Help!!!!! Don't know what is happening with my device
I am not able to open camera...and when I installed third party camera app camera fv-5 it says "error opening camera driver a device restart might be required"----restarted a hundred times
Flashlight also not working ...the shortcut has gone dark
No response
I just ran into a bootloop while trying something else...then I clean installed my backup I had with twrp.....installed elementalX kernel ....supersu and nothing else has been done...what is causing this ?? Pls help....
If it's a kernel related issue pls tell me how to resolve it
I have added a line to enable hal3 in build prop before doing backup and the actual twrp backup has this modified build prop...even after removing that nothing seems to happen...
Pls pls help
sethukrishnan said:
Help!!!!! Don't know what is happening with my device... Pls pls help
Click to expand...
Click to collapse
Factory reset or flash full stock image using flash-all.bat
Resolved
sethukrishnan said:
Resolved
Click to expand...
Click to collapse
how have you solved?
Johnny_Queste said:
how have you solved?
Click to expand...
Click to collapse
I reflashed full ROM and vendor, with flash all.bat
Related
Hey guys.I'm new here as a member,but I check it every day.
Last week I entered in my Galaxy S camera secret menu and pressed firmware update.after that I rebooted my phone and now my camera doesn't work.It shows me a black screen when I enter in the camera application,and every camera app that I install it keeps fc .I reinstalled stock rom from odin and no suucces .
any help plz?
Switiz said:
any help plz?
Click to expand...
Click to collapse
try wipes and factory reset
xsenman said:
try wipes and factory reset
Click to expand...
Click to collapse
already tried that.tried reverting to stock 2.1 firmware,then puted back 2.3.6,and some 4.2 jb roms,but none of them worked.my camera still stays black,like it's not connected,but my front camera works ...
i went to a service and the guys there told me to reinstall the firmware,but that didn't changed anything.i'll but a new camera but i'm afraid will not work and i'm gonna buy it for nothing
Switiz said:
but a new camera but i'm afraid will not work and i'm gonna buy it for nothing
Click to expand...
Click to collapse
yup, just flash the 2.1 and copy paste the camera firmware
hey guys I've a problem with the Airview,it doesn't works perfectly...for example when I'm on lock screen unexpectedly I see the pointer on screen that moves up and down without any reason while I have put my hands over ...or in other supported apps this problem exists.
after I do a wipe cache/dalvik cache it works fine but after a few days the problem comes back again :crying:
Does anyone have this problem? Please help...Mr @AndreiLux @wanam please help
sorry for my bad English speaking...
AvBMO said:
hey guys I've a problem with the Airview,it doesn't works perfectly...for example when I'm on lock screen unexpectedly I see the pointer on screen that moves up and down without any reason while I have put my hands over ...or in other supported apps this problem exists.
after I do a wipe cache/dalvik cache it works fine but after a few days the problem comes back again :crying:
Does anyone have this problem? Please help...Mr @AndreiLux @wanam please help
sorry for my bad English speaking...
Click to expand...
Click to collapse
U can try doing a full reset and check if that helps
I have heard many have problem after OTA update and fixes the issue on reset
123hiten said:
U can try doing a full reset and check if that helps
I have heard many have problem after OTA update and fixes the issue on reset
Click to expand...
Click to collapse
Thank You...I have do this several times but nothing has changed
AvBMO said:
Thank You...I have do this several times but nothing has changed
Click to expand...
Click to collapse
If thats the case flash a stock firmware again using Odin and reset the device after that all should be fine
Note : Do take backup of ur imprt data b4 flashing / Reseting device
123hiten said:
If thats the case flash a stock firmware again using Odin and reset the device after that all should be fine
Note : Do take backup of ur imprt data b4 flashing / Reseting device
Click to expand...
Click to collapse
yes I know this but as I said before it won't help...
After I flashed the factory ROM via fast boot I can't open my camera.
It says can't connect to camera
Rebooting doesn't works
sal_rc said:
After I flashed the factory ROM via fast boot I can't open my camera.
It says can't connect to camera
Rebooting doesn't works
Click to expand...
Click to collapse
Try re flashing the rom. This is most probably caused due to not following the right procedures. If still persists. Try flashing another stock rom package as the earlier may have been corrupt.
Hit thanx if helped.
AVS_rokz said:
Try re flashing the rom. This is most probably caused due to not following the right procedures. If still persists. Try flashing another stock rom package as the earlier may have been corrupt.
