Related
No Boot - No Recovery - No Download Mode Unbrick Guide
Qualcomm HS-USB QDLoader 9008 or Secure booting error (No Boot - No Recovery - No Download Mode) or "QHSUSB_BULK"
Hi team, if you have come here I'm sorry you are having this problem! But my friend and I have been to hell and back trying to fix this problem and we wanted to share our method of success for any poor soul who is experiencing the same thing! For our situation the USB was unplugged half way through flashing a KDZ or going back to stock firmware and created the No Boot - No Recovery - No Download Mode problem.
This has only been tested on the D855.. Just so you know.
First off, here are some links which you may need to have a look at if you have not done so already. Most of the bricking problems have already been extensively talked about by people here on XDA. For the method that works, we had to pull information from everywhere and spent a long time looking for the solution.
How to go back to stock - http://forum.xda-developers.com/showthread.php?t=2785089
Link for TOTs and KDZ's from the above thread - http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
The Main Fix for the problem - http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
The G2 version of the fix (for reference if you still have problems 55+ pages) http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
This is your last stop shop if everything is broken and nothing works, involves hardware fix - http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
The problem we encountered several times with all of the described methods above, is that many do not describe important things. While the main fix thread for the Qualcomm HS-USB QDLoader 9008 mode, which is shown in device manager, is very well written and detailed, the programs which are linked in this thread are questionable and haven't worked for many users with some offering to fix for money. We searched the internet and located a working version of the program which worked without giving a "Device was not found in dload trying to flash programmer" like the one provided on the XDA page. Use the links below for a working version from this thread http://androidforums.com/threads/lg-g2-not-turning-on-help.916865/
My first point is if you are having problems with any of the things, CHANGE YOUR USB CABLE or use the stock cable (I know most experienced users know this). The reason for this problem has something to do with different USB cables being made for different purposes and are of different qualities. Having an error on the USB ports gave us only qhsusb_bulk on windows device manager, without Qualcomm HS-USB QDLoader 9008 as well.
If you are still having problems, check your USB ports. It is really important to make sure this isn't the problem or you will be trying to fix this problem endlessly.
First attach the USB cable to the computer. When you plug your phone in, make sure you attempt to enter download mode by holding the volume up button when you plug the USB into your phone. Even though the phone will not enter "Download Mode" It will allow the phone to be detected by your computer (at which point you can release the buttons, it should then show "Qualcomm HS-USB QDLoader 9008" under ports. If this is not displayed you have a problem with the USB cable or port, or your phone is hard bricked and you need to head to the above guide for the hardware fix. If you have followed so far and are wondering what to do from here, once the "Main Fix" guide ends, head over to the "How to go back to Stock" thread above. Your phone should be showing "firmware upgrade" and you can proceed to flash a new updated KDZ on your device then everything will work and your nightmare should be over!
Working Boarddiag - https://drive.google.com/file/d/0BzkqP9M0LLWQUkEyRkZrVHlEbDg/view
Qualcomm USB Drivers (Essential for the aforementioned "Main Fix" above) - https://drive.google.com/file/d/0BzkqP9M0LLWQblF6Vl9OcUkwUDA/view
LG United Drivers (Phone Drivers) - https://drive.google.com/file/d/0BzkqP9M0LLWQUURDTHlYOW5YRms/view
If this helped you to fix your nightmare don't forget to hit the thanks button!
The "Wroking Boarddiag" asks for PW. aside from that, very good find, thanks
detected as qdloader hs usb 9008
board diag- ap check failed device not in downld mode
For all people with Windows 10 an problems with drivers (device is detected by Windows but app is not connecting). Decompress de correct cab for your Windows version, and update the driver "Qualcomm HS-USB QDloader 9008" with the path you used to extract. Now this driver isn't advertising that isn't signed anymore, and all apps will connect with your LG G3
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x86
Qualcomm HS-USB QDLoader 9008 2.1.0.5 x64
Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?
MrMuli said:
Hi, I have the same problem, except that when I connect the usb, it shows up as "LGE AndroidNetUSB Serial Port". I'm not sure if I should try the Qualcomm route?
Click to expand...
Click to collapse
I just fixed my Lg g3 with this method. Not sure if it will work with AndroidNetUSB
Would like to help for any difficulties. (e.g. Not able to find TOT file) etc.
