Hi, I would like to unroot my A3 2015 with the following specs:
PRODUCT NAME: SM-A300F
CURRENT BINARY SAMSUNG OFFICIAL
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0X1 (3)
I think the KNOX was tripped because I downgraded my phone to KITKAT and now I would like to make it official so that I could make it LOLLIPOP again so that I can sell it. Is there any way to unroot it?
Flash stock rom using odin
KMXSLR said:
Flash stock rom using odin
Click to expand...
Click to collapse
But it will increase the flash counter, is it safe?
Brocker7 said:
But it will increase the flash counter, is it safe?
Click to expand...
Click to collapse
Your counter is already tripped, and you can't "un-trip" it. Just download your firmware in .tar.md5 for your country from AndroidFileHost, then you'll have back a pure stock and unrooted android. But your flash counter cannot change now, your warranty is void.
KMXSLR said:
Your counter is already tripped, and you can't "un-trip" it. Just download your firmware in .tar.md5 for your country from AndroidFileHost, then you'll have back a pure stock and unrooted android. But your flash counter cannot change now, your warranty is void.
Click to expand...
Click to collapse
Oohh okay. Can I already safely update (OTA) it to Lollipop??
There is not "safely", just update using Odin if the OTA isn't proposed.
Odin isn't dangerous, just check "F. reset time" and "Auto Reboot", nothing more (you can check "Nand Erase All" if you want to get a clean phone and lose all ur files)
KMXSLR said:
There is not "safely", just update using Odin if the OTA isn't proposed.
Odin isn't dangerous, just check "F. reset time" and "Auto Reboot", nothing more (you can check "Nand Erase All" if you want to get a clean phone and lose all ur files)
Click to expand...
Click to collapse
Will it not hard brick my phone? Just asking man cuz Im’ma sell it and the buyer wants it to be Lollipop
KMXSLR said:
Your counter is already tripped, and you can't "un-trip" it. Just download your firmware in .tar.md5 for your country from AndroidFileHost, then you'll have back a pure stock and unrooted android. But your flash counter cannot change now, your warranty is void.
Click to expand...
Click to collapse
Kitkat or Olipop firmware?
Related
Hi everyone, I'm desperate here.
I was following DJembey's root method TO THE WORD/LETTER. Everything was fine up until the last bit in changing the 'custom' status to official. The triangle away method didn't work, so I downloaded the 'OFFICIAL_STATUS_MOD' and used odin to try and flash the PDA, but it came up as 'FAIL' and now my phone is stuck on boot mode with 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE'. I've tried using odin to flash back to the stock rom, but it keeps coming up with 'FAIL'. Rally need help
DJembey's root method:
http://forum.xda-developers.com/showthread.php?t=2255190
jesus1987 said:
Hi everyone, I'm desperate here.
I was following DJembey's root method TO THE WORD/LETTER. Everything was fine up until the last bit in changing the 'custom' status to official. The triangle away method didn't work, so I downloaded the 'OFFICIAL_STATUS_MOD' and used odin to try and flash the PDA, but it came up as 'FAIL' and now my phone is stuck on boot mode with 'FIRMWARE UPGRADE ENCOUNTERED AN ISSUE'. I've tried using odin to flash back to the stock rom, but it keeps coming up with 'FAIL'. Rally need help
DJembey's root method:
http://forum.xda-developers.com/showthread.php?t=2255190
Click to expand...
Click to collapse
what firmware you are trying to root, and what stock firmware you tried to flash?
Here's what it says, this is the firmware I am trying to flash, but just before I did the root guide, I applied all of the official updates through settings >about phone > update, etc. It was still on 4.2.2 and I think it was october edition of the latest firmware (in UK)
samersh72 said:
what firmware you are trying to root, and what stock firmware you tried to flash?
Click to expand...
Click to collapse
So maybe I am trying to flash to an older firmware, is this not allowed?? Also, it says that the PIT partition is missing on ODIN (as seen on the attached picture)
jesus1987 said:
So maybe I am trying to flash to an older firmware, is this not allowed?? Also, it says that the PIT partition is missing on ODIN (as seen on the attached picture)
Click to expand...
