Related
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
linuxhost said:
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
Click to expand...
Click to collapse
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
adokitkat said:
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
Click to expand...
Click to collapse
Thank you for your reply, adokitkat.
adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Yes pls
appollokillers1 said:
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Click to expand...
Click to collapse
That will be great thanks.
adokitkat said:
That will be great thanks.
Click to expand...
Click to collapse
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
appollokillers1 said:
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
Click to expand...
Click to collapse
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
adokitkat said:
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
Click to expand...
Click to collapse
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
appollokillers1 said:
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
Click to expand...
Click to collapse
It was ok for them, i dont know why not for me .. At least it worked one time.. And i never heard of it, i was trying to use all common root programs and nothing .. I will check it out, thanks
TWRP link is down, mind passing on a new one
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?
Is there a Z17 Mini S international/EN ROM version? I haven't found one on their site nor anywhere on the internet, can someone please help, do I use some other ROM (the one for z17S perhaps) or do I just have to flash, root and install gapps on the chinese rom as the only solution?
looking for a diferent rom too.....
Looking forward to it :crying:
fxllxn said:
Is there a Z17 Mini S international/EN ROM version? I haven't found one on their site nor anywhere on the internet, can someone please help, do I use some other ROM (the one for z17S perhaps) or do I just have to flash, root and install gapps on the chinese rom as the only solution?
Click to expand...
Click to collapse
I received my Z17 mini S with International Firmware EN, with gapps . Android 7.1.1 , Nubia UI 5.17.6.20 , Firmware NX589J_ENCommon_V1.01 . Works Perfect, love this phone
wwwDOTup-4everDOTcom/27gya085krcw Firmware Download
How to:
1. transfer to the phone.
2. go to Settings -> System upgrade -> Local update.
3. Choose from Local -> point the file -> install now.
4. the phone should reboot twice.
diogoasisti said:
I received my Z17 mini S with International Firmware EN, with gapps . Android 7.1.1 , Nubia UI 5.17.6.20 , Firmware NX589J_ENCommon_V1.01 . Works Perfect, love this phone.
Click to expand...
Click to collapse
Does this version include GApps or you need to flash them later?
I have CN V.216 and it works fine except that you don't know when downloads in Google Play will occur. It can take 2min or 2weeks
logosfp said:
Does this version include GApps or you need to flash them later?
I have CN V.216 and it works fine except that you don't know when downloads in Google Play will occur. It can take 2min or 2weeks
Click to expand...
Click to collapse
Include GApps.
Nubia z17 mini s (NX589J) problems rom
Dear all.
I'm new in this forum. Also I'm a Nubia z17 mini s (NX589J) user but not so happy about it because the device has big problems:
- Problem with Play Store (sometimes work sonetines not)
- Battery drains too fast (i have to put all the day the energy safe mode)
- Not works the direct update option from mobile settings
- Not complete translation to English or Spanish
- Other software bugs (i can't modify/remove the icons in the louncher, problems with sharing directly from ES EXPLORER apk, not possible to sync Google Keep apk, not possible to check the screen shot directly from the miniature...)
My device is:
Model=NX589J
VTELCA UI=5.0
Compilation=NX589J_CNCommon_V216
Safety Android patch=1 April 2017
Kernel=3.10.84-perf-g44dfce4-00212-g58cd867
Android=7.1.1
I am tired and I am decided to change the rom. I was reading and checking and I have doubts. Is it possible you confirm if all theses main points are correct in your device and which version you are using?
1. Problem with Play Store
2. Battery problem
3. Google Keep problem
4. Translation
Please, I would like to receive a simple summary for updating my rom with the software necessary.
Also i have found an official rom 3.04 but i have not idea about compatibility or if it is only in Chinese:
ui.nubia.cn/rom/detail/49
Please give me your feedback, instructions, links...
Thank you very much and good work
jelocum said:
Dear all.
I'm new in this forum. Also I'm a Nubia z17 mini s (NX589J) user but not so happy about it because the device has big problems:
- Problem with Play Store (sometimes work sonetines not)
- Battery drains too fast (i have to put all the day the energy safe mode)
- Not works the direct update option from mobile settings
- Not complete translation to English or Spanish
- Other software bugs (i can't modify/remove the icons in the louncher, problems with sharing directly from ES EXPLORER apk, not possible to sync Google Keep apk, not possible to check the screen shot directly from the miniature...)