Thanks to @Orcam & @kryptonite
This did not work. Here's what I tried:
1. Without battery
2. Changed drivers as @shawe_ewahs says
3. With battery
4. Admin and non-admin
5. Changing COM ports
But, every time, I get:
"Device was not found in dload trying flash programmer
TEST Aborted!!"
My LG G3 D851 is in Qualcomm HS_USB QDLoader 9008 (COM 41) so I know it is in the correct mode! Agh, it is very frustrating. Any help is appreciated. Thanks.
Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*
furiify said:
Thanks you SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO much! <3 I finally was able to fix my device *O*
Click to expand...
Click to collapse
No problem. Hope it didn't take you as long as it took us to find all the right stuff
I'm having this problem, but when I plug in without a battery all that shows up in device manager is "Unknown USB Device (Device Descriptor Request Failed)". I tried to do the hardware fix and was able to force the device to reboot by touching the pins. But all that happens is it disconnects and reconnects from USB without being detected properly.
I should note that when I turn the phone on right now, it stays stuck in the initial LG G3 splash screen. When I plug in without a battery, it shows an empty battery icon with a wire and a triangle question mark.
Any idea what I'm doing wrong? I think if I can just figure out how to get my machine to detect my phone as the qdloader hs usb 9008 I can figure out the rest.
The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.
Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.
Dr1t3r said:
The boarddiag v3.99 version 1 and 2 dont work, they dont even get ejecuted, not eve trying to execute as administrator.
Click to expand...
Click to collapse
phaim said:
Just wanted to reply since I resolved my issue. It turned out that, despite the apparent inability to boot into download mode, I discovered that if I booted up the phone with a battery in it and plugged into a windows 7 laptop, and held the button down to enter download mode, it eventually let me into download mode. I really can't explain why this worked, but just wanted to put it out there. It was at least a few minutes before I noticed that the laptop chirped and it was showing the install screen in download mode.
Hope this helps someone out.
Click to expand...
Click to collapse
Sounds like it may be a problem with windows from what you two have said. Perhaps compatibility mode is the way to go. They did release a pretty major windows 10 update since I posted this guide.
Okay so long story short: I unlocked my bootloader, flashed twrp and things like that and tried to flash lineage. This was all using the Axon 7 tool. I did something wrong and now I can't get into any other mode but EDL mode. The phone shows up in Miflash but I always get some "cant read hello packet error" and it tries to "reset" and end it eventually just stops and gives me an error. Plz help.
daevion0 said:
Okay so long story short: I unlocked my bootloader, flashed twrp and things like that and tried to flash lineage. This was all using the Axon 7 tool. I did something wrong and now I can't get into any other mode but EDL mode. The phone shows up in Miflash but I always get some "cant read hello packet error" and it tries to "reset" and end it eventually just stops and gives me an error. Plz help.
Click to expand...
Click to collapse
I assume you're not on Windows 10 x64? If you aren't, either get a PC with Win10 x64, or do this:
Connect the phone, get into EDL mode. Now go to the Device Manager, and tell me where it appears.
It can appear as:
-"Qualcomm HS-USB QDLoader 9008" under Ports (COM & LPT);
-"ZTE DFU Interface, under Ports too; or
-"QUSB_BULK" under Universal Serial Bus devices or unknown devices.
If it appears as the DFU stuff, you'll have to follow the 4th category brick repair guide. If it appears as QDLoader, right click on it, then Properties, then go to Bits per second and put the number at 115200 or 128000 if it's not there. Then hold the 3 buttons (vol and power) until Windows beeps and the device manager spazzes and the phone flashes the red led, then try MiFlash again.
If it appears as QUSB_BULK, uninstall the driver (tick delete driver software too) and restart edl.
Choose an username... said:
I assume you're not on Windows 10 x64? If you aren't, either get a PC with Win10 x64, or do this:
Connect the phone, get into EDL mode. Now go to the Device Manager, and tell me where it appears.
It can appear as:
-"Qualcomm HS-USB QDLoader 9008" under Ports (COM & LPT);
-"ZTE DFU Interface, under Ports too; or
-"QUSB_BULK" under Universal Serial Bus devices or unknown devices.
If it appears as the DFU stuff, you'll have to follow the 4th category brick repair guide. If it appears as QDLoader, right click on it, then Properties, then go to Bits per second and put the number at 115200 or 128000 if it's not there. Then hold the 3 buttons (vol and power) until Windows beeps and the device manager spazzes and the phone flashes the red led, then try MiFlash again.