Click to collapse
i think you have the secured bootloader (check if you have Knox void 0x0 or something in download mode) if yes, you can not go back to MDM or an old firmware, you can flash new "knoxed" firmware.
note that Triangle away and other stuffs to reset counter or status, wont work on new firmware.
samersh72 said:
i think you have the secured bootloader (check if you have Knox void 0x0 or something in download mode) if yes, you can not go back to MDM or an old firmware, you can flash new "knoxed" firmware.
note that Triangle away and other stuffs to reset counter or status, wont work on new firmware.
Click to expand...
Click to collapse
So, when I go into 'proper' download mode (pressing Vol. Down + Home + power) I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
And for the 'Firmware upgrade encountered an issue...' screen, I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
Hope this helps
jesus1987 said:
So, when I go into 'proper' download mode (pressing Vol. Down + Home + power) I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
And for the 'Firmware upgrade encountered an issue...' screen, I have:
ODIN MODE
PRODUCT NAME:GT-I9505
CURRENT BINARY:Samsung Official
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID:0x1(or t?)
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION:Enable
Hope this helps
Click to expand...
Click to collapse
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
samersh72 said:
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
Click to expand...
Click to collapse
At the moment I'm downloading "I9505XXUDMI1-PRE-ROOTED-ODEX-FULL.rar", will this work do you think when I try and flash using ODIN? Hope so!!!
Right, I've tried that firmware, and it's still failing on odin any ideas?
samersh72 said:
it seems you have the secured bootloder, dont use triangle away or somthing else to reset counter and status.
you can flash firmware that begin only with I9505XXUD or I9505XXUE
Click to expand...
Click to collapse
Seems this one doesn't work either...
I've noticed something weird though, I've tried running it a few times, and each time it seems to get a little further in the flash process (it gets to just past modem) then fails.
Hello,
what USB cable are you using?
I have encountered an issue with the original Samsung cable, ("fail" in Odin all the time), but when I switched to another usb cable everything worked from that moment on
Try it, you might have luck.
Zeitraffer said:
Hello,
what USB cable are you using?
I have encountered an issue with the original Samsung cable, ("fail" in Odin all the time), but when I switched to another usb cable everything worked from that moment on
Try it, you might have luck.
Click to expand...
Click to collapse
Funny you should say that...
I restarted my PC, and tried a few USB ports, and cables, and it was still failing. But I stuck at it, and literally doing the same procedure over and over seems to have worked, as it randomly decided to flash fine! This was using the XXUE firmware
Do you still have KNOX WARRANTY 0X1 in download mode?
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Do you still have KNOX WARRANTY 0X1 in download mode?
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah, it still says KNOX WARRANTY VOID 0x1 but it also says the binary and system status are official. Is there a way to unvoid?
Hi, I just have a quick question, I have the European Unlocked i9505 which is now rooted and has Philz recovery installed, apart from that it is stock (never had cutom rom installed). I want to put it back to 100% stock, so I was going to use triangle away first of all to reset the knox counter, before un-rooting.
My question is once I have reset the counter, when using Kies to update the phone, do I have to un-root and install stock recovery prior to doing an update through Kies or will the Kies update and reset everything automatically, i.e. will it install stock recovery and remove Root on its own..?
Kies is already saying there is an update ready for the phone, but I don't want to anything until I've checked first..?
Cheers for any advice
Check for your Knox counter in download mode. If it is tripped then you wont get OTA or Kies updates.If u want to get on full stock with stock recovery then u ll hav to flash official firmware from samfirmware through Odin. And last upto my knowledge Triangle away wont reset your Knox counter.
Sent from my OCTA CORE I9500
Mandark52 said:
Check for your Knox counter in download mode. If it is tripped then you wont get OTA or Kies updates.If u want to get on full stock with stock recovery then u ll hav to flash official firmware from samfirmware through Odin. And last upto my knowledge Triangle away wont reset your Knox counter.
Sent from my OCTA CORE I9500
Click to expand...
Click to collapse
Hi,
I'm confused then, because Kies says that there is an update when the phone is connected via usb..?
In download mode the phone says:
Product Name: i9505
Current Binary: Custom
System Status: Custom
Knox Kernal Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enable
eMMC Burst Mode: Enabled
And Triangle Away reports 'Current Status' as:
Counter: 5
Binary: Custom
Device: GT-i9505
System: Modified
So, surely Keis shouldn't offer an update because KNOX Void Warranty 0×1 and System is Modified or am I missing something..??
