Database Users

Magisk 8,SuperUser r277,SuperSu 2.78 SR1,xposed 86.6(magisk),xposed 86.2 (SuperSu)

Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.

Reserved (why not?)

nice that was fast!

With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty

quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.

ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?

Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?

hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.

quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...

what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?

geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!

boss, Now how to pokemon go + root Passed SafetyNet?

chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail

ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^

And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?

jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)

All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).

agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk

Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..

[GUIDE] [F3111] HOW TO Install Magisk on Xperia XA

Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.

is this for single or dual sim XA??

caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra

rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?

BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well

BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed

BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.

Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)

Android Pay
does this let you use android pay

jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.

Thank you very much for this guide.

Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager

I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....

Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?

Where can I find the Systemless SuperSU?

I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?

Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.

rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet

Viper4Android for Moto G5 Plus

I tried installing the viper4Android on moto G5 Plus India variant and installed the driver.
I have already installed busybox and rooted with su.
But the viper4Android is not processing the audio when played through poweramp player. Also I have made the required audio settings in poweramp.
Any help in this regard is appreciated.

Which su you flashed?
22sumit said:
I tried installing the viper4Android on moto G5 Plus India variant and installed the driver.
I have already installed busybox and rooted with su.
But the viper4Android is not processing the audio when played through poweramp player. Also I have made the required audio settings in poweramp.
Any help in this regard is appreciated.
Click to expand...
Click to collapse

pankajgavri said:
Which su you flashed?
Click to expand...
Click to collapse
Chainfire SU 2.79.
Got v4A working but need to manually restart it each time I plug in earphone.

22sumit said:
Chainfire SU 2.79.
Got v4A working but need to manually restart it each time I plug in earphone.
Click to expand...
Click to collapse
I got it to work with Magisk v11.6 using this zip - Arise Magisk Compatibility Module v2.2 LS
cant seem to find the source thread though.
No need to restart everytime.

deepakdtg said:
I got it to work with Magisk v11.6 using this zip - Arise Magisk Compatibility Module v2.2 LS
cant seem to find the source thread though.
No need to restart everytime.
Click to expand...
Click to collapse
Did you ever get it working better with superSU? I couldn't get it to work at all.

roygbiv859 said:
Did you ever get it working better with superSU? I couldn't get it to work at all.
Click to expand...
Click to collapse
Well, I flashed superSU after uninstalling magisk, the V4A app that I flashed earlier still worked fine. So, I didn't bother to check if it worked on a clean install.

same problem at me. i've tried any version of v4a but nothing work. Suggestions?

I have same problem with SuperSU 2.79. always have to exit viper then restart to begin processing. Makes no difference with which Music player i use it always stops processing. Didnt have this problem on aexop ROM though. I also tried using magisk but had same result with failure to keep processing enabled.

Ramrod71 said:
I have same problem with SuperSU 2.79. always have to exit viper then restart to begin processing. Makes no difference with which Music player i use it always stops processing. Didnt have this problem on aexop ROM though. I also tried using magisk but had same result with failure to keep processing enabled.
Click to expand...
Click to collapse
Did you installed viper4android magisk module? I also noticed that on some roms audio modification magisk module causes problems with viper.

washoq said:
Did you installed viper4android magisk module? I also noticed that on some roms audio modification magisk module causes problems with viper.
Click to expand...
Click to collapse
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?

Marco2701 said:
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?
Click to expand...
Click to collapse
I don't know, maybe. I am using Magisk v13 + Busybox by osm0sis (magisk module) + Viper4Android FX (magisk module) + Viper4Android v2.5.0.5 (flashable zip).
I also have FX Compatible Mode set to Compatible in Viper settings and Music FX disabled. My current ROM is Pure Nexus.

The Arise Sound System zip flash install works much better:
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
But they leave out the critical step of modifying the arise_customize.prop file and placing it in internal storage
BEFORE you flash (SMH).
http://www.droidviews.com/install-arise-magnum-opus-sound-mod-android/
...but I'm having the same issue - no processing, then it works, then not.
MediaMonkey Pro is my music player, and I really don't want to use another one.
Grrr...
-G

Have you tried using a different music app like the Google one. Always found it a struggle with power amp.

Most of the magisk modules will fail on the moto g5 plus. You need to flash a custom kernel in order for the modules to work, including magisk hide.

