I had bought three new screens and digitizers for three broken elephone p7000
I changed the broken with the new one but when i turn the on the phone i only
see purple screen and no picture!!!
I tried and the three new screens with two different motherboards but did not
start
Is there any problem with firmware version? I asked the seller but told me that screens are
tested and good working
Any help please??
Thanks for your time!
Vagelis
Greece
Related
well i went to set my fone on my car seat...and i didnt realize it bounced and it so happend to bounce right when i was closing my door. Well my wizard got caught between the door and the frame of the car...luckily none of the plastic broke...but the lcd screen is all messed up..ill try and post a picture to describe how its messed up
my question is
where can i buy replacement LCD screens? eBay has a seller but he's from hong kong i dont really trust international buys...is there any other sites around that you guys might know?
Replacement Wizard Lcd
Try www.gpsmidlands.co.uk. Cheapest place for replacement screens. Mine cost £55
hmm where do i look under...doesnt seem to have any wizard or any of variants lcds
ehy man im form HK and just today I experienced the dead of my screen...it seems the left/upper corner cannot be aligned strangely the other parts of the screen seems to be ok...I will check where can find a new screen and I will let u know/'''
bye
I cracked my screen about a week after I got my Cingular 8125. Cingular basically told me I was out of luck. I ended up selling the broken unit on eBay, and getting a new one off eBay.
Mattydiah said:
I cracked my screen about a week after I got my Cingular 8125. Cingular basically told me I was out of luck. I ended up selling the broken unit on eBay, and getting a new one off eBay.
Click to expand...
Click to collapse
how much did everything cost you
Hi all,
I have to admit I have a sneaky feeling this should not be here but I'm not sure where to put it... It's not strictly a accessory but anyway, if it is wrong, please do advise.
I'm after anyone here who has or knows of a someone that sells HD2 spares?
I obtained two screen repair HD2s - both have been tampered with previously and while the units both work fine, the front keypad ribbon is broken in two so the keys are not responding.
I have managed to source 2 LCD's but without these buttons, I'm lumbered with two units and two brand new LCD units.
Appreciate any help on this!
Thanks,
Akash
akash_84 said:
Hi all,
I have to admit I have a sneaky feeling this should not be here but I'm not sure where to put it... It's not strictly a accessory but anyway, if it is wrong, please do advise.
I'm after anyone here who has or knows of a someone that sells HD2 spares?
I obtained two screen repair HD2s - both have been tampered with previously and while the units both work fine, the front keypad ribbon is broken in two so the keys are not responding.
I have managed to source 2 LCD's but without these buttons, I'm lumbered with two units and two brand new LCD units.
Appreciate any help on this!
Thanks,
Akash
Click to expand...
Click to collapse
Not sure if this is much help but I did recall seeing a guy on Craigslist in Toronto selling an HD2 in mint condition except for the fact that the glass screen looked like it took a bullet. The LCD was perfect underneath and no scratches anywhere. Not quite sure how someone can do that to it and keep in mint at the same time but anyway it was posted in April and they were asking for around $300 CAN.
Thanks for that suggestion
I have actually been looking around Ebay UK (Where I am) for faulty HD2s but no one will sell them cheaply so...
Bit the bullet and requested a return on the LCD - the seller will refund me the full value back. Just wish I could get these parts as the rest of the unit is mint and given that I've already stripped the screen off (not the easiest task!), it would have been great just to put it back together in a working state.
Thanks again and if anyone does have any other suggestions in getting hold of the keypad, I would appreciate a quick note on it
Few days ago my i dropped n broke touchscreen but it works, lcd is in good shape
so i ordered touchscreen n opened mobile till lcd n i found out my hd 2 is European version and touch screen which i bought was t-mobile version,
now i want to buy lcd+touchscreen already assembled coz not want to mesh with welding touchscreen with lcd
so guys i need your help is it possible to buy t -mobile version of lct+ touchscreen assembly, coz if i will break touchscreen again it will be easier to change touchscreen in t mobile version
guys help me
ray_bharati said:
Few days ago my i dropped n broke touchscreen but it works, lcd is in good shape
so i ordered touchscreen n opened mobile till lcd n i found out my hd 2 is European version and touch screen which i bought was t-mobile version,
now i want to buy lcd+touchscreen already assembled coz not want to mesh with welding touchscreen with lcd
so guys i need your help is it possible to buy t -mobile version of lct+ touchscreen assembly, coz if i will break touchscreen again it will be easier to change touchscreen in t mobile version
guys help me
Click to expand...
Click to collapse
Sorry but not really sure of what you are asking here. are you wanting to buy a LCD screen and digitizer already connected? If this is what you are wanting then yes you can buy them in a combo where they are already together. The only deference between the European combo and the T-Mobile combo is the European combo has to be soldered to the main board and the T-Mobile combo does not. If you do a search in this forum you might find several threads that are very informative on this, I have one that come to mind but it is probably way back in the pages of this forum.
Hi guys,
Unfortunately, my HD2 quit operating again. A good 6 months ago it got repaired (or at least they tried 4 times) for a broken screen (the known digitizer issue)...
Now? The hardware buttons below the screen don't work anymore
As the device was bought in Holland, and repaired by an HTC official partner in Romania... i wonder what I should do.. Have it repaired again or try and get a new (refurbished) one already? Are there any Romanians (I live in your country )here that have experience with cases like this? And how does HTC Romania respond to this?
Thanks in advance,
(unfortunately I have to use my iPhone now )
---
I am here: http://maps.google.com/maps?ll=44.410869,26.099087
Hi all, i have a question
So my hd2 fell and the screen broke,the lcd is still working and so was the digitizer but it stopped a couple of weeks ago.
Now i have the money and i'll buy a new digitizer.
My question is will the glass for the t-mobile version fit my european (or is it international) hd2?
I don't want to buy it just to find out it doesn't fit or something
Thanks in advance.
I read somewhere that Internation hd2 use lcd and digitizer combo that has to be soldered together but mine is click-on.
Is that the same one t-mobile version is using?
On the back of the lcd is says P/N: 60H00300-00P
EDIT: It looks just like this one.
http://www.ebay.com/itm/Touch-Scree...121?pt=LH_DefaultDomain_0&hash=item3f1cf546b9
Size difference
frixx5665 said:
Hi all, i have a question
So my hd2 fell and the screen broke,the lcd is still working and so was the digitizer but it stopped a couple of weeks ago.
Now i have the money and i'll buy a new digitizer.
My question is will the glass for the t-mobile version fit my european (or is it international) hd2?
I don't want to buy it just to find out it doesn't fit or something
Thanks in advance.
Click to expand...
Click to collapse
There s a little bit size difference between the EU HD2 and TmoUS HD2....
It may fit, but u might face compatibility problems
Recommended that you buy the digitizer meant for EU HD2 from ebay Global easybuy
So as to be sure
Post #4 - Not all good advise ...
No size difference between lcd & digitizer on any model of HD2.
Main difference if replacing just the digitizer is fact one type is a solder connector & one a plug connector.
T-Mobile USA version was plug only connector.
EU version can be both depending on early or late manufacture or if been in for repair already it may of been changed to later version .
If have original SPL you can view the type via bootloader. If unsure wise to look first before ordering ...
Loads of info on this of you search forum:
http://forum.xda-developers.com/showthread.php?t=1341927
http://forum.xda-developers.com/search.php?searchid=154235078
you will need a heat gun to separate the two, then you will have to scrap all the double tape off and re-install new to keep the two and the housing together very easy to repair and very easy to break, Hint of advise, I would take the phone to a qualify repair shop for fix.