Hello guys. There is a serious problem with nexus 4 booting process. Normally the phone always boots up after flashing custom/stock roms.
I was running nitrogen os. Flashed quanta reborn kernel. rebooted and then phone stuck in infinite bootanimation. I first thought this is because of kernel. Dirty flashed nitrogen to see it resolved. But nothing changed. After that i flashed dozens of roms to see any difference. But no luck with that too. I also flashed all factory images to fix it. After all those wipes and new roms. Its still stuck at infinite bootanimation. I think this is an emmc problem but i can mount,format and flash all partitions without an error. I checked all Q&A posts related to nexus 4 by the way. Still no fix for this issue. Thanks for any help from now.
FreeAgentNBS said:
Hello guys. There is a serious problem with nexus 4 booting process. Normally the phone always boots up after flashing custom/stock roms.
I was running nitrogen os. Flashed quanta reborn kernel. rebooted and then phone stuck in infinite bootanimation. I first thought this is because of kernel. Dirty flashed nitrogen to see it resolved. But nothing changed. After that i flashed dozens of roms to see any difference. But no luck with that too. I also flashed all factory images to fix it. After all those wipes and new roms. Its still stuck at infinite bootanimation. I think this is an emmc problem but i can mount,format and flash all partitions without an error. I checked all Q&A posts related to nexus 4 by the way. Still no fix for this issue. Thanks for any help from now.
Click to expand...
Click to collapse
What is the current state? Are you able to boot into fastboot?
What method did you try to restore factory images?
Nitin
I used the normal fastboot method to flash factory images. Flashed partitions one by one. No matter which rom i flash , the bootanimation never finishes loading. Not even showing the android is upgrading/starting dialog. By the way i can boot into recovery and fastboot
"flash-all.sh" (if using Linux). I found that you've got to run the script as manual flashing of partitions seemed to solve for me.
I've had this happen before.
If I recall, correctly, what i did:
1. Download the last factory image (LMY48T) for "occam" for Nexus 4
2. Uncompress the folder "occam-lmy48t-factory-416938f1.tgz"
3. Ensure ADB &/ Fastboot tools installed.
4. Plug in phone via USB to PC and boot to Nexus 4 bootloader;
Open terminal in uncompressed folder, and type:
"fastboot devices" - this should list your phone.
"flash-all.sh" (if using Linux). I found that you've got to run the script as manual flashing of partitions seemed to solve for me.
Hope this may assist you!
FreeAgentNBS said:
I used the normal fastboot method to flash factory images. Flashed partitions one by one. No matter which rom i flash , the bootanimation never finishes loading. Not even showing the android is upgrading/starting dialog. By the way i can boot into recovery and fastboot
Click to expand...
Click to collapse
Thank you for your response. I'm going to try it and return with results.
That method didn't work out. Result is same as normal flashing.
Am sorry to hear that. When using the script method, I recall it taking a surprisingly long time to boot to Android/Google setup. Perhaps give it a final try, and be prepared to wait up to 30 minutes. Am holding thumbs.
FreeAgentNBS said:
That method didn't work out. Result is same as normal flashing.
Click to expand...
Click to collapse
---------- Post added at 09:47 AM ---------- Previous post was at 09:38 AM ----------
Another thought; although it technically may be unnecessary, perhaps flash the latest TWRP for mako and wipe all partions (and format data), prior to running the script to flash the factory image.
FreeAgentNBS said:
That method didn't work out. Result is same as normal flashing.
Click to expand...
Click to collapse
I flashed latest twrp recovery 3.1.10 and used format data (which wipes all partitions including internal storage). Result was same.
And flashed latest 5.1.1 image again and wait about 1 hour 15 minutes. There was no luck . I'm planing to buy a broken screen nexus 4 for cheap price. And use the motherboard of it. Thank you for your time and effort.
Am holding thumbs you find a good deal and get it working. I did similar; bought 3 Nexus 4s for very little money, and the Nexus 2013 LTE. All running Android 7.1.2
I've used isopropyl alcohol & distilled water (half/half mix) and a tooth brush to gently clean mainboards before, and have had luck reviving some of them. Just avoid immersing screens or other components as liquids and solvents can harm them. Apparently isopropyl alcohol is what electronics manufacturers and servicing centers use to clean boards.
