Hi,
I have been using latest resurrection remix 5.8.5 on my
Lenovo k3 note . I have dropped my phone which damaged my lcd screen. I went for screen replacement.
After screen replacement when I power on my phone it starts out with no problem and everything is fine . When I lock my screen and wake up my device the screen does not wake up and shows black screen but touch works. when I power on again after removing battery everything is fine till I lock my screen and same problem visits again.i tried to install lineage , miui 9 it shows the same problem.
Then I flashed the stock rom from Lenovo now everything is fine and screen locks and wakes up normally.
The problem exist only for custom ROM.
Please help me to solve this issue as I am very much interested in Having custom ROM in my mobile
Thank you for your help in advance.
Hi,
I have the same issue. My screen works perfect on stock rom but when i flashed my phone with custom roms screen doesn't wake up.When somebody calls me , screen is black (actually i can't see who calls me) but touchscreen works because when I slide on the screen bottom-to-right the dialogue starts. Can somebody helps us ? Thanks in advance.
Here is the link of my Cyanogen mod 12.1.1 for lenovo k3 note currently using work perfect
https://forum.xda-developers.com/member.php?u=6921558
Related
Can anyone help me?
When I install a aosp rom like the 4.4.4 roms
Everything works fine exept that during a call the screen goes black and there is no way to turn it back on again, only a reboot works.
I'm currently on the phoenix rom and that works good, also Imperium works fine.
With slimsaberkatrom or a Google edition tom I get the screen freeze.
Samsung s4 gt-i9505
You tried on PA and CM?
On Paranoid Android or CyanogenMod you have the same issue?
Yes, also tried paranoid rom, same issue.
Everything works exceptioneel the dialer
abarthcoupe said:
Can anyone help me?
When I install a aosp rom like the 4.4.4 roms
Everything works fine exept that during a call the screen goes black and there is no way to turn it back on again, only a reboot works.
I'm currently on the phoenix rom and that works good, also Imperium works fine.
With slimsaberkatrom or a Google edition tom I get the screen freeze.
Samsung s4 gt-i9505
Click to expand...
Click to collapse
Proximity sensor issue? Try recalibration while on a stock based ROM then reflashing aosp.
Seems like a proximity sensor problem. Used xposed installer to disable the sensor,and seems tot work fine now.
Hi
I have been experiencing this issue on the A6000 plus since the past week. Once in a while (around 2-3 times every day) the phone goes into a deep sleep kind of state where the screen won't turn on even after pressing the power button numerous times. This issue has become so irritating that I am considering going for a refund. The phone works properly only after the battery has been removed and re-inserted. Does anyone have a solution to this problem ? Please share. I also believe other users are also facing this issue but I could not find any solution to it - https://forums.lenovo.com/t5/A-Seri...ovo-A6000-plus-suddenly-turn-off/td-p/2089154
lenovo a6000 sleeping problem solved
I was also facing very deep sleepibg problem in my lenovo a6000..
U can easily control this problem just remove your screen locks only.
Just use none or slide lock for screen Lock..
99% it will work for all lenovo a6000 gadgets..
Hope you will try and enjoy it.
A6000plus got hard bricked plz help
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
srkale55 said:
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
Click to expand...
Click to collapse
try the step by step mentioned in threah Unbrick Lenovo A6000/plus
sorry I'm new user so I could provide link yet
Sugreev said:
I was also facing very deep sleepibg problem in my lenovo a6000..
U can easily control this problem just remove your screen locks only.
Just use none or slide lock for screen Lock..
99% it will work for all lenovo a6000 gadgets..
Hope you will try and enjoy it.
Click to expand...
Click to collapse
Having the same problem with my Lenovo A6000 Plus. Flashed numerous roms, but to no avail...... Also tried your method did not work.
srkale55 said:
guys
i have lenovo a6000 plus
i flashed lolypop stock rom by twrp
now my phone got bricked
my phone doesnt boot into twrp
i have tried in mobile repairs shop also but they also could not repair it
plz help me
Click to expand...