Marco2701 said:
i've tried whit magisk. Magisk doesn't work and then i have used classic method. Is this the problem?
Click to expand...
Click to collapse
I'm on RR nougat final. Can you give me a working process to install viper4android on my Moto G5 plus which has presently TWRP+Magisk 16.0.

Yeshu_bablu said:
I'm on RR nougat final. Can you give me a working process to install viper4android on my Moto G5 plus which has presently TWRP+Magisk 16.0.
Click to expand...
Click to collapse
Disregard the posts from a long time ago and install this (see screenshot) from the Downloads section of Magisk (for me it appears in Modules because it's installed), it's very easy and works perfectly.

Dahenjo said:
Disregard the posts from a long time ago and install this (see screenshot) from the Downloads section of Magisk (for me it appears in Modules because it's installed), it's very easy and works perfectly.
Click to expand...
Click to collapse
Thank you for the reply. It seems Viper is not working properly even if I did it in your method. Should I uninstall audio fx?

Yeshu_bablu said:
Thank you for the reply. It seems Viper is not working properly even if I did it in your method. Should I uninstall audio fx?
Click to expand...
Click to collapse
Yes, you must have something conflicting, possibly from already trying other versions but hard to tell what. I've been using either that or the one by ShadySquirrel (also in Magisk/Downloads) for several months on dozens of installs of the popular nougat & oreo ROMs with zero issues.
Try a fresh install after full wipe (dalvik/system/data/cache) - install only ROM + gapps (no custom kernels until after Viper is working) - boot once to system/desktop to make sure all is ok but don't install anything yet from playstore/SD/etc - install Magisk in TWRP, reboot system - open Magisk, do any requested updates, check safetynet fully passes (if not install safetynet fix or will get errors trying to install from Downloads) - find Viper in Downloads, choose to install (not download), when finished choose reboot - open/configure Viper, check on something very basic like default music player, should be working - keep checking as you install apps/kernels/etc so that in case something conflicts you'll know what.

Working ViperFX with Stock Nougat & Magisk?

Does anyone have Viper Fx working since taking the OTA? I have the module installed from the Magisk repo, but cannot get it to process. Any wisdom would be appreciated.
XT1575
Magisk 14.2
ViperFx repo mod 2.5.0.4
Busybox

Try This . It's work for me on CrDroid 3.7. Maybe on stock nougat will work too.

Irieone said:
Does anyone have Viper Fx working since taking the OTA? I have the module installed from the Magisk repo, but cannot get it to process. Any wisdom would be appreciated.
XT1575
Magisk 14.2
ViperFx repo mod 2.5.0.4
Busybox
Click to expand...
Click to collapse
Probably you need deep buffer remover. Try from post #39.
https://forum.xda-developers.com/ap...modules-v2-t3575758/post71597704#post71597704

srhristoff said:
Try This . It's work for me on CrDroid 3.7. Maybe on stock nougat will work too.
Click to expand...
Click to collapse
Didn't work, but thanks for trying to help.
dzidexx said:
Probably you need deep buffer remover. Try from post #39.
https://forum.xda-developers.com/ap...modules-v2-t3575758/post71597704#post71597704
Click to expand...
Click to collapse
I tried and failed to get this installed previously with Magisk 14.2. I get an install error.
I am going to go back to SuperSU and flash the Viper zip file through recovery.

Did you uninstall previus v4a?
Uninstall, reboot and:
Use v4a+udbr from this post.
...but I haven't stock. @Irieone

dzidexx said:
Did you uninstall previus v4a?
Uninstall, reboot and:
Use v4a+udbr from this post.
...but I haven't stock. @Irieone
Click to expand...
Click to collapse
Yes to all of the above. Can't get it working with SuperSU either. There are a few hacks that involve deleting one or both of the audio_effects file too that failed. Tried disabling default Android Effect system app. SELinux set to permissive and busybox installed. Getting the drivers installed is not a problem. Processing is a no go. I have the same issue with my Xperia Z4 tablet. Its maddening.