My device is:
Model=NX589J
VTELCA UI=5.0
Compilation=NX589J_CNCommon_V216
Safety Android patch=1 April 2017
Kernel=3.10.84-perf-g44dfce4-00212-g58cd867
Android=7.1.1
I am tired and I am decided to change the rom. I was reading and checking and I have doubts. Is it possible you confirm if all theses main points are correct in your device and which version you are using?
1. Problem with Play Store
2. Battery problem
3. Google Keep problem
4. Translation
Please, I would like to receive a simple summary for updating my rom with the software necessary.
Also i have found an official rom 3.04 but i have not idea about compatibility or if it is only in Chinese:
ui.nubia.cn/rom/detail/49
Please give me your feedback, instructions, links...
Thank you very much and good work
Click to expand...
Click to collapse
Install English version ! ( v 1.01 )
1- No problem with PlayStore
2- For me battery life is very good
3- Google Keep works normaly
4- Translation is not 100% in your language in any firmware !
Better launcher in this phone for me is a Nova Launcher , you can find a premium version in google.
Other bugs that you mentioned works.
The better way to install a stock rom ( v 1.01 ) is :
1- Put rom V 1.01 in storage and reboot to twp recovery.
2 - Install stock rom, wipe dalvin/cache, root and reboot.
3 - If in initial setup, you get freezed in wifi settings, come to twp recovery and wipe data, ( not format data ),wipe dalvin/cache, root again, and reboot.
4 - In you got freeze in initial setup settings when it ask you to put a name, after setup a date/time, you click next without put a name, and you must be good to finish setup and enjoy the phone.
5- If you can't open sms app after update, do this: the problem of sms app, you need to do a factory reset in accessibility settings, and root again, and after its all ok
Stock Firmware ( v 1.01 ) The file to download show v 1.0. , but is 1.01, not uploaded for me.
up-4everDOTcom/27gya085krcw
diogoasisti said:
Install English version ! ( v 1.01 )
1- No problem with PlayStore
2- For me battery life is very good
3- Google Keep works normaly
4- Translation is not 100% in your language in any firmware !
Better launcher in this phone for me is a Nova Launcher , you can find a premium version in google.
Other bugs that you mentioned works.
The better way to install a stock rom ( v 1.01 ) is :
1- Put rom V 1.01 in storage and reboot to twp recovery.
2 - Install stock rom, wipe dalvin/cache, root and reboot.
3 - If in initial setup, you get freezed in wifi settings, come to twp recovery and wipe data, ( not format data ),wipe dalvin/cache, root again, and reboot.
4 - In you got freeze in initial setup settings when it ask you to put a name, after setup a date/time, you click next without put a name, and you must be good to finish setup and enjoy the phone.
5- If you can't open sms app after update, do this: the problem of sms app, you need to do a factory reset in accessibility settings, and root again, and after its all ok
Stock Firmware ( v 1.01 ) The file to download show v 1.0. , but is 1.01, not uploaded for me.
up-4everDOTcom/27gya085krcw
Click to expand...
Click to collapse
Dear friend, thank you so much for your information.
Before of starting with the process I would need your help for some points:
1. Could you explain me how to put my device in recovery mode?
2. Could you explain in detail the process for Installing stock rom, wiping dalvin/cache, and applying root? In which order?
3. What are the signs of the freezed? I don't understand
4. Could you explain step by step in detail the possible problems after doing it?
5. Have you any screenshot of the process?
6. What is the battery life? Do you need to put the mobile in energy saving mode?
7. Do you know someone who test the 3.04 official ROM from NUBIA web?
Thank you so much and I'm sorry for my big unknowledge of it.
Best regards
jelocum said:
Dear friend, thank you so much for your information.
Before of starting with the process I would need your help for some points:
1. Could you explain me how to put my device in recovery mode?
2. Could you explain in detail the process for Installing stock rom, wiping dalvin/cache, and applying root? In which order?
3. What are the signs of the freezed? I don't understand
4. Could you explain step by step in detail the possible problems after doing it?
5. Have you any screenshot of the process?
6. What is the battery life? Do you need to put the mobile in energy saving mode?
7. Do you know someone who test the 3.04 official ROM from NUBIA web?
Thank you so much and I'm sorry for my big unknowledge of it.
Best regards
Click to expand...
Click to collapse
Read this first, and do all steps to install a TWRP.
https://forum.xda-developers.com/nubia-z17-mini/how-to/generals-z17-minis-nx589j-t3773494
Second, do all steps here to install a stock firmware
wwwDOTup-4everDOTcom/27gya085krcw Firmware Download
How to:
1. transfer to the phone.
2. go to Settings -> System upgrade -> Local update.
