Database Users

Nexus 7 stuck on fastboot screen/bootloop...bricked?

Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help

voodoochild2008 said:
Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
Click to expand...
Click to collapse
try to flash recovery again via fastboot...or doesnt pc recognize divice at all?
S.R

shivasrage said:
try to flash recovery again via fastboot...
S.R
Click to expand...
Click to collapse
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.

voodoochild2008 said:
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
Click to expand...
Click to collapse
f****
have you tried flashing factory image from google site.with flash all-sh?

shivasrage said:
f****
have you tried flashing factory image from google site.with flash all-sh?
Click to expand...
Click to collapse
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?

voodoochild2008 said:
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
Click to expand...
Click to collapse
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.

shivasrage said:
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
Click to expand...
Click to collapse
Thanks....but still get waiting for device, thats the problem, nothing seems to see it so I cannot flash anything to it.

You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.

You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
i thought the same as you but fastboot isn recognizig N7 anymore....always wating for device....

Hemidroids said:
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
Click to expand...
Click to collapse
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.

[/COLOR]
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/

voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
EXE? doh.......Windows.......sorry cant help.

shivasrage said:
[/COLOR]
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
Tried some of that already but will try again tomorrow.
Thanks for help with this and will post tomorrow if I can sort it. cheers

I hope this instructions can help you a little bit...but if it fails don´t be angry its all I can think of ...at this time ....merry christmas
S.R.

http://forum.xda-developers.com/showthread.php?p=31931117:D
Sent from my Nexus 7 using xda premium

Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED

voodoochild2008 said:
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
Click to expand...
Click to collapse
How did you get it to work? I have problem getting my device to be recognized. Stuck on boot loop too..

Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.

Quacker245 said:
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Click to expand...
Click to collapse
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )

brainvision said:
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
Click to expand...
Click to collapse
Hi sorry for not being clear. Basically I am only allowed to access the bootloader and my device is soft-bricked. I'm pretty sure I tried uninstalling and reinstalling the drivers about a year ago when I originally did it, but I'll try again and let you know. Thanks!

Qualcomm hs-usb qdloader 9008 nexus 6P (HELP!)

Hi there, I've been browsing through the threads related to unbricking of the Nexus 6P stuck in qualcomm hs-usb qdloader 9008 mode, really desperate to get my device working again if even possible however I've tried for about four days now different ways and files and I've had no luck.
My bootloader is locked and no ADB etc managed to get my device showing as the 9008 port so I think it's stuck in EDL.
Following guides, this is the furthest I've yet to get (In screenshot)
Could anyone shed some light and some assistance please? what am I doing wrong!?

attempted to apply for heat some to the device then re flash ?

blackcell1 said:
attempted to apply for heat to the device then re flash ?
Click to expand...
Click to collapse
Sorry, I don't quite understand what you mean?

Clarkeofcurtis said:
Sorry, I don't quite understand what you mean?
Click to expand...
Click to collapse
Use a hairdryer to warm up the back of the phone.

Are you pulling my leg? Warm it up then reflash?

nah im not trying to make you destroy your phone, being rather serious with this method. i use it on a daily basis to solve phones that fail during restoring factory images. i wouldn't know how long to give it with a hair dryer as i have access to a heat gun/heat mats .
just think of it as a cheap mans re balling method

blackcell1 said:
nah im not trying to make you destroy your phone, being rather serious with this method. i use it on a daily basis to solve phones that fail during restoring factory images. i wouldn't know how long to give it with a hair dryer as i have access to a heat gun/heat mats .
just think of it as a cheap mans re balling method
Click to expand...
Click to collapse
Sorry haha, I'm a noob with most of this android stuff bar rooting and flashing a few devices prior! I shall give it a go now and get back to you - thank you for the advice

Clarkeofcurtis said:
Sorry haha, I'm a noob with most of this android stuff bar rooting and flashing a few devices prior! I shall give it a go now and get back to you - thank you for the advice
Click to expand...
Click to collapse
good luck, id give it a good couple of minutes on the highest setting, just so its a little hot to the touch. and attempt the flashing of the files when its still hot/warm.

blackcell1 said:
good luck, id give it a good couple of minutes on the highest setting, just so its a little hot to the touch. and attempt the flashing of the files when its still hot/warm.
Click to expand...
Click to collapse
thank you so much that worked, it has said flash successful, first time I got a google logo but now nothing, what would be my next step please?

if the bootloader is unlocked then you can directly flash the firmware. but if its not google "nexus ota" and then on your phone jump into the recovery and check the firmware model number and download the same ota and adb sideload it.
im not 100% sure on the next step as I've never had a nexus 6p with a dead bootloader. but thats what id do.
---------- Post added at 04:50 PM ---------- Previous post was at 04:49 PM ----------
but from my personal experience with having to heat a phone up to restore factory images, it kinda means the phone is nearing the end of its life and id start thinking about buying your next phone before it sh*ts the bed.

