Related
In the setting of "telephone"is the opportunity to set the device to automatic answering after 1-15 rings. That would be ideal when you are having a BT headset, because you would not have to press on the headset button. However, this does not work. Is there a setting in the registry to make this work?
press the green phone button then go into tools>options
then click on the more tab and youll see Automatic pickup
if not on your wm2003 then get a registry editor and go to:
HKEY_CURRENT_USER>ControlPanel>AutoPickup
change the Auto Pickups value from 0 to 1
and Ring to what ever you want (mines set to 3)
hope this helps u
gaz
Thanks for your advice. I already performed the actions and in the registry it is all set. However, on my XDA II it does'nt work. I also tried to use the wired headset, because I know from my regular phone that there it only works when you have the headset attached, but nothing , nada.
Any other suggestion?
aint got a clue then mate sorry
As far as I know this option has never worked, its a OS bug.....
It didn't work on my XDA with 2002 and 2003, and it doesn't work on my MDA II with the latest MDA update. Maybe somebody has worked out this thing, in that case I would be very happy to hear about it because I agree, it's a shame we cannot use it.
It seems that an auto pickup is possible ONLY if the wired earphones are plugged in. So maybe it's possible to simulate such situation with some kind of software, or registry changes, but without swiching off the phone speaker and microphone?
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
I am successfully using the Tornado A2DP hack on my Prophet in conjunction with my bluetooth enabled car stereo. I have written a mort script to make the two connect automatically when bluetooth is switched on but there are odd occassions when they disconnect, like if I switch to listen to the radio.
I can't find the registry setting that controls the state of the "set as wireless stereo" function to either 1 for on or 0 for off. Can anybody help?
My intention is for the script to re-connect the wireless stereo if it detects that the registry setting has changed to 0.
I have been busy trying to track down the issues I have been having on my apache with a2dp, try searchnig the registry for "stereo", you should get a few hits.
Otherwise try
HKLM\Software\Microsoft\Bluetooth\Device\[your devices mac address]\services\
There should be a few long strings (folders), most likely corresponding to one for "wireless stereo" and one for "handsfree", in one of those you may see the wireless stereo...
anyway thats what I got with a 3.5aku and moto headset.
shiggs,
I've already tried that path and it does have a "services" folder with Wireless Stereo and Hands Free folder but the Dword value is enabled (set to 1) in both permanently, evenwhen bluetooth is switched off.
If we can figure this out it would be beneficial for everyone with a wireless stereo device for automatic connection.
Surely someone must know what registry changes take effect once "set as wireless stereo" has been tapped?
neomagik said:
Surely someone must know what registry changes take effect once "set as wireless stereo" has been tapped?
Click to expand...
Click to collapse
use a little utility called ssnap to take a snapshot of registry before enabling that option and another snapshot after checking it. Then compare the two file with an hexeditor (for example) and see which key/value was changed/added
cheers
For those frustrated by the lack of phone support for rSAP car phone kits from anyone other than Nokia. I have managed to get my SE Xperia X1 working with my VW Toureg, suspect it should work with Merc Benz, but you'll need to try it.
I downloaded Helmi's BTSAPSettings Cab from http://forum.xda-developers.com/showthread.php?t=273857&page=17 posting #166 and installed it. Works great connects to car, doesn't drop, quality great.
Only problem I have is that the car kit only sees the sim contacts to copy across and not my outlook contacts. I believe this is because it sees the phone as a Pocket PC and not a Phone/SmartPhone. Anyone have any ideas on how to fix? Any regedits needed?
Thanks
X1, SAP and Nokia 616
Hi!
i also installed Helmi's BTSAPSettings Cab and the X1 now shows SAP in bluetooth profiles.
But my Nokia 616 connects only as handsfree and not in sim acess mode.
Any ideas?
Thanks!
Greetings, Luggi
no working on my touareg
hi
I installed the file on my x1, and teh sap is visible in the list of bluetooth profile. But when i am in my car, it says that the phone is not comptatible.
Do you have any suggestion?
Thanks
This works
with the x1 and the Nokia 616:
http://forum.xda-developers.com/showthread.php?t=372529
Greetings, Luggi
I have tried installing both files.
SAP works, the car finds the phone, asks for the code, they pair.
But then, the car keeps saying "connecting..." the PDA (X1) loses the operator but the car doesn't access the SIM and even says cannot connect.
Any idea??? (The xperia has got the new R2 firmware)
My X1 works out of the box with my Kenwood 8041BT car radio. It shows all my Outlook contacts, i have no items on the sim-card. I have no software separately installed for this, the rom is the one in my signature.
Bluetooth devices identify themselves as a certain thing. Headsets as headsets, phones as phones...interestingly, XDA's identify themselves as PDA's not phones. This can be changed....
Taken from http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
You need a registry editor. If you're not comfortable with editing the registry, don't do it. It can and will mess up your phone if done wrong!