3. Choose from Local -> point the file -> install now.
4. the phone should reboot twice.
All answers of your questions, are in the forum !!
Not works the local update
diogoasisti said:
Read this first, and do all steps to install a TWRP.
https://forum.xda-developers.com/nubia-z17-mini/how-to/generals-z17-minis-nx589j-t3773494
Second, do all steps here to install a stock firmware
wwwDOTup-4everDOTcom/27gya085krcw Firmware Download
How to:
1. transfer to the phone.
2. go to Settings -> System upgrade -> Local update.
3. Choose from Local -> point the file -> install now.
4. the phone should reboot twice.
All answers of your questions, are in the forum !!
Click to expand...
Click to collapse
Thanks diogoasisti.
Your information is good but please understand that I am not an expert. I think a guide could be perfect.
On the other hand,when i press the updating option in the mobile settings it doesn't do anything. After pressing it, the screen is the same I don't enter in the updating configuration. Could it be becsuse i have changed the mobile lenguaje to Spanish?
Thanks
So let’s go.
To enter in recovery mode, go to settings, system update and at the right top side ,you will see 3 points, there you choose local update and you select the zip file of the stock firmware that you downloaded before, you need to put the file in memory phone
Put also the twrp zip file, to install a recovery to root the phone after
So, backup your data before this operations.
Do that and return to forum and show where you are
Updating not works
diogoasisti said:
So let’s go.
To enter in recovery mode, go to settings, system update and at the right top side ,you will see 3 points, there you choose local update and you select the zip file of the stock firmware that you downloaded before, you need to put the file in memory phone
Put also the twrp zip file, to install a recovery to root the phone after
So, backup your data before this operations.
Do that and return to forum and show where you are
Click to expand...
Click to collapse
Hello friend.
I. Can't enter in the updating option. I press it on settings but nothing occurr. I am still always on the settings. Settings/update.... Nothing. I am still on settings.
Msybe is because i have changed the lenguaje to Spanish?
Thanks
jelocum said:
Thanks diogoasisti.
Your information is good but please understand that I am not an expert. I think a guide could be perfect.
On the other hand,when i press the updating option in the mobile settings it doesn't do anything. After pressing it, the screen is the same I don't enter in the updating configuration. Could it be becsuse i have changed the mobile lenguaje to Spanish?
Thanks
Click to expand...
Click to collapse
Power off the phone
Press and HOLD Volume UP and POWER button, still you see nubia name, and release, you enter in recovery mode too like that. Your language don't change nothing, you can use spanish
Step by step
diogoasisti said:
Power off the phone
Press and HOLD Volume UP and POWER button, still you see nubia name, and release, you enter in recovery mode too like that. Your language don't change nothing, you can use spanish
Click to expand...
Click to collapse
I have checked i can enterin the updating menu in the recovery system thanks.
Now i am going to do a backup of my data according to your comments.
Could you confirm with the v101 Google Play Store works correctly? Google keep syncs correctly? Can you change the WhatsApp background? An the most important thing: does the battery consumption is improved (1,day, 1,5day...)
Can i return to the same firmware status? Where can i download the originals firmware?
Thanks
jelocum said:
I have checked i can enterin the updating menu in the recovery system thanks.
Now i am going to do a backup of my data according to your comments.
Could you confirm with the v101 Google Play Store works correctly? Google keep syncs correctly? Can you change the WhatsApp background? An the most important thing: does the battery consumption is improved (1,day, 1,5day...)
Can i return to the same firmware status? Where can i download the originals firmware?
Thanks
Click to expand...
Click to collapse
All works !!!!!!!
Can return to chineese version
Only in this forum you can get the link original English version, chineese versions you know, in nubia website
Still working your version?
diogoasisti said:
All works !!!!!!!
Can return to chineese version
Only in this forum you can get the link original English version, chineese versions you know, in nubia website
Click to expand...
Click to collapse
Dear diogoasisti.
How are you? We would like to know if your version is still working correctly.
After checking the forum, main problems for NUBIA Z17 mini S are:
- Not correct updating process from Google Play Store
- Not correct synchronization (Google keep, contacts, accounts...)
- Battery drains quickly
- Whatsapp background can't be changed
If your experience is correct, please send us the links to download the correct version and explain for non-experts (like me), step by step (with screenshots perfect) how to do all the process.
Thank you so much
jelocum said:
Dear diogoasisti.
How are you? We would like to know if your version is still working correctly.
After checking the forum, main problems for NUBIA Z17 mini S are:
- Not correct updating process from Google Play Store
- Not correct synchronization (Google keep, contacts, accounts...)
