Database Users

recovery verified failed?

ok so rooted and loaded the 1.031.00_ww_gen1 for my tab.
installed everything cool nice looking no screen or wifi probs at all.
ive since decided i would like to try flexreaper as ive heard it has the ring and faceunlock working,
so i check my recovery is working so i can flash a new update.zip
when i try to enter recovery i get this message:
rasing cache before SD update
SD update cmd: recovery
--update_Package=SDCARD:update.zip
Booting recovery kernel image
(IN RED) Recovery verified failed
if gone to acer recovery installer and tried installing the cwm1.3.4 and 1.7 both by thro2002ro but to no avail still the same error,
i also installed clockworkmod and tried installing the recovery there and rebooting .....to the same error ....can anyone help?

chisme said:
ok so rooted and loaded the 1.031.00_ww_gen1 for my tab.
everything can be
installed everything cool nice looking no screen or wifi probs at all.
ive since decided i would like to try flexreaper as ive heard it has the ring and faceunlock working,
so i check my recovery is working so i can flash a new update.zip
when i try to enter recovery i get this message:
rasing cache before SD update
SD update cmd: recovery
--update_Package=SDCARD:update.zip
Booting recovery kernel image
(IN RED) Recovery verified failed
if gone to acer recovery installer and tried installing the cwm1.3.4 and 1.7 both by thro2002ro but to no avail still the same error,
i also installed clockworkmod and tried installing the recovery there and rebooting .....to the same error ....can anyone help?
Click to expand...
Click to collapse
For those who need the solution :
I presume this should work to downgrade from any ICS builds as well .
just fixed that problem been at it for almost 10 hours to find a correct solution
get your correct UID . In my case there some weird problem UID wasnt diplaying it all (insted i was seeing serial number even with adb devices..) ... use backup_tool to get UID works greats hands down !
get it from this link
Click to download
if that doesntt work look across the forum on how to find your UID
once you have that get EUUs_SBK_Acer_A500_1.016.05_COM_GEN1
get it from this link Click to Download
dont plug in iconia tab let it search for firmware about 5 min eventually it will ask you if you want to restore it say yes and input your CPUID (same as UID) Then put the TAB Into APX MODE
Hold power +reset button for 3 sec then let it power go one sec later let reset go you can use board pin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and plug in your usb cable .
This process may take upto 10 mins ... or less
sit back it will be restored back to stock ! HC 3.01
thats it
nvflash utility did not work for me !

chisme said:
ok so rooted and loaded the 1.031.00_ww_gen1 for my tab.
installed everything cool nice looking no screen or wifi probs at all.
ive since decided i would like to try flexreaper as ive heard it has the ring and faceunlock working,
so i check my recovery is working so i can flash a new update.zip
when i try to enter recovery i get this message:
rasing cache before SD update
SD update cmd: recovery
--update_Package=SDCARD:update.zip
Booting recovery kernel image
(IN RED) Recovery verified failed
if gone to acer recovery installer and tried installing the cwm1.3.4 and 1.7 both by thro2002ro but to no avail still the same error,
i also installed clockworkmod and tried installing the recovery there and rebooting .....to the same error ....can anyone help?
Click to expand...
Click to collapse
Read , read, if you installed the leak or received the OTA from Acer to ICS you need to unlock your boot loader and install custom recovery.
There are at least 2 threads in dev section about it.

civato said:
Read , read, if you installed the leak or received the OTA from Acer to ICS you need to unlock your boot loader and install custom recovery.
There are at least 2 threads in dev section about it.
Click to expand...
Click to collapse
The problem is all xda developers are working under M$ Windows programs. Where are the MacOsX dev?
I'm waiting for a good soul to develop a MicroSD or Mac ICS bootloader unlocker...
Sent from my A500 using Tapatalk 2

civato said:
Read , read, if you installed the leak or received the OTA from Acer to ICS you need to unlock your boot loader and install custom recovery.
There are at least 2 threads in dev section about it.
Click to expand...
Click to collapse
I have the same problem but I think Im in the correct path but I cant seem to go to download mode. Im stuck in "entering acer download mode" now I dont know what to do. I.ve read somewhere here in the forums that it has something to do with the windows version. I did it in windows xp. Help pls

ebonikeys said:
I have the same problem but I think Im in the correct path but I cant seem to go to download mode. Im stuck in "entering acer download mode" now I dont know what to do. I.ve read somewhere here in the forums that it has something to do with the windows version. I did it in windows xp. Help pls
Click to expand...
Click to collapse
did u try what i posted above

tawhid111 said:
did u try what i posted above
Click to expand...
Click to collapse
Not yet sir.. I'll try it on monday after reformating my laptop.. thx

ebonikeys said:
I have the same problem but I think Im in the correct path but I cant seem to go to download mode. Im stuck in "entering acer download mode" now I dont know what to do. I.ve read somewhere here in the forums that it has something to do with the windows version. I did it in windows xp. Help pls
Click to expand...
Click to collapse
You are in the download mode = entering download mode. Its the same thing.
Just run the command.

