Related
I bought an European Optimus 7 and it shows on the box "WCDMA 900/1900/2100, GSM850/900/1800/1900"
There's any way to put this phone to work on 3G WCDMA 850 networks at full speed?
Thanks
I own a Telus version of Optimus 7. My phone has the 900 3G band on it. I will tell you how to check whether your modem supports 850 or not. First, you open up the dialer and enter ##634#. This will install the MFG app, that will be accessible through your app list. The password that it asks is 277634#*#. Now you have access to the manufacturer test/setting menu. Proceed to the Engineer Menu, and then Modem Setting, followed by Band setting. There, you should see all the bands that are available, and WCMDA basically means UTMS or 3G. If you have the 850 band, it should be available in this menu. There are two other things you need to do before gaining access to this band, if available. But in order for me to continue, I need to know which carrier you plan to use this phone on. I am going to assume you want to use this in North America and you have already unlocked it. Let me know, and I shall help you further on making your phone functional for a 3G connection. BTW, I am typing this on my Optimus 7...the keyboard is seriously great, and if it wasn't for the loose buttons, I would have absolutely no regret over my purchase.
Thanks.
I saw here, there are these options available:
1.Automatic
2.WCDMA Only
3.GSM Only
4.WCDMA 850
5.WCDMA 1900
6.WCDMA 2100
7.GSM 850
8.GSM 900
9.GSM 1800
10.GSM 1900
11.WCDMA 900
Sorry for picking up this old thread again but there is no final answer on this.
The point is that I'm having the same problem, I have a european E900 and I can see the WCDMA 850 in the MFG settings. So is this working?
I'm going to Thailand next week and wanted to use True Move 3G which is on 850 Mhz.
Ok, just for the record - I am in Thailand now and the 850Mhz 3G Network from True Move is not working on the European E900.
Hope this helps for those who were looking for this answer.
Does UK LG G2 (D802) support LTE Band 20 (800 MHz) used by O2 UK?
Does anyone know this?
Use info command
okgnew said:
Does anyone know this?
Click to expand...
Click to collapse
1) Go to Phone, just enter following command,
*#*#4636#*#* (no need to press Green Dial Button after this).
2) Once you enter last *, Testing menu will appear. From that menu,select "Phone Information"
3) Scoll down little and you will see "Set Preferred network type". There is dropdown at this location which shows all the networks.
Just note,This is testing menu. It will show all the options like CDMA/WCDMA, GSM, LTE etc. It does not mean that all the networks are supported.
Just insert LTE sim and change option of preferred network from above list to LTE only and check if that works.
Officially it supports 850, 900 bands. But I am wondering if the bands are only controlled software side seeing that the antennas and hardware seem to be streamlined across all versions.
On the box it says:
LG-D802
LTE 2100/1800/2600/900/800
6GB
BLACK BLACK
Thank you for the test menu you solved my problem I just bought the d802 would not work on my 4g sim in uk changed to lte and all good thanks.
Sorry to bring this one back form the dead but the original question doesn't appear to be answered to me...?
I am on Three in the UK and they are rolling out 4G on 800Mhz and 1800Mhz. Complete noob here, but from what I have read 800Mhz has greater range and building penetration (at the expense of some speed), which is great. Except that the G2 doesn't actually support 800Mhz LTE, or does it?
yogG2 said:
1) Go to Phone, just enter following command,
*#*#4636#*#* (no need to press Green Dial Button after this).
2) Once you enter last *, Testing menu will appear. From that menu,select "Phone Information"
3) Scoll down little and you will see "Set Preferred network type". There is dropdown at this location which shows all the networks.
Just note,This is testing menu. It will show all the options like CDMA/WCDMA, GSM, LTE etc. It does not mean that all the networks are supported.
Just insert LTE sim and change option of preferred network from above list to LTE only and check if that works.
Click to expand...
Click to collapse
I'm on Tesco mobile (O2) and have the 32GB D802, and my 4G wasn't working in central Manchester (could only get HSDPA) Just followed your instructions and boom, 4G instantly with full signal inside 16mbps on speed test
mole51 said:
I'm on Tesco mobile (O2) and have the 32GB D802, and my 4G wasn't working in central Manchester (could only get HSDPA) Just followed your instructions and boom, 4G instantly with full signal inside 16mbps on speed test
Click to expand...
Click to collapse
same here with tesco, set the above and worked fine, but after restart just defaults back to gsm/wcdma auto as preferred and need to go through the steps again to achieve 4g. Anyway to save this as preferred?
markgranto said:
same here with tesco, set the above and worked fine, but after restart just defaults back to gsm/wcdma auto as preferred and need to go through the steps again to achieve 4g. Anyway to save this as preferred?
Click to expand...
Click to collapse
+1 Same here. would like to know as well. Kinda dumb that LG doesn't have LTE as a choice on an LTE supported device...
