Database Users

what is the secret code for DZ09 CPU: MTK6260A 533MHz to get into service mode

HELLO
I have a new smartwatch but when i put my sim it doesn't work with my cell phone company ,
but with two other it works ,
anyway my question is :
what is the secret code for the service mode for the smartwatch DZ09 so i could enable the usage of the frequency 850 MHz .
thank you and have a nice day

me12 said:
HELLO
I have a new smartwatch but when i put my sim it doesn't work with my cell phone company ,
but with two other it works ,
anyway my question is :
what is the secret code for the service mode for the smartwatch DZ09 so i could enable the usage of the frequency 850 MHz .
thank you and have a nice day
Click to expand...
Click to collapse
The service code is *#3646633# or *#993646633# but as I know (I have checked DZ09 firmware) the service mode is pretty cleaned up of many useful things as "set network band" - even in this case you can do it by installing a GT08 compatible firmware (not all are compatible) or Iradish Y6 (any is compatible) and check first code (GT08) or second (for I9Y6), before any of these don't forget to make a full readback from 0x00000000 to 0x01000000 and save it somewhere safe, in case those kits are not matching with your phone you can get back to your working version

thank you
Golem_ said:
The service code is *#3646633# or *#993646633# but as I know (I have checked DZ09 firmware) the service mode is pretty cleaned up of many useful things as "set network band" - even in this case you can do it by installing a GT08 compatible firmware (not all are compatible) or Iradish Y6 (any is compatible) and check first code (GT08) or second (for I9Y6), before any of these don't forget to make a full readback from 0x00000000 to 0x01000000 and save it somewhere safe, in case those kits are not matching with your phone you can get back to your working version
Click to expand...
Click to collapse
hi Golem_
first thank's for sharing your knowledge with me
i have tried the codes *#3646633# or *#993646633# on my DZ09 but nothing happens ,
anyway i searched for the Iradish Y6 software to install it but i didn't find it (yet) so could you give me a link to download the software from it ?
regards me12

me12 said:
hi Golem_
first thank's for sharing your knowledge with me
i have tried the codes *#3646633# or *#993646633# on my DZ09 but nothing happens ,
anyway i searched for the Iradish Y6 software to install it but i didn't find it (yet) so could you give me a link to download the software from it ?
regards me12
Click to expand...
Click to collapse
before anything in <flash tool> please do a full <readback> from 0x00000001 to 0x01000000, this could spare you of huge amount of headaches in case your watch was produces with other type of components than common (a different type of display maybe for instance)

thank you
ok i got the iradish-y6
do you mean by " do a full <readback> from 0x00000001 to 0x01000000" like doing a backup to my smartwatch , i know how to do backup
if not can you tell me how to do a full <readback> from 0x00000001 to 0x01000000
and what ROM flash do you recommend to use
its my first time iam flashing a smartwatch
thank's

me12 said:
ok i got the iradish-y6
do you mean by " do a full <readback> from 0x00000001 to 0x01000000" like doing a backup to my smartwatch , i know how to do backup
if not can you tell me how to do a full <readback> from 0x00000001 to 0x01000000
and what ROM flash do you recommend to use
its my first time iam flashing a smartwatch
thank's
Click to expand...
Click to collapse
yes <readback> and backup are in a way in synonymy, yet <readback> is a command in <Flash Tool>
https://drive.google.com/folderview?id=0B_PhIaLE_-ogcXBFSEdXbzBZX0E&usp=sharing
These are tested fully working tools
Keep us informed!

hi
i tried but it shows me 0% and it is stuck like that
how to fix this
thank's

me12 said:
i tried but it shows me 0% and it is stuck like that
how to fix this
thank's
Click to expand...
Click to collapse
I've met your situation to a dozen of members around - same issue, driver installation. . .
Windows 7 and above doesn't like to much other's drivers, so against any logic after you install mtk drivers they are replaced with microsoft generic drivers, mostly I have fixed this problem opening device manager, click on ports, press action, add legacy hardware, install the hardware that I manually select from a list, next, have disk, go to your mtk folder and choose the inf, open, choose driver and ready
the same problem I have fixed just diconecting the computer from internet before to install them
For XP is simpler, go to mtk drivers, click right on the inf file and check install
Hope it helps

thank you
i want to install xp on my VMware Player
will it work because its on vm or it doesn't matter
thank you

me12 said:
thank you
i want to install xp on my VMware Player
will it work because its on vm or it doesn't matter
thank you
Click to expand...
Click to collapse
I don't have any knowledge about the virtual machines and their interaction with peripheral hardware

