it has the fingerprint sensor. Do you think maybe the person I bought it from just flashed it with a wrong ROM?
Sent from my SM-G9006V using XDA Premium 4 mobile app
GeneralRikan said:
Now here's the kicker, it has the heartbeat sensor, it has the fingerprint sensor. Do you think maybe the person I bought it from just flashed it with a wrong ROM?
Click to expand...
Click to collapse
Despite a lot of dogmatic opinions in the thread, you still don't have enough information to know yet. You probably have a fake, but that isn't certain simply because a third party app says that you have Jelly Bean firmware and a MT processor. It's a fake if that information is correct, but it wouldn't be the first time that an app has reported erroneous information either.
Likewise, missing the heartrate or fingerprint sensors would be strong evidence of a fake. But the best quality clones do have working heartrate & fingerprint apps. The most damming evidence IMO is the kernel version which is suggestive of a clone. But I stand by my earlier advice. Had you run a benchmark suite, you'd already have a conclusive answer.
.
Hi all.
This is my first post so be gentle.
I have recently purchased an S8. I am diabetic and i use Abbott Freestyle Libre to monitor my blood sugar. Libre uses NFC technology and a specific reader. There are a lot of apps (including an official one : LibreLink (which is not yet available in my country)) to get the readings.
When i first opened the package (S8) the first thing i did was to install Glimp (app from play store) which does the same thing as the reader. Gets the readings via NFC. It worked fine at the time. Then a notification for update came along and i did it. Ever since NFC works fine with other devices apart from the sensor i have. Glimp does no longer work.
I did some research on the internet and found out that a lot of people have the exact same problem as i had.
I contacted Samsung support and told me it is Abboots fault. I called Abbott and told me its samsungs fault. I called Glimp HQ and told me "No S8!" (lol). LibreLink was even became unavailable through playstore because of that reason.
How i solved it:
I downloaded the original samsung ROM that the mobile came with and installed it via Odin. It was the earliest one. AQCA. Since it was an official samsung ROM, the KNOX was not triggered and i am still on 0 (good news). Glimp and NFC are working as they should without a problem with this firmware.
The thing is that i would like to be able to get the updates without fear of having to roll back on the first rom and do the tiring procedure of restoring and backing up over and over again.
Does anyone know what they did from the AQCA to AQDD regarding the NFC?
Has anyone else solved the issue with any other way than mine?
Thank you in advance.
Don't do the updates it's still doesn't work and we are the 5th of july
I have the same issue, just that I am only thinking about buying a phone.
Regarding LibreLink, there seem to be several discussions around the Galaxy S7/S8 phones and trouble around the current firmware (S8) and the current LibreLink version (S7). The solution seems to be: use an APK LibreLink (S7) or an older firmware (S8) until someone solved the problems. Glimp doesn't seem to work at all with the S7 (non-edge), but LibreLink seems to.
All very strange!
Can you help me regarding the S8, All these firmware names are rather cryptic for an outsider. How can i find out if the firmware is still available for a specific model.
(I am in Switzerland, will buy a non-branded phone).
thanks!!
Regarding S8 firmware
christian.ry said:
I have the same issue, just that I am only thinking about buying a phone.
Regarding LibreLink, there seem to be several discussions around the Galaxy S7/S8 phones and trouble around the current firmware (S8) and the current LibreLink version (S7). The solution seems to be: use an APK LibreLink (S7) or an older firmware (S8) until someone solved the problems. Glimp doesn't seem to work at all with the S7 (non-edge), but LibreLink seems to.
All very strange!
Can you help me regarding the S8, All these firmware names are rather cryptic for an outsider. How can i find out if the firmware is still available for a specific model.
(I am in Switzerland, will buy a non-branded phone).
thanks!!
Click to expand...
Click to collapse
I know it a strange problem.
Samsung messed it up real good this time.
Right now I am using only Glimp.
I have researched and did a lot of experiments to find out which firmware is ok to work with both applications.
Unfortunately, the earliest firmware that is for EU phones (Unlocked) is not early enough. There are other firmwares that came earlier to companies like Vodafone etc etc. These are the firmwares you need to download. Right now I am using the one that ends in AQCA, which is the earliest one. and it works fine.
I guess that you will have no problem flashing a firmware that is from another company (mine for example that it is the vodafone GR AQCA) and still work fine. The firmware you need is given by SwissCom and it is the same that I am using. No matter what you download make sure that the PDA ends in AQCA or AQC9.
