Hello everyone
Sorry for my bad English but i really need help
Recently i bought g950f but it was have sim locked and twrp on it i decided to flash phone with latest firmware to remove twrp i download the firmware and flash it but after flash stuck on encryption failed message and ask me to reset the Device i factory reset and flash again and even wipe internal storage in twrp then flash but no thing happened and the message still showing please i need help to back my phone to life ..thank alot
I have a feeling because Knox counter is tripped, it is failing to encrypt, Use Odin and flash device back to factory condition. I have a feeling the Knox being tripped is your issue here.
sofir786 said:
I have a feeling because Knox counter is tripped, it is failing to encrypt, Use Odin and flash device back to factory condition. I have a feeling the Knox being tripped is your issue here.
Click to expand...
Click to collapse
i tried more than stock with no luck but i found a solution finally i flashed no-verity-opt-encrypt-5.1.zip by twrp and my proplem solved thank you any way and i hope i was helpful:fingers-crossed:
Related
guys,
My I9505 has a hardware problem: the VOL DOWN is unresponsive.
That's a nasty problem, because rebooting the phone gives a lot of problems (warnings about a custom rom, and then nothing works anymore)
So I'd like to return it, but have to restore the phone for warranty.
I managed to flash latest stock MH8.
Here are my questions:
1. before, I've flashed autoroot - does that make the flashcounter go up?
2. before, I've flashed philz recovery - does that make the flashcounter go up?
3. I've flashed the new stock firmware, but still see a clockworkmod folder. can I safely remove that?
4. are there other folders I've to remove to NOT void my warranty?
5. is it necessary/safe to use triangle away on MH8 with the new bootloader?
thanks for any insights!
mailman
mailman123 said:
guys,
My I9505 has a hardware problem: the VOL DOWN is unresponsive.
That's a nasty problem, because rebooting the phone gives a lot of problems (warnings about a custom rom, and then nothing works anymore)
So I'd like to return it, but have to restore the phone for warranty.
I managed to flash latest stock MH8.
Here are my questions:
1. before, I've flashed autoroot - does that make the flashcounter go up?
2. before, I've flashed philz recovery - does that make the flashcounter go up?
3. I've flashed the new stock firmware, but still see a clockworkmod folder. can I safely remove that?
4. are there other folders I've to remove to NOT void my warranty?
5. is it necessary/safe to use triangle away on MH8 with the new bootloader?
thanks for any insights!
mailman
Click to expand...
Click to collapse
Be VERY VERY careful if you're running the new knox firmware that you don't trip the eFuse and change KNOX Warranty void status.
If you have flashed stock firmware MH8 in Odin I would simply do a factory reset in the STOCK recovery and wipe everything that way and send to repair centre.
Do not flash ANYTHING custom or otherwise, even older Stock firmware in Odin.
If you do you will trip the eFuse, your KNOX warranty status will change and you'll be f***ed mate.
Obagleyfreer said:
Be VERY VERY careful if you're running the new knox firmware that you don't trip the eFuse and change KNOX Warranty void status.
If you have flashed stock firmware MH8 in Odin I would simply do a factory reset in the STOCK recovery and wipe everything that way and send to repair centre.
Do not flash ANYTHING custom or otherwise, even older Stock firmware in Odin.
If you do you will trip the eFuse, your KNOX warranty status will change and you'll be f***ed mate.
Click to expand...
Click to collapse
Thanks, that's very good advice. will keep it in mind.
Do you know the answer to my questions about the flashcounter going up by flashing recoveries in stead of custom roms?
thanks,
mailman
Hi, i have note 3 sm n9005 or something and rooted my phone for some stupid reason, its still on stock the only thing that i think happened was i have supersu, i paniced and factory reset, now supersu has a error thing with something to do with binary settings or something. All i want to do it fully reset my phone, if its any help im british with EE... does flashing supersu trip knox counter? Am i actually rooted for if i were to flash stock? Will that trip it? Iv knly had phone few months and im scared... if i flash stock can i then update legally coz i cant update because the device is modified? I used odin... can someone help please, i know nothing and yes, i should look into what im doing more before hand. Can you explain everything and what to do please? Every little thing, please and without tripping knox and as if it was out the box new. Please
Firstly, flashing SuperSU trips KNOX. In the first place, to install SuperSU you need a custom recovery which would ALSO trip KNOX. Flashing back to stock unroots your phone too.