Your missing something...
theunderling said:
Your missing something...
Click to expand...
Click to collapse
And that is..?
Main Mic Not Working
I'm having a problem with my i9505.
I think my main mic is not working anymore because people can't hear me on regular call but when I switch it to speaker mode the second mic works fine.
I've flashed and reset my phone. And changed the microphone unit including charging port and nothing changed.
what do you suggest me to do?
have you faced such problem with S4?
It is incorrect to say that you won't get an ota with Knox tripped because I had one last week.
Use TA to reset counter then use Odin to flash the latest Stock Rom as identified by Sammoblie. You'll then be official status and the next ota will come automatically
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It is incorrect to say that you won't get an ota with Knox tripped because I had one last week.
Use TA to reset counter then use Odin to flash the latest Stock Rom as identified by Sammoblie. You'll then be official status and the next ota will come automatically
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
If u are on custom recovery you wont get OTA/ kies updates. This is what I ve read.
topcat888 said:
Hi, I just have a quick question, I have the European Unlocked i9505 which is now rooted and has Philz recovery installed, apart from that it is stock (never had cutom rom installed). I want to put it back to 100% stock, so I was going to use triangle away first of all to reset the knox counter, before un-rooting.
My question is once I have reset the counter, when using Kies to update the phone, do I have to un-root and install stock recovery prior to doing an update through Kies or will the Kies update and reset everything automatically, i.e. will it install stock recovery and remove Root on its own..?
Kies is already saying there is an update ready for the phone, but I don't want to anything until I've checked first..?
Cheers for any advice
Click to expand...
Click to collapse
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur flash counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Joku1981 said:
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Click to expand...
Click to collapse
This is also an accurate way to upate your phone.
However, I have just reread the OP and you are talking about resetting the Knox Counter. This is not possible at present
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
This is also an accurate way to upate your phone.
However, I have just reread the OP and you are talking about resetting the Knox Counter. This is not possible at present
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Confused, TA supports and will reset the i9505..?
topcat888 said:
Confused, TA supports and will reset the i9505..?
Click to expand...
Click to collapse
It will reset the flash counter but not the Knox counter
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It will reset the flash counter but not the Knox counter
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Ah I see, and it's the flash counter that lets you or stops you downloading OTA updates..?
topcat888 said:
Ah I see, and it's the flash counter that lets you or stops you downloading OTA updates..?
Click to expand...
Click to collapse
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
And it's the modified status will be reset with Triangle Away..?
Painman1963 said:
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
custom recovery will stop Ota updates.
Sent from my OCTA CORE I9500
Mandark52 said:
custom recovery will stop Ota updates.
Sent from my OCTA CORE I9500
Click to expand...
Click to collapse
That's what I said. Along with custom recovery
Sent from my GT-I9505 using Tapatalk
Joku1981 said:
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur flash counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Click to expand...
Click to collapse
Sorry to keep asking questions, I have done Triangle Away now and the counter is 0 and it is official...
So, do I now have to do a 'Full Unroot' using SuperSU before using Kies to update..?
Or is that step not required, shall I just let Keis do its thing and the update will wipe everything including Root and recovery..??
Or is it better to use Odin to flash the I9505XXUEMKF firmware I have downloaded already..?
Basically, I just want the easiest way to get back to stock...
Thanks again
topcat888 said:
Sorry to keep asking questions, I have done Triangle Away now and the counter is 0 and it is official...
So, do I now have to do a 'Full Unroot' using SuperSU before using Kies to update..?
Or is that step not required, shall I just let Keis do its thing and the update will wipe everything including Root and recovery..??
Or is it better to use Odin to flash the I9505XXUEMKF firmware I have downloaded already..?
Basically, I just want the easiest way to get back to stock...
Thanks again
Click to expand...
Click to collapse
Flash through Odin directly no need to unroot. As you are flashing stock it will automatically clear the root. Just follow the correct steps for flashing. All the best.
Mandark52 said:
Flash through Odin directly no need to unroot. As you are flashing stock it will automatically clear the root. Just follow the correct steps for flashing. All the best.
Click to expand...
Click to collapse
All done, flashed back to stock BUT one thing I don't understand is that under Settings/More/About Device/Status it states
that the Device Status is still Custom not Official, why would that be.?? because of Knox Warranty Void being 0x1..??
