hello
my device us not working and when going to recovery mode phone screen is show this :-
MMC : mmc_read fail
Movinand Checksum Confirmation Fail
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME : SM-G530H
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Custom
KNOX WARRANTY VOID : 0×1 (0)
QUALCOMM SECUREBOOT ENABLE (CSB)
RP SWREV : S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD : ENABLE
__________________________________________
please help me ???
Thanks
sorry for my English
this screen
Flash the stock rom via Odin.
Noureo said:
Flash the stock rom via Odin.
Click to expand...
Click to collapse
i tried this but it is not working
Mohammed Bhere said:
i tried this but it is not working
Click to expand...
Click to collapse
I don't know then. :/
Visit a customer center maybe?
Noureo said:
I don't know then. :/
Visit a customer center maybe?
Click to expand...
Click to collapse
I will do it
Mohammed Bhere said:
I will do it
Click to expand...
Click to collapse
had the problem too on a note 4. thought it was the usb port. replaced usb port. turned out to be mother board going.
Related
I have brought my new Samsung galaxy s4 GT-i9505
When i got up to download mode (odin mode)
Then i saw few things which i never saw before..
can any one explain about the details below please .. i don't wanna see any links just i wanted to know in this posts so that i can ask few questions
I have seen something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
what's that current binary : custom means, an system status custom means..
and what about write protection : Enable . does it affect anything when flashing stock rom through odin.
and what about eMMC Burst Mode: Enabled ..
Please if anyone that i will be grateful.
sorry for my bad english
nishangrg said:
I have brought my new Samsung galaxy s4 GT-i9505
When i got up to download mode (odin mode)
Then i saw few things which i never saw before..
can any one explain about the details below please .. i don't wanna see any links just i wanted to know in this posts so that i can ask few questions
I have seen something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
what's that current binary : custom means, an system status custom means..
and what about write protection : Enable . does it affect anything when flashing stock rom through odin.
and what about eMMC Burst Mode: Enabled ..
Please if anyone that i will be grateful.
sorry for my bad english
Click to expand...
Click to collapse
Here you go mate http://forum.xda-developers.com/showthread.php?t=2447832you should Know what Knox warrant void means
Repulsa said:
Here you go mate http://forum.xda-developers.com/showthread.php?t=2447832you should Know what Knox warrant void means
Click to expand...
Click to collapse
Thankyou bro but what about ..
eMMC burst mode : enabled
and
write protection mode : enabled
what about these two..
Repulsa said:
Here you go mate http://forum.xda-developers.com/showthread.php?t=2447832you should Know what Knox warrant void means
Click to expand...
Click to collapse
Write potecton simply means that this newer version of the galaxhttp://romcook.com/?d=531CB2E216y has............wait fo it...............A LOCKED BOOTLOADER.................. Essentially, you will have to use a software tool to create a checksum hash code for your knox protected bootloaderand ulitmately unlock it. cheers.
---------- Post added at 10:14 PM ---------- Previous post was at 10:02 PM ----------
Repulsa said:
Here you go mate http://forum.xda-developers.com/showthread.php?t=2447832you should Know what Knox warrant void means
Click to expand...
Click to collapse
Write potecton simply means that this newer version of the galaxy has............wait fo it...............A LOCKED BOOTLOADER.................. Essentially, you will have to use a software tool to create a checksum hash code for your knox protected bootloaderand ulitmately unlock it. cheers.
nishangrg said:
I have brought my new Samsung galaxy s4 GT-i9505
When i got up to download mode (odin mode)
Then i saw few things which i never saw before..
can any one explain about the details below please .. i don't wanna see any links just i wanted to know in this posts so that i can ask few questions
I have seen something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
what's that current binary : custom means, an system status custom means..
and what about write protection : Enable . does it affect anything when flashing stock rom through odin.
and what about eMMC Burst Mode: Enabled ..
Please if anyone that i will be grateful.
sorry for my bad english
Click to expand...
Click to collapse
All I can say.
It has been flashed before and is running a custom rom/recovery.
Knox is tripped. Flash binary is tripped.
Knox counter is a one time programmable efuse that cannot be reset anyhow. It can be a warranty void issue in many areas.
Thus you wont be able to use the KNOX containersnow.
