Database Users

Replacing JUST the N4 back glass on the battery door?

Is it possible to JUST replace the back glass on the battery door? Has anyone attempted this? Ive looked and seen that the whole part (glass and door) is around 60 dollars which is kinda pricey and just the glass is around 20 which is alot better in my book so I was wondering if it is at all possible? Thanks for any info!

Nocturnal86 said:
Is it possible to JUST replace the back glass on the battery door? Has anyone attempted this? Ive looked and seen that the whole part (glass and door) is around 60 dollars which is kinda pricey and just the glass is around 20 which is alot better in my book so I was wondering if it is at all possible? Thanks for any info!
Click to expand...
Click to collapse
Yes its possible, you just have to be careful with the NFC and inductive charging coils

lopezk38 said:
Yes its possible, you just have to be careful with the NFC and inductive charging coils
Click to expand...
Click to collapse
Thanks thats good to know. Is there a guide or anything that shows how and where to be careful and whats the best way to remove the glass from the back?

Nocturnal86 said:
Thanks thats good to know. Is there a guide or anything that shows how and where to be careful and whats the best way to remove the glass from the back?
Click to expand...
Click to collapse
Not to be jerk but it's not rocket science. There is no best way to open it. There's only one way to do it. Just take off the back case and replace it with the new one and that's it. don't worry about the stuff inside the back cover. It's glued tight.
Here's a video.
http://www.youtube.com/watch?v=AZDAIgwbXk4
Sent from my Nexus 4 using Tapatalk 2

scream4cheese said:
Not to be jerk but it's not rocket science. There is no best way to open it. There's only one way to do it. Just take off the back case and replace it with the new one and that's it. don't worry about the stuff inside the back cover. It's glued tight.
Here's a video.
http://www.youtube.com/watch?v=AZDAIgwbXk4
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks but I emphasized JUST the glass cause thats what I want to do JUST the glass not the entire back cause its potentially cheaper to go that way not the entire back which I know is easier to do but it costs more. I havent seen anyone actually replace JUST the glass which is what I was asking about. Idk if its glued to just plastic and i can break it apart and pry it off then clean and re-glue or stick, or if the nfc and wcharging contacts are glued to the glass in some way or what, thats where I want to be careful

it is possible. the best bet is to go ahead and remove all the glass pieces and that will determine which part to order. be carefule because the nfc and wireless charger are glued directly to the glass so if you rip the nfc or wireless charger you need to buy the whole thing. there is a foil attached to the inside of the back that is extremely easy to rip. mine was shattered into a lot of tiny pieces so it took a long time to remove all of the glass. so now i can just buy the glass instead of the whole back cover. it is a pain but it can be done.

justin g. said:
it is possible. the best bet is to go ahead and remove all the glass pieces and that will determine which part to order. be carefule because the nfc and wireless charger are glued directly to the glass so if you rip the nfc or wireless charger you need to buy the whole thing. there is a foil attached to the inside of the back that is extremely easy to rip. mine was shattered into a lot of tiny pieces so it took a long time to remove all of the glass. so now i can just buy the glass instead of the whole back cover. it is a pain but it can be done.
Click to expand...
Click to collapse
ok interesting i thought it may be like you described. My back isnt completly shattered just by the speaker grill and then its spread out in large cracks so its not a terrible shatter. Do you think it would be easier to remove the glass since it isnt completely shattered? And should I use heat to soften the glue and lessen the chance it rips off the nfc sticker? And would you happen to have pics or know of pics of what it looks like under the glass or with the glass removed? Thanks for your help and info!

I can pull the back off mine later and get a pic. But I'll have to wait until I get off work.

Nocturnal86 said:
ok interesting i thought it may be like you described. My back isnt completly shattered just by the speaker grill and then its spread out in large cracks so its not a terrible shatter. Do you think it would be easier to remove the glass since it isnt completely shattered? And should I use heat to soften the glue and lessen the chance it rips off the nfc sticker? And would you happen to have pics or know of pics of what it looks like under the glass or with the glass removed? Thanks for your help and info!
Click to expand...
Click to collapse
heres some pics. i outlined the foil so you can see where its at. i have a wide peice of clear tape where the glass was at to hold the wireless charger in until i get a new glass. heat definitely helps to soften the glue.

justin g. said:
heres some pics. i outlined the foil so you can see where its at. i have a wide peice of clear tape where the glass was at to hold the wireless charger in until i get a new glass. heat definitely helps to soften the glue.
Click to expand...
Click to collapse
Oh wow thanks man! Looks like there's a few gaps for the glass and the nfc charging coil is loose without the glass. Interesting. I wonder how it will look on the inside after the new piece of glass is placed like messy or as clean as the original look. Do you know what should be used to stick the new glass? I'm still debating if I should do this lol
Sent from my Nexus 4 using xda app-developers app

Im not real sure what to use either but I'd say to use some epoxy of some sort. I don't know if it would eat away at the paint on the back side of the glass or not. So I'd test it on something besides your phone first. I don't think two side tape would stay very well.