Hi, i have note 3 sm n9005 or something and rooted my phone for some stupid reason, its still on stock the only thing that i think happened was i have supersu, i paniced and factory reset, now supersu has a error thing with something to do with binary settings or something. All i want to do it fully reset my phone, if its any help im british with EE... does flashing supersu trip knox counter? Am i actually rooted for if i were to flash stock? Will that trip it? Iv knly had phone few months and im scared... if i flash stock can i then update legally coz i cant update because the device is modified? I used odin... can someone help please, i know nothing and yes, i should look into what im doing more before hand. Can you explain everything and what to do please? Every little thing, please and without tripping knox and as if it was out the box new. Please
Firstly, flashing SuperSU trips KNOX. In the first place, to install SuperSU you need a custom recovery which would ALSO trip KNOX. Flashing back to stock unroots your phone too.
If you are convinced that you have not tripped KNOX, just re flash your phone back to stock with ODIN.
This_Guyse said:
Firstly, flashing SuperSU trips KNOX. In the first place, to install SuperSU you need a custom recovery which would ALSO trip KNOX. Flashing back to stock unroots your phone too.
If you are convinced that you have not tripped KNOX, just re flash your phone back to stock with ODIN.
Click to expand...
Click to collapse
I dont have a clue what i first did but what i did magically apeared with supersu. Can i flash stock which will get rid of supersu and can i reset my knox counter? And am i actually rooted seen as i factory reset?
MarkDyer1 said:
I dont have a clue what i first did but what i did magically apeared with supersu. Can i flash stock which will get rid of supersu and can i reset my knox counter? And am i actually rooted seen as i factory reset?
Click to expand...
Click to collapse
Flashing stock will get rid of SuperSU and root but you cannot reset KNOX. It is permanently 0x1 and will always be.
This_Guyse said:
Flashing stock will get rid of SuperSU and root but you cannot reset KNOX. It is permanently 0x1 and will always be.
Click to expand...
Click to collapse
What about the fact i factory reset? Is it still rooted to flash stock? And doesnt it have to be a unrooted stocked rather than flashing rooted stock? And where do i got stock and do i need to unzip files and stuff?
MarkDyer1 said:
Hi, i have note 3 sm n9005 or something and rooted my phone for some stupid reason, its still on stock the only thing that i think happened was i have supersu, i paniced and factory reset, now supersu has a error thing with something to do with binary settings or something. All i want to do it fully reset my phone, if its any help im british with EE... does flashing supersu trip knox counter? Am i actually rooted for if i were to flash stock? Will that trip it? Iv knly had phone few months and im scared... if i flash stock can i then update legally coz i cant update because the device is modified? I used odin... can someone help please, i know nothing and yes, i should look into what im doing more before hand. Can you explain everything and what to do please? Every little thing, please and without tripping knox and as if it was out the box new. Please
Click to expand...
Click to collapse
Reboot in download mode I. E. Volume down+home+power, check the knox counter if it's 0x1 then it has already been tripped and you have been set free ?? and if it's 0x0 you are still locked in a cage.
Report back with what you see.
saadramiz said:
Reboot in download mode I. E. Volume down+home+power, check the knox counter if it's 0x1 then it has already been tripped and you have been set free ?? and if it's 0x0 you are still locked in a cage.
Report back with what you see.
Click to expand...
Click to collapse
I know i have done something coz when i want to update it says this device has been modified. But i havent flashed any roms so surely knox should be 0x0 and flashing stock keeps it 0x0 doesnt it?
MarkDyer1 said:
I know i have done something coz when i want to update it says this device has been modified. But i havent flashed any roms so surely knox should be 0x0 and flashing stock keeps it 0x0 doesnt it?
Click to expand...
Click to collapse
Yes, if your Knox is still 0x0, flashing stock keeps it 0x0.
Use Phone INFO ★Samsung★ app to check for the Knox Warranty Void status (in the GENERAL INFO section).
Hello folks,
today I flashed official Lollipop 5.0.1 via ODIN on my N910-F and accidently tripped my KNOX Counter. So be careful if you do not want to void your warranty.
My phone is carrier branded DTM (T-Mobile) and had latest OTA firmware 4.4.4 *ANK4 on it. Back when i did buy my device I decided to debrand my phone as soon as Lollipop comes out.