Write protection enabled means a locked bootloader. Just simple.
"If someone helps, never forget to hit thanks ? "
In odin mode i saw something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
i have my firmware 4.3 and i want to downgrade to 4.2.2 is it possible with these settings write protection: Enable and eMMC burst mode: Enabled???
I mean is it safe to downgrade to any Stock firmware?
nishangrg said:
In odin mode i saw something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
i have my firmware 4.3 and i want to downgrade to 4.2.2 is it possible with these settings write protection: Enable and eMMC burst mode: Enabled???
I mean is it safe to downgrade to any Stock firmware?
Click to expand...
Click to collapse
Sorry mate its not possible please check this thread inorder to know more about Knox Warranty Void. http://forum.xda-developers.com/showthread.php?t=2447832 have a nice day..
Repulsa said:
Sorry mate its not possible please check this thread inorder to know more about Knox Warranty Void. http://forum.xda-developers.com/showthread.php?t=2447832 have a nice day..
Click to expand...
Click to collapse
and one thing i have no warrenty of this phone does it means is it possible?
nishangrg said:
and one thing i have no warrenty of this phone does it means is it possible?
Click to expand...
Click to collapse
Either you have any warranty or not as long you updated your phone to 4.3 stock samsung rom there's no more chance to come back to 4.2.2 .unless i might be wrong? merry christmas to you sir and have a nice day.
Repulsa said:
Either you have any warranty or not as long you updated your phone to 4.3 stock samsung rom there's no more chance to come back to 4.2.2 .unless i might be wrong? merry christmas to you sir and have a nice day.
Click to expand...
Click to collapse
OMG then my phone is stock. I can't flash any other Samsung stock firmware. That's very bad i need to change my phone
anyway thankyou very much for the info sir and merry christmas to you too.
Hello i can't unbrick my s4.
I try to install cwm , but it's failed and now I can't install anything!
when i start my phone a message say me : "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I try this:
- reinstall , renew the firmware by kies.(on windows 7 and 8)
- install by odin a lot of stock rom (the latest two is: TIM-I9505XXUGNF1-20140708100448.zip and I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX.zip)
but the odin mode say me always write (auth) fail!.
In fact on my screen there is this text:
Code:
currenty binary: custom
system status: Official
knox kernel lock: 0x0
knox warrany void: 0x0
csb-config.lsb: 0x30
write protection: Enable
eMMC BURST MODE enabled
what can I do ?please help me ... thanks in advance and sorry for my bad english ... I'm italian!
hackmejava said:
Hello i can't unbrick my s4.
I try to install cwm , but it's failed and now I can't install anything!
when i start my phone a message say me : "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I try this:
- reinstall , renew the firmware by kies.(on windows 7 and 8)
- install by odin a lot of stock rom (the latest two is: TIM-I9505XXUGNF1-20140708100448.zip and I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX.zip)
but the odin mode say me always write (auth) fail!.
In fact on my screen there is this text:
Code:
currenty binary: custom
system status: Official
knox kernel lock: 0x0
knox warrany void: 0x0
csb-config.lsb: 0x30
write protection: Enable
eMMC BURST MODE enabled
what can I do ?please help me ... thanks in advance and sorry for my bad english ... I'm italian!
Click to expand...
Click to collapse
Hi,
Check this thread :
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi,
Check this thread :
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
thanks you for the answer, but when I flash the firmware with odin (and fail),
the s4 in download mode is written on the phone
Code:
SW REV. CHECK FAIL : fused 4, Binary : 3
the latest firmware i try to flash is :
I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar
Please Help Me!:crying:
hackmejava said:
thanks you for the answer, but when I flash the firmware with odin (and fail),
the s4 in download mode is written on the phone
Code:
SW REV. CHECK FAIL : fused 4, Binary : 3
the latest firmware i try to flash is :
I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar
Please Help Me!:crying:
Click to expand...
Click to collapse
Mate ,
That is an old leaked ( jan 2014) software....why you want to install it? Anyway what you have installed now , maybe the bootloader installed now in your phone is newer that the one your trying to install , if so it will not let you
Ok i don t know why i m trying to install this firmware . I m trying to unbrick my phone can you link me the right firmware? Please thanks you in advance!
hackmejava said:
Ok i don t know why i m trying to install this firmware . I m trying to unbrick my phone can you link me the right firmware? Please thanks you in advance!