Samsung Galaxy S3 I9300 - Extra Screen Replacement Information

My Ex droped her Phone and it had Spider Webs all accross. Her Provider send it in to see what it would cost to fix. The Phone also would stop working correctly in the middle of calls.
It turns out buying a new one would have come cheaper atleast thats what came back as a answear.
So I decided to bite the apple and try replacing the Screen myself. My Ex was not happy because she thought with the second Problem it is not worth the effort to fix the Screen and maybe loose everything. My reasoning was that when the Spider Web Screen touches the Digitizer it will react strangely. So I went ahead and searched the web on how to do it. I ordered a Screen for $9 on ebay (free shipping) which came with a couple of Tools. More on those later.
One of the first Problems I found was that all instructions that I found showed the beginning and the end. But in the middle how the phone will look like when the glass is finaly taken off, I was unable to find much Information about it. Also doing it Redneck style without Special liquids and or a heat guns was no where to be found.
I decided to just try it. Disasembly is well documented and easy enough to do on this device. Atleast to the Point where most electronics are removed so that you can apply heat without too much problems. I decided on using a blow dryer to heat up the Display. I layed the Blow Dryer on the Counter turned it on and Held the phone up to it. Thinking if my fingers get too hot chances are it is too hot for the Display too.. Might be a little incaccurate to read the temperature like that but hey it worked. But soon after I started to remove the first pieces of broken glass I ran into Problems.
As per instructions I found, I put a Piece of tape accros the Screen so that the individuall pieces stayed ogether. That did not work at all for me. It just made the individual pieces push against the valuable digitizer below it. My next Problem was that the Tools that came with the replacement glass, especially the Little plastic Tools did not hold up to the Job und the tip was soon useless. I had to Switch to a Raizor blade. A couple of times I sliped and hit the Digitizer. Thinking oh well I guess I Need to get a new one. Luckely on the end it all worked out much better then I would have hoped. The left over glue I rubbed mostly off with my finger which worked out nicely. To clean it completely from ist glue took some time. The black rubber allong the side of the phone allso suffered. You might want to look out that that does not get riped out completely. I had enough left over so that the glass would sit on it good enough luckely.
Take a look at these Pictures and remember it works perfectly again for $9. While it is not for everyone to seperate a Glass from a Digitizer it is acctualy less fragile as you might think. The third Picture Shows you how it looked with all the scuff marks from taking off the glass. You can still see a few little marks on the end but hard to notice and much better then before. I am sure next time I will be more carefull and use the blade from the beginning on.
I got more Pictures and will improve this Thread for others that have to go through it. Feel free to PM me if you have any Questions. A list of other resources will also be included. This is only to explain and Show the bare state.

Reserved for links
Additional Screen Replacement Links:

Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk

supreethms said:
Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You should be able to find a new Frame for a resonable Price. Now to remove the digitizer from the Frame that is another Story. Not sure if it was the Glue or what Held it in place but I could not figure out how to get that out. luckely the two Buttons at the bottom survived the Screen removal and so I did not hat to take the Digitizer out.

Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk

http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.

boomboomer said:
Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
It is definetly cheaper then the original but if you have done it once. Chances are You will be able to do it again much easier. So if the $9 Glass only holds for example a Year. You can just replace it again. Or spend a little more for a original replacement glass.
Now I should Point out if the rubber seal around it gets damaged in the process and if the 3M Tape that should come with the Screen is placed wrong it will Impact the sensitivity of the sreen touches. I guess I did it right because my Ex is happy how it performs and that is saying allot.

madmackem said:
http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.
Click to expand...
Click to collapse
If you get down to removing the digitizer from the Frame take a couple of Pictures and post them here.

[Q] replacing only the glass (without the digitizer)

how difficult is it to replace it?
I'm thinking about doing that but read many comments about cracking the digitizer...
so , should I try it or should I just give up and live with that little crack?

rotman253 said:
how difficult is it to replace it?
I'm thinking about doing that but read many comments about cracking the digitizer...
so , should I try it or should I just give up and live with that little crack?
Click to expand...
Click to collapse
It's not just the hazard of breaking the digitizer...the result would not be that same as before. Initially the gorilla glass is glued together with the digitizer and the replacement is most probably a cheap plastic, that cannot have the same feeling nor the same response

aris_p said:
It's not just the hazard of breaking the digitizer...the result would not be that same as before. Initially the gorilla glass is glued together with the digitizer and the replacement is most probably a cheap plastic, that cannot have the same feeling nor the same response
Click to expand...
Click to collapse
I believe I bought an original replacement from UK ...
question is how complicated is this procedure and if by hitting the device screen so much I can harm the digitizer or some other internal parts...