Recovery verified failed ...
Hi all,
I have the same problem
On the splash screen:
Booting recovery kernel image
(IN RED) Recovery verified failed ...
i tried different things like the post before, but nothing change.
Nothing important on my a500, i would like to reinit the system and install FLEXREAPER-R14-1.033.00_1.031.00-ICS.
Thank you for your help
Gill

Yesssssss
Good news!!
Succeed with blackthund3r_A500_APX_Flash_Tool_v0.3-V3BL-CWM
and
first recovery_thor17_403... but black screen...
so with V3-APX-PACKAGES

Hmm nothing has worked for me. Have tried several things. Sometimes the Acer Utility says bad cpu id, then it says its trying to install. Tried ApX Flash but my tab does nothing. I get a power light and that is it. Well maybe another day or two I will figure it out.

blueis300 said:
Hmm nothing has worked for me. Have tried several things. Sometimes the Acer Utility says bad cpu id,
Click to expand...
Click to collapse
Not sure what u mean by Acer utility, but the first thing u need is ya cpuid - the flash wont work without it....
I get a power light and that is it. Well maybe another day or two I will figure it out.
Click to expand...
Click to collapse
the 2nd thing you'll need is the Acer drivers, run the setup.exe. turnntab off and get into apx with button press, then check device manager
that u got acer boot recovery drivers installed under USB controllers, if they not there then check adb interface for apx drivers, as long as
u have one or other u shud be all good

I tried the PBJ upgrade and my CPUID said it was fine but sat at install and never did anything. Tried the APX FLASH and it says complete but still cant do anything.
Says all drivers are installed. It lists apx mode but when I do ADB it doesnt list any devices. Also never lists anything in device manager.

blueis300 said:
I tried the PBJ upgrade and my CPUID said it was fine but sat at install and never did anything. Tried the APX FLASH and it says complete but still cant do anything.
Says all drivers are installed. It lists apx mode but when I do ADB it doesnt list any devices. Also never lists anything in device manager.
Click to expand...
Click to collapse
with the euu . did u keep tab disconnected till u got the 'cant detect yr iconia tab screen" then button combo into apex mode?

There seem to be some problem with (64 bit os) try using 32 bit windows....
-Tested over windows 7 32 bit no problem
-Tested over windows 7 64 bit no problem
Double check your cpuid in the folder the file called CPUID.txt inside EUUs_SBK_Acer_A500_1.016.05_COM_GEN1 folder
make sure it match or else youll get invalid cpuid error
make sure your cpuid in in cpuid.txt is written like this 0x0YOUROWNCPUIDGOES HERE example 0x037c624942c11318
and also when entering it in PBJ20upgrade add a 0
example 037c624942c11318
if you need more help pm me

have you tried the new apx flash updater and a500 manager from blackthunder? it lets you go into recovery from your pc and you can flash a new recovery and bootloader ...very easily i think your on the locked bootloader thats why you cant get into recovery like i was,. i installed a PATCHED UNLOCKED bootloader and now everything is cool
its in civato's guide page you can use this guide to flash a unlocked one, (v4+)
http://forum.xda-developers.com/showthread.php?t=1622425
make sure u have a backup and your cpuid!!!!
Optional A500MANAGER
What does it do :
· One-click APX Mode entry
· One-click Recovery Mode entry
· One-click fastboot entry for patched bootloaders
· Instant logcat viewer
· Instant dmesg Viewer
· Function which dumps the dmesg to a text file on the desktop
· Serial number extraction to make SBK calculation exponentially easier
· Links to ICS Root, A500 APX Flash Tool and two download links (Acer and my mirror) for USB Drivers
· Shows what mode the tablet is in at the bottom

Spaces?
Does the SBK extracted from the CPUID need to be entered without spaces?
chismay said:
have you tried the new apx flash updater and a500 manager from blackthunder? it lets you go into recovery from your pc and you can flash a new recovery and bootloader ...very easily i think your on the locked bootloader thats why you cant get into recovery like i was,. i installed a PATCHED UNLOCKED bootloader and now everything is cool
its in civato's guide page you can use this guide to flash a unlocked one, (v4+)
http://forum.xda-developers.com/showthread.php?t=1622425
make sure u have a backup and your cpuid!!!!
Optional A500MANAGER
What does it do :
· One-click APX Mode entry
· One-click Recovery Mode entry
· One-click fastboot entry for patched bootloaders
· Instant logcat viewer
· Instant dmesg Viewer
· Function which dumps the dmesg to a text file on the desktop
· Serial number extraction to make SBK calculation exponentially easier
· Links to ICS Root, A500 APX Flash Tool and two download links (Acer and my mirror) for USB Drivers
· Shows what mode the tablet is in at the bottom
Click to expand...
Click to collapse