Click to collapse
...............................................................
hi bro...iam naveen, iam also facing same problem. i have a solution for u,,,in youtube search"unbrick solution for lenovo a6000" video and follow that procedure and u will get back your phone into working condition.
yeah.... i got the same but even when i removed and re-inserted the battery it won't work. after press the on button just lenovo only shown. then nothing could happen....! what should i do..? please help me guys
I was facing this issue in cm 11 but successfully solved by installing rom and kernel again
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
johnbabu said:
Hi all,
I am having this problem in CM 12.1 , like the screen goes black while a call is initiated.The screen wont turn up untill the call is disconnected.
I tried different nightlies , even the latest one , but problem is still there. my baseband version is DDUHOA1
Does the modem have any role in this issue? Or is it a hardware issue ?
The proximity sensor works fine on stock rom or any other roms that i have installed so far, including cm based other roms like GearCM ,Euphoria. But on official cm 12.1 the issue pops up..
please help..
Click to expand...
Click to collapse
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
ireaper4592 said:
this is due to proximity sensor happens to me all the time if u have xposed installed then download sensor disabler in xposed download section that will stop black screen on calls hope that helps u
Click to expand...
Click to collapse
Thanks for the reply ,
I installed Xposed . and then Sensor Disabler. Turned off Proximity sensor as you said
but no luck . The issue is still there.
Hi All,
I have been facing this issue for a while now. The auto sleep function stopped working on my lenovo zuk z1 and whenever there is any notification on my phone the screen lights up(mostly Snapchat) and then it doesn't go to sleep automatically(by default 15 seconds). I tried to switch off/on multiple times, change the theme, etc but to no avail.
Also when the screen lights up and kept as such for some time, it gets so heated up that I can't hold it for a while.
Please suggest if you have encountered same issue.
Thanks in advance.
Tanveer13 said:
Hi All,
I have been facing this issue for a while now. The auto sleep function stopped working on my lenovo zuk z1 and whenever there is any notification on my phone the screen lights up(mostly Snapchat) and then it doesn't go to sleep automatically(by default 15 seconds). I tried to switch off/on multiple times, change the theme, etc but to no avail.
Also when the screen lights up and kept as such for some time, it gets so heated up that I can't hold it for a while.
Please suggest if you have encountered same issue.
Thanks in advance.
Click to expand...
Click to collapse
Please provide some facts like: rom and version, twrp version, mods, apps...
strongst said:
Please provide some facts like: rom and version, twrp version, mods, apps...
Click to expand...
Click to collapse
Cyanogen OS 12.1
Android version 5.1.1
How do i check twrp version?
Tanveer13 said:
Cyanogen OS 12.1
Android version 5.1.1
How do i check twrp version?
Click to expand...
Click to collapse
Do you have twrp installed and rooted your device? Or is it stock?
strongst said:
Do you have twrp installed and rooted your device? Or is it stock?
Click to expand...
Click to collapse
As lenovo zuk z1 runs on Cyanogenmod, so i believe it isn't stock.
I haven't installed twrp but isnt lenovo zuk z1 rooted by default as it runs on Cyanogenmod?
Tanveer13 said:
As lenovo zuk z1 runs on Cyanogenmod, so i believe it isn't stock.
I haven't installed twrp but isnt lenovo zuk z1 rooted by default as it runs on Cyanogenmod?
Click to expand...
Click to collapse
You mean Cyanogen OS 12.1. That's not cyanogenmod. There's no root out of the box activated in Cyanogen OS.
Please be sure what you have, I can't look in your mind. If you are not familiar with some words please consider to Google it for understanding.
I guess you have a stock device, so your only way is to clear cache in bootloader/recovery menu and if that doesn't help you should backup everything and make a factory reset.
Dear dev,
I am facing an issue on oreo Roms, the display does not respond on screen unlock. But works again after turning it off and back on again. It is the same case with proximity sensor during calls. Please help me with this issue.
This is the link of the logcat file of my device.
Thank You,
Device - Redmi 2 Prime
Recovery - Redwolf Recovery
ROM - Bootleggers v2.3 20180712
PS: I faced this issue with lineage os 14 but not with rr 5.8 and aosp 4.6
Edit: I think it is an issue of SOD as I face the same issue in TWRP and Lineages Oreo Roms
Please Help me in this issue