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
markgranto said:
same here with tesco, set the above and worked fine, but after restart just defaults back to gsm/wcdma auto as preferred and need to go through the steps again to achieve 4g. Anyway to save this as preferred?
Click to expand...
Click to collapse
I found and downloaded the free app 4G LTE Switch from the play store to help with this.
While it doesn't solve the problem of having to manually select LTE after each reboot, it saves you from having to dial the code yourself. Instead, just launch the app and it takes you right to those settings. I find it very useful and time saving! :good:
islandboy_2000 said:
+1 Same here. would like to know as well. Kinda dumb that LG doesn't have LTE as a choice on an LTE supported device...
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
I found and downloaded the free app 4G LTE Switch from the play store to help with this.
While it doesn't solve the problem of having to manually select LTE after each reboot, it saves you from having to dial the code yourself. Instead, just launch the app and it takes you right to those settings. I find it very useful and time saving! :good:
Click to expand...
Click to collapse
cheers for the heads up, i'll give it a bash, still find it very strange that a 4G phone doesn't come with an easier way to actually activate 4G.
markgranto said:
cheers for the heads up, i'll give it a bash, still find it very strange that a 4G phone doesn't come with an easier way to actually activate 4G.
Click to expand...
Click to collapse
No problem man. I didn't give up searching and actually followed this thread, where it says "No 4G/LTE?" and tried putting my networks actualy LTE band (17) in there instead of 11 and 13. While it now gived the option of selectiong LTE in the dropdown menu of preferred networks, for some stupid reason, the phone STILL doesn't save the setting and you still have to go back to the menu again after a restart to enable LTE.
While it is even easier than the method I said earlier, still frustrating that even after selecting it in the menu, that it still defaults back to GCM/CDMA!
There just HAS to be a way to make this stick. Any devs out there who could look into this further???
The thread: http://forum.xda-developers.com/showthread.php?t=2681205
Hello,
I am from Portugal, so your mobile could say something rather different. But in essence is all the same.
My version is the D802, International model, just like yours.
1.st step - Provider:
The provider part is always the first to be deal with.
Make sure you go to your operator and ask to enable your SIM-card to have access to LTE.
2.nd step - Equipment:
Go to Definitions -> "Network" tab -> "Sharing connecting & Network" on the bottom -> "Mobile Network" third from last ->
a) Make sure that "Enable Data" is checked;
b) Go to "Network Mode" and choose the option: "GSM (2G) / WCDMA (3G) / LTE (4G) auto".
This way you will always have automatic access to the best network available.
All the people who choose the 4G/LTE only option should check this mode, so you can access 3G when 4G is not available, instead of having no connecting.
Any doubt you have, just ask!
Best regards.
hitardo said:
Hello,
I am from Portugal, so your mobile could say something rather different. But in essence is all the same.
My version is the D802, International model, just like yours.
1.st step - Provider:
The provider part is always the first to be deal with.
Make sure you go to your operator and ask to enable your SIM-card to have access to LTE.
2.nd step - Equipment:
Go to Definitions -> "Network" tab -> "Sharing connecting & Network" on the bottom -> "Mobile Network" third from last ->
a) Make sure that "Enable Data" is checked;
b) Go to "Network Mode" and choose the option: "GSM (2G) / WCDMA (3G) / LTE (4G) auto".
This way you will always have automatic access to the best network available.
All the people who choose the 4G/LTE only option should check this mode, so you can access 3G when 4G is not available, instead of having no connecting.
Any doubt you have, just ask!
Best regards.
Click to expand...
Click to collapse
Step 2 in bold, that's not an option. 3 options are
1. GSM / WCDMA auto
2. WCDMA only
3. GSM only
However when using the 4G switcher app you can change it to GSM (2G) / WCDMA (3G) / LTE (4G) auto and it works fine, but on reboot just defaults back to GSM / WCDMA auto.
Our D802 supports 1800 Mhz and 2600 Mhz frequencies for sure.
But to get the LTE toggle to show up in the network selection menu, we need to insert a LTE capable sim or usim. Tried and tested and not a here say.
If you do not get LTE option in network selection then your sim is not LTE capable. Simple.
sanke1 said:
Our D802 supports 1800 Mhz and 2600 Mhz frequencies for sure.
But to get the LTE toggle to show up in the network selection menu, we need to insert a LTE capable sim or usim. Tried and tested and not a here say.
If you do not get LTE option in network selection then your sim is not LTE capable. Simple.
Click to expand...
Click to collapse
Well the sim I have is LTE capable, When I change the options with the 4G switcher app I instantly get the 4G signal and can get speeds of near 50mbps.
markgranto said:
Step 2 in bold, that's not an option. 3 options are
1. GSM / WCDMA auto
2. WCDMA only
3. GSM only
However when using the 4G switcher app you can change it to GSM (2G) / WCDMA (3G) / LTE (4G) auto and it works fine, but on reboot just defaults back to GSM / WCDMA auto.