If you are convinced that you have not tripped KNOX, just re flash your phone back to stock with ODIN.
This_Guyse said:
Firstly, flashing SuperSU trips KNOX. In the first place, to install SuperSU you need a custom recovery which would ALSO trip KNOX. Flashing back to stock unroots your phone too.
If you are convinced that you have not tripped KNOX, just re flash your phone back to stock with ODIN.
Click to expand...
Click to collapse
I dont have a clue what i first did but what i did magically apeared with supersu. Can i flash stock which will get rid of supersu and can i reset my knox counter? And am i actually rooted seen as i factory reset?
MarkDyer1 said:
I dont have a clue what i first did but what i did magically apeared with supersu. Can i flash stock which will get rid of supersu and can i reset my knox counter? And am i actually rooted seen as i factory reset?
Click to expand...
Click to collapse
Flashing stock will get rid of SuperSU and root but you cannot reset KNOX. It is permanently 0x1 and will always be.
This_Guyse said:
Flashing stock will get rid of SuperSU and root but you cannot reset KNOX. It is permanently 0x1 and will always be.
Click to expand...
Click to collapse
What about the fact i factory reset? Is it still rooted to flash stock? And doesnt it have to be a unrooted stocked rather than flashing rooted stock? And where do i got stock and do i need to unzip files and stuff?
MarkDyer1 said:
Hi, i have note 3 sm n9005 or something and rooted my phone for some stupid reason, its still on stock the only thing that i think happened was i have supersu, i paniced and factory reset, now supersu has a error thing with something to do with binary settings or something. All i want to do it fully reset my phone, if its any help im british with EE... does flashing supersu trip knox counter? Am i actually rooted for if i were to flash stock? Will that trip it? Iv knly had phone few months and im scared... if i flash stock can i then update legally coz i cant update because the device is modified? I used odin... can someone help please, i know nothing and yes, i should look into what im doing more before hand. Can you explain everything and what to do please? Every little thing, please and without tripping knox and as if it was out the box new. Please
Click to expand...
Click to collapse
Reboot in download mode I. E. Volume down+home+power, check the knox counter if it's 0x1 then it has already been tripped and you have been set free ?? and if it's 0x0 you are still locked in a cage.
Report back with what you see.
saadramiz said:
Reboot in download mode I. E. Volume down+home+power, check the knox counter if it's 0x1 then it has already been tripped and you have been set free ?? and if it's 0x0 you are still locked in a cage.
Report back with what you see.
Click to expand...
Click to collapse
I know i have done something coz when i want to update it says this device has been modified. But i havent flashed any roms so surely knox should be 0x0 and flashing stock keeps it 0x0 doesnt it?
MarkDyer1 said:
I know i have done something coz when i want to update it says this device has been modified. But i havent flashed any roms so surely knox should be 0x0 and flashing stock keeps it 0x0 doesnt it?
Click to expand...
Click to collapse
Yes, if your Knox is still 0x0, flashing stock keeps it 0x0.
Use Phone INFO ★Samsung★ app to check for the Knox Warranty Void status (in the GENERAL INFO section).
Hello folks,
today I flashed official Lollipop 5.0.1 via ODIN on my N910-F and accidently tripped my KNOX Counter. So be careful if you do not want to void your warranty.
My phone is carrier branded DTM (T-Mobile) and had latest OTA firmware 4.4.4 *ANK4 on it. Back when i did buy my device I decided to debrand my phone as soon as Lollipop comes out.
So I did and flashed in one step from KitKat (T-Mobile) to Lollipop (Open). From what I read a assumed it would be no problem because it's a newer build but in some way it tripped my Knox Counter to 0x1 (3).
I did use Odin 3.09 as suggested by sammobile but ended up with an error (Fail) at the end of the flashing procedure. I downloaded Odin 3.10 and reflashed without any problems. This might be also considered as a reason for tripping the counter (as it says 3). I checked my counter after 2 factory resets afterwards.
Now I'm actually good to root I guess. Be careful.