blackcell1 said:
if the bootloader is unlocked then you can directly flash the firmware. but if its not google "nexus ota" and then on your phone jump into the recovery and check the firmware model number and download the same ota and adb sideload it.
im not 100% sure on the next step as I've never had a nexus 6p with a dead bootloader. but thats what id do.
Click to expand...
Click to collapse
Thank you for the reply and continuing to help, after seeing the google logo just once I'm getting nothing again - I'm even more determined now though as It's been dead for 2 months so this is the furthest I've gotten - the application of heat is what did it for me and fixed the error I was getting, can't get into recovery now though holding power + down etc

Clarkeofcurtis said:
Thank you for the reply and continuing to help, after seeing the google logo just once I'm getting nothing again - I'm even more determined now though as It's been dead for 2 months so this is the furthest I've gotten - the application of heat is what did it for me and fixed the error I was getting, can't get into recovery now though holding power + down etc
Click to expand...
Click to collapse
yeah can you access the bootloader at all ? does it say that the bootloader is locked ? from trying to restore LG's it sometimes has to be re heated a few times, but yeah if you need to re heat it to get further into the phone then its pretty much a lost cause. the only reason i do it is to remove the data so we can resell the device.

blackcell1 said:
yeah can you access the bootloader at all ? does it say that the bootloader is locked ? from trying to restore LG's it sometimes has to be re heated a few times, but yeah if you need to re heat it to get further into the phone then its pretty much a lost cause. the only reason i do it is to remove the data so we can resell the device.
Click to expand...
Click to collapse
I can get into the andriod screen where you can select recovery and such, with the BL, Baseband product variation and such, where should I go from here?
Oh right, so even once restored to firmware, will it be useless do you think if I can even manage to?

Clarkeofcurtis said:
I can get into the andriod screen where you can select recovery and such, with the BL, Baseband product variation and such, where should I go from here?
Oh right, so even once restored to firmware, will it be useless do you think if I can even manage to?
Click to expand...
Click to collapse
Sorry if you can't access the recovery from the bootloader and its in locked state then your a member of the lovely group of BLOD (bootloader of death) if you hit recovery does it show a little android logo and sit there?
Sorry for the late reply

blackcell1 said:
Sorry if you can't access the recovery from the bootloader and its in locked state then your a member of the lovely group of BLOD (bootloader of death) if you hit recovery does it show a little android logo and sit there?
Sorry for the late reply
Click to expand...
Click to collapse
I believe so, I can just about get into the bootloader at the best of times and when I do I can select options but once proceeding to start said mode phone freezes so can't get into recovery mode :/
Thank you for your continuous help, only way i can get it into bootloader is by heating it up so does that mean for the device to ever work It'll need heat every time? looking like a spares and repairs listing on ebay

Clarkeofcurtis said:
I believe so, I can just about get into the bootloader at the best of times and when I do I can select options but once proceeding to start said mode phone freezes so can't get into recovery mode :/
Thank you for your continuous help, only way i can get it into bootloader is by heating it up so does that mean for the device to ever work It'll need heat every time? looking like a spares and repairs listing on ebay
Click to expand...
Click to collapse
Hello....
How did you manage to get in to EDL mode..? I'm really curious. With stock bootloader? Since you can't access recovery
Also what is exactly displayed in Windows device manager?
You are using an outdated QFil version... It is from 2014 àr 2015.
Do a google search with: QPST_2.7.453.0 . This version seem to be from 2016.
Use the first link from the result. I analysed the files with virustotal, those seem clean or malware...
Also when plugging your usb cord to your PC, does your phone vibrate? Or does the LED blink in red?
You may have to press power button when plugging the usb cord or press power button for a certain amount of time before you plug the usb cord. I'm not completly sure, but your phone may not be in the "proper" EDL state to accept the QFil flash.
Good luck... :good:

Is it possible to send me the guide you used? Thanks.
Clarkeofcurtis said:
Hi there, I've been browsing through the threads related to unbricking of the Nexus 6P stuck in qualcomm hs-usb qdloader 9008 mode, really desperate to get my device working again if even possible however I've tried for about four days now different ways and files and I've had no luck.
My bootloader is locked and no ADB etc managed to get my device showing as the 9008 port so I think it's stuck in EDL.
Following guides, this is the furthest I've yet to get (In screenshot)
Could anyone shed some light and some assistance please? what am I doing wrong!?
Click to expand...
Click to collapse

Hey there sorry for slow replies, will be back on my desktop in an hour I'll send you links for what I followed and such, I think the only reason my device was in EDL mode was due to a hardware fault? As my device is faulty indefinitely as I had to use a hairdryer to warm it up while flashing this then allowed it to enter firehose state which a lot of people seem to error with - after all my attempts and research I'm to velieve there's a fault with the phone itself the only way I could get it to even power up was applying heat to it after removing the back panel
As blackcell said deballing or something? Worked a treat!
Furthest I've managed to get now is into my boot loader however everything is locked - when I press enter recovery my handset just freezes ?