Click to expand...
Click to collapse
The option in my phone is:
"GSM (2G) / WCDMA (3G) / LTE (4G) auto"
All this information at one option.
So the phone can choose the highest band level.
This is a problem with your ROM or a problem with your SIM.
And, as I said in my first post, go always first to your provider and ask him form help.
Making sure the SIM part is enabled and fully accessible.
The bands are not important here.
That is because, if you bought your smartphone in the UK, LG made available the D802 model to make your smartphone antenna frequencies correspond to those available at your country.
This will matter if you want to achieve maximum speed of 150Mbps.
But if you want just the regular user experience, you sure have access to LTE network.
In wikipedia (I could not find a good source, as GSMArena make no reference on the version D802)
Wikipedia -> LG G2 -> Specifications
D802 supports 4G/LTE bands:
800, 900, 1800, 2100, 2600
And here you can see the bands of your provider/network:
Wikipedia -> List of LTE networks -> Europe
EE: 1800, 2600
Hutchison 3: 800, 1800
O2: 800
UK Broadband: 3500, 3600
Vodafone: 800
This is wikipedia information, so take this with a pinch of salt, and search for a better source.
hitardo said:
The option in my phone is:
"GSM (2G) / WCDMA (3G) / LTE (4G) auto"
All this information at one option.
So the phone can choose the highest band level.
This is a problem with your ROM or a problem with your SIM.
And, as I said in my first post, go always first to your provider and ask him form help.
Making sure the SIM part is enabled and fully accessible.
The bands are not important here.
That is because, if you bought your smartphone in the UK, LG made available the D802 model to make your smartphone antenna frequencies correspond to those available at your country.
This will matter if you want to achieve maximum speed of 150Mbps.
But if you want just the regular user experience, you sure have access to LTE network.
In wikipedia (I could not find a good source, as GSMArena make no reference on the version D802)
Wikipedia -> LG G2 -> Specifications
D802 supports 4G/LTE bands:
800, 900, 1800, 2100, 2600
And here you can see the bands of your provider/network:
Wikipedia -> List of LTE networks -> Europe
EE: 1800, 2600
Hutchison 3: 800, 1800
O2: 800
UK Broadband: 3500, 3600
Vodafone: 800
This is wikipedia information, so take this with a pinch of salt, and search for a better source.
Click to expand...
Click to collapse
Its a UK sim free handset, and i'm on tesco (which is O2).
Sim card is fine as tested in another 4G phone and defaults to 4G as it should after collecting the APN settings from the network. Checked the APN and both the exact same compared to the one the LG G2 is using.
I'm using stock rom and this happened initially on JB, then updated to KK, factory reset, and still the same, then updated last week, still the same.
From reading this thread looks like i'm not the only one.
markgranto said:
Its a UK sim free handset, and i'm on tesco (which is O2).
Sim card is fine as tested in another 4G phone and defaults to 4G as it should after collecting the APN settings from the network. Checked the APN and both the exact same compared to the one the LG G2 is using.
I'm using stock rom and this happened initially on JB, then updated to KK, factory reset, and still the same, then updated last week, still the same.
From reading this thread looks like i'm not the only one.
Click to expand...
Click to collapse
Wikipedia, and other websites, say O2 only acquired 800MHz band for LTE.
And LG G2 D802 only supports:
850 (band 5), 900 (band 8), 1800 (band 3), 2100 (band 1), 2600 (band 7) MHz.
I saw this at PhoneArena, GSMArena and ATGSM.
This brings a problem for people which their carrier only emits LTE at 800MHz, when not supported by come smartphones.
But I recommend you all to ask LG about the frequencies supported by the LG G2 D802 version, and ask your network carrer/ provider for LTE frequencies.
That way you will be absolutely sure about its compatibility or not.
hitardo said:
Wikipedia, and other websites, say O2 only acquired 800MHz band for LTE.
And LG G2 D802 only supports:
850 (band 5), 900 (band 8), 1800 (band 3), 2100 (band 1), 2600 (band 7) MHz.
I saw this at PhoneArena, GSMArena and ATGSM.
This brings a problem for people which their carrier only emits LTE at 800MHz, when not supported by come smartphones.
But I recommend you all to ask LG about the frequencies supported by the LG G2 D802 version, and ask your network carrer/ provider for LTE frequencies.
That way you will be absolutely sure about its compatibility or not.
Click to expand...
Click to collapse
wikipedia is saying....LTE band support 800/900/1800/2100/2600, however tesco (o2) are definitely on 800mhz, so must be something to do with LG so it will no doubt be them who has to answer the question, and never do anything about it.