4 sets of numbers beginning with 0x a space only between each set....make sense?
Sent from my GT-I9300 using Tapatalk 2

Link
please add new link to Ubuntu image . I can't download it

recovery verified failed FIX explained
ggt91160 said:
Good news!!
Succeed with blackthund3r_A500_APX_Flash_Tool_v0.3-V3BL-CWM
and
first recovery_thor17_403... but black screen...
so with V3-APX-PACKAGES
Click to expand...
Click to collapse
*******************
What he implies is:
1. He used the Manual Modem to Goto APX First Black screen. [ instructions can be got from: blackthund3r_A500_APX_Flash_Tool_v0.3-V3BL-CWM tool under Manual Mode]
2. Then he Used/Resumed with the blackthund3r_A500_APX_Flash_Tool_v0.3-V3BL-CWM, tool under the Automatic Enter APX Mode, till he got APX logo.
3. Went to Bundles and selected recovery_thor There is Option 17. This is First Step when RUNNING blackthund3r_A500_APX_Flash_Tool_v0.3-V3BL-CWM.
4. Then finally Recovery is flashed Perfectly. So u can install any custom ROM.

[GUIDE] Fix a bootloop on a rooted Zenfone 2

Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:

i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!

Worked! Thanks!
Thank you so much! :good:
It worked for me. Although I had to clear cache and dalvik cache before installing the zip, otherwise my phone would reboot into fastboot when trying to flash the zip.
And best of all: I didn't loose any data!! Just had to root again using method 3 and install busybox.
I edited my build.prop because on the Amazon App Store there is an app (Navigon Europe) that can't be installed because Amazon says my device would be incompatible which it isn't because the Play Store says it's fine. Anyway, upon rebooting I was stuck at the splash screen. Luckily I was still able to get into fastboot...
Thanks again!

Still doesnt boot up
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance

pozum said:
Hi! Thank you for your guide! I ran into a bit of a problem, maybe you will be able to help me out.
I by mistake did an OTA update while rooted, and my phone is now stuck on ASUS logo. I tried to flash different roms from external SD card, but even though they install correctly, phone still does not boot....
Fastboot gives me "permission" problem, ADB says device not found....
Any help would be greatly appreciated, because I am about to give up and go buy another phone.
Thanks a lot in advance
Click to expand...
Click to collapse
Tried other usb ports and cables? do you have all necessary drivers?

ElmirBuljubasic said:
Tried other usb ports and cables? do you have all necessary drivers?
Click to expand...
Click to collapse
yes and yes, different ports, different cables, 2 different computers - nothing... thanks

Same problem
I'm having the exact same issue as Pozum. ADB won't detect device. It won't boot. Is it completely bricked or can I do something?

try flashing full rom from SD card, rename it so that it can be recognized.
Sent from my ASUS_Z00AD using Tapatalk

luisoman2000 said:
try flashing full rom from SD card, rename it so that it can be recognized.
Click to expand...
Click to collapse
I have the stock android recovery utility. It doesn't give an option to flash/install anything. Or am I missing something?

Help
hello ...i recently rooted rooted my zenfone 2 and deleted the bloatware . I have and app call kingroot which i used to uninstall those apps ... this app also has a thing called Purify . i used it and it told me to restart and so i did . now the phone is stuck in bootloop . This is the 1st time I've restarted after rooting . Will your process work on mine ? Thanks in advance

I think yes, try it

Mael_RadecFR said:
Hello guys,
Here a easy way to fix a bootloop on your rooted Zenfone 2, if you make the error of apply an OTA while being rooted for example.
The only inconvenient of this method is that you will lost your internal data (like SMS, apps, downloads... But not your photos if they were in your SD Card). Another thing, you must have enabled the USB debugging before.
PS : I’m French sorry if my English is not perfect
Step 1
In your Zenfone 2, verify that you can go in fastboot mode : power off your Zenfone. Then, press the Power-On button until the phones vibrates twice. Release it, then go press the Volume+ button until this screen appears :
View attachment 3458839
If that works, connect your Zenfone to your PC.
Step 2
Now go in Asus Website for download the most recent stock ROM of your Zenfone 2 (size : around 1.1 Go) :
ZE551ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
ZE550ML : https://www.asus.com/fr/Phones/ZenFone_2_ZE550ML/HelpDesk_Download/
ZE550CL : http://www.asus.com/fr/Phones/ZenFone_2_ZE500CL/HelpDesk_Download/
Remove the SD Card of your phone and copy it the zip, you can do it after if your connection is slow.
Step 2.5
I’m not sure if this is mandatory but do it by prevention : install “15 Seconds ADB Installer” : here a guide for intall it :
http://forum.xda-developers.com/showthread.php?t=2588979
Step 3
When this is done, download the folder named : “CWM_Zenfone_2_Intel.zip” :
https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2
Extract the files, then open the folder :
View attachment 3458828
Step 4
Run “cai_dat_CWM.bat”
Type “ACCEPT” in the command window, in capitals, then press Enter.
View attachment 3458829
Then, if your Zenfone 2 is connect to your PC in fastboot mode and if the script is blue, that’s perfect !
View attachment 3458830
Type “T4”, press Enter, and normally something like this will happen in your Zenfone 2 :
View attachment 3458840
Step 5
Shortly after, your Zenfone will reboot in CWM Recovery Mode
View attachment 3458841
With the buttons, go in :
Install zip > choose zip from external sd card > *name of the stock ROM* > Yes, install
When the installation is done, reboot your device, and normally the bootloop will be fixed ! CONGRATULATIONS :good: :victory:
Click to expand...
Click to collapse
Why in the **** did you link the french site to this?

