Install Magisk - Sprint Samsung Galaxy S7 Questions & Answers

Hi,
I have tried to install Magisk on my rooted Sprint S7 a few times now, and each time the phone gets bricked. The first time, I flashed the magisk zip with FlashFire, and the second time, I used the Magisk Manager app to do the installation. Both times, the phone booted into a blue screen saying something to the effect of unsafe software being flashed and for security purposes the phone is locked up. I am new to Magisk and I am not quite sure what I am doing wrong. The goal in installing Magisk is to be able to use xposed features of Greenify, which I cannot use because the PurifyOS version of xposed is not compatible with the greenify module. Can anyone please help?

Magisk is a systemless root which can not be used on locked bootloaders

Related

7.1.1 Bootlop when flashing magisk/phh SU

Updated to 7.1.1 Beta. Flashed twrp. I then flashed magisk and then phh. I get stuck in a boot lop. I tried twice but each time I keep getting stuck in a bootloop. Does anyone have a work around? I've looked around and seems like everyone is getting it to work but me and a few others? Any help?
Not sure why you want magisk if xposed isn't supported on 7.0+ ? Just use superSU instead.
Edit: There is a (no longer a) benefit in using Magisk/phh, since magisk hide and using xpropset magisk module is detected by SafetyNet already, but see post below for the latest approach (if any):
http://forum.xda-developers.com/nexus-6/help/help-pass-safetynet-rooted-7-0-aosp-t3486834
suhide is not compatible w/ 7.1.1, so SuperSU is not an option for the 6P on the 7.1.1 Developer Preview
Flash magisk and phh su, works fine, but supersu get bootloop, something like this
7.1.1 with supersu (stable or sr1) boots fine, the problem atm is suhide, flashing suhide causes bootloops
Way possible, but without suhide is not very convenient, banks apps not working properly
So the latest superuser by chain fire works? Cause flashing magisk v8 then phh su just sends me to a bootloop.
I'm using magisk and the latest phh su on 7.1.1 and no issues what so ever even have it passing safetynet
All I did was flash the factory image, then two, then flashed phh su, magisk and then rebooted and installed xsetprop through magisk.
how are you getting this working? I haven't tested, but doesn't the 7.1.1 need a custom kernel to bypass safetynet? Kernel source isn;t out yet?

Xposed Framework installation bricked Mediapad M3

hello everybody,
I bought the Huawei Mediapad M3, I unlock it’s boot loader and installing a new custom Recovery (Greatslon mod) and then flash SU, so the tablet has been correctly routed and everything worked perfectly.
Hounever I think: if you routed your device without install Xposed Framework , you don’t have many many important functions.
Later, I wanted to also install Xposed Framework, I followed the instructions for Marshmallow 6.0 provided by rovo89
but unfortunately when I reboot my M3 it going boot loops, I restored the system with the prior backup
and tried again with apk Xposed , but still the same boot loops, maybe there is something wrong in that Xposed.
Is there anyone who has found a solution to install Xposed Framerwork on Mediapad M3.
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
I think it is not important how one rooted marshmallow if after everything works fine, but also i used
xposed v87 from there, and the result is boot loops, maybe it work well on other devices while on huawei mediapad m3 is not good
what I am trying to say is use the systemless xposed and it will work.
trd_jzx100 said:
what I am trying to say is use the systemless xposed and it will work.
Click to expand...
Click to collapse
thanks for your help, i will first try installing the Magisk interface, in order to install systemless Xposed with Magisk, and then i'll write the result
i flash Magisk , reboot the device, then i installed MagicManager.apk so i use MagicManager.apk to download and install automatically the right version of systemless Xposed framework, but when the device does the boot loader goes into the boot loop, i do not know what to do yet to run the xposed framework on my mediapad m3, i went crazy i never had trouble with various smartphones, i never had a tablet, damn the day i bought it, now i reset it to factory, and then i would like to make a final test before breaking it, do you can kindly list the various steps in the details you've been following, thank you in advance
well I am not sure then why your getting boot loops. so you have installedmagiskv12-then,magisk,manager and then go to module and flash the downloaded v87 framework there
link for v87 systemless frameworkhere
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268.
then after that install this it should be working but dont update to v87.1 or your fingerprint sensor might play up
link for the xposed apk
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
thanks trd_jzx100,
at this time i brought my tablet back to the factory, before starting a new rooting procedure + installing xposed i would still have two questions:
1) after you made the unlock, which TWRP you installed to flash magisk?
2) i see from the link you posted that the xposed file you used is xposed-v87.0-sdk23-topjohnwu.zip instead i used xposed-v87-sdk23-arm64.zip maybe that was also a problem
later if all goes well, i will write the synthesis of the entire step-by-step procedure for the benefit of all mediapad m3 owners who want to do the same thing with no problems
finally xposed works, i used the system less rooting and then installed xposed v87 by topjohnwu,
now i have a issue with the xprivacy module but this is another story
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
Did you re-install when you got Nougat??? If so, can you help me out?