Make sure that you flash ALL files from the firmware that you will download. Not just the AP, but all of them, else you will have different baseband versions and your phone would be messed up in different ways. And definitely, when the notification for update pops up, always choose LATER, or you will have to roll back again after the update is done.
Also, since it is an original firmware i guess, as it happened in my case too, the KNOX will not be triggered.
If you have any questions about how to do it, pm me, and i will be more than happy to help. It was really bad for me having an S8 and not be able to work with something so essential as blood monitoring which a 100$ lenovo would have no problem!!! I was ready to sell it.
That is actually helping a lot. For me it probably just means I won't buy the phone at all and since there is no reliable info on a high-end Android phone available, I will continue using the Freestyle-Reader.
But now that we're at it, do you know what the "AUT" in the other firmwares available for Switzerland means?
I understand the I'll need at least AQCA or AQC9, which is only available for the Swisscom formwares.
Since these are official firmwares, can the official Samsung tool (SmartSwitch) be used to flash them?
And thanks anyway, this was very helpful!
christian.ry said:
That is actually helping a lot. For me it probably just means I won't buy the phone at all and since there is no reliable info on a high-end Android phone available, I will continue using the Freestyle-Reader.
But now that we're at it, do you know what the "AUT" in the other firmwares available for Switzerland means?
I understand the I'll need at least AQCA or AQC9, which is only available for the Swisscom formwares.
Since these are official firmwares, can the official Samsung tool (SmartSwitch) be used to flash them?
And thanks anyway, this was very helpful!
Click to expand...
Click to collapse
Happy to help.
The AUT im not sure what it is but my guess is that has to do something with the region.
If you decide to finally buy the S8 then the only way to flash any ROM is the Odin application that circles around the net. Very easy to find.
Understand that this happens with S7 and S8 only and that is completely Samsungs fault.
I tried to work around with the freestyle libre reader when my S8 was updated and i did not find it useful at all. I had to always have the reader on me, where my S8 was already with me. I dont carry around a bag to have things in it and that is why it was not suitable for me. If you, on the other hand, have no problem carrying around the reader then i guess that having a libre-working phone pays no role.
SmartSwitch is a completely different tool. It only transfers data (contacts, logs, pictures, video, logs etc etc.) an not system, so this will not be in any case helpful.
Tip for reliable readings with Glimp:
Insert the blood levels from the reader into Glimp manually when u measure the blood sugar.
ex. You measure the blood sugar level with glimp and it states 100. The same minute measure the blood sugar lever with the freestyle libre reader and it states 88. Insert the 88 manually in to glimp the same moment you read it. That way the Glimp readjusts the algorithm that uses to better suit the readeer readings. After a day of re-adjustment the readings from Glimp are not so different from the reader. -5+ around.
If you need anything else, I ll be around and check this post regularly.
Other people need the information too, i guess.
Hey again,
I think we're having very much similar issues – I started with the reader when I got my first sensors and worked with it for about a year, which was great compared to the normal blood glucose measurements.
And now I am ready to change to Android (seems iOS will never happen) and realize that the Galaxy S4 that I am currently using (got it from a friend for free) is much more fidgety to use than the reader was.
By that I mean it can takes quite a while to get it realize the sensor and do the measurement, the reader did it in an instant. Is that similar with your S8? On the other hand I if course completely agree - having two devices to carry sucks, I just ask myself why is everyone making it so difficult for us?
There is another thread on reddit where someone also uses your method, I can share the link if necessary
Now - allow me two remaining questions:
- work with a firmware that cannot be updated – have you had any problems with other apps?
- how do I make sure the phone I buy in Switzerland will be able to use the UK firmware (or another)? You sound quite confident it will work though.
And finally – are you aware of any other state-of-the-art phone that actually does all this without issues? The only one I heard of is the S7 edge, but with other phones we are completely left alone with LibreLink. Doh. I even thought of creating a facebook page that collects information about that.
Now thanks again for your help, feels good to finally not be alone with the issue
christian.ry said:
Hey again,
I think we're having very much similar issues – I started with the reader when I got my first sensors and worked with it for about a year, which was great compared to the normal blood glucose measurements.
And now I am ready to change to Android (seems iOS will never happen) and realize that the Galaxy S4 that I am currently using (got it from a friend for free) is much more fidgety to use than the reader was.
By that I mean it can takes quite a while to get it realize the sensor and do the measurement, the reader did it in an instant. Is that similar with your S8? On the other hand I if course completely agree - having two devices to carry sucks, I just ask myself why is everyone making it so difficult for us?