If it appears as QUSB_BULK, uninstall the driver (tick delete driver software too) and restart edl.
Click to expand...
Click to collapse
I'm on win10 64bit
daevion0 said:
I'm on win10 64bit
Click to expand...
Click to collapse
Then do everything I described above or just try another PC. It always happens that one PC can be decided not to let you unbrick your phone for some reason
Choose an username... said:
Then do everything I described above or just try another PC. It always happens that one PC can be decided not to let you unbrick your phone for some reason
Click to expand...
Click to collapse
Is there no other option? is there no other way to at least get fast boot mode back on my phone?
daevion0 said:
Is there no other option? is there no other way to at least get fast boot mode back on my phone?
Click to expand...
Click to collapse
Lol nope, not if EDL is not working for you. You still didn't tell me whether you have a DFU brick or not. If you do have a DFU brick the only surefire way is to disassemble your phone and short a testpad, so don't complain.
Try what I told you above. It may be that it's set at 9600 baud
daevion0 said:
Okay so long story short: I unlocked my bootloader, flashed twrp and things like that and tried to flash lineage. This was all using the Axon 7 tool. I did something wrong and now I can't get into any other mode but EDL mode. The phone shows up in Miflash but I always get some "cant read hello packet error" and it tries to "reset" and end it eventually just stops and gives me an error. Plz help.
Click to expand...
Click to collapse
1. You must use "Qualcomm HS-USB QDLoader 9008" driver (there is another one call zidag but it's not work here)
2. As soos as you enter EDL mode, you must press "Flash" as quick as possible
i'm in a similar situation... i did "fastboot oem lock" and now i'm in a loop trying to boot the phone, after the 3time it enters edl (i see the red light).
My model is de G model (2017G) can i use miFlash just to restore the recovery and fastboot?
i had installed lineageOS, when connecting my phone it says that is the U model (2017U) but i think is only a label tag from the rom...
Thansks for the help!!
A 64 bit computer is not really necessary, however it is adviced.
I used a 32bit laptop running Win 10 to rescue mine.
Drivers seem to be a major problem, having the correct up to date drivers is a must.
Also try using Edl Tool and the Axon7 tool kit to access flashing.
Zadig drivers can help in some instances.
With the error you are receiving, have you tried another Edl package?
I was using an Edl package that would not finish flashing either, try a different package and make sure its correct for your phone.
I hope you get it sorted
The hello read package does occur when the phone is not really EDL mode anymore. You always have to restart the phone and boot manually into EDL mode with + - Power and you have to reboot everytime you did or if the hello error happens.
Look under device manager if it says Qualcomm instead of ZTE Device Handset. If that is the case you can build your own EDL cable.
"First I opened the cable and cut the Black and green open, then I connected all the black and green one together and pressed the power button until the red led was gone and 2 additional seconds.
After that I disconnected the modded cable and connected the Phone to the PC with the orginal cable and it showed up as Qualcomm HS-USB QDLoader 9008. "
You can install the qualcomm drivers under the MiFlash tab in the latest version.
i finally solve my issue following the guide: https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898 there is also a resume on https://forum.xda-developers.com/axon-7/how-to/guide-dfu-unbrick-guide-disassembly-t3731152
As the title says, I can't get miflash to see my device so I can downgrade and unlock. I've been through every guide most likely and have tried every possible combination I can think of. So my question is, is there anyway I can root and unlock on b32 without edl?
The device works fine, adb, Qualcomm drivers all work as they are supposed to and again, many different approaches to try and get it to work but have had no success getting miflash to see my device in edl.
If it makes a difference I downgraded to b19
I'm still a rookie but far from a newb, is there anyway around me having to hunt down another computer that might make miflash see my device?
Desperate
There's no way man cause u need to unlock your bootloader and bootloader is disabled in b32, so u'll need edl mode in order to flash b19 booltloader to root, if your pc does not recognize your device you might want to try in a different pc or maybe change the usb cable you using that might help
Thanks man. The crazy thing is one of the tool kits can see the device in edl as it checks for the just before it prompts miflash to open but then miflash doesn't see it.