FreeAgentNBS said:
I flashed latest twrp recovery 3.1.10 and used format data (which wipes all partitions including internal storage). Result was same.
And flashed latest 5.1.1 image again and wait about 1 hour 15 minutes. There was no luck . I'm planing to buy a broken screen nexus 4 for cheap price. And use the motherboard of it. Thank you for your time and effort.
Click to expand...
Click to collapse
Related
Help me XDA, you're my only hope...
First, background: I bought my Nexus 4 over the internet, because it was never officially released in Belgium. I had to have the screen replaced, and let a 3rth party do it. Glass damage isn't covered by the warranty and it would mean sending my phone by international mail if i used the official warranty people. They told me that the also had to replace the proximity sensor.
My phone worked perfectly afterwards. Until I tried to install the automatic upgrade to 4.3.
First it stopped at the X-logo screen and became very hot. I contacted play support and did all the things they advised (including a factory reset, rebooting in safe mode), none of it works. I found someone with the same problem who managed to get past the X-screen by flashing back the 4.2.2 radio version. And that worked: the phone booted and the update started.
However, since that moment I got a lot of problems:
- random shutdowns
- random locking of the SIM card
- phone not starting unless plugged in charger.
Worst of all, reflashing stock images for 4.2 and 4.2.2 or AOKP does nothing to solve these problems. I also tried a new SIM card, and still nothing.
I'm at my wit's end now. Could there be a driver issue? Any other things I can try?
TIA
Possibly a driver issue and also reflashing does not help meaning that you need to flash an other kernel.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Possibly a driver issue and also reflashing does not help meaning that you need to flash an other kernel.
Click to expand...
Click to collapse
any suggestions for a good kernel that can run stock android?
If your goal was to upgrade to stock 4.3, you can follow efrant's guide to flash the factory image at at http://forum.xda-developers.com/showthread.php?t=2010312&highlight=efrant. Just be sure to download the JWR66V image and use the updated file names when you flash since the file names in this guide are for the Android 4.2 image.
BobWalker said:
If your goal was to upgrade to stock 4.3, you can follow efrant's guide to flash the factory image at at http://forum.xda-developers.com/showthread.php?t=2010312&highlight=efrant. Just be sure to download the JWR66V image and use the updated file names when you flash since the file names in this guide are for the Android 4.2 image.
Click to expand...
Click to collapse
Well, I tried again. (For the 6th time this month) No different as before: it's been stuck on the X screen for 20 minutes now and getting warmer.
EDIT: I finally managed to get into the recovery menu. No idea why it wouldn't let me use volume up + power...
As suggested in the guide I deleted cache and a factory wipe.
My phone is still stuck at the X screen...
any other suggestions, anyone?
Joenr76 said:
As suggested in the guide I deleted cache and a factory wipe.
My phone is still stuck at the X screen...
any other suggestions, anyone?
Click to expand...
Click to collapse
Try installing PA 3.97 with this kernel: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-Kernel-4.3_JWR66V_HALFBREED.zip
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Try installing PA 3.97 with this kernel: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-Kernel-4.3_JWR66V_HALFBREED.zip
Click to expand...
Click to collapse
I never did that before: do I flash the kernel first or the Rom first? Are there any guides?
EDIT: I just read that Paranoid Android comes with the halfbreed kernel included. Is that the one you linked too?
Before jumping into the kernel thing (also because i wanted to be able to work with a device that can actually boot), I reinstalled the 4.2.2 factory image. It took about 5 minutes for the first shutdown to happen. *sigh*
And without plugging it in, it goes into a boot loop (going to x screen for a while, then restarting.) When I plug it in, it starts immediately, but shows the battery as empty. It was 63% when it shut itself down.
It's a clean install, I just don't understand...