Hit thanx if helped.
Click to expand...
Click to collapse
It was because of the custom kernel(despair) I flashed, after flashing the stock kernel it was solved.
Anyways thanks for the reply.
sal_rc said:
It was because of the custom kernel(despair) I flashed, after flashing the stock kernel it was solved.
Anyways thanks for the reply.
Click to expand...
Click to collapse
If you want you can check camera patch fix by xda member RohanAJoshi, here : http://forum.xda-developers.com/yureka/development/fix-camera-fix-custom-kernel-stock-cm11-t3035674
I had the same problem.... When i open camera it shows can't connect to camera... I was on the fresh stock rom ... Now im on fastboot rom... I cannot access back camera.... Front camera works though.... I tried many ROMs.... None of them fixed camera issue..... Anyone please help me....
How i got the issue fixed
I too had the same issue...tried every method online..none seemed to work..later today i removed the outer casing and tried reconnecting the camera module....voila...!!!IT WORKED!!! although i coudnt see the stock camera app shortcut anywhere ( dint wipe cache/dalvik) camera opened on 3rd party app.....!!
Vishnu2694 said:
I too had the same issue...tried every method online..none seemed to work..later today i removed the outer casing and tried reconnecting the camera module....voila...!!!IT WORKED!!! although i coudnt see the stock camera app shortcut anywhere ( dint wipe cache/dalvik) camera opened on 3rd party app.....!!
Click to expand...
Click to collapse
how did you connected that thing can you post some screenshot here
My Home button of the OPT is not giving signs of life. I got the OPT yesterday and it worked but after a clean install it stopped working.
It doesn't do Home Button Taks nor it reads fingerprints. It is simply DEAD! Help me please????
https://www.youtube.com/watch?v=o6ro4YtWwrw
I went through a process of rooting, however I'm still not rooted because no point of rooting if I have this problem.
Here's what happened:
After I unlocked the bootloader and flash TWRP, I went to TWRP and by mistake I wiped system as well. I was so nervous that I ended up wiping: System + Data + Dalvik + Cache + SD Card.
So after I had wiped everything off OPT, of course I had to download and flash manually Oxygen OS ! After I flashed it I set up the phone normally through Setup Wizard and when I was going to configure the Fingerprint, that's when it didn't work anymore. So, everything in the phone is working properly except for the Home Button.
So, do you think it could have anything to do with factory reset + System + SD Card and flashing Oxygen OS again? How could that damage the Home Button ALL functionalities? If not, read the final part of this thread:
The buttons on left and right of the Home Button work properly !
I followed these two Sticky Threads:
---> https://forums.oneplus.net/threads/oneplus-2-stock-rom-collection-updated-01-09.347627/
---> https://forums.oneplus.net/threads/...-custom-recovery-root-efs-backup-more.345478/
I have a theory which might help someone who reads this tell me if it could be it:
So, my OPT came with Oxygen OS 2.0.3 and as I wiped the system, I had to flash a ROM again. However it is only available Oxygen 2.0.2 in the Internet to download, which leads me to think that it was a firmware downgrade which led to this problem. Could this be it?
I am trying to solve this for 17 hours ! Please, if you have any idea how to help me, do not hesitate.
Thanks in advance for all of those who are reading this until the end and even more thanks to the ones replying to this thread !
This could really be due to a driver problem.
They may use different fingerprint readers on several devices.
Have you contacted the Oneplus support yet?
Jann F said:
This could really be due to a driver problem.
They may use different fingerprint readers on several devices.
Have you contacted the Oneplus support yet?
Click to expand...
Click to collapse
I have. But it will take many days, I wish I could fix it asap. So, I guess if it is a driver problem, clean flashing, etc will not do anything ever right?
I have flashed everything from zero serveral times, it just keeps not working
You could search for someone to give you the appropriate files or even a backup of /system
Try the OP forums too.
Jann F said:
You could search for someone to give you the appropriate files or even a backup of /system
Try the OP forums too.
Click to expand...
Click to collapse
I did... The exact same thread as this one lies now on the OP Forums. I guess i'm out of luck.
Same issues as above :| I have a couple backup phones but im still pissed off about this.