Hi there, I have released a new small utility - ReadBack Extractor - which could help any of you want to extract from a<Readback> ROM dump a full flawless firmware, to whom it may concern , check this link
http://forum.xda-developers.com/sma...readback-extractor-mtk6260-firmware-t3289272/

Please does anyone have the stock ROM file for apro q18 smart watch

i have the driver for dz09 in rar folder well its in my desktop any way.. if any one interested then just email me.. to connect to com port or some thing im not so sure what it does.. but its abit of help that i can offer
[email protected]

I forgot password of my dz09 please help.............. I put the password to 45665445 but he says wrong password every time please help me

Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?

APN
DJ ROLEX said:
Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?
Click to expand...
Click to collapse
You have to get the APN from your sim card network supplier, enter this in the Network connectivity on the watch. Note that some versions dont have a conectivity setting, but if it's asking for one , maybe just needs setting.
---------- Post added at 01:18 AM ---------- Previous post was at 01:07 AM ----------
DJ ROLEX said:
Hi,There I Have A DZO9 Smaartwatch but it has not installed QQ Player & I Don't No How to Use A Google in Smartwatch,In Display Of Watch "Please Give APN number" So Can You tell me how can i solve this problem?
Click to expand...
Click to collapse
You have to get the APN from your sim card network supplier, enter this in the Network connectivity on the watch. Note that some versions dont have a conectivity setting, but if it's asking for one , maybe just needs setting.

how can i see my mtk version and firmware? i have dz09,but i don't have video player and connectivity setings. please help.

i have a dzo9 smart watch. That watch has no IMEI number please tell me the code to check IMEI number.

akhil nayk said:
i have a dzo9 smart watch. That watch has no IMEI number please tell me the code to check IMEI number.
Click to expand...
Click to collapse
*#06#

This code secreta work for mtk2502 is a no1 g6

W90 Smartwatch (need help)

Hi,
I've just bought the w90 watch and try to flash it. I follow the steps for flash a mtk 6260a but I have some problem:
-first I have a empty backup folder so I can't replace it with the original one :-/
- when I flash the watch, I've sound, the watch vibrate, making a sound when i plug on the usb, with some firmware i've sound when i click the menu button, with other I can power off and have the sound too, the only problem is that I have a black screen with all the firmware I tested.
When I flash it, I've the green circle at the end (with 95% of the firmware i've tested).
I try to flash mine because I see on internet these watch with a better menu (more colorfull, background, more theme, more watch face).
I've spend my day searching how to fix my w90 watch.
And finally, i found the original firmware here: downloads.tinydeal.com/Tools_to_write_IMEI.rar (the firmware is in the archive with SN write tool)
I hope that'll help some people with this watch.

W90
Hello everybody,
I've just bought a W90 smartwatch and I've been waiting to receive it directly from China.
I've bought the W90 in order to change its firmware, thanks to its MTK6260A cpu, but I didn't undestand if I can or not with teh procedure found out in the Forum XDA.
Could anyone help me, please?
Thank you a lot.

ivan.fil said:
Hello everybody,
I've just bought a W90 smartwatch and I've been waiting to receive it directly from China.
I've bought the W90 in order to change its firmware, thanks to its MTK6260A cpu, but I didn't undestand if I can or not with teh procedure found out in the Forum XDA.
Could anyone help me, please?
Thank you a lot.
Click to expand...
Click to collapse
firmware ok here

Hello!
Can I change the original watchface with all the watchfaces compatible with the DZ09 (there are a lot of beautiful watchfaces posted in XDA by other members)?
Have I any limitation about the dimension in KB of the watchfaces?
If yes, could I flash any other firmware to the W90 (for example, any other firmware compatible with the 6260a chipset)?
Thank you very much.
Best regards

