Hello,
I think my Samsung Galaxy S4 - GT-9506 is Hard Bricked. Screen is black - regardless if i press the power-button, home and Volume-Down or Up. Odin didn't recognize the Phone. But i installed OPST cause the phone was recognized as Qualcom HS-USB QDLoader 9008. When i start the QPST Software Download Program it tells me that there is a phone connected to COM6 in Download Mode. I think this is a good sign but i don't know how to use QPST and I also have no recovery Image for QPST and my GT-9506. Can somebody help me?
Nobody here who can help me?
No Boot - No Recovery - No Download Mode Unbrick Guide
Qualcomm HS-USB QDLoader 9008 or Secure booting error (No Boot - No Recovery - No Download Mode) or "QHSUSB_BULK"
Hi team, if you have come here I'm sorry you are having this problem! But my friend and I have been to hell and back trying to fix this problem and we wanted to share our method of success for any poor soul who is experiencing the same thing! For our situation the USB was unplugged half way through flashing a KDZ or going back to stock firmware and created the No Boot - No Recovery - No Download Mode problem.
This has only been tested on the D855.. Just so you know.
First off, here are some links which you may need to have a look at if you have not done so already. Most of the bricking problems have already been extensively talked about by people here on XDA. For the method that works, we had to pull information from everywhere and spent a long time looking for the solution.
How to go back to stock - http://forum.xda-developers.com/showthread.php?t=2785089
Link for TOTs and KDZ's from the above thread - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
The Main Fix for the problem - http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
The G2 version of the fix (for reference if you still have problems 55+ pages) http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
This is your last stop shop if everything is broken and nothing works, involves hardware fix - http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
The problem we encountered several times with all of the described methods above, is that many do not describe important things. While the main fix thread for the Qualcomm HS-USB QDLoader 9008 mode, which is shown in device manager, is very well written and detailed, the programs which are linked in this thread are questionable and haven't worked for many users with some offering to fix for money. We searched the internet and located a working version of the program which worked without giving a "Device was not found in dload trying to flash programmer" like the one provided on the XDA page. Use the links below for a working version from this thread http://androidforums.com/threads/lg-g2-not-turning-on-help.916865/
My first point is if you are having problems with any of the things, CHANGE YOUR USB CABLE or use the stock cable (I know most experienced users know this). The reason for this problem has something to do with different USB cables being made for different purposes and are of different qualities. Having an error on the USB ports gave us only qhsusb_bulk on windows device manager, without Qualcomm HS-USB QDLoader 9008 as well.
If you are still having problems, check your USB ports. It is really important to make sure this isn't the problem or you will be trying to fix this problem endlessly.
First attach the USB cable to the computer. When you plug your phone in, make sure you attempt to enter download mode by holding the volume up button when you plug the USB into your phone. Even though the phone will not enter "Download Mode" It will allow the phone to be detected by your computer (at which point you can release the buttons, it should then show "Qualcomm HS-USB QDLoader 9008" under ports. If this is not displayed you have a problem with the USB cable or port, or your phone is hard bricked and you need to head to the above guide for the hardware fix. If you have followed so far and are wondering what to do from here, once the "Main Fix" guide ends, head over to the "How to go back to Stock" thread above. Your phone should be showing "firmware upgrade" and you can proceed to flash a new updated KDZ on your device then everything will work and your nightmare should be over!
Working Boarddiag - https://drive.google.com/file/d/0BzkqP9M0LLWQUkEyRkZrVHlEbDg/view
Qualcomm USB Drivers (Essential for the aforementioned "Main Fix" above) - https://drive.google.com/file/d/0BzkqP9M0LLWQblF6Vl9OcUkwUDA/view
LG United Drivers (Phone Drivers) - https://drive.google.com/file/d/0BzkqP9M0LLWQUURDTHlYOW5YRms/view
If this helped you to fix your nightmare don't forget to hit the thanks button!
The "Wroking Boarddiag" asks for PW. aside from that, very good find, thanks
detected as qdloader hs usb 9008
board diag- ap check failed device not in downld mode
For all people with Windows 10 an problems with drivers (device is detected by Windows but app is not connecting). Decompress de correct cab for your Windows version, and update the driver "Qualcomm HS-USB QDloader 9008" with the path you used to extract. Now this driver isn't advertising that isn't signed anymore, and all apps will connect with your LG G3
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x86
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x64
Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?
MrMuli said:
Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?
Click to expand...
Click to collapse
I just fixed my Lg g3 with this method. Not sure if it will work with AndroidNetUSB
Would like to help for any difficulties. (e.g. Not able to find TOT file) etc.