5.1 said:
Hello....
How did you manage to get in to EDL mode..? I'm really curious. With stock bootloader? Since you can't access recovery
Also what is exactly displayed in Windows device manager?
You are using an outdated QFil version... It is from 2014 àr 2015.
Do a google search with: QPST_2.7.453.0 . This version seem to be from 2016.
Use the first link from the result. I analysed the files with virustotal, those seem clean or malware...
Also when plugging your usb cord to your PC, does your phone vibrate? Or does the LED blink in red?
You may have to press power button when plugging the usb cord or press power button for a certain amount of time before you plug the usb cord. I'm not completly sure, but your phone may not be in the "proper" EDL state to accept the QFil flash.
Good luck... :good:
Click to expand...
Click to collapse
Thanks pal if you check last post I wrote about my EDL mode forgot to tag you my apologies, as for my LED I've never seen that light up since I bricked it, even when google logo came up etc and while in the boot loader

Clarkeofcurtis said:
Thanks pal if you check last post I wrote about my EDL mode forgot to tag you my apologies, as for my LED I've never seen that light up since I bricked it, even when google logo came up etc and while in the boot loader
Click to expand...
Click to collapse
Light usually a red LED blink while in proper EDL state as far as I know. Could be something else on the N6P. Well, it looks like you are SOL. Sorry, I don't know what else to say, since you exhausted all possibilities...
Good luck...

Need help how to hard unbrick oneplus 5

Hi there, can somebody GUIDE How to unbrick ONEPLUS 5?
My OP5 is dead, black screen, just can be recognized to PC via qualcomm drivers, but i have searching some guide to do this, no found.
I think could be some easy do this, because there is a way for OP3T, via msm tool.
Thank you abot the support.

you have fast boot access and are you able to get into bootloader

#3
dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
hI there,
No, i cant full black screen!!!
i dont know if there is a way to have fasboot acces , full black screen,
let me tell you, when i conected the phone to pc, was recognized via qualcoom drivers
Thank you

How did you end up bricking it?

dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
mahoro.san said:
how did you end up bricking it?
Click to expand...
Click to collapse
hi, i did it trying to change a rom via twrp, when finished flashing gone black screen!!

Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache

Binary Assault said:
Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache
Click to expand...
Click to collapse
Hi !!! i did it!!! but .... bad news , nothing good!!!
...fastboot devices .... still dead
........adb devices .... still dead!!!!
black screen!!!

Any help with fully bricked device

Hello!
THink I have bricked my phone, but just checking before I go through what I suppose is a long process with oneplus.
Looking for any help. I had a working device - unlocked bootloader and installed TWRP and magisk using MauronofrioTool. ok - however, I found out I couldn't use a fingerprint security option on that would have been anoying. So... Long story short. I used MauronofrioTool to relock bootloader. Oops - so that didn't work. THen found out I couldn't do anything except stare at g.co/ADH message on my screen. Couldn
't get to fastboot or TWP. ANyway, so I managed to up and down volume and enter into TWRP. Was still connecting to the tool, so I downloaded factory Zips and tried to install via tool after unlocking - Seemed to be working ... but it stopped mid way through a process and hasbn't come back! NOthing at all. I wonder if I could have triggered an OEM thing? ANyway - literally nothing no buttons work no screen action. I see a QUSB_BULK_CID:etc number when connecting the phone, but that is it. No fast boot or any other actions available.
PLease, pretty devastating, Anyone know if I can do anything?

I'm no pro but I use this tool which helped me:

henk-jan said:
I'm no pro but I use this tool which helped me:
Click to expand...
Click to collapse
Thank you. I feel I am little past this stage now though.. Also trying the brick reprieve software . Just can't get my computer to recognise the phone now. No ability to get to emergency download path - think it is my crappy cihinese pc (old Huawei tablet basically) or Windows via apple that have me stranded.
**********SOLVED
THe crappy Chinese language Windows tablet worked as the unbrick OP said WIndows would. Must be a kink in the Windows via Mac that could get me into the situation, but not out.
Very relieved... Even though I still am not 100% sure what I actually ended up clicking to get it to register and connect with the unblock tool (which of course was in Chinese) hahaha.
Cheers
CHeers though

Glad you got it sorted out! Cheers

Need Help, please
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick

rickhurl said:
Just received my OnePlus 8 pro, decided to Root and unlock the bootloader---this went fine.
I then went and upgraded to Android 11 DP3.
I'm now only able to get into Fastboot. at points it will try to boot but only get to the logo screen and then goes black.
When the phone boots up, it goes to Qualcomm CrashDump Mode.
I've been attempting to solve this for half the day with no luck. I've tried Msmtool, but it doesn't recognize the device, even after loading drivers again.
Is there a way to load a ROM from fastboot mode?
Hoping someone can assist, this is super frustrating and I would appreciate any help, please.
Rick
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997

cultofluna said:
https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
Click to expand...
Click to collapse
Thanks so much. I ended up getting Msmtool to work. Although my device wasn't on (black screen) and it didn't fully show up in the tool, I decided to start the process anyway and it began to load.
I've been on here for over 10 yeas (XDA) I've just lost my account info and made a new one.
Thanks for taking the time to respond. Much appreciated.