Hi, need rom for u80 pft022. Could anyone help me, please?

votrunghankts said:
firmware ok here
Click to expand...
Click to collapse
This firmware's. The screen shifted up and down the Strip

Ever get any help with this. Like an idiot I flashed the firmware here and same results. Shifted screen. Also cannot find any other compatible firmware.
---------- Post added at 05:24 AM ---------- Previous post was at 05:20 AM ----------
dinatron said:
This firmware's. The screen shifted up and down the Strip
Click to expand...
Click to collapse
Any fix?

firmware
Exploda said:
Ever get any help with this. Like an idiot I flashed the firmware here and same results. Shifted screen. Also cannot find any other compatible firmware.
---------- Post added at 05:24 AM ---------- Previous post was at 05:20 AM ----------
Any fix?
Click to expand...
Click to collapse
Here operating firmware http://4pda.ru/forum/index.php?showtopic=757536&st=140

dinatron said:
This firmware's. The screen shifted up and down the Strip
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/0B_hRh3DjuBoeU2RuRzZDaV9aUGc?usp=sharing
use the third firmware. Took me forever to get it too. Thanks to Golem_

ok

When I reply to messages on my w90, I it tells me to delete, block and something else.. I have to hit ok to delete but it doesn't delete message.. It then brings me to reply etc.. When I reply, it seems to send me a the reply 6 times instead of one.. What do I do

mohamed
please i have the same problem with you i want the link of original firmware and how do do it with black screen and my watch
w90

SMA-R runs with firmware of Ulefone GW01 and NO.1 G3

Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.

Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you

Valerc said:
Hello , i need backup too because my favourite faces doesnt work after reset , i dont know why...
what you mean with miss the dual bluetooth? it doesnt connect anymore on your phone or what?
thank you
Click to expand...
Click to collapse
unfortunately I do not have a backup of the SMA-R.
Of course the GW01 and NO.1 G3 firmware have the bluetooth function but only 4.0, while the SMA-R also has Bluetooth 3.0 that I think drain the battery slowly.
Happy Xmas

Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?

Emirio said:
Hi friends, i use my smartwatch gw01 with fundo app, today i try the clock faces in the app. But when i erase the clock face on screen the watch just show black screen. I think its bricked. So how can i fix this situation? Can you tell me clearly how can i save my watch?
Click to expand...
Click to collapse
hello , it's happened to me too , i resolved only with turn on , let the battery drain to 0 , connect to pc , turn it on , press file manager , swiping the screen , go to setting and reset all the watch , it worked to me

Salandrino said:
Hi,
I have a smartwatch SMA-R, unfortunately bricked after a short time, but thanks to this forum I flashed the firmware of Ulefone GW01 (thanks to Jorge Moreira).
It also works well with the NO.1 G3 firmware (thanks to Tornator).
PROS:
- Two more apps, thermometer, UV detector (I do not think highly accurate)
- Easily customizable watch faces (with NO.1 G3) firmware
CONS:
- you miss the dual bluetooth connection (SMA-R has bluetooth 3.0 and 4.0)
unfortunately I do not have the original firmware of the SMA-R, I have also written to the SMA factory but I was never responded.
If any good guy did backup of the original firmware would be great to have him.
Thank you.
Click to expand...
Click to collapse
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.

Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!

Matuskaur said:
Hi. I was see on xda threads that how it possible to make. I wait it a lot, because i have Sma watch too, but with gw1 firmwade, but it not soo good than the original. If possible please save the firmware and send here, please! Thank you!
Click to expand...
Click to collapse
You may need this tutorial.How to update MTK smartwatch

JKSurf said:
I just got the SMA-R in the mail today, I can upload the firmware if you can guide or link me to the steps.
Click to expand...
Click to collapse
Hi, i wait somebody who can save the sma r firmware.
I hope you can make it, because my is bricked.
Here is the step by step guide to make it.
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
If it is working, please send the firmware here to this forum.
Many thanks!