This does not work because when the phone is bricked the SD card is not mountable.

Thanks the solution is jst perfect BUT AFTER UPDATE TOUCH PANEL DONT WORK

QA88 said:
Hello buddy,
I really need your help. I rooted my Asus with your method. But at that time you had not post CWM Recovery. Unfortunately, my nephew play with my Asus then he touch update OTA. Finally My device being stuck on Asus logo, while it doesn't have CWM Recovery.
Could you please give guidance
Click to expand...
Click to collapse
I brought you here, check on first post, hope it help. Good luck

Hi there, hope there's a chance of a reply !
So I've got the blinking Android robot with red explanation mark! and I'd just like to know how long it takes for the phone to reload after installation?
Its stuck on the Asus boot up screen with the loading symbol under it !

I did the same thng.
chetank08 said:
i tried to wiped cache in recovery mode but before it completes i restarted the phone
so now when i start my phone it just blinks error bot and even when i select recovery mode same thing happens
i also tried to solve it with ADB method but it do not detect my phone
PLZ HEPL ASAP!
Click to expand...
Click to collapse
Hello. I believe I did the same exact thing . Did you by chance ever get back into Recover y mode or get the PC to recognize your phone. I'm a total novice with this, and very lost. Thank you.

Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1

i was hope ... but
Hi! there.
i spend last to days literelly trying to fix my zf2 ZE551ml, it gets frozen when i wipe cache so i force power off... what a mistake.
i was trying to fix it, and i got it worst. i think i erase recovery menu, so i can't adb sideload, fastboot saids that can not load image system.img, asus flash tool said "flash image failure (failed with error #1), xFSTK works to bring fastboot menu, but since i don't have the file to put on OS dns space, it didn't work, but, after hours and hours, in my last try of a long nigth, i did this guide.
when i see a cwm icon, i can't believe it!! almost made my entire two days, but suddenly, it was all sad, when i tried to install from external sd card it says that there is an error. And the problem still there. here is an option to install zip by sideload, but in de pc said not device detectec.
i really don't know what to do, i'm really tired, and my options are getting over...
any ideas??
Thank you all!!

maciek90 said:
Yesterday I did it too. Follow this guide http://valuestuffz.blogspot.com/201...uck-in-recovery-wipe-cache-partition.html?m=1
Click to expand...
Click to collapse
Thank you for suggesting this guide! It did help me to get back into the recovery mode, however, after following the steps within the guide very diligently. I am still unable to get past the initial loading screen. . I received the permissions denied error just as the post suggested I would. I wiped the cache partition at the end of following the steps as suggested. Still. It will not load to the Welcome screen .

Flashing Stock Rom Via SP Flash Tool[Lenovo A7000]

PART-A
1.Download Stock Rom
-------------------------For Marshmallow:-click here
-------------------------For Lolipop:-click here
2.Installing driver (included in ROM package).
3.Then copy and extract Stock Rom package in pc.
4.ENABLE USB DEBUGGING
Go to Settings>> About>> Build number and tap it 7 times to unlock Developer options. Then return to Settings>> Developer options and tick the USB Debugging option.
PART-B
INSTALL STOCK ROM ON LENOVO A7000 ROW VERSION
NOTE: Before doing this process make sure you have backup of contacts, SMS, call log or files in internal memory. As it will format your whole phone.
1. Charge your phone up to 80% and disable all those firewalls or antivirus on your PC.
2. Run as Administrator the flash_tool.exe, that you will find in the stock rom package.
3. Click on “Scatter-loading” and browse the scatter fileMT6752_Android_scatter.txt,you will find this in target_bin folder inside the A7000-a_S223_160000_ROW folder.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum.
5. Now choose the "Download only" option like this
6. Now hit the Green Download button
7. Now turn off the phone and remove the battery for at least 5 seconds, then put the battery back.
8. Connect your Phone to PC via USB, this will start the flashing process.( if the flashing not started then you are having some driver or connectivity problem)
9. Once the process has completed, we will see a huge green check box.
10. Now we can disconnect the phone from the cable.
Now switch on your phone, it will take 6-10 minutes for first boot.
11. You have successfully installed the stock ROM or Official ROM on Lenovo A7000 ROW version.

