Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Flash the stock firmware with ODIN
Envoyé de mon SM-G935F en utilisant Tapatalk
Thanks for the reply,
Sorry but I'm new. How do i do that?
pr0cupid said:
Thanks for the reply,
Sorry but I'm new. How do i do that?
Click to expand...
Click to collapse
What model? Country
Sent from my Blackberry Bold
Model : SM-G935FD
Country : Singapore
frp lock s7 edge
pr0cupid said:
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Click to expand...
Click to collapse
i have same issue here, did you find any solutions ?
AFAIK when you factory reset your phone etc. if rooted you must remember to go back into Developer Options and re enable OEM Unlocking. This depends on the method you used to root, if you flashed dm-verity then you "May not" have this issue but cannot say for sure.
If it is already too late for you then I think you need to flash stock via Odin, plenty of threads out there on where to find the firmware (SamMobile) and how to do it. Even a quick google of the error gave me plenty of results...
One thing I have read is that you may have to keep trying to get your phone into download mode as the timing is much stricter with this error message.
I've the same problem with my g935x blocked on FRP when ii treid to root if any one can help .plz
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
djluisbento said:
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
Click to expand...
Click to collapse
@djluisbento This method seems to be interesting. But would you please clarify more about it. How to install the apk file on official recovery? Or it's enough to have the pendrive connected? And if yes, when this step should take place, after flashing the official ROM or when?
I'm stuck in a boot loop into recovery mode with dm-verity error, and unfortunately I have the FRP locked, so I can't install TWRP to flash the no-dm-verity.zip file to skip it.
Appreciate your suggestions.
I have the same issure. stock firmware wont install either. im just stuck on the FRP screen, cant even get into recovery
Same issue here, please help
Everything was fine with rooting and installing TWRP. after that did a restart/ attempt to goto twrp recovery, from then the s7 edge is stuck at "Custom Binary Blocked By FRP" and doesnt boot. please help!!
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
Only if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
If you only want a bootable system partition or writable data in TWRP:
Download the latest dm-verity and force encryption disabler zip.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Click to expand...
Click to collapse
just quoting from the original thread by jcadduono.
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
maxkento said:
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
just quoting from the original thread by jcadduono.
Click to expand...
Click to collapse
taiseer999 said:
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
Click to expand...
Click to collapse
Yes, flashed both Zips in recovery. I used my regular google account during the initial set up. If i wait for 72 hours, will the phone just boot back online just fine? Still, how do i make sure it wont goto the FRP lock again while trying to reboot or reboot to TWRP?
Solved,
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
anoopgopalpt said:
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
Click to expand...
Click to collapse
Helo
But U did this after 72 hours?
There are several methods depending on firmware version installed on your phone. Basically you have to enter in your phone, launch chrome, install an app which gives you the possibility to log into your google account from chrome and not set-up program.
I used successfully the Bluetooth method. Search for with google. You need a bluetooth headset and follow the steps described on youtube.
BTW. My phone was brand new and I flashed different official samsung firmware ( csc). I had to change google password in between and that resulted in FRP lock....
The wait time is 24 hours as is stated in google docs from site
Sent from my SM-G935F using XDA-Developers mobile app
Hello I have a related problem, opened a new thread, but my thread was closed, because my problem is related to this one, but more complicated. I have the same problem with FRP lock as described here, I can turn on the download mode but it wont be recognized by my computer. I tried different usb cables, drivers, even computers, it wont help. I cant flash it with odin, smartswitch, kies, no matter what I try. If I go to recovery mode it says `dm-verity verification failed...`and if I choose `apply update from ADB or SD card` it says `update from external storage disabled`. I dont know what to do anymore Its a new phone
FRP Block - no Dev Tools enabled
Hey guys,
you're my last resort, I've tried everything I happened to come across, to no avail.
First off, I did something incredibly stupid, don't even ask me why, as I have no idea what the heck drove me to do this in the first place.
Anyways, I was using the stock ROM on my S7 Edge, not tweaked or tinkered with besides the usual CF-Auto_Root. It never caused any trouble whatsoever. But for no reason at all this morning I decided to disable USB debuggin and OEM unlock. A short while later I rebooted my phone, which ended up in "Custom binary blocked by FRP Lock".
I gave a factory reset a try, but that obviously didn't change a thing. So I went to sammobile.com and downloaded the latest official stock ROM for my device and tried flashing it with Odin. Unfortnately Odin always fails with "Complete(Write) operation failed.", which I assume is because I messed with the settings in dev mode.
Next stop: ADB. I've never used that thing before, but I thought I should possibly be able to get it done following a simple guide. Unfortunately ADB won't even list my device when typing "adb devices". It's just an empty list.
So please guys, give me some tipps on how I can bring my phone back to life.
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
As advised flash the stock firmware. DATA won't be affected.
ashyx said:
As advised flash the stock firmware. DATA won't be affected.
Click to expand...