I also have the SMA-R without its original frware, it happened the same to put the faces, and I had to put the No.1 G3 but it does not work well, it lowers very fast the capacity of the battery and besides it does not work The heart meter. If someone can pass the SMA-R firmware for the whole community? We would be very grateful to you
While waiting, can someone tell me where the gw01 ulefone firmware can be downloaded?
Update, is here in case anyone needs it:: Forum: xda-developers Smartwatches Misc Other SmartWatches Ulefone GW01 smartwatch Puesto # 53
Pd: I have requested by mail and by your facebook to SMA to send me the firmware, if they send it I would post it in this forum

Yesterday, after two days i received it, my SMA-R doesn't work anymore. The display is always black... Do you know if there's a way to fix it? Thanks

Install the uplink firmware qw1 that goes very well. Until someone puts sma firmware

Do you have a tutorial? I don't know how to do it

Sorry for not letting me put the link to the page, but follow this route and there you can find the firmware and manual
Update, is here in case anyone needs it::
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
--------Ulefone GW01 smartwatch Puesto(# 53
Manual
Forum: xda-developers
--Smartwatches Misc
----Other SmartWatches
.............Ulefone GW01 runs with firmware of No.1 G3 by Tornator

Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again

alfhas said:
Sorry, if you have not updated, try to connect the cable to the clock and the pc, to see if you let go of the menus and to be able to reset the system. If it tries the same thing but with the clock off or starting again
Click to expand...
Click to collapse
I know GW01 and G3, but what is SMA-R ? Will you brick your watch if you don't flash the firmware successfully.....Think about Pablo they recommended us not to flash other watch firmware, they might make your watch no longer work.

The sma-r is another smart watch just like g3vo gw1 ... all use similar hardware and firmware is compatible ... If you can repair or reset the clock when it is broken, you can always put another firmware and recover The clock even with different system of these three compatible.

Unfortunately I use a Mac so I can't use FlashTools, even using Virtualbox to emulate Windows... Do you know if there's some other software for mac? thanks

Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.

Original SMA-R Firmware
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...-benzóico.
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
newbiesk said:
Does anybody has the firmware for the SMA-R? Please post it. I'd like to test it on my GW01.
The watchfaces with the steps are great.
Click to expand...
Click to collapse
Hi all,
I have the original SMA-R Firmware
In case you want, send the email, because I can not put a link to download ...

US18 SMARTWATCH FILE FIRMWARE TO FLASH? help =( [NEW Clock FACE MAKE BLACK SCREEN]

i try change new face clock on us18 smartwatch that i buy from aliexpress site, and the firmware on device be black i can't use with smartwatch anymore i always see black screen
i very sad i need someone that can upload the file flash to here please
the link of the watch on aliexpress
https://www.aliexpress.com/item/New...lgo_pvid=c5831ee3-ca02-44b3-ad56-f1263d4ad57c

solved, can close the post

israrami said:
solved, can close the post
Click to expand...
Click to collapse
Hi! Can you explain me how you solved it? I have the same problem...
Many thanks!

V8 Smart Watch

Hi,
I need some assistance. Is it possible to update software or something I can do to change the style of this" V8 Smart Watch"?
It has a MTK6261D processor. I've seen the watch running different looking "skins" almost. So there must be a way?

figure anything out yet? i've got the same watch. bricked. touchscreen won't work.
need firmware.

i also need firmware friends

i'm need a framework too :crying:

V8 need room
i need too a firmware for the smartwatch v8 what have one button, please help me with that :crying::crying::crying: MY RELOJ is dead:crying::crying:

heres the firmware
HERE{https://drive.google.com/file/d/}+++++{19R-MSycdzK6f78ECaADXCQH9yx0F6Gx1/view}
it won't let me post links ....

gamingitup said:
here{https://drive.google.com/file/d/}+++++{19r-msycdzk6f78ecaadxcqh9yx0f6gx1/view}
it won't let me post links ....
Click to expand...
Click to collapse
links can not

My smartwatch v8 mt6261d I can not change wallpaper pls help me,in micro sd photos to 240 x240 but there is no option to import an image

@kos-greece Greetings friend here I have a firmware the only problem that I see is that the camera does not work.

V8 spd sc6531 file needed