PrashantRana said:
PART-A
1.Download latest stock rom.click here
2.Downloading and installing driver click here
3.Downloading SP flash tool click here
Then copy and extract Stock Rom and SP flash tool in your PC.
4.ENABLE USB DEBUGGING
Go to Settings>> About>> Build number and tap it 7 times to unlock Developer options. Then return to Settings>> Developer options and tick the USB Debugging option.
PART-B
INSTALL STOCK ROM ON LENOVO A7000 ROW VERSION
NOTE: Before doing this process make sure you have backup of contacts, SMS, call log or files in internal memory. As it will format your whole phone.
1. Charge your phone up to 80% and disable all those firewalls or antivirus on your PC.
2. Run as Administrator the flash_tool.exe, that you will find by extracting SP_Flash_Tool_v5.1604.zip.
3. Click on “Scatter-loading” and browse the scatter fileMT6752_Android_scatter.txt,you will find this in target_bin folder inside the A7000-a_S223_160000_ROW folder.
4.In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum.
5. Now choose the "Download only" option like this
6. Now hit the Green Download button
7. Now turn off the phone and remove the battery for at least 5 seconds, then put the battery back.
8. Connect your Phone to PC via USB, this will start the flashing process.( if the flashing not started then you are having some driver or connectivity problem)
9. Once the process has completed, we will see a huge green check box.
10. Now we can disconnect the phone from the cable.
Now switch on your phone, it will take 6-10 minutes for first boot.
11. You have successfully installed the stock ROM or Official ROM on Lenovo A7000 ROW version.
Click to expand...
Click to collapse
Thanks a lot man!!
For this.

Thanks For Sharing Your Hard Work:good::good::good:

currently flashing MM from Lollipop Stock,25% over
If I do not like stock MM, can I simply flash back the stock Lollipop ?
I have a backup of the Lollipop Rom from TWRP which is rooted and has all my apps. how do I recover from that if needed?
need to send my phone to service center so flashing this stock rom.

karthikx10 said:
currently flashing MM from Lollipop Stock,25% over
If I do not like stock MM, can I simply flash back the stock Lollipop ?
I have a backup of the Lollipop Rom from TWRP which is rooted and has all my apps. how do I recover from that if needed?
need to send my phone to service center so flashing this stock rom.
Click to expand...
Click to collapse
Yes you can also flash stock lolipop by this spflash tool method.
http://forum.xda-developers.com/lenovo-a7000/development/stock-firmware-lenovo-a7000-t3205521

PrashantRana said:
Yes you can also flash stock lolipop by this spflash tool method.
http://forum.xda-developers.com/lenovo-a7000/development/stock-firmware-lenovo-a7000-t3205521
Click to expand...
Click to collapse
flashed it..thanks MM too battery hog and unnecessary sd card issues.

PrashantRana said:
PART-A
1.Download Stock Rom
-------------------------For Marshmallow:-click here
-------------------------For Lolipop:-click here
2.Downloading and installing driver click here
3.Downloading SP flash tool click here
Then copy and extract Stock Rom and SP flash tool in your PC.
4.ENABLE USB DEBUGGING
Go to Settings>> About>> Build number and tap it 7 times to unlock Developer options. Then return to Settings>> Developer options and tick the USB Debugging option.
PART-B
INSTALL STOCK ROM ON LENOVO A7000 ROW VERSION
NOTE: Before doing this process make sure you have backup of contacts, SMS, call log or files in internal memory. As it will format your whole phone.
1. Charge your phone up to 80% and disable all those firewalls or antivirus on your PC.
2. Run as Administrator the flash_tool.exe, that you will find by extracting SP_Flash_Tool_v5.1604.zip.
3. Click on “Scatter-loading” and browse the scatter fileMT6752_Android_scatter.txt,you will find this in target_bin folder inside the A7000-a_S223_160000_ROW folder.
4.In the menu “Option” tab, go to “Download”, and put a “tick” in the “DA DL All with Checksum.
5. Now choose the "Download only" option like this
6. Now hit the Green Download button
7. Now turn off the phone and remove the battery for at least 5 seconds, then put the battery back.
8. Connect your Phone to PC via USB, this will start the flashing process.( if the flashing not started then you are having some driver or connectivity problem)
9. Once the process has completed, we will see a huge green check box.
10. Now we can disconnect the phone from the cable.
Now switch on your phone, it will take 6-10 minutes for first boot.
11. You have successfully installed the stock ROM or Official ROM on Lenovo A7000 ROW version.
Click to expand...
Click to collapse
sir...the download link u provided was not working.....please update that link

Thanks a lot very helpful

Works. But unable to connect to internet and remains in boot loop!