Okay so, I'm assuming you have a custom recovery like TWRP. Open it and flash the newest boot loader and radio. Then flash Paranoid Android and GApps. Then try flashing Faux kernel and clearing cache/dalvik. If you still have problems, then I have no idea
Sent from my Nexus 4 using xda premium
Open up your phone to see the battery is securely checked and to see if all the components are okay. Then look do a full wipe of cache,dalvik,system,data,and sd (internal storage). Then use wugs toolkit to a upgrade on a clean flash. Double check to make sure you wipe everything!
Sent from my Nexus 4 using Tapatalk 4
TheNerd:] said:
Open up your phone to see the battery is securely checked and to see if all the components are okay.
Click to expand...
Click to collapse
Apparently, my battery had expanded so much that it was pushing at everything in the phone. I ordered a new one and put it in. In 4.2.2 I have no problems anymore with random shut-downs.
However, when I run the OTA upgrade, the phone stays on the X-logo screen. Just like last time. I expect that was why the battery got blown: the first time I ran the OTA, I did it at night and only checked the phone in the morning.
I fixed my N4 by reflashing an older radio (48, IIRC). I have no idea why the newest radio won't work...
Joenr76 said:
Apparently, my battery had expanded so much that it was pushing at everything in the phone. I ordered a new one and put it in. In 4.2.2 I have no problems anymore with random shut-downs.
However, when I run the OTA upgrade, the phone stays on the X-logo screen. Just like last time. I expect that was why the battery got blown: the first time I ran the OTA, I did it at night and only checked the phone in the morning.
I fixed my N4 by reflashing an older radio (48, IIRC). I have no idea why the newest radio won't work...
Click to expand...
Click to collapse
Try flashing 4.3 via the factory image. Then use this guide to flash the factory image to the phone.
tykate said:
Try flashing 4.3 via the factory image. Then use this guide to flash the factory image to the phone.
Click to expand...
Click to collapse
Tried that before. I did some research and I guess this is relevant: http://www.androidpolice.com/2013/0...rops-on-some-nexus-4-handsets-fixes-in-sight/ Especially since I ordered my Nexus from the Netherlands.
I'll have to wait until that bug gets fixed until I can upgrade my radio.
I am not new to ROMs and flashing etc., but I am completely stumped on this one. I have looked everywhere I know to look (supposedly) but if you find some easily locatable solution that I have missed, please feel free to call me mean names and share the solution with me. Otherwise, this is what I have tried so far (I will start from the beginning):
First, the 4.3 OTA update bricked my phone. I hadn't rooted my N4 yet because it was an updrage from D1 (yes, big jump). I decided to root the phone and install a custom ROM. Can't be too hard right? Its a Nexus for crying out loud. WRONG. Well I rooted pretty easily, and installed my first custom ROM for N4. To install this ROM, I had to erase boot.img, system.img, and userdata.img and then flash each individually from the ROM zip file I downloaded. This worked! I was winging it and it worked out. However, from then on, EVERY ROM I tried to install ended up in a bootloop. I have wiped cache/data, dalvik cache, and even my own (c)ache before flashing new ROM. They all end in bootloop (never ending).
I am able to revert to stock 4.2 easily every time. However, any attempt at installing a custom ROM from there is void. Today I downloaded 4.4.2.tgz from google and ran flash-all.bat. Everything works great! Until I try to boot up; bootloop. I fastboot format this and fastboot erase that, then fastboot flash each .img individually. I fastboot flash new radio, new kernel, etc. etc. but still bootloop.
I really am clueless as to what I am doing wrong or how I screwed myself somewhere along the way, but I am humbly coming before my superiors and asking for help. Please offer me the simplest solution and call me dumb for not seeing it, I will hold you in my heart 4eva
CausableMidget said:
I am not new to ROMs and flashing etc., but I am completely stumped on this one. I have looked everywhere I know to look (supposedly) but if you find some easily locatable solution that I have missed, please feel free to call me mean names and share the solution with me. Otherwise, this is what I have tried so far (I will start from the beginning):
First, the 4.3 OTA update bricked my phone. I hadn't rooted my N4 yet because it was an updrage from D1 (yes, big jump). I decided to root the phone and install a custom ROM. Can't be too hard right? Its a Nexus for crying out loud. WRONG. Well I rooted pretty easily, and installed my first custom ROM for N4. To install this ROM, I had to erase boot.img, system.img, and userdata.img and then flash each individually from the ROM zip file I downloaded. This worked! I was winging it and it worked out. However, from then on, EVERY ROM I tried to install ended up in a bootloop. I have wiped cache/data, dalvik cache, and even my own (c)ache before flashing new ROM. They all end in bootloop (never ending).
