So this is happening on a parents axon 7 mini. I haven't duplicated it on my axon 7 yet. What happens is on certain incoming calls; the displayed number scrolls. So that you have to wait a few secs to see the whole number and decide if you want to answer. It used to just show the whole number and name associated with the contact. Don't know if this started with an update or not. But it only does it on some numbers. When I call it shows my whole name and number with no scrolling at all. But calling from a 800 number it scrolled. I can't find any settings to disable this or if it's even possible. Any body else experiencing this? Or know how to fix it.
Related
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
Hi there,
I needed to change my caller ID settings on my phone, but after I did that, I found that I couldn't dial out. I chose the setting for blocking caller ID to everyone. I then tried out contact only, and found I could only dial my contacts, and finally visible to everyone, and then i could dial out like normal. This is most annoying, as there are people who I don't want to see my number when I call, such as my students. Why would it block me calling in the first two cases - all I want blocked is my number appearing on the other person's phone. Could it have something to do with my local network? Any ideas?
Thanks,
David
PS I was playing about with my contacts while I was testing this out. I noticed my phone slowed down to a crawl, so much so that it was unusable, after changing a contact's details. Anyone else noticed this?
Has nobody experienced this? Or am I being an idiot and not understanding something simple?
Hi all,
I am with Rogers and just upgraded to R2BA020. I notice previously from tapping a contact number contacts, it can dial out directly. But now it is extremely annoying that I tap the contact number, it puts the number into the dialer (screen with dialing pad), then I hit the call to dialout.
Does anybody find the dial from contacts behaviour changed?
Is there a dialer that can completely replace the stock one?
Thanks
i haven't received any updates for my phone yet, but that sounds more hassle to make a call now. maybe this change is for people who complained about accidentally tapping on the number and it calls out when they did not intend to do so. mind as well just tap and hold on the contact's name and select make a call to mobile/home/office
Meh, that doesn't seem too bad, but it is annoying nonetheless. I think if you dial, and put the phone by your ear, it should use the proximity sensor to realize it should start calling.
Android Variations: Check em out!
Yes, i too noticed this ! Funny instead of making the call process easier its now actually longer !
The workaround is to go to ur phonebook & long press the contact to call.
yup, long press can skip the dialpad but it brings up another box to click through before calling....
I have never came across a phonebook with any phone that is 2 clicks before it dials. It is just pure annoying. They got it right the first time, I don't know why SE messed it up now.
yeah, i have a rooted x10a to the 23 firmware, and its taking me to the dailer after i hit my contact's number. this is rather annoying, we gotta find a fix for it!!
Yes I noticed that too. I find it annoying. Is there a work around to this?
I use another dialler called aTAKEphONE, it will dial directly.
There is a trial available at shsh.com
This is a really strange problem and I'm hoping someone can help me with it.
For some reason on my Treo Pro, there is this one specific random phone number which, although I can add it to a new or existing contact and it will show up correctly under that person in the Contacts app, does not seem to be recognized, remembered or associated throughout the rest of the phone.
Meaning, if I get an incoming call from that number it shows up as an unknown caller, displaying the number but no associated contact name. If I check my call log the number shows up there, rather than the contact name. Also in text messages, it just shows as the number by itself, again rather than the contact name to which it belongs. If I tap on that number in the SMS dialog, it tells me "This person is not in your contact list..." and asks me if I want to add them. And whether I add that number to an existing contact or create a new one for it, nothing changes. If I tap the number again, it still tells me it is not in my contact list. Over, and over, and over again. It just will not "stick" or take, permanently.
There is nothing odd about the actual number itself. It's the exact same format as all the other numbers in my contacts (1-416-xxx-xxxx). And I've tried adding the number in every possible way, with and without area code, '+' sign, '1' in front etc.. nothing makes a difference. I've rebooted the phone after adding it, and still no effect. It just will not recognize this phone number as belonging to a contact, even though under the contact it appears correctly, and I can call or text it from the contacts app.
Is there any reason this would be happening, or any way to fix it? Any help is greatly appreciated, thanks...
I have the same frustrating problem on my Treo Pro - contact names do not display even though they are saved to phone memory. The only solution I have found is to delete the contact and create a new one e.g. from the number that appears in call log or SMS. I presume the reason is Sprite Backup doing somethig wrong with the databases when restoring contacts after hard reset.
Just switched my VZW G5 from VZ to ATT (unlocked, non dev)
I'm noticing my synced google contacts don't show up when I get a call.
When I call them, it works, the phone app shows their name and number, but when they call me, I just see the number even though that number is in my contact list.
I have noticed when I call out, the contact number is displayed with the country code ( 1 ) and the 1 isnt there when I get a call. Could that be it?
joebarkho said:
Just switched my VZW G5 from VZ to ATT (unlocked, non dev)
I'm noticing my synced google contacts don't show up when I get a call.
When I call them, it works, the phone app shows their name and number, but when they call me, I just see the number even though that number is in my contact list.
I have noticed when I call out, the contact number is displayed with the country code ( 1 ) and the 1 isnt there when I get a call. Could that be it?
Click to expand...
Click to collapse
I believe that is your problem. I had to change my numbers to 9 digit instead of 6. (area code) 123-4567 if any are not the 9 digit format they only show up as a number with no name.
All my numbers stored have area codes. Another weird issue: when i call people back from the recents tab of the phone app, i get a busy signal or an error for making an international call, when its my area code.. I look at the number dialed and its just the same number with a space between the first and second digit, altering the number.
Bump
Same issues here - Verizon S6 (G920V) on AT&T, ever find a solution?