Please fix the links, I'd like to try the stock rom again.

heavencanwait said:
Please fix the links, I'd like to try the stock rom again.
Click to expand...
Click to collapse
Bro I find driver link not working so I have removed link as driver are included in ROM package.
If u find any problem the reply

Hi i flash the stock rom, everything okey but when i boot my phone it shows gray/white screen ... What happened? How to fix it
Im on a7000a 5.0 try to update with this 6.0 on the link of this thread...
Any help is appreciated

seferismo said:
Hi i flash the stock rom, everything okey but when i boot my phone it shows gray/white screen ... What happened? How to fix it
Im on a7000a 5.0 try to update with this 6.0 on the link of this thread...
Any help is appreciated
Click to expand...
Click to collapse
This problem occur when you do not tick the usb checksum and storage checksum in spflash tool settings.
So tick these in settings

PrashantRana said:
This problem occur when you do not tick the usb checksum and storage checksum in spflash tool settings.
So tick these in settings
Click to expand...
Click to collapse
i already tick those... thanks
whats suppose to be the problem

Hi there, i am trying to help a friend re-flash his Lenovo A7000-A phone back to stock firmware but it after reading about it, i've come to know that the phone has two types of firmware ROW-rest of the world version and one other which is probably chinese. i was wondering if that is true and where i could get the non-ROW version. your help would be much appreciated. thanks

Is there any option to update from S133 to S136 (for example) via SP Flash Tool without wipe any userdata - like OTA update?

NOT GOOD. I have downloaded the Lollipop package from the link in the first post.
1. After applying it as described, the Home and Back button stopped working! Tried eMMC factory reset and did not help.
2. The OS occupied space still reported to be 3.13 GB, exactly the same as in Marshmallow!
Now I am trying to perform OTA update back to Marshmallow to see if the buttons would work again, even though I doubt they would...
BTW, in the Flash Tool >> Options >> Download >> there was just a single checkbox available: "DA DL All with Checksum" (version v5.1436.0, DA_v7.1436.00.000, libflashtool.so vBROM_DLL_v7.1436.01).

PrashantRana
Click to expand...
Click to collapse
Hi friend, thanks for this tutorial.
I did all steps successfully, first as you said tick both options in download and done. But when I turned on phone see a Gary and white screen for a few second and then black, noting happened.
As you reply on another question like me I tried all steps but this time not tick the check box's in option. This time after turned on phone, just black screen. So again I do all steps as you said with tick in option. But again I face gray and white screen and noting loaded.
Can you help me on this ?
Tip: first time try this tutorial a face an error so I searched it and the answer was: first flash the device. So I flashed phone from flash tab in so flash tool then I tried this tutorial.
Thanks a lot for your time.

Thanks.
God Job.
No Problem.

Hi! I succesfully downgraded my phone to android 5.0 lollipop. Everything works fine except my sd card -it says my sd is corrupted but that's not true because on android 6.0 marshmallow that sd worked. I also tried different sd card but nothing changed. I even tried to format sd card but it still doesn't work. Is there some way how to fix it ?

Yoga Tab 2 8" 830f failed update led to soft lock

So I downloaded a 16mb OTA update and let the tablet do its thing without touching it. I waited for the tablet to boot up, but it was stuck in a black screen for about 12 minutes until I decided to turn it off and on. It didn't work, so I went to the recovery to do a factory reset and clear the cache, but it still didn't work. I later went to this Russian forum here from this thread. I downloaded a lollipop rom and proceeded to flash it using Phone Flash Tool Ver. 5.2. It went well until 16% in where it failed. Unfortunately, I don't have a screenshot of this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(image of the files in the rom I downloaded)
After all this happened, I tried to start it up but I got the message "Boot Failed. EFI Hard Drive. Boot Successful - Enter Setup"
And now it won't go into recovery mode, but it does go into fastboot and bios setup.
Since it does go into fastboot, I tried to use a tool from this thread (Temp recovery) to use a temporary cwm recovery to hopefully be able to at least boot into that, but that didn't end up working.
I got another rom from the same Russian site that had differently packaged files but still the same stock lollipop rom.
I tried to just use the recovery from there to manually flash it using fastboot, but it still failed.
I later found this thread with these instructions for this problem.
1. download and extract this file someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
The file he linked in his post (ionioni ) was gone but I still tried to do this with the roms I had. And guess what? It still didn't work. The instructions said to place the tablet in DNX mode (meaning fastboot), which I did do...only when I put it into fastboot, it was set to DNX_OS which came to say "Wrong device state" in Phone Flash Tool.
I've tried what I could, but failed. Anyone have any suggestions?