I am able to revert to stock 4.2 easily every time. However, any attempt at installing a custom ROM from there is void. Today I downloaded 4.4.2.tgz from google and ran flash-all.bat. Everything works great! Until I try to boot up; bootloop. I fastboot format this and fastboot erase that, then fastboot flash each .img individually. I fastboot flash new radio, new kernel, etc. etc. but still bootloop.
I really am clueless as to what I am doing wrong or how I screwed myself somewhere along the way, but I am humbly coming before my superiors and asking for help. Please offer me the simplest solution and call me dumb for not seeing it, I will hold you in my heart 4eva
Click to expand...
Click to collapse
This is why once I have my phone rooted, there's no turning back to stock.
Are you sure that you wiped system, along with everything else between adventures? (factory reset via recovery)
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
This is why once I have my phone rooted, there's no turning back to stock.
Are you sure that you wiped system, along with everything else between adventures? (factory reset via recovery)
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
Yes. I even just did it again to make sure, but I am still watching the beautifully colored circles fold in on themselves.
CausableMidget said:
Yes. I even just did it again to make sure, but I am still watching the beautifully colored circles fold in on themselves.
Click to expand...
Click to collapse
Ok, gonna make a suggestion, and it's totally on you if you want to take it, and of course I won't be held responsible. I have had a bootloop or two on my G2 (the original), I would get impatient and pull the battery. (wish the Nexus 4 had a removable battery) Without fail, that cured the bootloop. Just remember, that was a G2, not a Nexus 4.
Don't ask me why it worked because I have no clue.
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
Ok, gonna make a suggestion, and it's totally on you if you want to take it, and of course I won't be held responsible. I have had a bootloop or two on my G2 (the original), I would get impatient and pull the battery. (wish the Nexus 4 had a removable battery) Without fail, that cured the bootloop. Just remember, that was a G2, not a Nexus 4.
Don't ask me why it worked because I have no clue.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
I have cycled power a few times during the boot to no avail. I also just reverted back to stock 4.2 and then installed OTA 4.3 update hoping outcome would be different (definition of insanity according to Vaas). I don't know what to do. It's just not in me to run 4.2 forever
CausableMidget said:
I have cycled power a few times during the boot to no avail. I also just reverted back to stock 4.2 and then installed OTA 4.3 update hoping outcome would be different (definition of insanity according to Vaas). I don't know what to do. It's just not in me to run 4.2 forever
Click to expand...
Click to collapse
Have you tried calling an Exorcist?
I've run out of ideas!
Sent from my Nexus 7 (2013)
Heads up, this is a bit of reading
Ok so two nights ago, I was messing with the phone a little bit attempting to put Google Assistant on the phone. I had gotten a new cable from Amazon which enabled me to finally plug my 6P into the computer and my bootloader was already unlocked as I did so before but the issue was that I didn't have twrp yet on my phone. After I got it all set up with adb/fastboot etc. I tried to flash twrp. It didn't work, I kept getting stock recovery to come up so I ended up chalking it up for another day. As I was watching my beloved school lose in the Rose Bowl, I realized that the phone was rebooting. Not sure why but it just started doing it. After that, the phone turned on after rebooting for about 45 mins and it stood on for about 10 mins. After that, it went back to bootlooping and did so without getting to the android boot up screen all night.