Note: The title of this guide is Enabling LTE bands, but actually, it's for LTE and for HSDPA bands.
This is something near and dear to me, as I travel the world somewhat and really prefer to have only one phone.
I spent all day figuring out how to add more LTE bands to this phone (I have a bootloader unlocked H815, European version, so please understand that it may not work with other versions, and simply can't even be attempted until you can root it.)
The model I own comes with the following bands:
2G bands GSM 850 / 900 / 1800 / 1900
3G bands HSDPA 850 / 900 / 1900 / 2100
4G bands LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 17(700), 20(800), 28(700)
I noticed, however, in the hidden testing menu (277634#*#, Field Test, Modem Settings, Network Mode), the following extra bands, none of which worked:
WCDMA 800, WCDMA AWS (1700/2100)
Along with the following extra LTE bands(277634#*#, Field Test, Modem Settings, LTE Band Selection), again, none of which worked:
Band 12, 13, 25, 29, 40
The result?
Having enabled all of the LTE bands available in the testing menu, I was able to add WCDMA 800 and AWS bands, along with LTE band 40. Unfortunately at this time, Bands 12, 13, 25, and 29 do not work, even if enabled. However, a T-Mobile radio file might help for band 12 if it's a radio issue, or it could be a hardware difference in which case there's nothing we can do. I really don't know until I can test with it. I'm happy about the extra bands, though, because in the US I use T-Mobile, so AWS helps, and in Japan, band 800 is used. Maybe I'll use 40 if I go to China some time.
So how to actually do this?
Step 1: Unlock bootloader and root. You can find out how to do that in other threads.
Step 2: Install the LG USB Drivers. It comes with the LG PC Software.
Step 3: Download CDMAtool from here: http://cdmatool.com/ A free trial works fine for this.
Step 4: Make sure you have adb, and connect your G4 to your PC. In an adb shell, execute the following:
su
echo 1 > /sys/devices/platform/lg_diag_cmd/diag_enable
Step 5: Unplug and re-plug your USB cable. Your phone is now in diag mode (although you wouldn't know any better because you don't get any special device names in Device Manager.)
Step 6: Open DFS which you downloaded from CDMAtool.com Deal with making an account, etc. as you have to get into the software. Close the account window and the actual software will launch.
Step 7: Double click your device to put a checkmark by it in DFS.
Step 8: Click the Band tab. Choose RF BC Config at the bottom. Then, choose read.
Step 9: Make sure your bands are displayed. Check the extra bands you want to add. I recommend against enabling bands other than those mentioned in this thread, but you can try at your own risk (in fact, I'd be interested to see if any work!)
Step 10: Click Write.
Step 11: Click the LTE tab. Click Read. Check the bands you want to add, click write. Then, choose LTE BC Config DIV LTE #6829 at the bottom and repeat the process again there.
Step 12: Sometimes the write doesn't go through, and I have no idea why, but I found it helps to play with your phone for five minutes after writing. Also, I found that even if you're not changing bands, it's somehow necessary to flash HSDPA and LTE bands both in one go before restarting the phone. Otherwise strange things happened like losing bands. I was able to get them back though by re-flashing.
Step 13: Reboot your phone and pray.
Step 14: Go into the hidden menu and test the new bands. If they work, you will see SUCCESS when you press them in the test menu. (277634#*#, Field Test, Modem Settings, Network Mode/LTE Band Selection)
I hope this is useful to any other globetrotters!
That's gr8 tip!
Bands are tied to the hardware. Software tweaking won't add them. Not unless they're already part of the hardware, but disabled and hidden by LG for some reason. But that's doubtful.
It might tell you they've been added, but I highly doubt they'll actually work. But I'm no expert so LG may have done something weird here.
So. I have a T MOUS HTC One M8. We have a Qualcomm LTE radio that apparently has access to Band 12 which is TMOUS new 700 MHZ spectrum.
I am currently on band 4 through LTE discovery. Is there any method for adding Band 12 to this version of the HTC One M8.
What aspect of this guide can be used to add to the HTC One M8 T-Mobile Version Band 12?
Sent from my HTC One_M8 using XDA Free mobile app
the_scotsman said:
Bands are tied to the hardware. Software tweaking won't add them. Not unless they're already part of the hardware, but disabled and hidden by LG for some reason. But that's doubtful.
It might tell you they've been added, but I highly doubt they'll actually work. But I'm no expert so LG may have done something weird here.
Click to expand...
Click to collapse
The added bands do work (depending on the band) so in this phone's case, two new hsdpa bands and one new LTE band were add-able.
I was able to personally confirm HSDPA AWS working on T-Mobile US. The other two added ones I can also confirm because they are scanning on that frequency when using the LTE Band test menu, although there is no local network to attach to.
