Need help how to hard unbrick oneplus 5 - OnePlus 5 Questions & Answers

Hi there, can somebody GUIDE How to unbrick ONEPLUS 5?
My OP5 is dead, black screen, just can be recognized to PC via qualcomm drivers, but i have searching some guide to do this, no found.
I think could be some easy do this, because there is a way for OP3T, via msm tool.
Thank you abot the support.

you have fast boot access and are you able to get into bootloader

#3
dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
hI there,
No, i cant full black screen!!!
i dont know if there is a way to have fasboot acces , full black screen,
let me tell you, when i conected the phone to pc, was recognized via qualcoom drivers
Thank you

How did you end up bricking it?

dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
mahoro.san said:
how did you end up bricking it?
Click to expand...
Click to collapse
hi, i did it trying to change a rom via twrp, when finished flashing gone black screen!!

Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache

Binary Assault said:
Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache
Click to expand...
Click to collapse
Hi !!! i did it!!! but .... bad news , nothing good!!!
...fastboot devices .... still dead
........adb devices .... still dead!!!!
black screen!!!

Related

Nexus 7 stuck on fastboot screen/bootloop...bricked?

Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
voodoochild2008 said:
Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
Click to expand...
Click to collapse
try to flash recovery again via fastboot...or doesnt pc recognize divice at all?
S.R
shivasrage said:
try to flash recovery again via fastboot...
S.R
Click to expand...
Click to collapse
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
voodoochild2008 said:
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
Click to expand...
Click to collapse
f****
have you tried flashing factory image from google site.with flash all-sh?
shivasrage said:
f****
have you tried flashing factory image from google site.with flash all-sh?
Click to expand...
Click to collapse
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
voodoochild2008 said:
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
Click to expand...
Click to collapse
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
shivasrage said:
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
Click to expand...
Click to collapse
Thanks....but still get waiting for device, thats the problem, nothing seems to see it so I cannot flash anything to it.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
i thought the same as you but fastboot isn recognizig N7 anymore....always wating for device....
Hemidroids said:
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
Click to expand...
Click to collapse
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
[/COLOR]
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
EXE? doh.......Windows.......sorry cant help.
shivasrage said:
[/COLOR]
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
Tried some of that already but will try again tomorrow.
Thanks for help with this and will post tomorrow if I can sort it. cheers
I hope this instructions can help you a little bit...but if it fails don´t be angry its all I can think of ...at this time ....merry christmas
S.R.
http://forum.xda-developers.com/showthread.php?p=31931117:D
Sent from my Nexus 7 using xda premium
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
voodoochild2008 said:
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
Click to expand...
Click to collapse
How did you get it to work? I have problem getting my device to be recognized. Stuck on boot loop too..
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Quacker245 said:
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Click to expand...
Click to collapse
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
brainvision said:
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
Click to expand...
Click to collapse
Hi sorry for not being clear. Basically I am only allowed to access the bootloader and my device is soft-bricked. I'm pretty sure I tried uninstalling and reinstalling the drivers about a year ago when I originally did it, but I'll try again and let you know. Thanks!

