I've just got myself a used Imate (codename Himalaya & Andes), the camera software seems to be missing... is there anyway that i can recover it... maybe a hard reset might reset the software settings?
Please help! thanks
Hold power button andinsert styli into reset button at same time.
How do I do a so called hard reset and how do I do a so called soft reset ?
Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
Hi guys, after Rom upgrades etc I have difficulty in doing hard resets, usually just pull the battery and bumble on......is there an easy way or trick etc?
Thanks
Welcome to XDA!!
Sorry...but just trying to clarify...
Hard reset or soft reset? To hard reset, go to settings>system>Clear Storage
Then you'll have a freshly installed rom (no user added software).
Pulling out the battery or turning the phone off is the same as a soft reset...
What are you trying to do anyways?
After ROM flash...a lot of the instructions said do a hard reset by pressing the volume buttons and then the on/off while doing back flips with a can of baked beans between your knees.......honestly I just wanted to do a Hard Reset after flash and ensure it worked........could not tell up till now ....thanks heaps for the reply and info, much appreciated
I did a soft reset and now the WinMo password doesn't work! Oddly, the hint is correct . Is there an alternative to a HARD reset? Tried removing the battery. Nada. HELP!!!
Edit: Never mind. Couldn't wait. Did a hard reset.
-Bob-