With other phones even more drastic success stories exist:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
But in this phone's case, the hardware supported more bands than were enabled, so enabling them was possible. I haven't been able to get particularly Band 12 working, probably because of either hardware or radio file, but it was nice to enable some other bands and see them work.
@the_scotsman the hardware in this case is able to do it normally, but LG has to pay a fee to unlock these bands which is why they're normally locked via firmware.
the_scotsman said:
Bands are tied to the hardware. Software tweaking won't add them. Not unless they're already part of the hardware, but disabled and hidden by LG for some reason. But that's doubtful.
It might tell you they've been added, but I highly doubt they'll actually work. But I'm no expert so LG may have done something weird here.
Click to expand...
Click to collapse
ixrs said:
@the_scotsman the hardware in this case is able to do it normally, but LG has to pay a fee to unlock these bands which is why they're normally locked via firmware.
Click to expand...
Click to collapse
I worked with Qualcomm chips before so the software setting enables the bands in software. the_scotsman is correct in that if there are no antennae on the phone for those bands then the OP's guide will not do anything. Seems that the OP has confirmed that for bands like HSPA Band 4 the antenna is present. It could also be that the LG didn't calibrate performance of the phone on those new bands for this model. That all depends on how they are manufacturing this phone which we will never know.
Anyone else tried this out? I use the Canadian equivalent of T-mobile so I would need HSPA Band 4. I'm wondering if I should buy the international version and get the unlocked bootloader or buy the locked bootloader version for Canada.
HighTowerDV said:
I worked with Qualcomm chips before so the software setting enables the bands in software. the_scotsman is correct in that if there are no antennae on the phone for those bands then the OP's guide will not do anything. Seems that the OP has confirmed that for bands like HSPA Band 4 the antenna is present. It could also be that the LG didn't calibrate performance of the phone on those new bands for this model. That all depends on how they are manufacturing this phone which we will never know.
Anyone else tried this out? I use the Canadian equivalent of T-mobile so I would need HSPA Band 4. I'm wondering if I should buy the international version and get the unlocked bootloader or buy the locked bootloader version for Canada.
Click to expand...
Click to collapse
I actually want to know the same. I need HSPA B4 (AWS). I want to buy LG G4 H15 version. If I can enable HSPA AWS band, then im on board to get this phone!
Not particularly useful as this requires root
kyle1867 said:
Not particularly useful as this requires root
Click to expand...
Click to collapse
Yes but the H815 from Europe can be rooted easily so this is an option if you bought this model of the G4.
LimitsX said:
I actually want to know the same. I need HSPA B4 (AWS). I want to buy LG G4 H15 version. If I can enable HSPA AWS band, then im on board to get this phone!
Click to expand...
Click to collapse
I ended up with the Canadian version in the end. Turns out the H812 has all the canadian bands turned on and once you unlock the device you can go from a carrier who only uses HSPA(AWS) to one that uses LTE without any rooting or enabling bands. Seems at least for the Canadian version all the bands for all Canadian carriers was turned on.
duraaraa said:
The added bands do work (depending on the band) so in this phone's case, two new hsdpa bands and one new LTE band were add-able.
I was able to personally confirm HSDPA AWS working on T-Mobile US. The other two added ones I can also confirm because they are scanning on that frequency when using the LTE Band test menu, although there is no local network to attach to.
With other phones even more drastic success stories exist:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
But in this phone's case, the hardware supported more bands than were enabled, so enabling them was possible. I haven't been able to get particularly Band 12 working, probably because of either hardware or radio file, but it was nice to enable some other bands and see them work.
Click to expand...
Click to collapse
Were you in a confirmed Band 12 area? Or did it say "fail" and not even scan it?
If he had a H811 model, Band 12 is enabled.. I had Band 12 LTE when I was in the US in the Maryland/DC Area..
Sorry for late reply. It said 'fail' and didn't scan. This is European H815. It's now bricked because I played with it too much.
Has anyone tried this on the VS986? It seems that band 2 is locked even though it's listed as a supported band. When using a T-Mobile SIM I only get LTE in band 4 areas and not band 2/12.
geoff5093 said:
Has anyone tried this on the VS986? It seems that band 2 is locked even though it's listed as a supported band. When using a T-Mobile SIM I only get LTE in band 4 areas and not band 2/12.
Click to expand...
Click to collapse
Seeing as how the first prerequisite is an unlocked BL, I don't think this would work :/
Dennisg34 said:
Seeing as how the first prerequisite is an unlocked BL, I don't think this would work :/
Click to expand...
Click to collapse
On the G3 you were able to use the HiddenMenu via a root-capable shortcut app, but now we can't access it as we get a FC. I skimmed this and didn't see the unlocked BL requirement, my bad!
@duraaraa How do you know if they're "working" exactly?