AgentXGhost said:
So I downloaded a 16mb OTA update and let the tablet do its thing without touching it. I waited for the tablet to boot up, but it was stuck in a black screen for about 12 minutes until I decided to turn it off and on. It didn't work, so I went to the recovery to do a factory reset and clear the cache, but it still didn't work. I later went to this Russian forum here from this thread. I downloaded a lollipop rom and proceeded to flash it using Phone Flash Tool Ver. 5.2. It went well until 16% in where it failed. Unfortunately, I don't have a screenshot of this.
(image of the files in the rom I downloaded)
After all this happened, I tried to start it up but I got the message "Boot Failed. EFI Hard Drive. Boot Successful - Enter Setup"
And now it won't go into recovery mode, but it does go into fastboot and bios setup.
Since it does go into fastboot, I tried to use a tool from this thread (Temp recovery) to use a temporary cwm recovery to hopefully be able to at least boot into that, but that didn't end up working.
I got another rom from the same Russian site that had differently packaged files but still the same stock lollipop rom.
I tried to just use the recovery from there to manually flash it using fastboot, but it still failed.
I later found this thread with these instructions for this problem.
The file he linked in his post (ionioni ) was gone but I still tried to do this with the roms I had. And guess what? It still didn't work. The instructions said to place the tablet in DNX mode (meaning fastboot), which I did do...only when I put it into fastboot, it was set to DNX_OS which came to say "Wrong device state" in Phone Flash Tool.
I've tried what I could, but failed. Anyone have any suggestions?
Click to expand...
Click to collapse
This is the file you need https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view
And this https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
Ignore the oops error warning, it's something to do with what G drive can scan.

Holy Sh!t. this just absolutely worked!! I didn't think I could bring this thing back to life, but the files you linked just did it! Really, I don't know how to thank you enough for this.

corasman said:
This is the file you need https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view
And this https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
Ignore the oops error warning, it's something to do with what G drive can scan.
Click to expand...
Click to collapse
Hi folks,
had the exact same issue and indeed the 1st link offered (https://drive.google.com/file/d/0B1LaMEhefCBgYzNTOUxJZmtWQ0E/view) worked like a charm.
The second link is to download the "Intel platform flash tool lite", but I used my existing version of the Intel Phone Flash Tool (5.2.1-0) which worked fine with the image.
In other words, Corasman, it appears you have saved 2 people's life (or at least tablets) with your solution, so Thanks ! :good:
Regards.

Make that 3 people! Thank you so much corasman - your post has finally fixed my yoga 2 tablet, which I was sure would be going in the bin. Can't overstate how grateful I am - Cheers!

update 830f with 1050f rom?
updating 830f with 1050 rom? does it work?

hello. I have the same problem. I update OTA to lolipop. Since the table is slow, i tried flashing some ROM (which i cannot recall) and the tablet stopped working. Now, I am trying to flash the link you provided and it succeed. However after that i get blank Screen. what Could be wrong. My table is YT2 830LC. Please help

I am typing this all over again after my full report vanished. Do not have the patience of typing all that again. Suffice to say I had a similar situation with the boot failed EFI Hard Drive. Boot Successful - Enter Setup" message on my 830LC.
I had even found the bios restore tool for moving back from lollipop to kitkat but it too would hang. And attempts to flash lollipop would fail immediately with the same message as the OP, wrong device state.
So, in spite of it seeming completely counter-intuitive, I flashed the 1050F rom in the link shared by Corasman. Strange as it may seem, my tablet is now alive and working. No calling function, but it is working and calling itself a 1050F.
Now my research has to shift to whether the 830 LC rom can be flashed now.

i have a same problem with yoga 2 pro 1380f mr corasmancan help me

prabuddhadg said:
I am typing this all over again after my full report vanished. Do not have the patience of typing all that again. Suffice to say I had a similar situation with the boot failed EFI Hard Drive. Boot Successful - Enter Setup" message on my 830LC.
I had even found the bios restore tool for moving back from lollipop to kitkat but it too would hang. And attempts to flash lollipop would fail immediately with the same message as the OP, wrong device state.
So, in spite of it seeming completely counter-intuitive, I flashed the 1050F rom in the link shared by Corasman. Strange as it may seem, my tablet is now alive and working. No calling function, but it is working and calling itself a 1050F.
Now my research has to shift to whether the 830 LC rom can be flashed now.
Click to expand...
Click to collapse
i have same problem with my yoga 830lc this rom not work help me to run my tab agian
---------- Post added at 10:55 AM ---------- Previous post was at 10:47 AM ----------
corasman said:
This is the file you need
And this
Ignore the oops error warning, it's something to do with what G drive can scan.
Click to expand...
Click to collapse
hy sir downlod the rom from google drive but unable to download 2nd link (link not working)
i use latest intel flas tool light but the rom no flash to my device its show errors. plese sir help me to run my tab again

oneplus 6T stuck on fastboot bootloop

hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:

ritork said:
hi team, i just bought a new oneplus 6T from china with Hydrogen OS, i changed it to Oxygen OS
but somehow it erased completly and stuck on fastboot bootloop, no bootloader, no recovery no system
i tried MsmdownloadTooln the laptop reconizes the phone but the operation stuck also on "param preprocessing"
please any help i would be greatful :crying::crying:
Click to expand...
Click to collapse
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/