There is another thread on reddit where someone also uses your method, I can share the link if necessary
Now - allow me two remaining questions:
- work with a firmware that cannot be updated – have you had any problems with other apps?
- how do I make sure the phone I buy in Switzerland will be able to use the UK firmware (or another)? You sound quite confident it will work though.
And finally – are you aware of any other state-of-the-art phone that actually does all this without issues? The only one I heard of is the S7 edge, but with other phones we are completely left alone with LibreLink. Doh. I even thought of creating a facebook page that collects information about that.
Now thanks again for your help, feels good to finally not be alone with the issue
Click to expand...
Click to collapse
Well, The readings with the sensor are so much faster than with the phone because the whole reader is an NFC antenna, where in the case of the phone you have to completely match the antenna surface with the sensors surface. Look up in the internet to find in which part of the phone (S4) is the NFC antenna located for better (faster) readings. As you look the back of the S4 is in the right side of the camera flash.
Yes, i have seen the reddit thread. Its pretty much the same as what i have done. Same problem - same solution.
There also been cases with S7 (not S7 edge) with the same problem. I dont know why Edge is working but the normal one does not.
As for other phones, the one that i was having before the S8 was the oneplus 3T (one of the greatest phones around - extremely powerful). Now oneplus launches the oneplus 5 (20 of June), which i believe will beat the S8 in benchmarks and performance. Oneplus 3T was better than S7. The good thing about oneplus is that you do not loose the warranty if you root it or flash a custom OS. Basically, there is no way to loose the warranty with oneplus whatsoever. And since its one of the most popular phones around the Android community, if the stock rom does not work (extremely unlikely) you can flash another one and still be in top ranks.
I can only suggest though, and be absolutely sure for, phones that i have tested. We have seen what happened with the S8. The one minute was working and after the update not so much... I could start a list and post the brand and the firmware of the phone of phones that work with Glimp (LibreLink is still unavailable in my country). But if it works with the one will work with the other.
As of the confidence that the firmware swapping will work:
I could try it on my phone and tell you.
I mean - my S8 was bought in Greece and it was a branded Vodafone phone. I could flash the SwissCom firmware that will supposedly work with the phone that you will buy and tell you.
Sadly for you (happily for me) I do not have a facebook page or any other social networking page to be part of it.
Hey again
Thanks for the a kind offer (flashing), but it is not necessary. I think I won’t go for the S8 until the issues are resolved or it at least is more clear.
I just tried an S7 with an older LibreLink Version (someone reported it works, I guess you’ve seen that too). It did exactly once, before destroying the sensor (I had only 1-2 days left, so thought I just give it a shot). But I should have known better ?
The OneTouch sounds indeed like a good option, let’s see how it finally looks!
Thanks for helping me!
christian.ry said:
Hey again
Thanks for the a kind offer (flashing), but it is not necessary. I think I won’t go for the S8 until the issues are resolved or it at least is more clear.
I just tried an S7 with an older LibreLink Version (someone reported it works, I guess you’ve seen that too). It did exactly once, before destroying the sensor (I had only 1-2 days left, so thought I just give it a shot). But I should have known better
The OneTouch sounds indeed like a good option, let’s see how it finally looks!
Thanks for helping me!
Click to expand...
Click to collapse
No problem.
There is a very informative list of devices in the website of Glimp somewhere that states which phone tend to destroy the sensors. I managed to find it once and never again.
The S8 has been tiring for me the past few days with all the problems it has and the problems that have yet to come. I didnt know that Samsung was that unreliable.
Thankfully the S8 is the TOP samsung phone right now in the market and i will have no problem selling it in a good price. I will return to the OnePlus which has the best customer service and no complex whatsoever regarding custom ROMs and device modifications.
I just hope samsung will make it up for all the trouble people have been through at some point.
Good luck all.
PS. In any point in the future, if someone has a problem with S8 devices regarding Glimp and how to make it work properly, feel free to pm me.
Seems like neither Samsung nor Glimp have any intentions to solve the matter.
I, therefore, sold my S8 and bought an LG G6.
My impression are way way better than the S8s.
The G6 NFC antenna is huge and it acts very similar to the reader, meaning that i do not have to get too close to get the reading. This is the only mobile phone that i have seen doing that.
I know that the G6 is worse than the S8 in many ways but it works so much better with the Freestyle.
Hello, I have the same problem and unfortunatelly I have to use old firmware.
I noticed that Samsung pushed new update (16.07.2017) - I found that on sammobile.