Click to collapse
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
ScottHW said:
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
Click to expand...
Click to collapse
Searching for that question directly, it seems like flashing a ROM (e.g. stock firmware) will not directly erase user data; downloads, photos in DCIM, etc.
But, sounds like any user-installed apps will be erased (so any internally stored data would be lost).
And, data stored in system apps would be lost, too; e.g. tabs that were open in Chrome.
There's no way around the FRP lock, eh?
Here is Samsung's statement about FRP (Factory Reset Protection)
It describes the Google account "protection" features, but doesn't really describe how FRP lock leads to bootloops.
https://www.samsung.com/us/support/frp/
Factory Reset Protection (FRP) Feature
What is Device Protection, or Factory Reset Protection (FRP)?
Android devices provide built-in security features you can use to protect your device and information, including screen locks and data encryption. Data protection, or Factory Reset Protection (FRP), is a security feature on Android devices with Lollipop 5.1 and higher.
FRP is automatically activated when you set up a Google Account on your device. Once FRP is activated, it prevents use of a device after a factory data reset, until you log in using a Google username and password previously set up on the device.
How does FRP work?
When you perform a Factory Data Reset, all settings are returned to the factory default settings. All data is erased, including files and downloaded apps.
If you have a Google Account set up on the device, FRP is active. This means that after the reset, you'll be required to log in to the Google Account using the username and password. If you have multiple Google Accounts set up on the device, you can log in using any of the accounts.
If an unauthorized person tries to reset the device by another method, the device would still require log-in using the Google username and password. This means that if your device is lost or stolen, another person would not be able to reset it and use it.
What do I need to know about FRP?
If you want to reset your device to factory defaults, make sure you know your Google Account and password, because you'll need to log in at the end of the reset.
If you want to reset your device to factory defaults, but don't remember your Google username and/or password, you can do one of these:
Check your devices Account settings for your account name, and reset your password via the device or at www.google.com.
It can take 24 hours for the password reset to sync with all devices registered to the account.
Remove the account before you reset the device.
If you already reset your device, but don't remember your Google username and/or password, the device can't be used. In that case, you can do one of these:
If you know your Google username but can't remember the password, you can reset your password on the device, or at www.google.com. It can take up to 24 hours for a new password to sync with all registered devices. After 24 hours, you can try logging in to your phone with the new password.
If you have multiple Google Accounts, and you can't remember which Google Account you set up on your device, visit https://www.google.com/android/devicemanager.
Log in with your Google username and password and check the list of devices registered to the account. If you don't see the device listed on the account, it means the device is registered to a different account. Use the same process to check for devices linked to your other Google Accounts. When you find the registered account, use it to log in to your device.
If you can't remember any of your Google Account information, you can send your device, along with proof of purchase, to an authorized Samsung Service Center. Samsung has special tools to reset the phone to factory defaults with no protection enabled.
Click to expand...
Click to collapse
Looking for a Samsung Authorized Support Center, apparently there are ZERO listed around Omaha, NE.
http://support-us.samsung.com/cyber/locator/asc_locator.jsp
There must be ASC's somewhere; I'm hesitant to mail the phone away because I think the tech will just wipe it. The whole point is to maintain the data :-/
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
ScottHW said:
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
Click to expand...
Click to collapse
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
ashyx said:
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
Click to expand...
Click to collapse
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
ScottHW said:
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
Click to expand...
Click to collapse
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
ScottHW said:
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
Click to expand...
Click to collapse
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
n00b mistake
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Sh!t, sorry, boot.ing /= bootloader. Rookie mistake. #StillLearning
OK, so boot.img and recovery.img should both be contained within the AP component of stock firmware.
I can just flash those two, can't I?
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Is there any non-GUI way to toggle the OEM UNLOCK?
Bootloader? Download mode? Recovery? Fastboot? ADB?
I assume not, since that might be a "security" risk. And also, if there were, problems like this would have solutions posted mentioning how to do that.
Sh!!!!!!!t... I was thinking I would have screenshots of the exact build that's loaded on my phone. That way I can find the right stock firmware.
Seems those screenshots are still in the phone, didn't get moved to external memory
All I know for sure is it's Andorid 5.1.1, but that probably isn't specific enough to get the exact right boot and recovery images.
I intend to flash the boot.img and recovery.img to my phone. Hopefully, this will avoid any data loss, while clearing the FRP lock bootloop.