Ethos001 said:
Hey there I recently had the same problem with a OnePlus 6T... What I did was I installed everything manually using the ADB tools, in fastboot mode. Everything worked fine afterwards. Follow this guide, it will hopefully help.(It helped me ;D)
https://www.google.com/amp/s/forum....-stock-fastboot-roms-oneplus-6t-t3862516/amp/
Click to expand...
Click to collapse
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ritork said:
thanks for ur respond
i did this command "flash-all-partitions" but it showed me only "failed respond"
Click to expand...
Click to collapse
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:

Ethos001 said:
Make sure to have unzipped the compressed android file from the guide(whichever you decided to donwload) in the same folder as your ADB and Fastboot tools.
If it is still not working... try to manually flash everything in fastboot mode, that is what I did...
Download the latest version of android pie provided in the link from the guide( Google drive or Android Filehost), and then make sure to unzip the compressed file in the same folder where you installed your ADB and Fastboot Tool. Make sure a TWRP recovery image is in the same folder. (https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482)
Then, what you should do is to follow the guide where it says:
MANUAL FLASH: Windows - OSX - Linux
Get back to me after you finished. Read twice, execute once :good:
Click to expand...
Click to collapse
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate

ritork said:
Thanks a lot my friend
It works now after the second try
Thank u very much .. i really apreciate ur support mate
Click to expand...
Click to collapse
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Thanks again mate <3

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?

HackerGames197 said:
Hey, i want to flash oxygenos on my chinese variant with hydrogenos. could you help me with the installation in order to avoid this kind of problems(bootloop,brick etc.)?
Click to expand...
Click to collapse
PM me

Gracie mille !!! First brick and i hope never again but you where there.. Huge thanks.

Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.

bigmikey307 said:
Download the TOOL ALL IN ONE and if it says fastboot device connected, I think you'll be fine. Make sure right below that you choose OnePlus 6T. Then just download and flash the full rom and it fixed mine, I had the same problem.
Click to expand...
Click to collapse
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.

Micheal86 said:
Thanks a lot.
Would you share the link of the TOOL ALL IN ONE?
I also have the same bootloop issue.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Hope this helps

I have the same problem
PLeaseeee help me I have a rooted oneplus 6t. I performed a backup and wipe in hope to clear a problem and am now stuck in fastboot mode. Im pretty sure as I tried to reboot it said no os detected, and then I got stuck. I have tried to install the latest oxygen os by manualling flashing 4 files. all tutorials i read have bootloader and other files while i just have - system_matrix , system_manifest , vendor_matrix, vendor_menifest (XML files by the way). I have flashed these files and rebooted only to go back to the fastboot screen.

Ethos001 said:
Hey bud you are welcome ;P
I know how frustrating it was, as I have been in the exact same situation... Took me like 4 hours to figure it out ;D
Glad to help
Click to expand...
Click to collapse
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing ?
And my bootloader is also locked how can i solve this problem pls help me

For anyone running into a similar problem these are the steps I used
1. Download and extract files
a. Qualcomm drivers
b. MSM Oneplus 6t download Tool
2. Disable Driver Signature Enforcement by restarting your pc whilst holding shift, Choose trouble shoot, then going into more recovery ,select Advanced Options > Startup Settings > and then click on Restart.
3. Now PC will restart and Now you will see a list of startup settings that you can change. Select option 7 ‘Disable Driver Signature Enforcement’ by clicking f7
4. Now switch off your phone (by navigating through fast boot options)
5. While switched off hold both vol up + down for 5secs before connecting to your pc. *Your pc should recognise a phone is connected however nothing will be displayed on your phone*
6. Open device manager from start- Under Other devices there should be your phone (although it will be called smthn else), right click that and select update drivers
7. Browse computer for driver software and select folder with extracted QUALCOMM drivers (for me it was called unbrick).
8. The open the MSM application (run as admin tho) it should say device connected
9. Press start and you download should start- if error occurs or download stops unplug, power on, power off and the plug it again, now it should be fine.
10. Wait for download to finish and then your phone should be rebooted
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
mohitgaba14 said:
Bro please help me I didn't not much about this things but ill do flashing and customisation i bricked my Oneplus 6t its stuck on bootloader ill try msm tool also its shows param preprocessing
And my bootloader is also locked how can i solve this problem pls help me
Click to expand...
Click to collapse
Look at the post above