I am rooted, but not happy with my current state

Hey everyone,
I`m running LineageOS on my phone and am rooted using SuperSU which seems to work, according to Rootchecker and the feww apps I use, which make use of root privileges.
But I`m not entirely happy with my current situation, since it seems that more and more apps don`t tend to work with my rooted phone. So what are my ways out of this?
Can I easily unroot my phone, while keeping LineageOS?
Is there a working alternative to SuperSU, which would enable me to stay rooted on LineageOS without reflashing the OS and use Banking-Apps?
I`ve heard of Magisk, but I am unsure of how to switch over from my current state and I`am not sure whether or not it would solve my problems
Thanks for any help in advance!!
Magisk
You just have to go to SuperSU, then Full Unroot, then download Magisk 13.3 and flash it from TWRP. After that you should have Magisk Manager, if for some weird reason you don't, install it via apk
Then you just go to the settings, tick MagiskHide, then go back and open the side panel, MagiskHide - select the apps that you want Magisk to hide itself from
So I tried to do what you said.
I did the full unroot in the SuperSu App,
My phone rebooted
I shut it down again and booted into recovery
Tried flashing Magisk
But it failed, apparently due to my Boot image being patched by another program and told me to go with stock image
What do I do now? And will I lose any data by doing so? Thank you so much for any help!
Weird, but you can simply dirty flash LineageOS (the same one that you have now, or an update, doesn't matter) and it should let you install Magisk.
I did what you said and installed a delta update using LineageOS Downloader. Had to manually flash it in TWRP since I had no root permissions anymore. But I was able to install Magisk like a charm! Now I have to questions:
1. How do I update Magisk? Using the app?
2. Do I have to flash it again everytime I'm updating LOS?
Thanks for the great help so far!
And what exactly are those moduls? Should I be messing with them?
If updates come they will appear on the status bar and you can download them, and they'll install with the phone on. after that you have to (not quick) reboot your phone.
and about the modules, seriously? what do you think??

Magisk hell resolved??!!!!!!!??!!!!!!!!!!??

im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR
works for me without problems after last 2 years on any Rom.
dont know what you doing wrong?!
I cant get to bypass safetynet V: other than that root works fine
J0nhy said:
I cant get to bypass safetynet V: other than that root works fine
Click to expand...
Click to collapse
this actually fixed sn for me without the fix installed
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
desu1337 said:
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
Click to expand...
Click to collapse
Maybe on stock roms...it should work on l8r versions tho...
try this already https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
also cant have xposed installed with the sn fix

Tried manually flashing firmware with fastboot and now no system

Ok so I've been having a hell of a time with this phone so far. I have the boost mobile variant (xt1766). I unlocked the bootloader, installed twrp, but forgot to make a backup before flashing supersu, after which my phone would no longer boot so I flashed lineageOS. It booted up fine but I had no 3g connection so I wanted to go back to stock. I downloaded the stock firmware, but couldn't get RSD lite to install on my computer so I extracted all the files and flashed them manually with fastboot. After that my phone wouldnt boot and TWRP couldnt mount the data partition so I couldnt restore my lineage backups. I had to format the data partition in order to restore from backup but now I have nothing on internal storage, and my phone wont boot into system unless I boot into factory mode from the bootloader. It boots up fine in factory mode but now I have no network connection, no service whatsoever.
Under sim status it says Network: unknown, cellular network type: unknown, Service state: Radio Off, etc. I tried manually turning the radio on but that didn't work. I really just want to go back to stock but I don't understand how to accomplish this. I flashed everything in the firmware package in the correct order, and somehow it just rendered my phone useless. any help would be much appreciated. I've tried just about everything and I'm at a loss here.
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
AMShiech said:
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
Not "lame" unless that's the latest descriptor for a reliable, fully functional, device optimized ROM that just works. If you want additional bling/tweaks flash Xposed framework and a few well regarded modules like GravityBox.
Alternatively, you can cycle through the various custom ROMs and decide which suite of compromises you're willing to live with. Suggest a careful read of the relevant ROM thread before diving in. Be sure to backup what works (including stock!) and store those nandroids on a SD card and/or off-device.
Good luck.
AMShiech said:
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
madbat99 said:
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
Click to expand...
Click to collapse
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
No, regular Xposed. Wipe cache and dalvik, and wait. Let it sit 5 - 10 minutes. It has to optimize everything. Make sure it's the arm build. It works fine, just gotta let it sit. First boot takes a good bit.
Or use magisk, and install Xposed through that.
Do not use that old purity crap. That's why the links are dead. It's old crap. Xposed works fine with no extra steps or messing with selinux.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
That's BS; don't overcomplicate things. Xposed framework installs fine in enforcing mode. Make sure you have the correct framework for Android 7.1 (SDK 25) and your hardware (arm). You will also need the corresponding management app. There is no need to wipe anything before/after flashing the framework although doing so can't hurt. First boot will take awhile; patience is a virtue.
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
AMShiech said:
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
Click to expand...
Click to collapse
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
madbat99 said:
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
Also I certainly hope that's not the app I think it is (the smiley face)? You're not allowed to promote or speak of that "warez" here. So screenshot is not a great idea.
Click to expand...
Click to collapse
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. Ive tried installing it with TWRP a couple times with no success. As far as PoGo I've actually never even played that game. Was just curious about it.
And I'm not sure what app you're referring to but that "wow" face is a chrome shortcut. Changed it cuz I didn't like the default grey square.
AMShiech said:
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. As far as PoGo I've actually never even played that game. Was just curious about it.
Click to expand...
Click to collapse
Trend continues; reread post you're disparaging. Or module OP. f2fs loopback 'fix' gets flashed in twrp or via fastboot (for the adventurous).
I edited my post shortly after your quote. Tried installing with TWRP more than once. Doesn't show up in magisk modules.
Just flashed with fastboot and now it seems to have worked. Fastboot for the win.
Maybe all caps will help out
go inside magisk manager> downloads search F2FS LOOPBACK BUG WORKAROUND, FLASH INSIDE TWRP!!! WILL NOT WORK IF ATTEMPTED TO FLASH THROUGH MAGISK MANAGER!!!!

Categories

Resources