In the field test menu on my rooted H818P under LTE Band Selection, I have listed 1,2,3,4,5,7,8,12,13,17,20,25,28,29,40, half of which say "FAIL" when you tap on them, including band 28, which is LTE700 in Australia (FDD)...yet this phones' specs indicate this works...so I'm a little baffled?!
I don't have an unlocked bootloader (obviously), so I guess that means I'm no hope of performing anything successful in terms of accessing other bands?
RoOSTA
roosta said:
@duraaraa How do you know if they're "working" exactly?
In the field test menu on my rooted H818P under LTE Band Selection, I have listed 1,2,3,4,5,7,8,12,13,17,20,25,28,29,40, half of which say "FAIL" when you tap on them, including band 28, which is LTE700 in Australia (FDD)...yet this phones' specs indicate this works...so I'm a little baffled?!
I don't have an unlocked bootloader (obviously), so I guess that means I'm no hope of performing anything successful in terms of accessing other bands?
RoOSTA
Click to expand...
Click to collapse
Well, they went from saying "FAIL" when chosen, to trying to find a signal. Not being in a Band 40 country, I can't be sure, of course, but my assumption is, since it became the same as all other bands which were to be supported by the phone, by not saying "FAIL," that it would work.
However, if you are sure that band 28 is working on your phone, and it still says FAIL, this opens the door to having more working than I thought, so it's certainly interesting! Sadly, as I mentioned before, my phone is currently unrecoverably bricked, so I have to wait for some kind of way out of the brick to continue this testing. Ironically, I'm going to China in August so I could have tested band 40
duraaraa said:
Well, they went from saying "FAIL" when chosen, to trying to find a signal. Not being in a Band 40 country, I can't be sure, of course, but my assumption is, since it became the same as all other bands which were to be supported by the phone, by not saying "FAIL," that it would work.
However, if you are sure that band 28 is working on your phone, and it still says FAIL, this opens the door to having more working than I thought, so it's certainly interesting! Sadly, as I mentioned before, my phone is currently unrecoverably bricked, so I have to wait for some kind of way out of the brick to continue this testing. Ironically, I'm going to China in August so I could have tested band 40
Click to expand...
Click to collapse
The problem I've discovered is band 28 (700mhz FDD) SHOULD be working on the H818P be default/stock....yet after root and accessing hidden menu, still says "FAIL"
Thats a huge worry, as the LG sticker with IMEI (etc) indicates it should work on that band!
Really hope unlocked bootloader is coming soon for H818P. Confirmed in the DUAL SIM thread, that phone *DOES* support 700Mhz bandwith...but for countries that probably have 100% of their population that DO NOT even own or sell this phone. Band 17 is supported, not Band 28 (densely populated countrieslike Aus, NZ etc). @duraaraa
Really need to unlock band 28!
RoOSTA
Hello. I have a Xiaomi Redmi 2 2014811 subversion which doesn't have the 850 GSM band that I need in the rural area where I live.
I have seen that the submodel 2014819 (Brazil) has this band and I would like to know if is possible to change the baseband by flashing any software.
In other words: Are submodels 2014811, 2014819 the same hardware with different radio/modem partition softwares or have they different hardwares?
I have seen that with other mobiles like Moto E 2015 is possible to change the region of the baseband by software:
http://forum.xda-developers.com/moto-e-2015/help/question-models-bands-t3163453
Thanks
I hope someone can help you with this
Hi, I'm Brazilian and got the HM2014819, as soon as I get the partition table I will upload it for you TO TRY of course after a Nandroid Backup by you. I will upload if the size match with my data plan :good:
Well, I don't know if you will can successfully flash it, and if it will work.
Going to dump the modem here in a .img that you can flash or make a flash zip
Thanks Lennoard, but I think is not a modem issue. I am on the way to Unlock the GSM bands in the Qualcomm, if it would be possible.
I have followed all the steps in
- Unlocking Basebands on MI4 (http://forum.xda-developers.com/mi-4/general/unlocking-basebands-mi4-t2879685)
- Unlock all bands of your Qualcomm device! Use your phone globally! No bs! (http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269)
- [Q & A] how can i enable qualcom diagnostic mode? SOLVED (http://en.miui.com/thread-100458-1-1.html)
Now, if I read the NV_RF_BC_CONFIG_I (#1877) from phone, the value is changed and all GSM and WCDMA bands are enabled, included the GSM 850 MHz band.
But I cannot connect to any GSM band and doesn't recognize any GSM provider in the area.
Bad luck
Anybody has tried this way with success?
Thanks
Anybody changed the basebands of a xiaomi redmi 2 in the qualcomm way with success?
I've tried the Qualcomm method and so far it's not working. Whenever I tried to add GSM/WCDMA bands, my phone keeps restarting. But, I can confirm that I can disable bands. When I tried to add LTE bands 5(850mhz) and 28(700mhz), the phone didn't restart but after disabling all other LTE bands, I'm quite sure the phone couldn't detect those bands. I don't think I can enable it because well... someone with an OPO couldn't... and 700mhz is just really low...