I got the stock firmware for Android 5.1.1 for my Galaxy A3 (2016) (SM-A310M) here:
https://www.sammobile.com/firmwares/galaxy-a3-/SM-A310M/TTT/download/A310MUBU2APE2/73991/
This set of instructions says to extract the .img file(s) to flash, then just .tar them up using 7zip, and flash it as AP in ODIN.
http://howto.highonandroid.com/sams...extract-stock-recovery-from-samsung-firmware/
But... this one says to use Unified Android Toolkit, option ‘8’ (Create an Odin flashable tar), and then flash with ODIN.
https://skipsoft.net/flashing-a-single-partition-i-e-system/
Fortunately, I have a Galaxy A3 (2017) (SM-A320Y), which I was just about to upgrade to for my daily driver. It's blank, running Android 7.0, so it means I can test this process, see if data is preserved, with almost no risk to actual data. Got that firmware here:
https://www.sammobile.com/firmwares/SM-A320Y/COO/download/A320YDXU1BQH2/189605/
Ironically... I don't yet have a great method to intentionally trip the FRP lock bootloop
I think rooting and then unchecking OEM Unlock should do it (that's what wrecked my A310M)
FRP lock - Usb does not recognize
Hi, Everyone!
Sorry my english.
My problem is the same as yours.
however, after this frp lock message appeared, my phone goes into download mode, but the pc does not recognize any more. what can i do to get flash from the rom stock and solve the frp lock problem.
Help me, please!
Thank you all
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
FRP Custom binary Lock
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Blackion said:
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Click to expand...
Click to collapse
If they're both stock based firmware then you can just flash the stock S7 firmware. Data should remain untouched.
Hi
I am just stuck with the same problem. I have downloaded the latest Stock ROM. But unsure which options to select in ODIN and what files to select.
I presume only select AP. Also, hope I will not lose any data.
Please help me out.
Hi, I'm trying to get my phone back. I lost my phones password that is used to unlock the phone.
I dont know my google account im using on the phone either. Yes this is my phone.
I dont want to get locked out with google frp either
If i put twrp on and do a factory wipe, will i still need the pin?
Also, my phone doesn't need the pin to boot. thanks in advance
nebula37 said:
Hi, I'm trying to get my phone back. I lost my phones password that is used to unlock the phone.
I dont know my google account im using on the phone either. Yes this is my phone.
I dont want to get locked out with google frp either
If i put twrp on and do a factory wipe, will i still need the pin?
Also, my phone doesn't need the pin to boot. thanks in advance
Click to expand...
Click to collapse
No you won't need a pin in twrp if you have not encrypted the device..no you won't need pin to boot, but frp might get you..not sure how that works, I also feel like there are files you can delete through twrp to remove lock code, someone else will have to confirm this though, just something I heard
thanks but its not a concern now. I was on latest official ota update, flashed twrp but cant get lineage, or any custom rom to fully boot. It just gets to the logo screen and wont go any further. I have not used my moto a while.
nebula37 said:
Hi, I'm trying to get my phone back. I lost my phones password that is used to unlock the phone.
I dont know my google account im using on the phone either. Yes this is my phone.
I dont want to get locked out with google frp either
If i put twrp on and do a factory wipe, will i still need the pin?
Click to expand...
Click to collapse
FRP is disabled on unlocked bootloader.
PIN can be deleted with twrp's file manager.
LOS - you flashed wrong build. You need custom rom for N Modem. LOS by Hashbang works on N modem.
Hi i have successfully installed EU rom last week, now I wanted to root my phone, but when i enter twrp its asking me for password to decrypt but i never set any password for that. Any ideas? I tried my PIN but it doesnt work. I don't want more format data...
I have last twrp from official site
L3v1X said:
Hi i have successfully installed EU rom last week, now I wanted to root my phone, but when i enter twrp its asking me for password to decrypt but i never set any password for that. Any ideas? I tried my PIN but it doesnt work. I don't want more format data...
I have last twrp from official site
Click to expand...
Click to collapse
It works perfectly with your pin/password you use in Android for unlocking the screen. It can also work with your pattern for unlocking the screen in Android, if you use ir.
Make sure to use the latest official TWRP 3.5.1_9-0
If neccessary, reset your pin/password in Android, Settings
But if you switched the ROM - you HAD to Format data
ill try reset pin
EDIT: I used pattern lock and now it works
zgfg said:
It works perfectly with your pin/password you use in Android for unlocking the screen. It can also work with your pattern for unlocking the screen in Android, if you use ir.
Make sure to use the latest official TWRP 3.5.1_9-0
If neccessary, reset your pin/password in Android, Settings
But if you switched the ROM - you HAD to Format data
Click to expand...
Click to collapse
Hi ,
I was using PE rom , but it was stuck on "NO OS installed".
So i tried flashing another rom and now it doesn't accept my decryption pattern.
Any solution except formatting data ?
Please help.
altafharsh60 said:
Hi ,
I was using PE rom , but it was stuck on "NO OS installed".
So i tried flashing another rom and now it doesn't accept my decryption pattern.
Any solution except formatting data ?
Please help.
Click to expand...
Click to collapse
When you change a ROM, you MUST Format Data (mot Wipe Data)
But your problem might be also something else, wrong flashing ROM, who knows (there are guudes how to do that - seems people don't find them and don't read, because the guide must definitely say about Formatting Data, hence it wouldn't be later questions about - unfortunately, common issue)