hello fellow, someone has the rom to the smartwatch u8 mt6261da?
Can post it?
Thanks
nf1974 said:
hello fellow, someone has the rom to the smartwatch u8 mt6261da?
Can post it?
Thanks
Click to expand...
Click to collapse
Here you go, just watch the video first (.mp4) if chimes for boot and shutdown are the same it might work:
(just add https: to this because i cannot share links, Im noob right now xD) //drive.google.com/open?id=13GGeJcYcP7niyUP1i3IfwXbzg4_5RAQ0G
Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you
Same Problem
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
I have the same watch and I can help you if you explain to me how to backup my firmware
zdeni82 said:
I have the same watch and I can help you if you explain to me how to backup my firmware
Click to expand...
Click to collapse
there is the tutorial here
https://www.youtube.com/watch?v=0BIeY35AUaQ
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
http://4pda.ru/forum/index.php?showtopic=713552&st=300
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.
andriraihanw said:
there is the tutorial here
wish that helpful
i have a lot of link smartwatch a1 firmware ,
but the problem , to download it i need to register to that russian forum
even Gtranslate can translate the page , but the verification method is really hard . hopefully russian people can have a mirror link.
Click to expand...
Click to collapse
I am registered there if you need login details I can give you
login details
zdeni82 said:
I am registered there if you need login details I can give you
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.
can you help me pls ?
I have a A1(MTK6261) smartwatch...
andriraihanw said:
I have this a1 smartwatch too ,
i've flash firmware from gt08 , but mostly of firmware is make my screen flipped .
and look like broke at top edge of my screen ,
this a1 developer its really not much as gt08 or dz series ,
i hope my smartwatch can be fixed ,
anyone can help?
부탁습니다
Click to expand...
Click to collapse
Hi zdeni. Pls can u help me wh login details? I have a A1(MTK6261) smartwatch and need a frimware. Thankyou verry much.
bobseptian said:
Hello, I have a smartwatch. Its codename is 'A1'. It's quite similar to GT-08. Just check at youtube, type 'smartwatch a1' and you'll know what I am talking about. Now I need its original firmware. I tried to use GT-08's firmware but it doesn't work. Does anyone here use this kind of smarwatch (A1)? Can you please help me? My watch uses MTK6261. Thank you
Click to expand...
Click to collapse
How can I upload the zip/rar/txt file?
Help me!!!
hd88alx said:
How can I upload the zip/rar/txt file?
Click to expand...
Click to collapse
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch
huynh123 said:
I also have a clock A1 and flash FW GT08 I present it as the screen upside down I almost lost the ability to touch
Click to expand...
Click to collapse
Sand me data about it....ram ?...
Just receive my A1 watch
Just receive my A1 watch: *#8375#
Code:
LD991B_V5.7_BB_ZX_S1_CAM3a01_LX7789_9304_B_V1.2
[BRANCH]
11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD_TIME]
2017/01/12 14:28
[MRE VERSION] -
267014452
HAL_VERNO:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
Here is the original firmware
zdeni82 said:
Here is the original firmware
Click to expand...
Click to collapse
Thank you very much zdeni82!
Unfortunately, the firmware is not compatible with my A1 clone
Screen is in the correct way, but the top is not usable neither the touch screen.
My watch is not the same clone as yours...
defdefred said:
Hi all,
I also (stupidly) crash my firmware before taking a backup (sorry ).
Now I also need a working firmware to salvage my A1 clone...
I try "XDA DZ-09-mtk6261 from jamesbond857", but the screen is upside down + touch screen is not well calibrate + images have wrong colors.
The only good thing is the new app for sound recording and another one for pedometer, but none are functional.
I'll try other later...
I hope that zdeni82 could upload the firmware.
And be carefull with the flashtool ! Don't run the "Memoty test" with "NOR Flash test" activated! It will ruin your firmware!
Click to expand...
Click to collapse
I tried "XDA DZ09_MT6261_32MB_NOR_2nd_ChrisTopf" and everything is working... except that the screen is flipped and so the touch
I wonder if turn the screen 180° inside the watch is possible...
Is there Anyone who need a firmware for A1? I have this watch and I can back it up.
ChorusCitrus said:
Is there Anyone who need a firmware for A1? I have this watch and I can back it up.
Click to expand...
Click to collapse
Me! me! me! me!
SP Flash Tool requires scatter file. What now?
ChorusCitrus said:
SP Flash Tool requires scatter file. What now?
Click to expand...
Click to collapse
If you watch is a 4MB/32MB RAM kind, you can take any scatter file from https://drive.google.com/drive/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
If you want to use the test RAM, don't make the same mistake I did = Most important is to uncheck the NOR test to avoid a complete lost of firmware So be careful.
The marvelous Golem explanation are here = https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
Here you go guys!
Let me know if that works.
Link: uloz.to/!UIPSqTxjlhCn/a1-firmware-rar
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Valerc said:
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Click to expand...
Click to collapse
unfortunately I do not have a backup of the SMA-R.
Of course the GW01 and NO.1 G3 firmware have the bluetooth function but only 4.0, while the SMA-R also has Bluetooth 3.0 that I think drain the battery slowly.
Happy Xmas
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Emirio said:
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Click to expand...
Click to collapse
hello , it's happened to me too , i resolved only with turn on , let the battery drain to 0 , connect to pc , turn it on , press file manager , swiping the screen , go to setting and reset all the watch , it worked to me
Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Matuskaur said:
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Click to expand...
Click to collapse
You may need this tutorial.How to update MTK smartwatch
JKSurf said:
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Click to expand...
Click to collapse
Hi, i wait somebody who can save the sma r firmware.
I hope you can make it, because my is bricked.
Here is the step by step guide to make it.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
If it is working, please send the firmware here to this forum.
Many thanks!
I also have the SMA-R without its original frware, it happened the same to put the faces, and I had to put the No.1 G3 but it does not work well, it lowers very fast the capacity of the battery and besides it does not work The heart meter. If someone can pass the SMA-R firmware for the whole community? We would be very grateful to you
While waiting, can someone tell me where the gw01 ulefone firmware can be downloaded?
Update, is here in case anyone needs it:: Forum: xda-developers Smartwatches Misc Other SmartWatches Ulefone GW01 smartwatch Puesto # 53
Pd: I have requested by mail and by your facebook to SMA to send me the firmware, if they send it I would post it in this forum
Yesterday, after two days i received it, my SMA-R doesn't work anymore. The display is always black... Do you know if there's a way to fix it? Thanks
Install the uplink firmware qw1 that goes very well. Until someone puts sma firmware
Do you have a tutorial? I don't know how to do it
Sorry for not letting me put the link to the page, but follow this route and there you can find the firmware and manual
Update, is here in case anyone needs it::
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
--------Ulefone GW01 smartwatch Puesto(# 53
Manual
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
.............Ulefone GW01 runs with firmware of No.1 G3 by Tornator
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
alfhas said:
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
Click to expand...
Click to collapse
I know GW01 and G3, but what is SMA-R ? Will you brick your watch if you don't flash the firmware successfully.....Think about Pablo they recommended us not to flash other watch firmware, they might make your watch no longer work.
The sma-r is another smart watch just like g3vo gw1 ... all use similar hardware and firmware is compatible ... If you can repair or reset the clock when it is broken, you can always put another firmware and recover The clock even with different system of these three compatible.
Unfortunately I use a Mac so I can't use FlashTools, even using Virtualbox to emulate Windows... Do you know if there's some other software for mac? thanks
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Original SMA-R Firmware
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...-benzóico.
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
newbiesk said:
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Click to expand...
Click to collapse
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...