So I did and flashed in one step from KitKat (T-Mobile) to Lollipop (Open). From what I read a assumed it would be no problem because it's a newer build but in some way it tripped my Knox Counter to 0x1 (3).
I did use Odin 3.09 as suggested by sammobile but ended up with an error (Fail) at the end of the flashing procedure. I downloaded Odin 3.10 and reflashed without any problems. This might be also considered as a reason for tripping the counter (as it says 3). I checked my counter after 2 factory resets afterwards.
Now I'm actually good to root I guess. Be careful.
EDIT: When I'm performing a factory reset from within the ROM it fails with "dm-verity verification failed..." message and takes me to the Android system recovery. From there I can do the factory reset. I think there is something gone wrong. Ideas on that message?
raupe1337 said:
Hello folks,
today I flashed official Lollipop 5.0.1 via ODIN in my N910-F and accidently tripped my KNOX Counter. So be careful if you do not want to void your warranty.
My phone is carrier branded DTM (T-Mobile) and had latest OTA firmware 4.4.4 *ANK4 on it. Back when i did buy my device I decided to debrand my phone as soon as Lollipop comes out.
So I did and flashed in one step from KitKat (T-Mobile) to Lollipop (Open). From what I read a assumed it would be no problem because it's a newer build but in some way it tripped my Knox Counter to 0x1 (3).
I did use Odin 3.09 as suggested by sammobile but ended up with an error (Fail) at the end of the flashing procedure. I downloaded Odin 3.10 and reflashed without any problems. This might be also considered as a reason for tripping the counter (as it says 3). I checked my counter after 2 factory resets afterwards.
Now I'm actually good to root I guess. Be careful.
Click to expand...
Click to collapse
I never heard of this? You tripped Knox with the official firmware? Did you maybe have the wrong options selected in Odin, as you would be the first who is able to trip Knox with official firmware???
I don't know why it tripped it. I haven't tripped it even after using Z3X box.
Everytime I use a firmware from sammobile it never tripped any counter of my phones.
marleyb said:
Did you maybe have the wrong options selected in Odin, as you would be the first who is able to trip Knox with official firmware???
Click to expand...
Click to collapse
Had standard options selected which are "Auto Reboot" and "F. Reset Time".
I might think the trip is not caused by flashing but performing a factory reset afterwards which results in "dm-verity verification failed..." message in the recovery menu. From what I know this error is caused by root which I didn't.
Update: Device is now working as supposed. After two failed attempts to flash the firmware via Kies new it worked on a third time. No error on factory reset.
My assumption is that there went something horribly wrong on first time flashing the firmware via ODIN, which preventet the factory reset from performing as usual. Knox detected that inexplicable status and graded it as modified which tripped the Knox counter then. I have no other explanation for this, maybe the 0.01% got real in my case.
So, a long time ago I towelrooted my gs5 on 4.4.2 and just left it like that (no custom rom , kernel, or bootloader). I recently upgraded to an N6 and would like to sell the old phone now. I'm trying to return to stock, but my craptop died and I'm not able to Odin a stock .tar file. I've already used 'full unroot' in SU, but I'm still showing 'Custom' status. I can't OTA and I can't find a stock rom to flash from the factory recovery, so are there any other options I'm missing?
Thanks in advance!
Just factory reset it from stock recovery
*Detection* said:
Just factory reset it from stock recovery
Click to expand...
Click to collapse
Thanks for the reply. I actually tried factory resetting through the settings menu and the stock recovery. Both leave me with a 'custom' status and unable to OTA.
I'd suggest using ODIN to flash a stock ROM from sammobile dot com, but with it being Verizon, it's likely got a locked bootloader, and I'm not sure if you can flash anything with ODIN when the bootloader is locked, worth a try though, it'll just fail with an AUTH! if it doesn't work
Instructions are under the download on their site
if u rooted and trip your knox into 0*1 your are nvr getting OTA updates for my knowledge
vinura kithmal said:
if u rooted and trip your knox into 0*1 your are nvr getting OTA updates for my knowledge
Click to expand...
Click to collapse
Wrong, I tripped KNOX ages ago and can still receive OTA updates fine if I'm on 100% stock
*Detection* said:
Wrong, I tripped KNOX ages ago and can still receive OTA updates fine if I'm on 100% stock
Click to expand...
Click to collapse
i did not get any
thts why
sorry