Does your phone show in Device Manager when you put it in EDL mode? If so, what does it say? QUSB_BULK or Qualcomm HS-USB QLoader 9008 (COMn)
I do recall it saying Qualcomm hs-usb qloader once or twice before, one of the times I uninstalled and reinstalled everything. Other than that I recall it saying qusb_bulk. Is that what's killing it for me?
BTW I finally got it to downgrade to b19 through SD card upgrade in the stock recovery but still no luck with miflash recognizing it.
Also I just tried to reboot to bootloader from stock recovery and it still boots me into the ROM :/
I had the "QUSB_BULK" message instead of the Qualcomm Qloader thing a while back.
Took a while to realise I didn't have .NET Framework 3.5 installed. The moment I installed it, MiFlash detected and everything was fine. I would also advice you to make those Qualcomm driver and MiFlash installations in Driver-Enforcing mode.
Also, the bootloader doesn't work as they disabled it on B19 upwards. You can fix it with the FASTBOOT_UNLOCK zip from this thread: https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Solved!!! I had to install miflash on the D; hard drive not the C; for some odd reason.. Hit refresh and it immediately recognized the device. Happy days people. Happy days
Lol, that's a new one. Glad you got it solved.
Lol me too, literally days... I was beginning to question myself.
Hi, I have (or used to) the GSI Android P Rom on my A1, I saw that an update was avalible for it on the official Telegram group so I decided to download and install it, I wiped vendor as it said and flash the zip files, but I forgot to flash the vendor image again, I rebooted and now the screen is completely black, the phone is dead, the led is not making anything aswell, not even blinking, I'm trying to reboot into fastboot or TWRP with the volume keys but doesn't make anything, I tried to connect it to the PC and it recognizes it as Qualcomm HS-USB Diagnostics 900E (COM10).
I don't know what to do, I'm so worried about this, any idea?
Try to flash stock rom via miflash
If it says Qualcomm HS-USB Diagnostics 900E its not even dead. Lol
What to do next? Stop panicking & use that thing on top of your neck. It'll be fine. (& Use search button in xda, everything is here?)
https://forum.xda-developers.com/mi-a1/help/bricked-mi-a1-qualcom-hs-usb-t3784681
.:Addicted:. said:
If it says Qualcomm HS-USB Diagnostics 900E its not even dead. Lol
What to do next? Stop panicking & use that thing on top of your neck. It'll be fine. (& Use search button in xda, everything is here)
Click to expand...
Click to collapse
Hi, what if now the PC recognize it as an unknown device?
Before your reply I tried to use Qualcomm emmc studio to fix it because MiFlash wasn't recognizing it, Qualcomm did, so I tried to flash the stock ROM but it gave me an error (something about couldn't found ram), I disconected it and it appeared as an unkown device, now not even Qualcomm can recognize the phone, help
Use edl method and you should be good
Hello xda so my Mi A1 is hard bricked, I tried using and edl cable but it did'nt work so i removed the back cover, removed the battery ribbon and tried the pressing the test point, and my pc recognized it as Qualcomm HS-USB QDLoader 9008 (COM20) I tried flashing V10.0.12.0.PDHMIXM_9.0 and tissot_images_7.8.23_7.1 but i still got the same result on miflash " flashing C:/tissot_images_V10.0.12.0.PDHMIXM_9.0/images/system.img
Tried using different usb cables didnt work
tried flashing it on windows 10 pc and on a laptop with windows 7 installed didnt help either
tried using QFIL it says firehost error
Help folks, ive been searching solutions for almost 2 weeks now yet i cant seem find what should i do
I have the same problem, my only solution is to flash 10.0.24 and use my cell phone without imei code
marshmellie said:
Hello xda so my Mi A1 is hard bricked, I tried using and edl cable but it did'nt work so i removed the back cover, removed the battery ribbon and tried the pressing the test point, and my pc recognized it as Qualcomm HS-USB QDLoader 9008 (COM20) I tried flashing V10.0.12.0.PDHMIXM_9.0 and tissot_images_7.8.23_7.1 but i still got the same result on miflash " flashing C:/tissot_images_V10.0.12.0.PDHMIXM_9.0/images/system.img
Tried using different usb cables didnt work
tried flashing it on windows 10 pc and on a laptop with windows 7 installed didnt help either
tried using QFIL it says firehost error
Help folks, ive been searching solutions for almost 2 weeks now yet i cant seem find what should i do
Click to expand...
Click to collapse
Try another Fastbbot Image or downgrade miui version, try from here
Hope that help