Pissed, I decided to try to fix it myself but after I woke up, I found the recovery to be inaccessible through the bootloader which I could previously enter even through all of the bootlooping. After the bootlooping started, I couldn't flash a recovery so figuring it was the new cable, I switched to the older one. Well after doing that, I was able to flash the stock recovery and get adb working again. Using a guide, I flashed the newest factory image that was just released which is N4F26J (my phone was on the NMF26F update), and after a few bootloops, the phone turned on!
Ecstatic, I skipped past all the setup screens and went immediately to developer options and I activated usb debugging. Shortly after this, the bootlooping restarted and I wasn't able to get it to get back to the phone. Using the Wugs toolkit, I continued to use that to get the factory images on the Nexus and usually after I would use it to flash the ota, it would reboot a few times and get to the welcome screen where I could use the phone for about 5 mins. before it started bootlooping again. Fearing it was just Google's OTAs, I switched ROMs using twrp and adb to this ROM https://forum.xda-developers.com/nexus-6p/development/rom-debloated-prerooted-deoxeded-t3372600 (All Credit For The Rom Goes To Him), and after a few reboots, I got it up and running but after a few mins, the bootlooping started again. I noticed that when I use the toolkit to get into the twrp recovery, it constantly says in Red Letters about it not being able to mount storage.
If anyone please can help me figure this out, I would really really appreciate it. I can't send it to Huawei because it has a very slight crack on the screen and with me being a college student, I can't afford the $160 that they want to replace it. Somebody please give me any type of insight so I can try to fix this on my own. Please
btw before every flash, I followed all steps you should with wiping cache, dalvik, etc. Not sure if that would make a difference
Exbruce said:
Heads up, this is a bit of reading...
Click to expand...
Click to collapse
Since you are familiar with NRT, I would start by running Advanced Utilities and fastboot FORMAT cache, system and userdata. Then go back to Flash Stock+ Unroot. Make sure you are set on at least NMF26F if Wug hasn't already updated to N4F26J yet. Flash stock. That should get you back up and running. There are other ADB options from the PC if this doesn't work for you.
v12xke said:
Since you are familiar with NRT, I would start by running Advanced Utilities and fastboot FORMAT cache, system and userdata. Then go back to Flash Stock+ Unroot. Make sure you are set on at least NMF26F if Wug hasn't already updated to N4F26J yet. Flash stock. That should get you back up and running. There are other ADB options from the PC if this doesn't work for you.
Click to expand...
Click to collapse
Ok I'll give it a shot and let you know how it goes.
Exbruce said:
Ok I'll give it a shot and let you know how it goes.
Click to expand...
Click to collapse
I think the problem you had with TWRP not sticking on Nougat is that you need to flash SuperSU after or the phone will revert back to stock recovery. Not that it helps with your boot loop issue.
v12xke said:
Since you are familiar with NRT, I would start by running Advanced Utilities and fastboot FORMAT cache, system and userdata. Then go back to Flash Stock+ Unroot. Make sure you are set on at least NMF26F if Wug hasn't already updated to N4F26J yet. Flash stock. That should get you back up and running. There are other ADB options from the PC if this doesn't work for you.
Click to expand...
Click to collapse
Tried it and no dice. Hasn't stopped bootlooping for the past hour
I think you have the issue aoy of us are having which after three or four days I have not been able to fix. RMA with Huawei maybe the only way out of it.
Sorry man it doesn't look good.
v12xke said:
Since you are familiar with NRT, I would start by running Advanced Utilities and fastboot FORMAT cache, system and userdata. Then go back to Flash Stock+ Unroot. Make sure you are set on at least NMF26F if Wug hasn't already updated to N4F26J yet. Flash stock. That should get you back up and running. There are other ADB options from the PC if this doesn't work for you.
Click to expand...
Click to collapse
galakanokis said:
I think you have the issue aoy of us are having which after three or four days I have not been able to fix. RMA with Huawei maybe the only way out of it.
Sorry man it doesn't look good.
Click to expand...