It's difficult to do it without proper tools. Putting the new screen on the digitizer is also difficult.
But if you have experience in these kind of thing, then you can do it.

Lennyz1988 said:
It's difficult to do it without proper tools. Putting the new screen on the digitizer is also difficult.
But if you have experience in these kind of thing, then you can do it.
Click to expand...
Click to collapse
what tools are those?
got a heat gun and plastic spudgers ... it came as a kit with the glass I bought

A UV light to set the glue is best. Makes it more responsive.

rotman253 said:
I believe I bought an original replacement from UK ...
question is how complicated is this procedure and if by hitting the device screen so much I can harm the digitizer or some other internal parts...
Click to expand...
Click to collapse
There isn't any genuine glass replacement as I was informed by Samsung Greece. Officially they only replace the glass WITH the digitizer.
readyfordeals said:
A UV light to set the glue is best. Makes it more responsive.
Click to expand...
Click to collapse
There are some people that they use this glue (without it, the responsivness after some time is decreased a lot ) but the problem is that they use too much and at the points that the UV light hasn't reached it is still liquid and can go everywhere

[Q] Dust under new glass replacement, how can I remove it?

Just got a few weeks ago my I9505 from a repair centre.. I cracked it's glass and got a replacement for around $40.
I can clearly see a lot of dust under the glass, above home button. I think it also penetrated below back button.
The touch works fine in the rest of the screen, only in the parties mentioned above it doesn't, works hard sometimes.:crying:
My question is: Can I remove the dust without cracking the glass? I don't want to buy a new one..
I heard that you can heat it with a hair dryer and pick just the glass up without cracking with metal tweezers..

crystybz2010 said:
Just got a few weeks ago my I9505 from a repair centre.. I cracked it's glass and got a replacement for around $40.
I can clearly see a lot of dust under the glass, above home button. I think it also penetrated below back button.
The touch works fine in the rest of the screen, only in the parties mentioned above it doesn't, works hard sometimes.:crying:
My question is: Can I remove the dust without cracking the glass? I don't want to buy a new one..
I heard that you can heat it with a hair dryer and pick just the glass up without cracking with metal tweezers..
Click to expand...
Click to collapse
Well i suppose you didn't go to the official service of samsung because if you have gone, your service would cost 160$. So it's a second man job. You can go and tell him to restick the glass only or you can search on YouTube for a tutorial to do it by yourself... I prefer the second one. I don't trust anyone, only me!

Cpsil said:
Well i suppose you didn't go to the official service of samsung because if you have gone, your service would cost 160$. So it's a second man job. You can go and tell him to restick the glass only or you can search on YouTube for a tutorial to do it by yourself... I prefer the second one. I don't trust anyone, only me!
Click to expand...
Click to collapse
Thank you for the fast reply.. I don't have stick, I also don't know what kind of stick I need but .. Can I heat it with the hair dryer just where is dust and remove dust with a vaccuum cleaner or something?

crystybz2010 said:
Thank you for the fast reply.. I don't have stick, I also don't know what kind of stick I need but .. Can I heat it with the hair dryer just where is dust and remove dust with a vaccuum cleaner or something?
Click to expand...
Click to collapse
At first you have to go o your service guy to mention your problem. After that,
if he won't do anything, you should buy a 2 mm double sized tape from eBay. But you must be very careful. The guy who changed your screen isn't the certified one huh?

Oneplus Two Screen replacement

I broke my OPT screen when I dropped the phone. I ordered a replacement screen on ebay and disassembled the OPT using videos I found on the internet. The OPT was relatively easy to take apart.
The replacement screen arrived. When trying to place the replacement screen into the frame, I noticed that it lacks the glue on the edge of the screen to attach to the frame.
Any ideas on how I can attach the replacement screen on to the frame? Is there any glue that I can buy? Or will regular glue like super glue(permanent glue) work? Just don't want to risk damaging the replacement screen.
Any ideas?