Thanks to @Orcam & @kryptonite
This did not work. Here's what I tried:
1. Without battery
2. Changed drivers as @shawe_ewahs says
3. With battery
4. Admin and non-admin
5. Changing COM ports
But, every time, I get:
"Device was not found in dload trying flash programmer
TEST Aborted!!"
My LG G3 D851 is in Qualcomm HS_USB QDLoader 9008 (COM 41) so I know it is in the correct mode! Agh, it is very frustrating. Any help is appreciated. Thanks.
Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*
furiify said:
Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*
Click to expand...
Click to collapse
No problem. Hope it didn't take you as long as it took us to find all the right stuff
I'm having this problem, but when I plug in without a battery all that shows up in device manager is "Unknown USB Device (Device Descriptor Request Failed)". I tried to do the hardware fix and was able to force the device to reboot by touching the pins. But all that happens is it disconnects and reconnects from USB without being detected properly.
I should note that when I turn the phone on right now, it stays stuck in the initial LG G3 splash screen. When I plug in without a battery, it shows an empty battery icon with a wire and a triangle question mark.
Any idea what I'm doing wrong? I think if I can just figure out how to get my machine to detect my phone as the qdloader hs usb 9008 I can figure out the rest.
The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.
Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.
Dr1t3r said:
The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.
Click to expand...
Click to collapse
phaim said:
Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.
Click to expand...
Click to collapse
Sounds like it may be a problem with windows from what you two have said. Perhaps compatibility mode is the way to go. They did release a pretty major windows 10 update since I posted this guide.
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins and entering fastboot but i was unsuccesfull doing that. Please help me out...:crying:
Kumar Harshdeep said:
My YU5510A stock android hard bricked i have stock rom and everything but my yureka plus is not getting detected by my laptop(I am thinking qhusb bulk driver,qhusb qdloader 9008 and 9006 mode drivers is needed but i don't have that please reply the files link in reply). I have also tried shorting pins and entering fastboot but i was unsuccesfull doing that. Please help me out...:crying:
Click to expand...
Click to collapse
Qualcomm drivers. Get it from http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
qhsusb bulk drivers needed urgent...
Dear Nischait,
In qualcomm drivers list only qdloader 9008 is listed qhsusb bulk driver is not present in your given file link. I have scrolled and searched for qhsusb_bulk but i didn't found it i have attached a screenshot from pc check it out.
Kumar Harshdeep said:
Dear Nischait,
In qualcomm drivers list only qdloader 9008 is listed qhsusb bulk driver is not present in your given file link. I have scrolled and searched for qhsusb_bulk but i didn't found it i have attached a screenshot from pc check it out.
Click to expand...
Click to collapse
http://xiaomitips.com/guide/how-to-manually-install-qualcomm-qdloader/
Install selected , install anyway.
i was gonna flash custom rom, after that it's get error and after i reboot it it nothing show, only the notification light is blinking
when i connect it to my computer it show the driver has been listed
qualcomm hs-usb qdloader 9008 so i think it's been in edl mode
when i try to flash it using mi flash it need authorization account so i try other option
i used qpst but it always show "download fail firehose fail fhloader fail process fail"
anyone can help?, please
Ps: my device is global rom
Code:
https://miui.blog/redmi-note-7/unbrick-redmi-note-7-without-authorized-mi-account-edl-test-point-mode/
Use this method to flash rom / unbrick it.
Hi
DuazTech said:
i was gonna flash custom rom, after that it's get error and after i reboot it it nothing show, only the notification light is blinking
when i connect it to my computer it show the driver has been listed
qualcomm hs-usb qdloader 9008 so i think it's been in edl mode
when i try to flash it using mi flash it need authorization account so i try other option
i used qpst but it always show "download fail firehose fail fhloader fail process fail"
anyone can help?, please
Ps: my device is global rom
Click to expand...
Click to collapse
It looks like you are in the EDL mode (Emergency Download).
Try to press only the power button between 5 and 10 seconds without any cable plugged !
Hello everyone, so, unfortunately, my three month old Note 7 got bricked after an unsuccesful ROM flashing.
I have read this guide and set up everythin accordingly before the part where the phone needs to be opened: https://forum.xda-developers.com/redmi-note-7/how-to/guide-steps-to-unbrick-redmi-note-7-t3922543 ,
I noticed that when I plug in my phone without opening it, it's already in QDLoader 9008 mode so I installed the Qualcomm drivers and all was good. However, I always get a sahara error when flashing the rom using QFIL
Is it necessary that I open my phone to short the test points or should I just keep trying with the different USB ports of my laptop?