- Battery drains quickly
- Whatsapp background can't be changed
If your experience is correct, please send us the links to download the correct version and explain for non-experts (like me), step by step (with screenshots perfect) how to do all the process.
Thank you so much
Click to expand...
Click to collapse
Hi
Sorry, but i can't do all process again, i use the phone daily. But will help you with process...
What i need to know :
Your firmware version?
Your Nubia ui version?
Phone rooted?
TWRP Recovery?
After this answers, i can help you.
Just for show you that Google play works normally
NUBIA updating
diogoasisti said:
Hi
Sorry, but i can't do all process again, i use the phone daily. But will help you with process...
What i need to know :
Your firmware version?
Your Nubia ui version?
Phone rooted?
TWRP Recovery?
After this answers, i can help you.
Click to expand...
Click to collapse
Thank you for your constant help.
Attached you have my firmware information:
- Firmaware version = NX589J_CNCommon_V216
- Nubia UI version = Android 7.1.1
- Rooted = Not (How can I do it?)
- TWRO Recovery = I don't know how to check your question about TWRP
I send a photo of my system. h t t p s : / / i b b . c o / d f j R r y
Thanks.
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
fr4nk32 said:
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
Click to expand...
Click to collapse
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Dadditz said:
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Click to expand...
Click to collapse
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
fr4nk32 said:
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
Click to expand...
Click to collapse
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery
(name.of.recovery).img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Dadditz said:
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery.img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Click to expand...
Click to collapse
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
fr4nk32 said:
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
Click to expand...
Click to collapse
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Dadditz said:
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Click to expand...
Click to collapse
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
fr4nk32 said:
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
Click to expand...
Click to collapse
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Dadditz said:
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Click to expand...
Click to collapse
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
fr4nk32 said:
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
Click to expand...
Click to collapse
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Dadditz said:
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Click to expand...
Click to collapse
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
fr4nk32 said:
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
Click to expand...
Click to collapse
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Dadditz said:
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Click to expand...
Click to collapse
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
fr4nk32 said:
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
Click to expand...
Click to collapse
Ok i'm glad to see that worked..
I wish to thank in a special way Firmware Finder TEAM that with their
programs gave us the chance to solve many problems, THX guys. :good:
See you
Hi, this is my first post here so Hello everyone!
I tried to root P9 lite using below steps:
1. Get unlock code from DC-unlocker.
2. "fastboot oem unlock XXXXXXX..."
3. Phone was reset to factory default sow raw Android 7 was installed.
4. "fastboot boot twrp-3.1.1-0-eva.img" was not working (unknown or forbidden command, don't remember exact message)
5. fastboot flash recovery twrp-3.1.1-0-eva.img
6. After restart with recovery mode still Marshmallow recovery was running so I assumed flash failed.
7. I tried several time put other versions (twrp-3.0.2-0-eva and twrp-3.1.0-0-eva) but if I remember well last one was again installing twrp-3.1.1-0-eva again.
8. As that didn't helped I decided to give up and restore phone to previous state so locked bootloader using SRKToolHuawei-STABLE-V1.3-20160619
9. System restarted and restored to factory default and after running I saw message informing that password is needed to unlock mass storage (or mass memory). There was no onscreen keyboard so no possibility to type anything.
10. Restarted in recovery mode (volume up + power) and tried to recover system from Marshmallow recovery option (using WiFi) but it didn't helped.
11. During next restart I accidentally hold both volume up, down with power so phone tried probably to install system from SSD, but as there was no UPDATE.APP it just stopped at 5%. I left it as it is and after some time (around 5min) phone restarted.
12. Now after restart I see only info that "Your device is booting now...". All key combinations are causing phone restart and same message.
Please advise if there is anything what I can do now.
Will appreciate any help.
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
JimiLincoln said:
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
Click to expand...
Click to collapse
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Thank you Dadditz for your reply.
Dadditz said:
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
Click to expand...
Click to collapse
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
Dadditz said:
Hello,
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Click to expand...
Click to collapse
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
JimiLincoln said:
Thank you Dadditz for your reply.
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
Click to expand...
Click to collapse
I don't think firmware can be checked now...
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Anyhow you may try a factory reset first and let's hope it will restore the device.
Boot your phone with vol+and power till the e-recovery appear,
do the reset and report back how it went.
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Dadditz said:
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Click to expand...
Click to collapse
VNS-L21C22B383
Dadditz said:
Anyhow you may try a factory reset first and let's hope it will restore the device.