EDIT: When I'm performing a factory reset from within the ROM it fails with "dm-verity verification failed..." message and takes me to the Android system recovery. From there I can do the factory reset. I think there is something gone wrong. Ideas on that message?
raupe1337 said:
Hello folks,
today I flashed official Lollipop 5.0.1 via ODIN in my N910-F and accidently tripped my KNOX Counter. So be careful if you do not want to void your warranty.
My phone is carrier branded DTM (T-Mobile) and had latest OTA firmware 4.4.4 *ANK4 on it. Back when i did buy my device I decided to debrand my phone as soon as Lollipop comes out.
So I did and flashed in one step from KitKat (T-Mobile) to Lollipop (Open). From what I read a assumed it would be no problem because it's a newer build but in some way it tripped my Knox Counter to 0x1 (3).
I did use Odin 3.09 as suggested by sammobile but ended up with an error (Fail) at the end of the flashing procedure. I downloaded Odin 3.10 and reflashed without any problems. This might be also considered as a reason for tripping the counter (as it says 3). I checked my counter after 2 factory resets afterwards.
Now I'm actually good to root I guess. Be careful.
Click to expand...
Click to collapse
I never heard of this? You tripped Knox with the official firmware? Did you maybe have the wrong options selected in Odin, as you would be the first who is able to trip Knox with official firmware???
I don't know why it tripped it. I haven't tripped it even after using Z3X box.
Everytime I use a firmware from sammobile it never tripped any counter of my phones.
marleyb said:
Did you maybe have the wrong options selected in Odin, as you would be the first who is able to trip Knox with official firmware???
Click to expand...
Click to collapse
Had standard options selected which are "Auto Reboot" and "F. Reset Time".
I might think the trip is not caused by flashing but performing a factory reset afterwards which results in "dm-verity verification failed..." message in the recovery menu. From what I know this error is caused by root which I didn't.
Update: Device is now working as supposed. After two failed attempts to flash the firmware via Kies new it worked on a third time. No error on factory reset.
My assumption is that there went something horribly wrong on first time flashing the firmware via ODIN, which preventet the factory reset from performing as usual. Knox detected that inexplicable status and graded it as modified which tripped the Knox counter then. I have no other explanation for this, maybe the 0.01% got real in my case.
Hello guys, I need help, I update my Note 3 LTE to Lollipop without knox (still 0x0) everythink was fine but then Supersu start scream about update binary files, I gave them update but installation was failed, Supersu want to reset my phone and try again, when I choose restart my Note jump into Bootloop stuck on SAMSUNG logo? Could someone help me? Wipe cache and factory reset on stock recovery didn't help, I just want to make this without change my KNOX because I got still warranty. (Sorry a lot for my english)
before update you forgot to check survival mode in supersu.
try kies or odin
dancapitan said:
before update you forgot to check survival mode in supersu.
try kies or odin
Click to expand...
Click to collapse
I cant use Kies, phone didnt load a system, there is any software to odin which didnt change my knox?
yes ! if u flash with odin latest original rom from sam mobile you'll not trip knox !:good:
Sorry if this is a noob question but I've been away for a while...
I flashed TWRP and rooted my S7 Edge, I also disabled encryption in the process and, of course, tripped the knox counter.
If I download the latest stock fw for my country from sammobile and flash it through ODIN I know it will not reset the counter but will it re-enable encryption of my device?
uishido said:
Sorry if this is a noob question but I've been away for a while...
I flashed TWRP and rooted my S7 Edge, I also disabled encryption in the process and, of course, tripped the knox counter.
If I download the latest stock fw for my country from sammobile and flash it through ODIN I know it will not reset the counter but will it re-enable encryption of my device?
Click to expand...
Click to collapse
Yes. Device will be wiped and encrypted again. Just make sure you use CSC and not HOME_CSC. HOME_CSC doesn't wipe the device, which is what you need to become encrypted.
uishido said:
Sorry if this is a noob question but I've been away for a while...
I flashed TWRP and rooted my S7 Edge, I also disabled encryption in the process and, of course, tripped the knox counter.
If I download the latest stock fw for my country from sammobile and flash it through ODIN I know it will not reset the counter but will it re-enable encryption of my device?
Click to expand...
Click to collapse
yes