Click to collapse
Yeah it sucks simply because I've managed to get it from not booting to recovery to booting to the Rom but it just won't stick. This is hands down the worst experience I've ever had with a phone. The fact that Huawei wont replace it without that $160 is ridiculous to me because I've really done nothing wrong with it, it just konked out leaving me without a phone. Wow
Its probably google trying to force us into a pixel phone. If my 6p eats it, im done with Google phones. I love this phone. Its the best ive ever had. I'd definitely pay 160 for another if they could assure me no more bootloops. It sucks for people that can't afford it.
Exbruce said:
..... After the bootlooping started, I couldn't flash a recovery so figuring it was the new cable, I switched to the older one. Well after doing that, I was able to flash the stock recovery and get adb working again. Using a guide, I flashed the newest factory image that was just released which is N4F26J (my phone was on the NMF26F update), and after a few bootloops, the phone turned on!
Ecstatic, I skipped past all the setup screens and went immediately to developer options and I activated usb debugging. Shortly after this, the bootlooping restarted and I wasn't able to get it to get back to the phone. Using the Wugs toolkit, I continued to use that to get the factory images on the Nexus and usually after I would use it to flash the ota, it would reboot a few times and get to the welcome screen where I could use the phone for about 5 mins. before it started bootlooping again. Fearing it was just Google's OTAs, I switched ROMs using twrp and adb to this ROM https://forum.xda-developers.com/nexus-6p/development/rom-debloated-prerooted-deoxeded-t3372600 (All Credit For The Rom Goes To Him), and after a few reboots, I got it up and running but after a few mins, the bootlooping started again. I noticed that when I use the toolkit to get into the twrp recovery, it constantly says in Red Letters about it not being able to mount storage.
Click to expand...
Click to collapse
There well may well be a hardware problem with your device BUT I read your post again and I see a few possibilities. One is that you may have been using an unreliable data cable, and you didn't mention hash checking files before flashing. Second, it sounds like you had installed a factory image, and afterwards applied an OTA to the phone (and then a custom rom). Once you apply the full N4F26J image, there is no need use any OTA! Start with the latest image. Lastly, your data became encrypted when you booted the first time so you are getting mounting errors in TWRP. My advice would be to reformat again as above, manually download the full factory image N4F26J and use NRT to install it. NRT has not updated the toolkit yet, so you will have to d/l manually. NRT should hash check the file you downloaded. Use the bricked mode to Unroot+Flash Stock. You never mentioned running unencrypted, so I assume the default encryption is what you want. The idea is to attempt to get you back to stock with a device free from bootloops. If this doesn't work, then you'll need to use ADB.
v12xke said:
There well may well be a hardware problem with your device BUT I read your post again and I see a few possibilities. One is that you may have been using an unreliable data cable, and you didn't mention hash checking files before flashing. Second, it sounds like you had installed a factory image, and afterwards applied an OTA to the phone (and then a custom rom). Once you apply the full N4F26J image, there is no need use any OTA! Start with the latest image. Lastly, your data became encrypted when you booted the first time so you are getting mounting errors in TWRP. My advice would be to reformat again as above, manually download the full factory image N4F26J and use NRT to install it. NRT has not updated the toolkit yet, so you will have to d/l manually. NRT should hash check the file you downloaded. Use the bricked mode to Unroot+Flash Stock. You never mentioned running unencrypted, so I assume the default encryption is what you want. The idea is to attempt to get you back to stock with a device free from bootloops. If this doesn't work, then you'll need to use ADB.
Click to expand...
Click to collapse
Ok I'll give it a shot and let's see how this goes *fingers crossed*
UPDATE: Gave it a shot and it booted up to the welcome screen for about 2 mins and then started the bootloop all over again. Looks like the only option is to RMA the device at this point
Exbruce said:
Ok I'll give it a shot and let's see how this goes *fingers crossed*
UPDATE: Gave it a shot and it booted up to the welcome screen for about 2 mins and then started the bootloop all over again. Looks like the only option is to RMA the device at this point
Click to expand...
Click to collapse
Your phone is worth a lot more than 160.00 so it's probably best to RMA even if the charge seems unfair. You could always sell the RMA phone for a lot more than 160.00 if you've had enough of the 6P.