Have anyone tried this update (maybe they fixed nfc issue)?
The issue has been solved at least in my s8 librelink and glimp works with the last update
rulogo said:
The issue has been solved at least in my s8 librelink and glimp works with the last update
Click to expand...
Click to collapse
WOW!!!! It's great! This update prompt in notifications is so annoying...... Can you check in the settings exact version number? I mean G950FXXU1............... ?
Good news! Great news.
Someone in the Samsung company has been listening.
Good to know they take into consideration all that have been around.
I have already soled my S8 though so i cannot confirm it but i would take your word for it since you have been having the same problem with everyone else and it has been solved.
Cheers.
Now I can confirm that all issues are gone I installed new software G950FXXU1AQG5 (I'm from Poland, XEO version) and everything is ok.
LibreLink app usage
Hi,
I confirm that since the last software update, Samsung Galaxy S8 eventually is able to read the Freestyle Libre Sensors.
Although, can you share your experience on how do you use the official LibreLink application for countries which the android/iOS app has not yet been released?
I 've tried to download the android .apk with the check for the country disabled from apkpure.com, or even downloaded the official app via VPN (i.e. from Italy) but I got an error message for the compatibility of the country at the very beginning of the app.
Thus, I used the Lucky Patcher app to reproduce the official Italian valid version of the .apk by only removing the compatibility checks. Finally, I bypass the country check and I can proceed to read the sensor. But still I get another error: "Incompatible Sensor. This sensor cannot be used with this version of LibreLink."
Any ideas? Has anybody managed to do it successfully?
Thank you.
Acrobatis7 said:
No problem.
There is a very informative list of devices in the website of Glimp somewhere that states which phone tend to destroy the sensors. I managed to find it once and never again.
The S8 has been tiring for me the past few days with all the problems it has and the problems that have yet to come. I didnt know that Samsung was that unreliable.
Thankfully the S8 is the TOP samsung phone right now in the market and i will have no problem selling it in a good price. I will return to the OnePlus which has the best customer service and no complex whatsoever regarding custom ROMs and device modifications.
I just hope samsung will make it up for all the trouble people have been through at some point.
Good luck all.
PS. In any point in the future, if someone has a problem with S8 devices regarding Glimp and how to make it work properly, feel free to pm me.
Click to expand...
Click to collapse
The website you're looking for is this one most likely: deebee.it/?p=4959
Code:
=== Supported NFC Smartphones
LG_G3
LG_WATCH_URBANE_2
SAMSUNG_GALAXY_A3
SAMSUNG_GALAXY_ACE3
SAMSUNG_GALAXY_S3
SAMSUNG_GALAXY_S3_NEO
SAMSUNG_GALAXY_S4
SAMSUNG_GALAXY_S4_MINI
SAMSUNG_GALAXY_S7_EDGE
SAMSUNG_GALAXY_S8
SAMSUNG_GALAXY_S8_PLUS
=== Not Supported Smartphones
BLACKBERRY_Z10
=== Not recommended NFC Smartphones
HUAWEI_HONOR_V8
HUAWEI_NEXUS_6P
HUAWEI_P8_LITE
GOOGLE_PIXEL
LG_K8
LG_NEXUS_5
LG_NEXUX_5X
SAMSUNG_GALAXY_CORE_PRIME
SAMSUNG_GALAXY_GRAND_PRIME
SAMSUNG_GALAXY_A3_2016
SAMSUNG_GALAXY_J3
SAMSUNG_GALAXY_NOTE5
SAMSUNG_GALAXY_S7
SAMSUNG_GALAXY_YOUNG2
XIAOMI_MI5
XIAOMI_MIX
I know on some brands of devices like Samsung and LG you can use an app (or sometimes it'll even be listed in the settings) that will provide you with the actual device production date so I'm wondering if anyone knows if such an app exists for ZTE devices or if there's some other precise way to determine when a given device was actually manufactured?
I have a ZTE Zmax Pro and I'm thinking about getting a new battery for it - it's used, I'm probably the 3rd or 4th owner at this point and even though they released these devices a year ago in June 2016 I'd still like to know for sure when this one I have was made so I have a better idea of how much wear is on the battery.
If no such utility exists that's fine, was just wondering if the production date was someplace - it might be under the battery but I'm not interested in tearing this Zmax Pro apart just yet, it does have a slightly damaged glass front but the digitizer works 100% and I have a replacement on order so sometime next week I'll get around to doing the teardown and rebuild.
Thanks for any info...