I don't know what's causing my phone to restart everytime I've added additional bands. What rom and you using? I'm using resurrection remix.
magmar452 said:
I don't know what's causing my phone to restart everytime I've added additional bands. What rom and you using? I'm using resurrection remix.
Click to expand...
Click to collapse
Thanks. Now I doesn't feel so lonely.
I did the changes of NV with MIUI v7 installed in the phone and indeed, the changes are still present and the mobile works exactly like before the changes. I read the NV and the bands are enabled, but still doesn't connect to any different bands than before.
It is strange the behaviour you get with a different rom. The NVs should be not affected by the ROM, it isn't?
Which submodel of redmi 2 do you have? Is possible that different hardware or antennas could be assembled in the different submodels of this mobile?
Thanks
korolirio said:
Thanks. Now I doesn't feel so lonely.
I did the changes of NV with MIUI v7 installed in the phone and indeed, the changes are still present and the mobile works exactly like before the changes. I read the NV and the bands are enabled, but still doesn't connect to any different bands than before.
It is strange the behaviour you get with a different rom. The NVs should be not affected by the ROM, it isn't?
Which submodel of redmi 2 do you have? Is possible that different hardware or antennas could be assembled in the different submodels of this mobile?
Thanks
Click to expand...
Click to collapse
I'm using 2014813, I wanted to add 900mhz wcdma which 2014811 has, but I chose 2014813 because it supported more lte frequencies that my carrier uses. There's also some lte frequencies that both models don't support which I tried to add.
I'll try to add bands with miui tomorrow.
magmar452 said:
I'll try to add bands with miui tomorrow.
Click to expand...
Click to collapse
Ok. I am waiting for your results.
Good luck
korolirio said:
Ok. I am waiting for your results.
Good luck
Click to expand...
Click to collapse
I've flashed miui. So far instead of my phone restarting after trying to connect, the radio keeps turning off and on.
Ups! What a different behaviour! Is it maybe because you are changing the NVs for 4G/LTE? I only enabled all the 2G and WCDMA (3G) Bands and didn't changed anything in the 4G and my phone just works and detects networks exactly like before, nothing looked like to change.
korolirio said:
Ups! What a different behaviour! Is it maybe because you are changing the NVs for 4G/LTE? I only enabled all the 2G and WCDMA (3G) Bands and didn't changed anything in the 4G and my phone just works and detects networks exactly like before, nothing looked like to change.
Click to expand...
Click to collapse
Have only messed with 2G/3G so far, adding 900mhz wcdma is still causing issues for me. I can enable 850mhz gsm but I don't know if it would actually work because no carrier uses 850mhz gsm here.
What are the steps you did to try to get 850mhz gsm to work?
magmar452 said:
Have only messed with 2G/3G so far, adding 900mhz wcdma is still causing issues for me. I can enable 850mhz gsm but I don't know if it would actually work because no carrier uses 850mhz gsm here.
Click to expand...
Click to collapse
According to the specs:
HM2014813 Is "China Mobile 4G Dual-Sim Version". It Supports These Network Bands/Frequencies:
4G Network : TDD-LTE (B38 / B39 / B40 / B41: 2555-2655 MHz); FDD-LTE (B3 / B7)
3G Network : TD-SCDMA (1900 / 2100 MHz); WCDMA (850 /1900 / 2100 MHz)
2G network : GSM (900 / 1800 / 1900 MHz)
The phone should have an antenna capable to work at 900 MHz, because it uses this frequency for GSM, then, adding support for WCDMA 900 MHz is not a radio issue but a logic one. Doesn't it?
magmar452 said:
What are the steps you did to try to get 850mhz gsm to work?
Click to expand...
Click to collapse
I basicaly followed this steps:
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
I enabled all the bands using the NV calculator and saved the value that after restarting is still stored, but nothing changed. The phone is working since this (2 weeks ago) exactly like before, no any strange behaviour.
Then... still there are no signs of anybody saying that this method works with this model.
But I don't loose the faith
korolirio said:
According to the specs:
HM2014813 Is "China Mobile 4G Dual-Sim Version". It Supports These Network Bands/Frequencies:
4G Network : TDD-LTE (B38 / B39 / B40 / B41: 2555-2655 MHz); FDD-LTE (B3 / B7)
3G Network : TD-SCDMA (1900 / 2100 MHz); WCDMA (850 /1900 / 2100 MHz)
2G network : GSM (900 / 1800 / 1900 MHz)
The phone should have an antenna capable to work at 900 MHz, because it uses this frequency for GSM, then, adding support for WCDMA 900 MHz is not a radio issue but a logic one. Doesn't it?