Exbruce said:
UPDATE: Gave it a shot and it booted up to the welcome screen for about 2 mins and then started the bootloop all over again. Looks like the only option is to RMA the device at this point
Click to expand...
Click to collapse
Sorry to hear that. Not ready to throw in the towel?
Have you tried doing a factory reset after the latest bootloop?
Any errors when formatting the 3 partitions, or during the flash process?
It could be looping for some reason during the initial encryption process which happens during first boot. I would try using a "no force-encrypt" modified boot.img before booting the first time to prevent the encryption process. If you prevent encryption, you may prevent the bootloop. You can find the boot.img on this forum, or use Wug's from the previous build, or even flash SU 2.79 to modify your boot.img.
If that doesn't work, you could try extracting files you need from the factory image, fastboot format and flash img files manually, including the modified boot.img.
Hi All!
I seem to be stuck in a bootloop on my 6P. I was running the latest Pure Nexus build, and I was having a bit of trouble with some apps, so I decided to reboot into TWRP and wipe the cache. After booting up again, everything seemed normal. The phone was running for a minute or so, and it just shut off. After that, it just keep rebooting. It's not a normal bootloop. I do not reach the animation, I only get to the screen where it says "google" and has the unlocked padlock symbol on the bottom. After that, it starts all over again with the "cannot check for corruption screen."
To be very clear: I can't boot anything at all, including recovery. I have tried flashing multiple versions of TWRP and multiple versions of the stock recovery.
Here is what I've tried so far:
I have flashed back to the latest 7.1.1 release both manually and using the flash all command
I used fastboot to erase the system, cache, boot, and userdata. I ran the commands normally and also with -w.
I've tried to flash an older version of android - 6.0, I think.
Nothing seems to work. I haven't made it to the boot animation once since it shut down.
I also left it on the charger all night just to be sure. The battery was at about 75% when it shut down.
Thanks!
RMA bro.
mtpease said:
Hi All!
I seem to be stuck in a bootloop on my 6P. I was running the latest Pure Nexus build, and I was having a bit of trouble with some apps, so I decided to reboot into TWRP and wipe the cache. After booting up again, everything seemed normal. The phone was running for a minute or so, and it just shut off. After that, it just keep rebooting. It's not a normal bootloop. I do not reach the animation, I only get to the screen where it says "google" and has the unlocked padlock symbol on the bottom. After that, it starts all over again with the "cannot check for corruption screen."
To be very clear: I can't boot anything at all, including recovery. I have tried flashing multiple versions of TWRP and multiple versions of the stock recovery.
Here is what I've tried so far:
I have flashed back to the latest 7.1.1 release both manually and using the flash all command
I used fastboot to erase the system, cache, boot, and userdata. I ran the commands normally and also with -w.
I've tried to flash an older version of android - 6.0, I think.
Nothing seems to work. I haven't made it to the boot animation once since it shut down.
I also left it on the charger all night just to be sure. The battery was at about 75% when it shut down.
Thanks!
Click to expand...
Click to collapse
Can you get to the bootloader?
I'm going to go out on a limb and say if you flash a factory image and get no errors but it's still boned the way you described then RMA if your answer. Your in an every growing boat!!
Sent from my Nexus 6P using XDA-Developers Legacy app
jhs39 said:
Can you get to the bootloader?
Click to expand...
Click to collapse
Yeah, I can get in to the bootloader just fine. I can flash anything I want wit no errors. I just can't boot anything.
CyberpodS2 said:
I'm going to go out on a limb and say if you flash a factory image and get no errors but it's still boned the way you described then RMA if your answer. Your in an every growing boat!!
Sent from my Nexus 6P using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah, google agrees with me. They've sent me a new phone. I wish I could have found a solution, though.
mtpease said:
Yeah, google agrees with me. They've sent me a new phone. I wish I could have found a solution, though.
Click to expand...
