Database Users

Unbrick lenovo a6000 plus (also lenovo a6000 )

Unbrick lenovo a6000 plus (also lenovo a6000 ) :laugh:
most of the people facing the problem : (Bricked lenovo a6000/plus )
Device not showing in adb i'm i right ?
if yes follow the following things smile emoticon
1) install minimal adb and fastboot
2) install lenovo driver
3)install lenovo smart assistent
Now connect your phone to pc/laptop and pen minimal adb (py_cmd ) as administrator smile emoticon
now enter the following command :
adb shell
(now your device will not be listed )
Now enter the following command :
fastboot boot recovery.img
now you get thing like <waiting for device >
NOw remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and now your device is ready to install custom rom smile emoticon try and give feedback if it works
if it works subscribe to my youtube channel youtube.com/user/thevinayvinu

A6000 Brick
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone

FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
PM me

VeerAmrit said:
PM me
Click to expand...
Click to collapse
done

After PM you
you did'nt replay
i need one help me to unbrick my device please

help please

contact arvind balaji ....a member of xda ...he is master in this smartphone he willl help you

FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
You cannot unbrick your phone unless you have a blank flash from Lenovo . Only way to unbrick is to give it to service center ,say nothing about rooting , just say the phone went dead while using .

FaceZone said:
help please
Click to expand...
Click to collapse
You never contacted after that

TWRP available for our device??

if you see that never ? do i see nothing is never i fixed it and i fixed a IMEI Null else so no never

Have you tried this ? to unbrick your device ? link is .txt file
FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!

try this method to unbrick your device !
FaceZone said:
After PM you
you did'nt replay
i need one help me to unbrick my device please
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!

try this method to unbrick your device
FaceZone said:
help please
Click to expand...
Click to collapse
I dont have rights to put links in this post so i have uploaded this file
hope this will work !!!
must try and comment !!

tink2hakk said:
Unbrick lenovo a6000 plus (also lenovo a6000 ) :laugh:
NOw remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and now your device is ready to install custom rom smile emoticon try and give feedback if it works
if it works subscribe to my youtube channel youtube.com/user/thevinayvinu
Click to expand...
Click to collapse
No need of removing battery .
CWM showed up without removing battery.
Except it shows that battery shows 0% LOL

FaceZone said:
After PM you
you did'nt replay
i need one help me to unbrick my device please
Click to expand...
Click to collapse
Do one thing.
Connect charger to see if the phone is alive!
If it charges, then remove the charger and remove the battery.
Again insert the battery and then press vol up + vol down + power button together and that shall boot you into recovery mode.
If the above doesn't works, press vol down + power to boot into fastboot.
Phone will be on bootsplash screen and with borders and a warning named, "pressing the power button will restart phone"!
Connect to pc and flash CWM with command : fastboot flash recovery recovery.img [permanent CWM] or fastboot boot recovery.img [temporary CWM].
Best regards,
Kaustubh

DAMN!!
I have a bricked lenovo a6000 plus and dont know how to fix it. it charges and shows android logo with options namely 'reboot', 'wipe cache partition' etc. What should i do???. it doesnt even goes to reboot mode when i press the volume up and power button!!!

yes! twrp is available
swapnil0706 said:
TWRP available for our device??
Click to expand...
Click to collapse
yes twrp advanced recovery is available for lenovo A6000/plus
i cant share here coz iam junior member in xda
goto mightylenovoa6000andplus.blogspot.com if u want twrp or custom roms

twrp unable to mount data
while trying to flash lollipop through the twrp my phone has got stuck on logo of lollipop.
while in twrp it shows message like E unable to mount data.
plzz some one help me

Bricked Phone Need System.img and Boot.img
Hai guys,
I have a softbricked Lenovo A6000 plus, I have not taken any backup before it has bricked. So inorder to
recover my phone. I need the system.img and boot.img which can be found after you create a backup using twrp or any other Recovery software.So please can any one upload me your LenovoA600 plus's system.img and boot.img. Please help me

please help with Y530Q

after soft the device is dead boot and show
Qualcomm HS-USB Diagnostics 9006 in device manager
how to fix it

kassem109 said:
after soft the device is dead boot and show
Qualcomm HS-USB Diagnostics 9006 in device manager
how to fix it
Click to expand...
Click to collapse
flash it by the flasher

neoandrson said:
flash it by the flasher
Click to expand...
Click to collapse
i flash it but stock in boot loop and i can't find any rom to fix it

Unbrick my ZenFone 2 Laser ZE550KL

Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks

gurung_vishwas1 said:
Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks
Click to expand...
Click to collapse
if your mobile is turning then surely u can enter the fastboot mode, bsc i hav faced it too

Here you have another tutorial: http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Someone said it the comments that you will find rawprogram0.xml patch0.xml and file after you extract them from the ROM.
Here is the stock marshmallow ROM: https://www.asus.com/support/Download/39/1/0/22/ZROQURlyupei1ZQz/32/

