I wanted to flash stock rom using odin. i was on mokee ope source. i accidentally wiped system before flashing firmware with odin. now odin fails at half. i cant boot anymore
Edit: Nevermind i did it.
Related
So I was running along running a dandroid ROM based on 4.4 with no issues. Decided to flash Ktoonez kernel with newest 12/14/13 ROM. Went to CWM did full wipe and format /system as I usually do when install new ROM. Flashed ROM then flashed ktoonez which failed with status 0 then flashed loki and rebooted, decided to reboot instead of reinstall cause the kernel installation failure said it didnt change anything to I though I would be ok...guess not
Stuck with phone just vibrating on black screen. Can't access any recovery, only Download mode.
In download mode I flashed the STOCK ATT Rom with Odin and it said PASS but the phone is still doing the same vibrating every couple seconds on a black screen unless in DOWNLOAD mode.
Any advice would be greatly appreciated.
There's a 16 gig pit file floating around here that might help you get back into recovery after that flash the stock ROM back after you flashed the pit file.
http://forum.xda-developers.com/showthread.php?t=2323019
I think this is it I'm not too sure because instructions say flash via heimdall but there's an Odin zip somewhere in the thread.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hi, I wrote it in ROM thread but here is maybe better.
I try to install custome ROM Omega 27.So I flashed stock ROM with android 5. Everythings works but now I wanted to flash custome recovery TWRP 2.8.7.0 for my LTE ROM and wanted to flash with Odin 3.09. And it didn't worked.
I browse twrp file to AP part in Odin and start to flash but it stops on beginning and nothing happens. I had to turn off Odin and tried it 5 times. Without success.
Pls. any suggestions?
Sorry , my bad, it was samsung drivers on computer.
To cut a long story short I was on a S6 port rom and decided to try N5 port. After sometime i did not think it can be my daily driver so decided to go back to my backup. Restored my backup but my screen was always unresponsive, tried many timed but did not work.
So i decided to flash Phronesis rom, but for some reason the phone shuts down everytime i tried to clean the data, or install the new rom. I will have to take out battery again to get back to recovery. Tried multiple times but failed.
Decided to download a stock rom and flash via odin, got BRI-N9005ZSUGOH3-20150904105400 from some thread in google as stock rom and downloaded odin v3.9 and flashed with Md5 in AP. Got the error Volume size is too big 614400<712704.
I remember when i moved from kitkat we had to do something with the pit size but since i was already on lollipop didnt think it was relevant.
Can someone pls advise, what I am doing wrong.
Just to try out i am also downloading the firmware from sammobile to see if there was something wrong in the previous file.
To provide an update, I flashed the stock firmware from sammobile using odin and it passes, however i was stuck at the boot screen for about 20mins after which I gave up. Now flashing stock again using odin and see how it goes this time.
Last update
when the phone did not start up after the next stock flash as well. I went ahead and flashed twrp recovery and was able to boot into recovery after couple of tries then flashed a custom rom again. alls good now.
When flashing back to stock, a full wipe using stock recovery is sometimes required before booting the stock ROM for the first time.
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
jdhot2 said:
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
Click to expand...
Click to collapse
Just reflash TWRP. Uncheck auto-reboot in Odin before flashing.
F2FS Support
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
jdhot2 said:
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
Click to expand...
Click to collapse
Flashing a firmware will fix the issue, both for recovery and rom
Which Firmware?
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
jdhot2 said:
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
Click to expand...
Click to collapse
Flashing will return you to ext4
Because f2fs needs a special recovery files etc... and it will be replaced.
Test it out you wont lose nothing
Flash latest samsung touchwiz?
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
jdhot2 said:
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
Click to expand...
Click to collapse
Yes flashing sammy, no prob always here to help
Flashing Now
I am now flashing latest Sammy rom with latest Odin.
You're a lifesaver!
Thanks for your help much appreciated.
My phone is up and running again.
Next time if I have any issues with my s4 I'll just flash the latest Sammy rom.
Hey guys. I'm trying to update my TWRP recovery but now I get the yellow triangle when to put the phone into recovery and lock icon before booting. I'm currently running 7.1.1 octos rom. The phone can boot fine but I don't have any working recovery right now. I tried using odin to flash several tar twrps but it constantly fails. I've used several cables too and 2 pc's to rule out connection problems but still the same. I'm out of ideas right now. I don't want to go flashing back to stock rom if I can get a working recovery thru odin. Thank you....
P.S. I tried to update my TWRP supposedly to 3.1. . . as it is preferred for flashing lineage oreo rom that's when my recovery goes bad.
Try reinstalling the TWRP that was working. It seems like the new TWRP isn't too compatible with our phones on the MDL bootloader. You might have to ODIN back to stock to fix it.