Click to expand...
Click to collapse
Hi mate ,
First of all read this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
There are very useful tips to solve softbrick issues , there it also gives you links to firmware files or check here
http://www.sammobile.com/firmwares/
MAX 404 said:
Hi mate ,
First of read this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
There are very useful tips to solve softbrick issues , there it also gives you links to firmware files or check here
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
thanks you for the answer but in this list of firmwares there isn't a italian firmware! what can I do?
hackmejava said:
thanks you for the answer but in this list of firmwares there isn't a italian firmware! what can I do?
Click to expand...
Click to collapse
Check the other link Sammobile , there they have all firmware
Thanks you ! My phone working now! The problem was Windows 8.... on windows 7 odin flash fine![emoji3]
HI,
Im trying to load a stock firmware onto my 32GB N9005 Note 3, but its failing when the flash starts.
I downloaded a HK version of 5.0 ([247616]»˝–«_N9005_N9005ZSUGOL1_÷–π˙œ„∏€(TGY)_5.0.20160317183141.tar) , and it fails at some security check at the start ( Fail(Auth).
Id like to do one of 2 things:
1) Figure out how to fix the security problem so i can load the stock 5.0 on to it
or
2) I also downloaded the stock 4.4.2 , but its not in a tar.... its come in a folder with 6 files.
AP_xxxxxx.tar
BL_xxxxxxx.tar
CP_xxxxxxxx.tar
CSC_xxxxxxxx.tar
HLTE_HKTW_OPEN_16GB.pit
HLTE_HKTW_OPEN_32GB.pit
Can i use odin to flash the 4 files in 1 go to update to the stock version?
The phone was bought from China about a while ago, and its currently running a version of 4.4.4. It looks to me like its running a custom ROM, which was preinstalled from the dodgy place i bought it from, details are below:
Baseband: N9005XXUGNG1
Build Number: DONGCHAO.A429
Kernel Version:
3.4.0-2593013
[email protected] #1
Friday Nov 28 14:31:10 KST 2014
Hardware 1.06
Philz Touch also installed.....
Any help would be greatly appreciated!
Thanks
G
In donwload mode is there reactivation lock: on?
Sent from my GT-N7000
Rosli59564 said:
In donwload mode is there reactivation lock: on?
Sent from my GT-N7000
Click to expand...
Click to collapse
Im not sure how to tell.
When i enter download mode i see:
ODIN MODE
PRODUCT NAME: SM-N900P
CURRENT BINARY : CUSTOM
SYSTEM STATUS: CUSTOM
KNOW WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE )CSB_
RP SWREV: S1, T1, R1, A3, P1
SECURE DOWNLOAD: ENABLE
UDC START
Its interesting the product name is not matching my expectation. do all sm-n9005 show sm-n900p in download mode?
G
I guess the mb has been changed. It's not n9005 anymore.
http://forum.xda-developers.com/showthread.php?t=3382039
Sent from my GT-N7000
It's not an N9005. It's an N900P therefore download an N900P version of the firmware.
In case anyone wonders in the future what happened with this.... I basically gave up. Something has obviously been reworked on the phone, into a state that i'm pretty unhappy with messing with. I don't need to update it enough to push on, seems like the chances to kill it, or find myself with a phone that no longer supports lte, are too high.
Top tip: When you're buying from China.... you never get what you expect.
G
Rosli59564 said:
In donwload mode is there reactivation lock: on?
Click to expand...
Click to collapse
If lock is on, there is no chance to flash new recovery? I stuck with one phone, buddy of mine gave me some old note3, with samsung account and reactivation on, so I wonder if this is new shiny door holder or I can actually install something?
Did you try installing a stock ROM from sammobile.com? Not sure if flashing an older or newer ROM will make a difference.
Apparently, there are methods to bypass the lock.
MrBl4ckSh33p said:
I have the a problem that I install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
I only have 2 days with the phone and then this . I am a newbie on this field so that may explain why I failed. so if you know the answer to my problem, Really I would appreciate that you explain me to how fixed
Can somebody help me? Really I would appreciate the help
Click to expand...
Click to collapse
Thanks everybody for your atention