I don't remember, but if I was using v4a on stock 6.x, it was 2.4, no adds:
https://androidfilehost.com/?w=files&flid=118862
Supersu, Busybox with installed symlinks. @Irieone

I was using A.R.I.S.E Magnum Opus on my Stock Nougat withouth issues. No magisk module required. Give it a try.
https://forum.xda-developers.com/an...d-systems-auditory-research-t3379709/page2566

Dovahkiin1290 said:
I was using A.R.I.S.E Magnum Opus on my Stock Nougat withouth issues. No magisk module required. Give it a try.
https://forum.xda-developers.com/an...d-systems-auditory-research-t3379709/page2566
Click to expand...
Click to collapse
This worked when coupled with Magisk, busybox mod, audio modification library mod, and universal deep buffer remover mod. You made my day. Thank you. :good:

Viper4Android

Does anyone know if Viper4Android magisk module is working for the OnePlus 8 Pro? It hasn't been updated since 2019 and I was wanting to install it without having to install a custom kernel

dgunn said:
Does anyone know if Viper4Android magisk module is working for the OnePlus 8 Pro? It hasn't been updated since 2019 and I was wanting to install it without having to install a custom kernel
Click to expand...
Click to collapse
Can confirm it works. Install module and reboot. Open Viper4Android, install driver and reboot.
Working fine right after.

cas1991 said:
Can confirm it works. Install module and reboot. Open Viper4Android, install driver and reboot.
Working fine right after.
Click to expand...
Click to collapse
I have tried the magisk module and it is not working properly. It freezes up trying to install the driver and then it does not show that it is processing. Once I restart the device it tells me I need to install the driver again which freezes up and then does not work. I have installed it about five times now with no luck. It really really needs to be updated

dgunn said:
I have tried the magisk module and it is not working properly. It freezes up trying to install the driver and then it does not show that it is processing. Once I restart the device it tells me I need to install the driver again which freezes up and then does not work. I have installed it about five times now with no luck. It really really needs to be updated
Click to expand...
Click to collapse
This works

Works for me just make sure audio modification library is uninstalled and reboot, then install from magisk, reboot, install driver, reboot, profit!

Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....

PMad said:
Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....
Click to expand...
Click to collapse
Have you tried the above attached module?

PMad said:
Doesnt work for me, i have busybox, magiskhide props, miui 10 sounds, and systemless hosts installed. When i try to download viper, Magisk vanishes. If i download and try to add the module from a zip, Magisk crashes by just... vanishing....
Click to expand...
Click to collapse
Hi, on my previous device, I experienced this and, either upgraded the apk, or downgraded the apk by uninstalling (magisk apk), reinstalling older version, & reboot. You can find all the released apks on APKMirror. I'm personally using the EXOS magisk ROM, which has options for viper and Dolby Atmos(w/ EQ), with the module Audio Modification Library.

Just flash the 2.7.1.6 zip on magisk manager, reboot , open viper, install the drivers , reboot , done..

Samuel Holland said:
Hi, on my previous device, I experienced this and, either upgraded the apk, or downgraded the apk by uninstalling (magisk apk), reinstalling older version, & reboot. You can find all the released apks on APKMirror. I'm personally using the EXOS magisk ROM, which has options for viper and Dolby Atmos(w/ EQ), with the module Audio Modification Library.
Click to expand...
Click to collapse
Is yours working ok via the EXOS rom? I also have that installed but Viper won't process unless I have "Attach audio effects" toggled on in settings. On other phones, I've had to toggle this on and off right after and it would work, but with current setup, I have to leave it on for it to work. That may be causing problems with it not processing using youtube for me.

Do you have installed audio modification library?

Is viper4android working on the lastest OTA and magisk?

xXx no limits has this as an option and I can assure you it works.

It was working with ob1 but ob2 has been a no go. I've tried over and over but it ain't happening.

dladz said:
xXx no limits has this as an option and I can assure you it works.
Click to expand...
Click to collapse
I can confirm that it works.

Navyvet63 said:
It was working with ob1 but ob2 has been a no go. I've tried over and over but it ain't happening.
Click to expand...
Click to collapse
Working great on ob2 for me

I think I will try downgrading to ob1, install v4a then upgrade to ob2.

On ob2, magisk install fails for me once trying to download latest apk

pocholo36 said:
On ob2, magisk install fails for me once trying to download latest apk
Click to expand...
Click to collapse
APK?...why?
You need the viperfx for Android 11 zip. .
Just flash it on magisk...and is ready

cultofluna said:
APK?...why?
You need the viperfx for Android 11 zip. .
Just flash it on magisk...and is ready
Click to expand...
Click to collapse
I don't know, maybe something to do with my vpn ..
Is the Android 11 one the 2.7.1.6 zip in this thread?