Click to expand...
Click to collapse
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Dadditz said:
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
Click to expand...
Click to collapse
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Dadditz said:
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Click to expand...
Click to collapse
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
JimiLincoln said:
VNS-L21C22B383
Click to expand...
Click to collapse
This is a good new !!
JimiLincoln said:
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
Click to expand...
Click to collapse
Also a good new !!
JimiLincoln said:
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Click to expand...
Click to collapse
Yes, surely.
JimiLincoln said:
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Click to expand...
Click to collapse
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
JimiLincoln said:
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
Click to expand...
Click to collapse
I agree too, it happen when process aren't properly followed...
JimiLincoln said:
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
Click to expand...
Click to collapse
Dude,
system can be fully recovered, especially now you're sure about
your latest firmware...
There was a thread with a list of stock apps, but it's been closed
because links are dead...
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Dadditz said:
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
Click to expand...
Click to collapse
Thanks for that info. I will try it in a while when my wife will have new phone.
Dadditz said:
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
Click to expand...
Click to collapse
Done
Dadditz said:
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
Click to expand...
Click to collapse
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top (each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Dadditz said:
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Click to expand...
Click to collapse
Many thanks for your help so far! Really appreciate that.
JimiLincoln said:
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top
(each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Many thanks for your help so far! Really appreciate that.
Click to expand...
Click to collapse
Dude, sorry if i wrote this.
I'm pretty sure you done everything correct,
but before attempt using the TWRP it's better if you
try again using Firmware Finder this way...
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf;
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Dadditz said:
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
Click to expand...
Click to collapse
Done
Dadditz said:
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
Click to expand...
Click to collapse
No such option in my Phone. It looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
Dadditz said:
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Click to expand...
Click to collapse
I wish I could do that
JimiLincoln said:
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Done
No such option in my firmware finder
ibb.co/DYkBGVH
ibb.co/rsNTvdb
so i tried to proceed without checking.
Done
No such option in my Phone. It looks like this
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
I wish I could do that :
Click to expand...
Click to collapse
Thank you for all your feedbacks dude.
Yep, it's clear the firmware is completely f***ed...
Tomorrow i will tell you how to use TWRP
and completely restore the device.
@JimiLincoln
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
but if I can afford, if it were you
i would install the European non-brand version (C432),
without bloatware and should also have the most updated security patch.
Is the phone single or dual sim?
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Hello @Dadditz,
Dadditz said:
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
Click to expand...
Click to collapse
It is branded by Polkomtel (plus.pl).
Dadditz said:
but if I can afford, if it were you
i would install the European non-brand version (C432),
Click to expand...
Click to collapse
European non-brand version would be the best.
Dadditz said:
Is the phone single or dual sim?
Click to expand...
Click to collapse
Dual (hybrid)
Dadditz said:
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Click to expand...
Click to collapse
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
JimiLincoln said:
Hello @Dadditz,
It is branded by Polkomtel (plus.pl).
European non-brand version would be the best.
Dual (hybrid)
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
Click to expand...
Click to collapse
You must use a twrp to rebrand your phone.
Download and flash the one i suggested you (3.1.1-1 by HassanMirza01)
When you done, come back for the files and the guide...
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
JimiLincoln said:
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
Click to expand...
Click to collapse
Yes, normal, you have both
stock and custom recovery now...
Ok, i will post a list of file you have to download:
1 - HuRUpdater04.zip file (will do the job);
2 - L21C432OEMinfo.zip file (dual sim);
THE FIRMWARE:
3 - update.zip ;
4 - update_data_full_public.zip ;
5 - update_full_VNS-L21_hw_eu.zip ;
Let file 3 the same name, rename file 4 from
update_data_full_public TO update_data_public,
rename file 5 from update_full_VNS-L21_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote to you, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L21C432B506.
Copy files 3-4-5 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L21C432B506 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
JimiLincoln said:
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
Click to expand...
Click to collapse
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
help
i have a similar problem BUT i can't restart my p9 lite in recovery mode. I tried vol+ & power; vol - & power; vol +, vol - & pwer; only power. The result is always the same: "your device as been unlocked and can't be trusted....... Your device is booting now....". I try also to wait to descharge battery. After descharging, when i connect usb cable to recharge, the smartphone wake on with the same message..... Someone can help me?
Dadditz said:
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
Click to expand...
Click to collapse
Hello Dadditz,
thank you for your warm words.
I can only comment that still being polite is much easier than spending your private time on helping stranger
Also thanks for warning about locking bootloader by fastboot.