Caller ID problems - HD2 General

Hi there,
I needed to change my caller ID settings on my phone, but after I did that, I found that I couldn't dial out. I chose the setting for blocking caller ID to everyone. I then tried out contact only, and found I could only dial my contacts, and finally visible to everyone, and then i could dial out like normal. This is most annoying, as there are people who I don't want to see my number when I call, such as my students. Why would it block me calling in the first two cases - all I want blocked is my number appearing on the other person's phone. Could it have something to do with my local network? Any ideas?
Thanks,
David
PS I was playing about with my contacts while I was testing this out. I noticed my phone slowed down to a crawl, so much so that it was unusable, after changing a contact's details. Anyone else noticed this?

Has nobody experienced this? Or am I being an idiot and not understanding something simple?

Related

Per call/contact caller ID settings

Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all

Schedule calls?

Hello everyone!
I'm a fairly new owner of a TMO TP2 and so far really loving the phone. I currently just flashed the TMO official 6.5 upgrade and love it. I'm new to the world of phone modding and still trying to figure out exactly what I want my phone to do for me, lol. One of the things I do know is that I would like the ability to schedule my phone to automatically dial in to calls. Maybe farfetched, not sure, but I have a ton of conference calls I get on on a daily basis. I would love it if my phone could auto dial in to those calls for me in the case that I am driving and can't dial. Also, something small and hoping is fixable, I have contacts that are by company name instead of person's name. For some reason they show up with no name at all in my contact's list. Is there a way to get the phone to recognize to list by company name so that I can find the number alphabetically? And the last thing, is there an easier way to get rid of contact duplicates other than deleting one by one?
Thanks in advance for your help!

Need an app that forward selected calls

Here's my scenario,
I'm receiving calls from 3 people that are annoying, I'm not looking for to block these people, but looking an app that can REDIRECT these SELECTED CALLERS to the number of my CHOOSING.
please help me find an app that forwards calls (THAT DOES NOT TAMPER WITH VOICEMAIL)
Thanx in adv.
I hear that phoneAlarm does this from pocketMax.
http://www.pocketmax.net
just tried it, and did find anything regarding call forwarding.
anyone else????
This won't help with your scenario, but might be useful for future reference.
Google Voice offers this functionality by default. You can send those callers to another number, or straight to voice-mail, or block them entirely if you choose.
Unfortunately, I don't know of any WinMo apps that will do that.
Not sure if MagiCall will help you. You can set up custom rules for each number.
Worked great when I was getting annoying calls.
I normally was using Magi call, but have it under hang up and drop. Problem is that it hangs up a second later (they can still hear my background and notice that it the call is being hanged up for the 1 second).
I have tried about 2-3 apps that they are suppose to block the call, instead it send s them to voice mail (I don't want them to have access to my voice mail) or does hang up immediately. Only if there is a TRUE CALL BLOCKER is would consider it.
I now focusing in finding a app that forwards these selected callers to any number of my choosing.
There has to be an app like this, someone hopefully comes through with that answer.
Extreme184X said:
just tried it, and did find anything regarding call forwarding.
anyone else????
Click to expand...
Click to collapse
I'm looking for the same thing and PhoneAlarm Pro does support this feature from what I've read. I downloaded the Pro version and installed it. But after restart, it will get stuck on the main screen and nothing else will show. I waited for a while to see if it will load but nothing ever happened and I kept restarting over and over. I finally ended up doing a hard reset. I'm running on the Leo Cell Evo v5 rom tmobile and I don't know if it has something to do with it, but I don't feel like flashing to another rom to see if it works for me so I'll just leave it alone and let someone else figure it out.

Dialer behaviour R2BA020

Hi all,
I am with Rogers and just upgraded to R2BA020. I notice previously from tapping a contact number contacts, it can dial out directly. But now it is extremely annoying that I tap the contact number, it puts the number into the dialer (screen with dialing pad), then I hit the call to dialout.
Does anybody find the dial from contacts behaviour changed?
Is there a dialer that can completely replace the stock one?
Thanks
i haven't received any updates for my phone yet, but that sounds more hassle to make a call now. maybe this change is for people who complained about accidentally tapping on the number and it calls out when they did not intend to do so. mind as well just tap and hold on the contact's name and select make a call to mobile/home/office
Meh, that doesn't seem too bad, but it is annoying nonetheless. I think if you dial, and put the phone by your ear, it should use the proximity sensor to realize it should start calling.
Android Variations: Check em out!
Yes, i too noticed this ! Funny instead of making the call process easier its now actually longer !
The workaround is to go to ur phonebook & long press the contact to call.
yup, long press can skip the dialpad but it brings up another box to click through before calling....
I have never came across a phonebook with any phone that is 2 clicks before it dials. It is just pure annoying. They got it right the first time, I don't know why SE messed it up now.
yeah, i have a rooted x10a to the 23 firmware, and its taking me to the dailer after i hit my contact's number. this is rather annoying, we gotta find a fix for it!!
Yes I noticed that too. I find it annoying. Is there a work around to this?
I use another dialler called aTAKEphONE, it will dial directly.
There is a trial available at shsh.com

Incoming caller ID scrolls annoyingly

So this is happening on a parents axon 7 mini. I haven't duplicated it on my axon 7 yet. What happens is on certain incoming calls; the displayed number scrolls. So that you have to wait a few secs to see the whole number and decide if you want to answer. It used to just show the whole number and name associated with the contact. Don't know if this started with an update or not. But it only does it on some numbers. When I call it shows my whole name and number with no scrolling at all. But calling from a 800 number it scrolled. I can't find any settings to disable this or if it's even possible. Any body else experiencing this? Or know how to fix it.

Categories

Resources