Click to collapse
Glad your warranty worked for you. Pure Nexus seems to be a recurring factor in several threads. I've never used it myself. Over in this thread, an experienced user ran into a bootloop that would not clear with a fresh wipe and installation with flash-all.bat or even flashing partitions manually. Flash-all.bat finished with no errors but still looping. As a last resort he used Skipsoft's Toolkit to re-install stock and it worked. The toolkit script formats userdata and cache and this appears to be what solved the problem. Interestingly, he was able to reproduce the problem with PN. After installing it, he went into a bootloop again and the toolkit again got him back to stock. So, others that are stuck in a bootloop especially after running or updating PN should try formatting userdata and cache, or use the toolkit.
So i wanted to go for some Pie rom and it turns out i cannot do that because reasons. Done everything that was listed in instructions, done even more things like flashing stock image, wiping everything, flashing fbe recovery, wiping everything again (besides recovery ofc), then pushing the rom to /sdcard, flashing it, wiping internal storage. It doesnt really matter what i do and what rom do i flash. Every time i end up staring at Google's boot logo (AOSPExtended is stuck at boot animation). I know there is a line like "be patient" in the instructions, but my patience had to come to an end eventually and it was after like 2 hours of boot logo, and another 2 hours of AOSPEX's boot animation. The phone is not heating up, but it would crash on the 1st phase of boot animation and reboot till infinity after restoring TWRP backup. I really wanted to use Pie, but i have run out of ideas on how to make it boot.
It's really an unusual case. But I had it on my previous phone, the LG Optimus G. I'm from stock 4.4 and every higher Android version rom won't boot on my phone. I gave it up but two months later, I tried again and bizarrely, It boot fine without any reasons. Sorry I can't help you what the problem is, but I can only tell you that you can try Pie roms a few time later and wait for you luck
Kornafee said:
So i wanted to go for some Pie rom and it turns out i cannot do that because reasons. Done everything that was listed in instructions, done even more things like flashing stock image, wiping everything, flashing fbe recovery, wiping everything again (besides recovery ofc), then pushing the rom to /sdcard, flashing it, wiping internal storage. It doesnt really matter what i do and what rom do i flash. Every time i end up staring at Google's boot logo (AOSPExtended is stuck at boot animation). I know there is a line like "be patient" in the instructions, but my patience had to come to an end eventually and it was after like 2 hours of boot logo, and another 2 hours of AOSPEX's boot animation. The phone is not heating up, but it would crash on the 1st phase of boot animation and reboot till infinity after restoring TWRP backup. I really wanted to use Pie, but i have run out of ideas on how to make it boot.
Click to expand...
Click to collapse
Did you format data? Not wipe. Format.
pe81ge said:
Did you format data? Not wipe. Format.
Click to expand...
Click to collapse
How do i do that?
Kornafee said:
How do i do that?
Click to expand...
Click to collapse
By reading the flash instructions CAREFULLY.
Format data after flashing. It's the button next to advanced wipe button.
pe81ge said:
By reading the flash instructions CAREFULLY.
Format data after flashing. It's the button next to advanced wipe button.
Click to expand...
Click to collapse
Then yeah, I did it.
Did you ever get this working? I'm having the exact same issue. I've tried several Pie Roms and so far no luck getting past the boot animation.
Oreo Roms work and boot up quick. I've updated to the latest TWRP as well. Is there a v9 Vendor Image we can try flashing?
---------- Post added at 12:13 PM ---------- Previous post was at 12:07 PM ----------
Did you ever get this working? I'm having the exact same issue. I've tried several Pie Roms and so far no luck getting past the boot animation.
Is there a v9 Vendor Image we can try flashing maybe?
Sniggity said:
Did you ever get this working? I'm having the exact same issue. I've tried several Pie Roms and so far no luck getting past the boot animation.
Oreo Roms work and boot up quick. I've updated to the latest TWRP as well. Is there a v9 Vendor Image we can try flashing?
Click to expand...
Click to collapse
Didn't really have time to mess with this lately, as i need my phone up 24/7, but i tried to get this working as soon as first Pie ROM's started to come out. Couldn't get it working then, and 2nd time was about the time i created this post.
The lastest vendor image is OPM7.181205.001, Dec 2018, as far as i know, so... We are kinda stuck with 8.1.0 for now.