The same happens to me, trying to unlock the bootloader phone. I've sended my phone to warranty and they opened the phone to fix
Sorry for bad english
Good luck
gurung_vishwas1 said:
Hi All,
I need help to bring back my Asus Zenfone 2 Laser ze550kl from dead condition, I can't enter fastboot mode to flash any ROM also. Device manager only shows "Qualcomm HS-USB QDLoader 9008 (COM3)" under Ports section. After searching online, I found a link to recover it, but it needs certain files which I could not find in web. The files required are:
rawprogram0.xml
patch0.xml
for ze550kl. I have installed QPST 2.7 Qualcomm tool, and additinally need the complete EMMC image.
https://devlakiutak.wordpress.com/2013/08/10/fixdeadboot/
Can someone please help ?
Thanks
Click to expand...
Click to collapse

colonho said:
The same happens to me, trying to unlock the bootloader phone. I've sended my phone to warranty and they opened the phone to fix
Sorry for bad english
Good luck
Click to expand...
Click to collapse
Thanks for reply. I think that is the last option which I have now. I was trying to correct it myself, but can't unless I have at least FASTBOOT working.

Fastboot erase config....
After that I stucked at boot logo
Used xfstk then aft but stucked at boot used fastboot commands for flashing system all gonna smooth but stucked at boot...
Used recovery to sideload marshmallow ... succeed. But also stucked at boot ..unlock boot loader flash TWRP flashing custom rom also stucked at boot logo... PLZZ help me guyzzz
And it shows error in TWRP
Unable:to mount Config(invalid argument)

Help unbrick Lenovo Yoga Tab 3 Plus (YT-X703F)

G'day,
Does anyone know how to revive a Lenovo Yoga Tab 3 Plus that no longer bootable?
Situation is this:
* Tablet crashed when bootloader was locked prior to having re-flashed OEM bootloader.
* Tablet no longer boots up / powers on via power button (no led).
* No longer have access to tablet via USB ADB or fastboot.
* Tablet is only accessible via Qualcomm HS-USB QDLoader 9008 diagnostic port.
* I have tried to flash stock ROM using QFIL, but keep getting Sahara failed downloading flash programmer.
* I have disabled Windows driver verification.
I think if I could unlock the bootloader via the Qualcomm USB port I would then be able to revive the tablet by re-flashing all the partitions.
Thanks in advance
Cheers J

you have to to the jtag
i used to had the same problem after i flashed the L firmware to the F one , but i send it back to the merchant and got new one .

jrf888 said:
G'day,
Does anyone know how to revive a Lenovo Yoga Tab 3 Plus that no longer bootable?
Situation is this:
* Tablet crashed when bootloader was locked prior to having re-flashed OEM bootloader.
* Tablet no longer boots up / powers on via power button (no led).
* No longer have access to tablet via USB ADB or fastboot.
* Tablet is only accessible via Qualcomm HS-USB QDLoader 9008 diagnostic port.
* I have tried to flash stock ROM using QFIL, but keep getting Sahara failed downloading flash programmer.
* I have disabled Windows driver verification.
I think if I could unlock the bootloader via the Qualcomm USB port I would then be able to revive the tablet by re-flashing all the partitions.
Thanks in advance
Cheers J
Click to expand...
Click to collapse
Hello friend. Did you try the Lenovo rescue and smart assistant.?

COOL1 BRICKED QUALCOMM HS-USB Diagnostic 900E

After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you

hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????

So nobody could help?

hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Edit2: for change jui to eui watch this:
https://youtu.be/oPB1izX4Plo
Good luck:good:

Bogdanm997 said:
hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Good luck:good:
Click to expand...
Click to collapse
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:

silentzer14 said:
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:
Click to expand...
Click to collapse
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)

Bogdanm997 said:
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)
Click to expand...
Click to collapse
I have fixed the device but the only problem now is I don't have any signal. Simcards are detected but no Network at ALL, I tried to Fix my IMEI but still the same, do you know how to fix it ?
I also tried to reflash the rom through TWRP still the same -_-

realblackyz said:
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.

I didnt get this problem, I dont know exactly how to fix, but try:
https://youtu.be/9mbNvItVg78
https://youtu.be/8QZF_H_JNpA

silentzer14 said:
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.
Click to expand...
Click to collapse
Unfortunately it isn't working just tried

Try Vol Up + Down + Usb Cable , to get into 9008 Mode.

dwaipayan774 said:
Try Vol Up + Down + Usb Cable , to get into 9008 Mode.
Click to expand...
Click to collapse
USB cable?sorry What's 9008 mode..

bigdoomzoe said:
USB cable?sorry What's 9008 mode..
Click to expand...
Click to collapse
Qualcomm HS- Usb 9008 mode .
Press vol up and down and plug in the usb cable while connected to PC.

What program is needed for the computer

bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
QFIL or HQXA

This will unlock my network

I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:

Boulfalxd said:
I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:
Click to expand...
Click to collapse
Try QGDP. On my Pc my phone is not detected by YGDP ,but I can flash stock ROM with QGDP.You can flash with QGDP , without even turning on the phone.Add the CPB file in QGDP, click start, and then plug in phone while switched off(no need to press any button)

Man you're my hero ;b

Boulfalxd said:
Man you're my hero ;b
Click to expand...
Click to collapse
If you were able to flash Stock ROM,then Congratulations.