Hello to all
i have been searching a few known phone's that i like but i can't seem to find a phone that has gsm 2100 mhz band is this a new band on the gsm network thier for i have to wait for them to make gsm 2100 mhz band phone
Reason being i with tmobile and the 3g i been told by tmobile rep only works for tmobile on 2100Mhz gsm band
if possible is thier away to change or reprogram your phone for the band or is this hardware in the phone
sorry i'm quite ignorant to this network tower thing but trying to learn
thanks for you help
you might as well be going from analog to digital. its normally not just a software update.! its a complete hardware change. If you look at the iphone for example it has 3 radio chips in it all for different bands!
Hi,
I've been going through a lot of posts for this, but I couldn't find a definite answer. Even though Band 40 is supported by D802's hardware(and also shown in the LTE bands in the hidden menu), used along with the Airtel 4G Sim Card(Karnataka, India), I still can't use it because it is disabled by software/firmware? Also, I can see LTE in the Network selection menu. How is it that I can see the Band for LTE(2300 Mhz) used by my carrier but can't use it??
Anybody able to explain this to me would be of great help!
Thanks!
- Amith
Never mind, I moved on to G4. On a side note, i couldn't get the 2300 Mhz band to work.
Hello. I have a Xiaomi Redmi 2 2014811 subversion which doesn't have the 850 GSM band that I need in the rural area where I live.
I have seen that the submodel 2014819 (Brazil) has this band and I would like to know if is possible to change the baseband by flashing any software.
In other words: Are submodels 2014811, 2014819 the same hardware with different radio/modem partition softwares or have they different hardwares?
I have seen that with other mobiles like Moto E 2015 is possible to change the region of the baseband by software:
http://forum.xda-developers.com/moto-e-2015/help/question-models-bands-t3163453
Thanks
I hope someone can help you with this
Hi, I'm Brazilian and got the HM2014819, as soon as I get the partition table I will upload it for you TO TRY of course after a Nandroid Backup by you. I will upload if the size match with my data plan :good:
Well, I don't know if you will can successfully flash it, and if it will work.
Going to dump the modem here in a .img that you can flash or make a flash zip
Thanks Lennoard, but I think is not a modem issue. I am on the way to Unlock the GSM bands in the Qualcomm, if it would be possible.
I have followed all the steps in
- Unlocking Basebands on MI4 (http://forum.xda-developers.com/mi-4/general/unlocking-basebands-mi4-t2879685)
- Unlock all bands of your Qualcomm device! Use your phone globally! No bs! (http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269)
- [Q & A] how can i enable qualcom diagnostic mode? SOLVED (http://en.miui.com/thread-100458-1-1.html)
Now, if I read the NV_RF_BC_CONFIG_I (#1877) from phone, the value is changed and all GSM and WCDMA bands are enabled, included the GSM 850 MHz band.
But I cannot connect to any GSM band and doesn't recognize any GSM provider in the area.
Bad luck
Anybody has tried this way with success?
Thanks
Anybody changed the basebands of a xiaomi redmi 2 in the qualcomm way with success?
I've tried the Qualcomm method and so far it's not working. Whenever I tried to add GSM/WCDMA bands, my phone keeps restarting. But, I can confirm that I can disable bands. When I tried to add LTE bands 5(850mhz) and 28(700mhz), the phone didn't restart but after disabling all other LTE bands, I'm quite sure the phone couldn't detect those bands. I don't think I can enable it because well... someone with an OPO couldn't... and 700mhz is just really low...
I don't know what's causing my phone to restart everytime I've added additional bands. What rom and you using? I'm using resurrection remix.
magmar452 said:
I don't know what's causing my phone to restart everytime I've added additional bands. What rom and you using? I'm using resurrection remix.
Click to expand...
Click to collapse
Thanks. Now I doesn't feel so lonely.
I did the changes of NV with MIUI v7 installed in the phone and indeed, the changes are still present and the mobile works exactly like before the changes. I read the NV and the bands are enabled, but still doesn't connect to any different bands than before.
It is strange the behaviour you get with a different rom. The NVs should be not affected by the ROM, it isn't?
Which submodel of redmi 2 do you have? Is possible that different hardware or antennas could be assembled in the different submodels of this mobile?
Thanks
korolirio said:
Thanks. Now I doesn't feel so lonely.