I basicaly followed this steps:
Unlock all bands of your Qualcomm device! Use your phone globally! No bs!
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
I enabled all the bands using the NV calculator and saved the value that after restarting is still stored, but nothing changed. The phone is working since this (2 weeks ago) exactly like before, no any strange behaviour.
Then... still there are no signs of anybody saying that this method works with this model.
But I don't loose the faith
Click to expand...
Click to collapse
I don't know if antenna placement is different but the modem between the sub models aren't compatible with each other. This is what I would need to do to get any signal at all.
With mztool, try selecting only 850mhz gsm and edit the RF BC Config as well as the Band Preference values and see what happens.
I think I might need to conclude that I have not been able to get 900 mhz wcdma working on my 2014813 despite the 2014811 having it. Also with LTE I haven't been able to unlock any additional bands.
Hii all, I'm interested with this topic too.
I would like to add LTE band40 which 2014813 has.
What happen if i flash baseband from rom 2014813 to 2014811 ?
Here my baseband radio on crdroid [imgur.com/wgrMqPk]
motahu said:
Hii all, I'm interested with this topic too.
I would like to add LTE band40 which 2014813 has.
What happen if i flash baseband from rom 2014813 to 2014811 ?
Here my baseband radio on crdroid [imgur.com/wgrMqPk]
Click to expand...
Click to collapse
Flashing the 2014813 modem on your 2014811 would probably lose your signal. This or this is what would need to be done if you have a 2014813 and flashed a rom with a 2014811 modem in it.
Happy new year to you, all. @MagMar I already try to flash 2014813 modem to my 2014811..it is no signal but imei n baseband are find..but my 4g card display correctly at lte discovery..so maybe you can share nv config value (like nv 1877, 6828 n 2others) that 2014813 have...n i think lte freq dependent with 3g freq also
motahu said:
Happy new year to you, all. @MagMar I already try to flash 2014813 modem to my 2014811..it is no signal but imei n baseband are find..but my 4g card display correctly at lte discovery..so maybe you can share nv config value (like nv 1877, 6828 n 2others) that 2014813 have...n i think lte freq dependent with 3g freq also
Click to expand...
Click to collapse
While I've flashed 2014811, my phone does recognise the imei and baseband but it'll tell me that I have no service. Both models do share some of the same bands so it should be able to connect assuming both models have a supported band to the carrier. This is why I think that flashing different modems and editing the NVs won't work.
magmar452 said:
I'm using 2014813, I wanted to add 900mhz wcdma which 2014811 has, but I chose 2014813 because it supported more lte frequencies that my carrier uses. There's also some lte frequencies that both models don't support which I tried to add.
I'll try to add bands with miui tomorrow.
Click to expand...
Click to collapse
Mine is 2014813(running a mokee 60.1 rom), too. I've tried to add wcdma 900 through changing the four nv values specified by the mztool and fdd b1&b8 through changing the lte_bc_config nv value. So far everything seems to be fine. While, I not sure whether those changes are successful or not. Do you have any idea how to confirm that those added bands are working or not?
I have a ta-1083 with bands b7 and b28 blocked, I've searched in several places on google and still could not find something that can release these bands,
Has anyone with this problem been able to solve this problem?
I like the device, but it's already boring with this situation
Thank you all
No way. It's not going to happen. Quit wasting your time and buy another phone that has the bands you need.
Thanks for the answer, and this is very sad to read
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
JavaDroid_ said:
Yes, it runs on 4g, but in bands like b5 and b3, but these are not standard here in Brazil, the network with the largest coverage is b7 that runs at 2600mhz,
So it fluctuates a lot between bands and often loses the signal altogether
I've changed a lot in these settings, but it doesn't solve 100%
Click to expand...
Click to collapse
LTE only option you can choose
gopu5 said:
6.1 plus supports all the bands. You can use this code *#*#4636#*#* to change bands and it works.
Click to expand...
Click to collapse
No, you don't know what a band is. You can't use the test menu to add additional LTE bands. Kindly refrain from posting this idiocy here.
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
gopu5 said:
I know what is LTE Bands. 6.1 Plus supports all the bands but the fact it is configured in such a way the user can't change it hence the network switches bands automatically.
The LTE Only option configure the network to the 4G but yes you don't have the option to lock a particular frequency unlike other stock Android devices.
I dont know about other countries but here in India I use Jio 4G with 6.1 Plus my phone locks into 850Mhz , 1800Mhz & 2300Mhz (Jio supports it) simultaneously depending upon the conditions in my location.
The Android one might have disabled advanced band locking (FDD & TDD) feature. I'm not talking idiocy here.
Click to expand...
Click to collapse
You are not talking about the same thing. The OP of this thread wanted to unlock bands that this phone doesn't normally support. We're not talking about "band locking".
Oh yeah this doesn't supports 2600Mhz