[Q] D802 Bricked, computer won't recognize it

Hi,
I recently updated to the official 4.4.2 kitkat update.I then proceeded to root the phone, and then stupidly, installed CWM. I rebooted, and was greeted with an endless LG Splash screen. Now, I tried a HEAP of ways to restore to stock, all of them returning the same problem, my computer won't pick up my phone. In download mode, nothing happens, nothing in device manager, and same when I'm stuck on the LG splash screen. When I go into CWM, it then recogizes my phone, but the methods of restoring to stock won't work with CWM running in the background. CWM also won't let me mount the usb...
The methods return the same error: Phone not detected, please plug the USB cable and retry.
Ubuntu won't recognize the phone in all three modes, and another computer does the same thing. (Both Windows 8)
Methods of stock restoration tried:
-KDZ
-LGMobile support tool
-Ubuntu (This: http://forum.xda-developers.com/showthread.php?t=2582142)
Can anyone help?
MintLord said:
Hi,
I recently updated to the official 4.4.2 kitkat update.I then proceeded to root the phone, and then stupidly, installed CWM. I rebooted, and was greeted with an endless LG Splash screen. Now, I tried a HEAP of ways to restore to stock, all of them returning the same problem, my computer won't pick up my phone. In download mode, nothing happens, nothing in device manager, and same when I'm stuck on the LG splash screen. When I go into CWM, it then recogizes my phone, but the methods of restoring to stock won't work with CWM running in the background. CWM also won't let me mount the usb...
The methods return the same error: Phone not detected, please plug the USB cable and retry.
Ubuntu won't recognize the phone in all three modes, and another computer does the same thing. (Both Windows 8)
Methods of stock restoration tried:
-KDZ
-LGMobile support tool
-Ubuntu (This: http://forum.xda-developers.com/showthread.php?t=2582142)
Can anyone help?
Click to expand...
Click to collapse
Have you tried adb sideload
raahult said:
Have you tried adb sideload
Click to expand...
Click to collapse
I don't know how to do that, And no, I don't think I have. Could you give me a guide on doing that?
MintLord said:
I don't know how to do that, And no, I don't think I have. Could you give me a guide on doing that?
Click to expand...
Click to collapse
Install http://forum.xda-developers.com/showthread.php?t=2588979
then go to recovery and try adb devices on command prompt on your PC to check if your device is listed
if it shows your devices then just search any thread that tell how to push flashable rom to your device.
raahult said:
Install http://forum.xda-developers.com/showthread.php?t=2588979
then go to recovery and try adb devices on command prompt on your PC to check if your device is listed
if it shows your devices then just search any thread that tell how to push flashable rom to your device.
Click to expand...
Click to collapse
No luck...
raahult said:
Install http://forum.xda-developers.com/showthread.php?t=2588979
then go to recovery and try adb devices on command prompt on your PC to check if your device is listed
if it shows your devices then just search any thread that tell how to push flashable rom to your device.
Click to expand...
Click to collapse
Wait, I got it working!
MintLord said:
Wait, I got it working!
Click to expand...
Click to collapse
Was your phone able to connect to the PC afterwards? I have a D800 that I am unable to get any PC to recognize. I need to restore it to stock but no matter what I do it does not show up in device manager (and I have a working rom on it).
crawlgsx said:
Was your phone able to connect to the PC afterwards? I have a D800 that I am unable to get any PC to recognize. I need to restore it to stock but no matter what I do it does not show up in device manager (and I have a working rom on it).
Click to expand...
Click to collapse
Yes, it does work now. I was able to restore to stock by adb pushing phillz recovery, and then flashing that, then adb pushing the stock ROM. Everything works as it should, now.
MintLord said:
Yes, it does work now. I was able to restore to stock by adb pushing phillz recovery, and then flashing that, then adb pushing the stock ROM. Everything works as it should, now.
Click to expand...
Click to collapse
Ah nice. Unfortunately I can't get device manager to see mine at all so I can't even ADB .
crawlgsx said:
Ah nice. Unfortunately I can't get device manager to see mine at all so I can't even ADB .
Click to expand...
Click to collapse
Does it recognize your phone when it's in the custom recovery? That was the only way I could do it on my phone.
Good luck!
I tried ADB devices nothing came out.
I have the same problem as listed in this thread. Tried everything to SHort circuit the chip. Basically everything.
I think the last thing i haven't try is dump it into the bin.
MintLord said:
Does it recognize your phone when it's in the custom recovery? That was the only way I could do it on my phone.
Good luck!
Click to expand...
Click to collapse
On TWRP it's detect my phone as "LGE Android MTP device" and i can't copy anything from my PC to my phone,
I can't ADB push too, it was error Read-only system
Any ideas?
Hi, sorry to post in this 1 year old post buy mt G2 is totally dead, I can sometimes get LG Logo and the main problem is i cannot get it into QHS-USB mode or anything.
Is there any key combinaison to do that ?

[Q] L01F no download mode, no usb reading.

Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 
unkn0wn68 said:
Hello. Please help me. I have a Japanese version of G2 (L-01F - DoCoMo) and i tried to flash an european version of kitkat because i couldn't update in OTA. Now the phone is bricked, it is bootlooping, the Download Mode doesn't work, it shows a few of blue dots and it stays there (the phone can't be recognized on PC using the USB cable). I can enter the Recovery Mode (the grey screen with LG logo) where the phone can be read by PC and using ADB tool is shown as "recovery". I can't use fastboot.exe because the device is not being recognized. What can i do? Thank you very much. 
Click to expand...
Click to collapse
Can someone help me please ?
unkn0wn68 said:
Can someone help me please ?
Click to expand...
Click to collapse
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
ronen1n said:
I have the same problem. Please tell me if you can fix it.
http://forum.xda-developers.com/lg-g2/help/device-conecting-to-pc-download-mode-t2996249
Click to expand...
Click to collapse
Actually i'm trying to repair it since October 2014. No-one knows the solution. I went to 3 different GSM Services and they don't know what to do...
So...when i'm trying to put it in download mode it stays like this and the PC doesn't recognize it.
The only way to connect the phone to the computer is to put it in recovery mode (Backup & Restore) by holding Volume Up and Power Button at the same time with the phone turned off. It should appear something like this. The PC recognizes the phone but only in ADB. Look.
The third possible screen, which also is useless is this by typing in the CMD the following: "adb reboot recovery" (click). Here, the PC doesn't recognize the phone too.
Fastboot doesn't work.
And that's my problem. I don't know what to do.
unkn0wn68 said:
The PC recognizes the phone but only in ADB. Look.
Click to expand...
Click to collapse
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
iowabowtech said:
If there are any custom roms that will run on your phone, adb push it to the sdcard and flash in TWRP.
Click to expand...
Click to collapse
I have permission problems...
unkn0wn68 said:
I have permission problems...
Click to expand...
Click to collapse
?
Your screenshot above shows the device being recognized via adb in recovery. What permission problems?

SOLVED: no boot, no recovery, no adb

Hi,
I'm using TRWP 2.8 on my nexus10. While flashing a new ROM TRWP hangs (30 Minutes) and I have to turn off the device. Now I only can start the bootloader, nothing more. I have tried to get an adb connection but no device is found. I have tried it from my mac and also from a win10 .
Is my device now dead for ever ??
Thx
harvey
harvey186 said:
Hi,
I'm using TRWP 2.8 on my nexus10. While flashing a new ROM TRWP hangs (30 Minutes) and I have to turn off the device. Now I only can start the bootloader, nothing more. I have tried to get an adb connection but no device is found. I have tried it from my mac and also from a win10 .
Is my device now dead for ever ??
Thx
harvey
Click to expand...
Click to collapse
Turn it on and let the battery run completely empty. Recharge and try again.
mr.natural said:
Turn it on and let the battery run completely empty. Recharge and try again.
Click to expand...
Click to collapse
I know this trick and I have tried it two times. But it's still the same. And by the way, I can't stop booting. Either it's booting til the "Google" is shown or when I push the volume button it's booting into the boot loader. But it never stops booting.
harvey186 said:
Hi,
I'm using TRWP 2.8 on my nexus10. While flashing a new ROM TRWP hangs (30 Minutes) and I have to turn off the device. Now I only can start the bootloader, nothing more. I have tried to get an adb connection but no device is found. I have tried it from my mac and also from a win10 .
Is my device now dead for ever ??
Thx
harvey
Click to expand...
Click to collapse
you ****ed up the partitions most likely. If you can get fastboot then restore stock firmware (fresh start that sh*t my n****). If you can't get any fastboot connection at all, try reinstalling the drivers and sh*t. If that doesn't fix it, I think you're ****ed.
heres a new one for 100$ https://www.amazon.com/gp/product/B06XNX91YB/
Galaxyninja66 said:
you ****ed up the partitions most likely. If you can get fastboot then restore stock firmware (fresh start that sh*t my n****). If you can't get any fastboot connection at all, try reinstalling the drivers and sh*t. If that doesn't fix it, I think you're ****ed.
heres a new one for 100$ https://www.amazon.com/gp/product/B06XNX91YB/
Click to expand...
Click to collapse
Thx for help. Yesterday I have found a solution. While the black boot screen which the Google shows I get a adb connection to the N10. So I was able the start 'adb reboot recovery' and the device was booting into TWRP And now I was able to flash OmniROM 7.2.1
harvey186 said:
Thx for help. Yesterday I have found a solution. While the black boot screen which the Google shows I get a adb connection to the N10. So I was able the start 'adb reboot recovery' and the device was booting into TWRP And now I was able to flash OmniROM 7.2.1
Click to expand...
Click to collapse
You can better use TWRP 3.1.1 for manta. File: https://androidfilehost.com/?fid=961840155545587690

Hard bricked my phone please help

Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power

Categories

Resources