I did the changes of NV with MIUI v7 installed in the phone and indeed, the changes are still present and the mobile works exactly like before the changes. I read the NV and the bands are enabled, but still doesn't connect to any different bands than before.
It is strange the behaviour you get with a different rom. The NVs should be not affected by the ROM, it isn't?
Which submodel of redmi 2 do you have? Is possible that different hardware or antennas could be assembled in the different submodels of this mobile?
Thanks
Click to expand...
Click to collapse
I'm using 2014813, I wanted to add 900mhz wcdma which 2014811 has, but I chose 2014813 because it supported more lte frequencies that my carrier uses. There's also some lte frequencies that both models don't support which I tried to add.
I'll try to add bands with miui tomorrow.
magmar452 said:
I'll try to add bands with miui tomorrow.
Click to expand...
Click to collapse
Ok. I am waiting for your results.
Good luck
korolirio said:
Ok. I am waiting for your results.
Good luck
Click to expand...
Click to collapse
I've flashed miui. So far instead of my phone restarting after trying to connect, the radio keeps turning off and on.
Ups! What a different behaviour! Is it maybe because you are changing the NVs for 4G/LTE? I only enabled all the 2G and WCDMA (3G) Bands and didn't changed anything in the 4G and my phone just works and detects networks exactly like before, nothing looked like to change.
korolirio said:
Ups! What a different behaviour! Is it maybe because you are changing the NVs for 4G/LTE? I only enabled all the 2G and WCDMA (3G) Bands and didn't changed anything in the 4G and my phone just works and detects networks exactly like before, nothing looked like to change.
Click to expand...
Click to collapse
Have only messed with 2G/3G so far, adding 900mhz wcdma is still causing issues for me. I can enable 850mhz gsm but I don't know if it would actually work because no carrier uses 850mhz gsm here.
What are the steps you did to try to get 850mhz gsm to work?
magmar452 said:
Have only messed with 2G/3G so far, adding 900mhz wcdma is still causing issues for me. I can enable 850mhz gsm but I don't know if it would actually work because no carrier uses 850mhz gsm here.
Click to expand...
Click to collapse
According to the specs:
HM2014813 Is "China Mobile 4G Dual-Sim Version". It Supports These Network Bands/Frequencies:
4G Network : TDD-LTE (B38 / B39 / B40 / B41: 2555-2655 MHz); FDD-LTE (B3 / B7)
3G Network : TD-SCDMA (1900 / 2100 MHz); WCDMA (850 /1900 / 2100 MHz)
2G network : GSM (900 / 1800 / 1900 MHz)
The phone should have an antenna capable to work at 900 MHz, because it uses this frequency for GSM, then, adding support for WCDMA 900 MHz is not a radio issue but a logic one. Doesn't it?
magmar452 said:
What are the steps you did to try to get 850mhz gsm to work?
Click to expand...
Click to collapse
I basicaly followed this steps:
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
I enabled all the bands using the NV calculator and saved the value that after restarting is still stored, but nothing changed. The phone is working since this (2 weeks ago) exactly like before, no any strange behaviour.
Then... still there are no signs of anybody saying that this method works with this model.
But I don't loose the faith
korolirio said:
According to the specs:
HM2014813 Is "China Mobile 4G Dual-Sim Version". It Supports These Network Bands/Frequencies:
4G Network : TDD-LTE (B38 / B39 / B40 / B41: 2555-2655 MHz); FDD-LTE (B3 / B7)
3G Network : TD-SCDMA (1900 / 2100 MHz); WCDMA (850 /1900 / 2100 MHz)
2G network : GSM (900 / 1800 / 1900 MHz)
The phone should have an antenna capable to work at 900 MHz, because it uses this frequency for GSM, then, adding support for WCDMA 900 MHz is not a radio issue but a logic one. Doesn't it?
I basicaly followed this steps:
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
I enabled all the bands using the NV calculator and saved the value that after restarting is still stored, but nothing changed. The phone is working since this (2 weeks ago) exactly like before, no any strange behaviour.
Then... still there are no signs of anybody saying that this method works with this model.
But I don't loose the faith
Click to expand...
Click to collapse
I don't know if antenna placement is different but the modem between the sub models aren't compatible with each other. This is what I would need to do to get any signal at all.
