Hi all!
Yesterday i tried to update my twrp to a new version. I flashed it in twrp and everyting went well i thought.
So when the phone rebooted i get a second of a red blinking light then a black screen. So i restarted it again and it get in to the phone. I downloaded twrp from the offical app in playstore and tried to flash it from there. Same thing, a second of a red light that blinked then the black screen.
So now i have tried to get he phone in fastboot mode and my phone response to the adb commando, adb reboot bootloader and the phone reboots but then again it just reboots to my ROM again. I cant reboot to the bootloader mode.
I have installed all the drivers that is necesarry, but still it dosent work. Also, i have tried to flash the twrp file in adb toolkit for my Axon 7.
What can i do?
EDIT:
Its solved! I downloaded another twrp file, a older version then i got twrp back
Related
Hey guys I was trying to flash MIUI 8 on my a6000 lenovo. Bear with me because I'm new to this so I might have screwed up.
Rooted and installed TWRP perfectly. Phone was running kitkat.
I then, through TWRP tried to flash MIUI 8 from http://forum.xda-developers.com/lenovo-a6000/development/rom-miui-7-lenovo-a6000-a6000-t3355692
After first swiping right to install the zip, i got an "error executing binary in zip" error. Wiped dalvik,etc. again and tried again and then I got a MD5 file not found "warning". It was not in red letters and after that message there was no progress bar or anything and the phone just stopped responding. I assumed it wasn't working and few minutes later took the battery out. After trying to boot again it would give me the "mi.com" boot screen (not the default lenovo I used to get) and won't boot into neither recovery nor normal mode. (for recovery boot I'm trying holding both volume buttons and the power button at the same time. perhaps that is different now?)
I'm guessing the flashing was going on and i interrupted it. How can I fix this?
Update: It boots into MIUI now however pretty much nothing works as expected. It wont even go into settings. Recovery still seems botched and i cant boot into it.
TLDR: Recovery broken cant boot into it. Can boot into MIUI with very limited capabilities. Cannot select USB debugging and "adb devices" won't find the phone. What can I do?
Alright nevermind guys I managed to fix it. for anyone wondering or having the same issue, i tried many things but what I think worked is this:
Turnt on my phone in fastboot mode (hold volume - and power button) , connected it to the computer and used command "fastboot flash recovery recovery.img" to flash the old TWRP i had on my computer. After that I managed to boot my phone in recovery mode and reflash the rom properly. The weird thing is, my phone could not be recognized by the computer and "adb devices" gave me nothing back so I thought using any fastboot command wouldn't work. Oddly, it did and it flashed TWRP back into my phone.
Hey there.
I've really f*cked up the Huawei P8 Lite of a friend, when trying to root it with CWM and Supersu package.
He once tried it himself, but that ended up with a new paperweight and he got a new one from the seller.
The old one could boot to TWRP, but ended up with a bootloop when trying to install supersu.
The new one can't even get into TWRP or CWM! Yes, both devices were OEM-Unlocked.
The new one shows a blank screen right after booting to recovery, but i was able to get to system and fastboot.
But after installing CWM (because TWRP didn't work either) it just goes blank after oem logo and adb tells me it is in recovery mode!
Code:
C:\Windowws\System32>adb devices
List of devices attached
W3D7N------------- recovery
So every time i try to power the phone on, it boots straight to recovery and same outcome on adb.
It is possible to reboot it with adb in recovery but it does nothing. Just goes to recovery.
Cant get into fastboot either. Adb on system not possible and key combination (tried VolUp+PWR VolDown+PWR and VolUp+VolDown+PWR).
I don't know..
Have i made a second brick? Am I screwed?
Because i don't know if the seller will give my friend a new one AGAIN...
Have i f*cked up?
Please Help!
UPDATE:
I played a bit around with the adb/recovery and i rebooted it somehow into a mysterious mode...
It showed up as "Red is the Red" in chinese symbols in the device manager..
That is quite mysterious and a lil bit scary... I wasnt able to do anything, tried drivers but no response in fastboot/adb
UPDATE II:
THANK GOD!!!
I somehow got it right with adb reboot bootloader!
You don't know how glad i am
So i would say: SOLVED!
How did you get it back to fastboot?
amageek said:
How did you get it back to fastboot?
Click to expand...
Click to collapse
I just kept trying with manual reboot and adb reboot and eventually it worked. :victory:
Successfully upgraded to B19 & reinstalled TWRP via EDL. Phone booted fine. Booted to TWRP & flashed SU 2.79. OK back to System. Attempted to flash TWRP 3.1 and again it just booted to black screen in Recovery (same issue in B15). Reflashed TWRP via EDL and booted OK to recovery to flash SU 2.79.
When attempting to reboot to System, all looked OK, but after ZTE screen LED blinks hard red twice and phone shuts down during 3rd blink.
Reboot to recovery is OK Restored previous B15 and get same result at reboot. Same two flashes and no charging indication when plugging in with power off. Hoping not a hardware failure.
Any idea? Thanks.
Hey, I had the same problem a couple days ago, and I eventually got stuck in permanent EDL mode. Flashing full B15 through EDL worked for me.
amphi66 said:
Successfully upgraded to B19 & reinstalled TWRP via EDL. Phone booted fine. Booted to TWRP & flashed SU 2.79. OK back to System. Attempted to flash TWRP 3.1 and again it just booted to black screen in Recovery (same issue in B15). Reflashed TWRP via EDL and booted OK to recovery to flash SU 2.79.
When attempting to reboot to System, all looked OK, but after ZTE screen LED blinks hard red twice and phone shuts down during 3rd blink.
Reboot to recovery is OK Restored previous B15 and get same result at reboot. Same two flashes and no charging indication when plugging in with power off. Hoping not a hardware failure.
Any idea? Thanks.
Click to expand...
Click to collapse
try flashing b15 twrp in edl, then reboot to recovery. flash twrp 3.1 then supersu then terminal reboot disemmcwp.
see if it changes anything.
or try installing twrp in fastboot.
Gnreux said:
Hey, I had the same problem a couple days ago, and I eventually got stuck in permanent EDL mode. Flashing full B15 through EDL worked for me.
Click to expand...
Click to collapse
That took care of it. Thank you. The non-charging had me concerned as I hadn't read of that issue!
Hello!
I just repaired the display of my OP2 and when turning it back on it went straight into bootloop. Only showed the OP Logo and android on the bottom. ADB obviously doesnt work and tried to all partitions via fastboot to get fresh start. After completely resetting I unlocked the bootloader again just to be sure. Then I tried to flash twrp 3.2.1-0. it say dtb not found error. I tried a twrp 3.0.0-0 and it said succesfully flashed but after automatically rebooting the screen just turns black. I can the into fastboot mode or into bootloop can't do anything else. I also tried the MSM8994DownloadTool.exe but it just returns into bootloop again or turns black.
Help pls
So I was installing twrp and everything went right until it didnt boot to the recovery and from then it keeps booting to lg logo and bootloader warning forever.
I know I can install the stock rom with lg up by I cannot enter download mode since the phone isnt technically turned off. Does anyoene have a solution.
It's my main phone and I literally cannot afford a phone right now.
A way to turn it off would be the solution. Battery was around 70% so it will take a long time to actually have 0%.
Update: I got to the fasboot menu from where I can run fastboot reboot recovery after installing twrp again. Now I have some mounting issues and I cannot flash any zip without entering bootloop. Im trying to use the shut down menu of twrp to try to enter download mode.
2nd Update: solved using lg up with the latest android version.