We have ruled it down to kernel changes in 2.0.3 vs 2.0.2
i am facing the same problem
my home Button completely gone....
wtf
Backup of /system 2.0.3 posted here
just updated to 2.0.3
same... home bottun STILL not working
basscheck12 said:
Backup of /system 2.0.3 posted here
Click to expand...
Click to collapse
madsatan said:
just updated to 2.0.3
same... home bottun STILL not working
Click to expand...
Click to collapse
If the problem is kernel related, guess you would need a back-up of /boot from 2.0.3 also
basscheck12 said:
If the problem is kernel related, guess you would need a back-up of /boot from 2.0.3 also
Click to expand...
Click to collapse
sorry... so what should i do ?? make a back up and boot it again ??
i updated to 2.0.3 and wipe and boot ...
still not working ....
madsatan said:
sorry... so what should i do ?? make a back up and boot it again ??
i updated to 2.0.3 and wipe and boot ...
still not working ....
Click to expand...
Click to collapse
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.
basscheck12 said:
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.
Click to expand...
Click to collapse
by the way
it happened after i flash cyanogen , then I returned to the oxygen 2.02,
but unfortunately it does not work now the home button , not the fingerprint reader , the ability to use it as a button . I lost some drivers or normal?
someone can help me please?
basscheck12 said:
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.
Click to expand...
Click to collapse
Where can I find this file? When I did the TWRP backup I had boot, system and data partitions selected.
Jeftha said:
Where can I find this file? When I did the TWRP backup I had boot, system and data partitions selected.
Click to expand...
Click to collapse
Oh, I didn't realize you uploaded the entire back-up. Then you have already uploaded the file I was referring to.
having this same issue. home button just stopped working. nandroid back to 2.02 from 2.1 and still doesnt work. if anyone knows a fix please pass along the info
Quizo said:
having this same issue. home button just stopped working. nandroid back to 2.02 from 2.1 and still doesnt work. if anyone knows a fix please pass along the info
Click to expand...
Click to collapse
somehow i deleted all my os and blah blah blah
so i sideload my opt with OxygenOS 2.0 ( OnePlus2Oxygen_14_OTA_002_all_1507251956_wipe.zip)
and i got my home button back ...yay
then flashed the OxygenOS 2.0.2
still have a home button
Facing the same problem. Wasnt flashing one rom over other. Was on hydrogen OS for about 10 days now. Any true solutions to this problem? Does the above solution work?
I've got the same issue starting today. I'm on OxygenOS 2.1.1 with root.
Going back to stock without root to see if it fixes it but I think it's gotta be a hardware issue. Has anyone gone through the RMA process with OnePlus?
After flashing some custom roms and playing around with the phone, and booting to the Android Recovery, I've noticed at the bottom of the window this message;
Supprted API: 3
E:Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
I flashed back Nougat to test the Recovery and there were no messages. So I'm wondering why flashing a custom rom it's messing something up?
Thanks
bump...
Does anyone know anything about this?
Thanks
Try to reflash stock firmware via EDL mode.
darkzero1125 said:
Try to reflash stock firmware via EDL mode.
Click to expand...
Click to collapse
Doing a normal flash of Stock works, if it didn't, I'm assuming I'd see this message in the recovery and I don't.
I only see this message in the recovery on custom roms, not sure if it was all of them I tested, but it seemed like it was, last I remember...
Anyone please?
I can't figure out why this is appearing in the custom roms I flash, but not Stock Oreo.
Thanks
Got same problem :/
beam2546 said:
Got same problem :/
Click to expand...
Click to collapse
I'm not sure it's the way it is when using custom roms or something screwed up...
Hmm
DoR3M3 said:
I'm not sure it's the way it is when using custom roms or something screwed up...
Hmm
Click to expand...
Click to collapse
Will install stock rom solve problem? I don't know now what should I do:crying:
beam2546 said:
Got same problem :/
Click to expand...
Click to collapse
beam2546 said:
Will install stock rom solve problem? I don't know now what should I do:crying:
Click to expand...
Click to collapse
Yes it goes away on Stock, because you are putting back the recovery...
DoR3M3 said:
Yes it goes away on Stock, because you are putting back the recovery...
Click to expand...
Click to collapse
same problem with me. did u resolved it?? could u install custom rom??
nitinlakra said:
same problem with me. did u resolved it?? could u install custom rom??
Click to expand...
Click to collapse
Look at my Signature, I moved on, oops time to unsubscribe from this post...
Cheers