With mztool, try selecting only 850mhz gsm and edit the RF BC Config as well as the Band Preference values and see what happens.
I think I might need to conclude that I have not been able to get 900 mhz wcdma working on my 2014813 despite the 2014811 having it. Also with LTE I haven't been able to unlock any additional bands.
Hii all, I'm interested with this topic too.
I would like to add LTE band40 which 2014813 has.
What happen if i flash baseband from rom 2014813 to 2014811 ?
Here my baseband radio on crdroid [imgur.com/wgrMqPk]
motahu said:
Hii all, I'm interested with this topic too.
I would like to add LTE band40 which 2014813 has.
What happen if i flash baseband from rom 2014813 to 2014811 ?
Here my baseband radio on crdroid [imgur.com/wgrMqPk]
Click to expand...
Click to collapse
Flashing the 2014813 modem on your 2014811 would probably lose your signal. This or this is what would need to be done if you have a 2014813 and flashed a rom with a 2014811 modem in it.
Happy new year to you, all. @MagMar I already try to flash 2014813 modem to my 2014811..it is no signal but imei n baseband are find..but my 4g card display correctly at lte discovery..so maybe you can share nv config value (like nv 1877, 6828 n 2others) that 2014813 have...n i think lte freq dependent with 3g freq also
motahu said:
Happy new year to you, all. @MagMar I already try to flash 2014813 modem to my 2014811..it is no signal but imei n baseband are find..but my 4g card display correctly at lte discovery..so maybe you can share nv config value (like nv 1877, 6828 n 2others) that 2014813 have...n i think lte freq dependent with 3g freq also
Click to expand...
Click to collapse
While I've flashed 2014811, my phone does recognise the imei and baseband but it'll tell me that I have no service. Both models do share some of the same bands so it should be able to connect assuming both models have a supported band to the carrier. This is why I think that flashing different modems and editing the NVs won't work.
magmar452 said:
I'm using 2014813, I wanted to add 900mhz wcdma which 2014811 has, but I chose 2014813 because it supported more lte frequencies that my carrier uses. There's also some lte frequencies that both models don't support which I tried to add.
I'll try to add bands with miui tomorrow.
Click to expand...
Click to collapse
Mine is 2014813(running a mokee 60.1 rom), too. I've tried to add wcdma 900 through changing the four nv values specified by the mztool and fdd b1&b8 through changing the lte_bc_config nv value. So far everything seems to be fine. While, I not sure whether those changes are successful or not. Do you have any idea how to confirm that those added bands are working or not?
My phone: Lumia 950XL.
I ust got off the phone with T-Mobile tech support and they tell me my phone doesn't support band 12 which is the 700 band that breaks through concrete. Anyone have this phone with good T-Mobile LTE service. I found that my phone does have band 12 by typing ##3282# on my phone dialer then sending the call. It shows this band in a long list of other bands. The band is also check marked showing that it's active.
As I understand it, the issue isn't whether the phone is capable of using LTE Band 12 (700 MHz), but T-Mobile's requirement that the phone support VoLTE as they are deploying Band 12 as LTE-only and in areas where they don't have alternate UMTS support on other bands that the phone can drop into for calls. Unfortunately, VoLTE and WiFi Calling implementations are carrier-specific in the US and Microsoft doesn't seem to be able to support either on non-branded phones. Similar issues exist for me with my 950 XL on AT&T - no HDVoice (VoLTE) or WiFi Calling available.
I have a ta-1083 with bands b7 and b28 blocked, I've searched in several places on google and still could not find something that can release these bands,
Has anyone with this problem been able to solve this problem?
I like the device, but it's already boring with this situation
Thank you all
No way. It's not going to happen. Quit wasting your time and buy another phone that has the bands you need.
Thanks for the answer, and this is very sad to read
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
JavaDroid_ said:
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
Click to expand...
Click to collapse
LTE only option you can choose
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
No, you don't know what a band is. You can't use the test menu to add additional LTE bands. Kindly refrain from posting this idiocy here.
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
gopu5 said:
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
Click to expand...
Click to collapse
You are not talking about the same thing. The OP of this thread wanted to unlock bands that this phone doesn't normally support. We're not talking about "band locking".
Oh yeah this doesn't supports 2600Mhz