First, you need to change the bluetooth identity to be a phone, or the accessory will not recognise it (funnily enough, bluetooth car kits don't look for pocket PCs). Here's how:
Download PHM RegEdit. Its a free, and simple registry editing program.
Next, edit the following value:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:52020C (hex)
Bear in mind the new dword is a Hex value, so be sure to select "Hexadecimal" from the Base menu.
For reference (in case something messes up), heres the original value (the Pocket PC identifier):
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:1048852 (decimal)
Now, soft reset the phone. If the device is already paired, delete the pairing, and start from scratch. This time it should work as the accessory is seeing the device as a phone, not a PDA. If it doesn't work, you haven't lost anything. The first thing I did with my XDA Stellar was change this and it still happily runs A2DP, file transfer, Activesync etc.
Hope that helps, but play at your own risk.....
Bluetooth devices identify themselves as a certain thing. Headsets as headsets, phones as phones...interestingly, XDA's identify themselves as PDA's not phones. This can be changed....
Taken from http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
You need a registry editor. If you're not comfortable with editing the registry, don't do it. It can and will mess up your phone if done wrong!
First, you need to change the bluetooth identity to be a phone, or the accessory will not recognise it (funnily enough, bluetooth car kits don't look for pocket PCs). Here's how:
Download PHM RegEdit. Its a free, and simple registry editing program.
Next, edit the following value:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:52020C (hex)
Bear in mind the new dword is a Hex value, so be sure to select "Hexadecimal" from the Base menu.
For reference (in case something messes up), heres the original value (the Pocket PC identifier):
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S]
"COD"=dword:1048852 (decimal)
Now, soft reset the phone. If the device is already paired, delete the pairing, and start from scratch. This time it should work as the accessory is seeing the device as a phone, not a PDA. If it doesn't work, you haven't lost anything. The first thing I did with my XDA Stellar was change this and it still happily runs A2DP, file transfer, Activesync etc.
Hope that helps, but play at your own risk.....
Hi,
I have a Diamond 2 with this ROM (1.39.410.1 (49068) PTG) and OFFICE MOBILE WM 6.1.
My PDA is reconnized by Freelander 2 (Phone pairs correctly, calls, phonelist, etc), I can make a call but no sound through the speakers
LandRover says that HTC Diamond 2 have total functionality with Freelander 2.
I've tried to get the HTC Touch Diamond 2 working by:
1. Downloaded Mobile Registry Editor
2. Connected the HTC phone to the computer. I use Vista so it auto connected
3. Launched the MobileRegistryEditor.exe tool from the PC. It automatically looked for the HTC device from step 2
4. Browsed to HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway
5. Added the following DWORD values:
a) ConnectScoInAlways
Value Data = 1
b) MicVolume
Value Data = 8
c) NoHandsFree
Value Data = 0
6. Restarted the device ( I just pulled the battery, left 10 seconds, reinserted and then started up)
7. Paired the device with the Free2.
Nothing... It didn't work for me...
Somebody can help me?
Thanks
i'm no genius when it comes to this stuff, more of an end user...but that whole "just pulling the battery out" thing...there are buttons and programs for that, you know.
also another thing i noticed with my diamond 2 (with stock ROM as well as cooked ROMs) is that once paired, the phone goes to mute. the people i call using my bluetooth headset can hear me, but seeing as the idiot phone muted itself, i can't hear them (a simple fix of pushing Vol + does the trick )
i know it sounds silly, but i didn't think of it straight away...just double check that.
Drag-On said:
also another thing i noticed with my diamond 2 (with stock ROM as well as cooked ROMs) is that once paired, the phone goes to mute. the people i call using my bluetooth headset can hear me, but seeing as the idiot phone muted itself, i can't hear them (a simple fix of pushing Vol + does the trick )
i know it sounds silly, but i didn't think of it straight away...just double check that.
Click to expand...
Click to collapse
Wuem my diamond 2 is paired, the phone don't do mute, and the people can't hear me, only can hear me by the phone...
samoiedo said:
Hi,
I have a Diamond 2 with this ROM (1.39.410.1 (49068) PTG) and OFFICE MOBILE WM 6.1.
My PDA is reconnized by Freelander 2 (Phone pairs correctly, calls, phonelist, etc), I can make a call but no sound through the speakers
LandRover says that HTC Diamond 2 have total functionality with Freelander 2.
I've tried to get the HTC Touch Diamond 2 working by:
1. Downloaded Mobile Registry Editor
2. Connected the HTC phone to the computer. I use Vista so it auto connected
3. Launched the MobileRegistryEditor.exe tool from the PC. It automatically looked for the HTC device from step 2
4. Browsed to HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway
5. Added the following DWORD values:
a) ConnectScoInAlways
Value Data = 1
b) MicVolume
Value Data = 8
c) NoHandsFree
Value Data = 0
6. Restarted the device ( I just pulled the battery, left 10 seconds, reinserted and then started up)
7. Paired the device with the Free2.
Nothing... It didn't work for me...
Somebody can help me?
Thanks
Click to expand...
Click to collapse
No ideas?
Please, help me...