Impossible to root tab a SM-T290?

I have read through no less than six different instructional threads I've probably watched 10 videos I've installed more software on my PC and my tablet that I know what to do with and I cannot get this tablet to root.
I'm not exaggerating when I say I probably have 20 hours into this project so far and just it will not work.
I am desperate for any help at all.

Does this mean anything to anybody?

This thing will NOT!! unlock the oem lock. I have toggled in developer options a hundred times restarted a hundred more times... USB debugging toggled off and on restart restart restart
WTF!!!!!!!!!!!

There is a command you have to run in fastboot after you toggle oem unlock, I'm guessing something similar to others, but I'm not very familiar yet as I just got this tablet

If you figure out the command, can you please let me know. I can't root this POS tablet.

it ended up fully bricked

scampo77 said:
This thing will NOT!! unlock the oem lock. I have toggled in developer options a hundred times restarted a hundred more times... USB debugging toggled off and on restart restart restart
WTF!!!!!!!!!!!
Click to expand...
Click to collapse
to unlock the OEM you unlock the developer option by clicking seven times on the build number, then you must connect the device to wifi, then OEM will appear if the bootloader is unlocked, for this: Turn off the device, hold volume + and volume - together and connect the usb. press volume + for a long period and then unlock the bootloader.

I had trouble with this too. The trick ended up being plugging in the USB cable while holding down the buttons.

I just payed OneClickRoot like $40 to root it for me and saved the chat and all the commands he ran in the CMD Prompt and i still have all the files he had me download if anyone needs them. I had Android 11 on mine.

Modifidious666 said:
I just payed OneClickRoot like $40 to root it for me and saved the chat and all the commands he ran in the CMD Prompt and i still have all the files he had me download if anyone needs them. I had Android 11 on mine.
Click to expand...
Click to collapse
Hey there. Do you still have them these commands?

PandoraEffect said:
Hey there. Do you still have them these commands?
Click to expand...
Click to collapse
SURE DO!!

I actually ran into a more unusual problem.
I have twrp flashes in Recovery and lineage in system. But I think I wiped the boot by accident. Because its only going to recovery. If anyone can tell me where I can find the boot.img or any other suggestions to fix the boot, I'd really appreciate it. Thanks.
(I did try to use Odin to flash BL and all but it is giving "SW Rev fail" and some binary error.)

If anyone wants the files I saved just let me know and I'll send a link to them saved in my Google Drive.

Thanks. I was able to flash stock firmware. If anyone needs help. You can message me.

https://drive.google.com/drive/folders/1NZPeRrqnPSgtC8dULNs0Q4LoK_XpPa2X is my link to all the files and saved CMD texts

scampo77 said:
it ended up fully bricked
Click to expand...
Click to collapse
You also needed to hold all the buttons at startup to boot into the real bootloader and then unlock it and then go into download mode. I have a SM-T290 fully rooted and working. You need some knowledge to have a good chance for it to work. Also root checker says i used the "hard" method.

Minionguyjpro said:
You also needed to hold all the buttons at startup to boot into the real bootloader and then unlock it and then go into download mode. I have a SM-T290 fully rooted and working. You need some knowledge to have a good chance for it to work. Also root checker says i used the "hard" method.
Click to expand...
Click to collapse
I just paid oneclickroot.com like $35 to do it so " I WOULDN'T" end up bricking it myself. Cause they gaurentee rooted or money back.

Modifidious666 said:
I just paid oneclickroot.com like $35 to do it so " I WOULDN'T" end up bricking it myself. Cause they gaurentee rooted or money back. And I'm about to have them do my NOW unlocked "once Cricket" LG K92 5G.
Click to expand...
Click to collapse

It depends on of you want to take the risk yourself. I did, and it actually ended up working well.

Minionguyjpro said:
You also needed to hold all the buttons at startup to boot into the real bootloader and then unlock it and then go into download mode. I have a SM-T290 fully rooted and working. You need some knowledge to have a good chance for it to work. Also root checker says i used the "hard" method.
Click to expand...
Click to collapse
Can you please teach me how you rooted ur tablet? I have it and its so hard