Hi Guys!
I have a problem with my phone, the simcard is not working it won't detect any simcard. I also tried to flash my phone using the power button + volume down but its also not working, the phone will just open and when I tried to reset my phone on settings with the back up & reset, the phone will just restart like nothing happened. Any ideas on how to fix this? I watched a lot of tutorials on youtube but it didn't worked on my phone. Please help ?
Related
Ok so my hd mini decided to throw a spaz and freeze so I had to whip out the battery and restart, upon restarting it would load up the white HTC screen and then just go to a black screen and freeze on it, eventually after numerous hard resets and it freezing on the orange windows loading/setup screen it finally worked and everything was restored to factory settings.
Now two weeks later the same thing has happened only now the phone wont let me perform a hard reset, it comes up with this and a red, green, blue and white screen:
PB92100
SPL-1.31.0000
!microP(LED) error(0x00)! expected(0x1B)
I have no idea where to go from here to try and fix, thought about maybe flasing a new rom but the computer wont detect the phone through the usb cable...
Anyone have any ideas or suggestions, please?
now you are in bootloader screen (tricolour screen) so you can flash ONLY stock rom for your device ,folow the steps in my post here : http://forum.xda-developers.com/showthread.php?t=997285 .Feel free to ask me anything
Awesome, thanks for that ledavi will try it as soon as I get home from work.
Same problem
I also have the same problem.. But i cant access the phone in bootloader menu..
only the error code described above is showing.
Tried several times with dft_sspl and custom roms
And htcs own latest stock.
Only getting errorcode 260 No connection..
Havent found anything about this anywhere on the net.. Maybe i suck at searching
but i have been looking for a couple of hours now..
Anyone have any ideas of what i can try??
Regards Krister
Microp(LED) Error
My htc HD mini has the same problem. Shows "MicroP(LED) error (0x00)! Expected (0x1B)" in bootloader mode and wont let your flash or boot normally. Removing the battery for a while seems to be helping to boot it normally without the error. Once its up, its working perfectly until it freezes again. Any suggestions/solution to this problem ?
Hi there
I had the opportunity to fix this led error message by chance. After hours of trials, entering to the bootloader with volume down + power, my HD mini has never been recognized through USB connection.
For an unknown (magical?) reason, i plugged the phone to the usb port WHILE PUSHING VOLUME DOWN BUTTON, and the message disappeared, and the phone was finally recognized. I don't know if it's a matter of chance, but it's worth to try!!
Good luck, hope it will work
Hello All,
Today, I got t-mobile locked leo (UK). It was continuously stucking and restarting. I thought, I can upgrade it to fix any firmware problems. However, it got stuck at 10% twice and filed.
Now, nothing showing up except big vibration sound.
Can some one guide me to fix this problem....
Yes put the HD2 into bootloader and flash the ROM. To put it into bootloader hold the volume down button down while powering on the HD2. Then connect the USB cable to the HD2 and computer and wait until you see the Serial change to USB in the white bar of bootloader and then run the RUU.
If you still can not get it to flash via USB then try flashing it via SD card.
Thank you for quick reply. However, even I am unable to go into bootloader.
As soon as I place battery, it just continesoly gives just vibration sound nothing happens. Even I tried Vol+up and vol + down and poweron, but doesn't help as nothing coming up on the screen.
I was updating official ROM : RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
nchary05 said:
Thank you for quick reply. However, even I am unable to go into bootloader.
As soon as I place battery, it just continesoly gives just vibration sound nothing happens. Even I tried Vol+up and vol + down and poweron, but doesn't help as nothing coming up on the screen.
Click to expand...
Click to collapse
Sorry if you can not get the HD2 to the bootloader then I hate to tell you but you have a bricked HD2. The only way to fix it is to use or get someone to use a JTAG and a RiffBox on your HD2 which requires the total removal of the main board from the HD2 and then putting it back in after you have fixed it using the JTAG and RiffBox.
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.
Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.
manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced
then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello
have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.
Hi XDA Developers,
I am facing a new problem in my LG L5 E615,it is showing Process.acore.apps. is stopped working and i try to reset the phone from Settings> Backup and Reset> Factory Reset, but am not seeing any reset. And i tired Hard Reset also by using Volume - + power key and Home screen and it is showing some andriod log is loading and then it is skipping to restart. And main problem is am not getting any calls or messages and also not able to install new applications.Please help in resolving this Issue.
With Regards,
Thejesh
navithejesh said:
Hi XDA Developers,
I am facing a new problem in my LG L5 E615,it is showing Process.acore.apps. is stopped working and i try to reset the phone from Settings> Backup and Reset> Factory Reset, but am not seeing any reset. And i tired Hard Reset also by using Volume - + power key and Home screen and it is showing some andriod log is loading and then it is skipping to restart. And main problem is am not getting any calls or messages and also not able to install new applications.Please help in resolving this Issue.
With Regards,
Thejesh
Click to expand...
Click to collapse
Hi
What ROM did you use ? Because you might be using a KitKat ROM (or 4.2.2 or 4.3.1, doesn't matter) and you use v10 baseband.
Hi guys, my phone is a LG L7 p705g unlocked, since 2 weeks from now it was working really weird, having lag, performance issues and even random reboots, i didnt care that much because i was using it to call and check whatsapp, after 2 days my whatsapp stopped working and asked me to reinstall it and so i did. I went to the play store, downloaded the app again and it kept saying "Whatsapp has a problem and it needs to be installed again". I tried to download it via .apk and it didn't work either, via whatsapp.com directly through the .apk and then using a file explorer and it didn't work either.
After a while i started to get frustrated and tried to do a hard reset, but guess what, it didn't work, i went through settings->security-> factory data reset, but it didn't work, it was just rebooting and that was it. Therefore i tried via hardware vol- , power and then menu. But it wasnt working either, it was just rebooting as well. My phone had the original KDZ that came from the factory and did a factory reset once, and it worked great that time.
Then i tried to reinstall the software but i couldn't find one that was for my country (venezuela movistar) and i used another one (from here: lg-phone -firmware. com/index.php?id_mod=13 and used the one "39 TFR/TELEFONICA(ECUADOR) V10B LGP705G" because it was the same "v10b" that my phone said so and using KDZ i flashed that firmware, it worked great, it worked for around 15mins or so, but i couldnt install whatsapp, kept saying the same error as before, and then 5mins later, it didn't turn on any more, and it isn't working. Somebody told me that it's a hard brick and it's unfixable, is it true?
PS: I can connect the phone to the PC and it says "FOUND NEW HARDWARE" but it won't turn on, i've tried the same to connect it with emergency mode (vol + vol - and power and then plug) but it isnt working. And my home button is broken, it has like 6 months not working so.. i cant use it in case you need some buttons sequence to be done.
Any idea what could be going wrong and if it's possible to fix it?
Sorry about my really long post and my awful english,