vishnumrao said:
I broke my OPT screen when I dropped the phone. I ordered a replacement screen on ebay and disassembled the OPT using videos I found on the internet. The OPT was relatively easy to take apart.
The replacement screen arrived. When trying to place the replacement screen into the frame, I noticed that it lacks the glue on the edge of the screen to attach to the frame.
Any ideas on how I can attach the replacement screen on to the frame? Is there any glue that I can buy? Or will regular glue like super glue(permanent glue) work? Just don't want to risk damaging the replacement screen.
Any ideas?
Click to expand...
Click to collapse
Dont use glu you should be able to find adhesive strips on eBay or somewhere online

ki11aprime said:
Dont use glu you should be able to find adhesive strips on eBay or somewhere online
Click to expand...
Click to collapse
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu

vishnumrao said:
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu
Click to expand...
Click to collapse
Never use superglue.
Sent from my ONE A2003 using Tapatalk

vishnumrao said:
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu
Click to expand...
Click to collapse
I'm sure what kind to look for but they are all over eBay and for superglu I'm not sure what will happen but I'm sure there a reason why they don't use it in the first place

Hello all, I went to a local store that repairs phones. I asked to if they would sell double sided tape and offered to pay a nominal fee. They were kind enough to give me a few and at no charge. With this I have put back my phone in working order.

In how much did you got your replacement screen???, I also broke my opt, it's easy
In how much did you got your replacement screen???, I also broke my opt, it's easy to replace glass??? I have seen videos on YouTube

drpratik97 said:
In how much did you got your replacement screen???, I also broke my opt, it's easy to replace glass??? I have seen videos on YouTube
Click to expand...
Click to collapse
Sorry, have not been on xda in a while. I paid about 25 USD on ebay.
Its pretty easy to replace. Takes a lot of patience.

Since the thread has been revived already, I'll drop in my $0.05 since I just replaced my screen last week
* The assembly/disassembly is fairly easy following video tutorials, it's not even necessary to remove all parts if you're careful with the heat.
* Remember to move the fingerprint sensor, the glued-on touch buttons and the phone speaker cover on top to the new screen.
* As always, you need to be patient when heating and ungluing the old screen from the frame (luckily it's glued only on the borders).
* I got my screen from aliexpress just under $20. Couldn't find any difference between it and the original one.
* As previous posters said, do not use any cyanoacrylate glues (superglue, etc), they leave white stains on the glass.
* I was also surprised by no glue on the frame I didn't have time to order adhesive strips, used a really thin layer of silicone adhesive, worked well and there are no gluing signs.

quezak said:
Since the thread has been revived already, I'll drop in my $0.05 since I just replaced my screen last week
* The assembly/disassembly is fairly easy following video tutorials, it's not even necessary to remove all parts if you're careful with the heat.
* Remember to move the fingerprint sensor, the glued-on touch buttons and the phone speaker cover on top to the new screen.
* As always, you need to be patient when heating and ungluing the old screen from the frame (luckily it's glued only on the borders).
* I got my screen from aliexpress just under $20. Couldn't find any difference between it and the original one.
* As previous posters said, do not use any cyanoacrylate glues (superglue, etc), they leave white stains on the glass.
* I was also surprised by no glue on the frame I didn't have time to order adhesive strips, used a really thin layer of silicone adhesive, worked well and there are no gluing signs.
Click to expand...
Click to collapse
are you talking about whole screen or just outer glass?

chxei said:
are you talking about whole screen or just outer glass?
Click to expand...
Click to collapse
Glass with the LCD. I think replacing only the glass would be very hard, if even possible without proffessional tools.

quezak said:
Glass with the LCD. I think replacing only the glass would be very hard, if even possible without proffessional tools.
Click to expand...
Click to collapse
so that lcd is as good as original one? can you link me?

chxei said:
so that lcd is as good as original one? can you link me?
Click to expand...
Click to collapse
It certainly looks the same, both internally and running on the phone, compared to my gf's OP2 which still has the original screen.
I bought this one, but I guess all the aliexpress screens are the same

I dropped my phone too sadly. Contacted the local repair centre and they said I do need to replace outer screen and the digitizer. And the process is more than $100 if I convert it.
In Alixpress just about $5 for the outer screen. Do I need to replace both or just the outer screen?

thehackersz said:
I dropped my phone too sadly. Contacted the local repair centre and they said I do need to replace outer screen and the digitizer. And the process is more than $100 if I convert it.
In Alixpress just about $5 for the outer screen. Do I need to replace both or just the outer screen?
Click to expand...
Click to collapse
I don't think changing just the glass is a good idea, I think there was video of a guy trying and braking everything. Just like the guy before said buy a screen for $20 and follow a guide. I also broke mine, but ordered a screen + frame for $50 because I thought it would be easier to just move the hardware.

https://www.ebay.com/itm/Double-Sid...642287?hash=item3aeaef1d2f:g:HsIAAOSwEBxZbHWp
Adhesive for screen. I've changed my screen twice.. Mr. Sloppy hands -.-