Related
http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
nice gadget!!
richeazy said:
http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
gillidk said:
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
Click to expand...
Click to collapse
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Ordered mine today (only $60), if it really works as reviews say, it's quite a bargain
Do you still have problems with the rc11 or are they solved ?
send by an 42y old gio junkie™
player911 said:
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Click to expand...
Click to collapse
Did you get it by express delivery or normal delivery
send by an 42y old gio junkie™
I fixed my Measy Air Mouse R11.
To reset the Gyros, you lay it flat and press and hold LEFT ARROW + G for a few seconds... making sure it is flat. Now it works great.
I'm having some weird issues with some misbehaving apps. Root explorer started freaking out. And now my FPse won't use OpenGL for the life of me. I'm interested in trying the CM10 build for it but the operation requirements are bland. Supposedly it requires CWM recovery, which is supplied but doesn't give specifics how or what order or process to get it done.
I have to say that it is a fun unit to work with and chews through FPse roms. I'm surprised how well it runs for a chinese chipset.
Flashing is a bit of a chore and instructions aren't very clear, so I'll post them here:
With the unit OFF:
Insert a paper clip into the reset hole and press it in and HOLD IT down.
Awkwardly insert the MicroUSB-PC cable into the OTG. This will power the unit and it should boot into Flash mode given you've held the paperclip down properly.
Trying to install eGalax Touch Screen linux driver
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
rscreen said:
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
Click to expand...
Click to collapse
Ordered on the 26th for 65$ (actually cost £42 through paypal),
they shipped on the 29th (tracking never worked).
And it arrived on the 6th. So quicker than expected.
I've applied the firmware update which was a slightly newer build of 4.1. Mentioned in both these places (applied the tweaked one from deadhp1 for the play store location fix in case needed)
http://blog.geekbuying.com/index.php/2012/11/03/mk808-mini-pc-firmware-update-on-3th-nov/
http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=13&t=53
It now seems to play any avi / mkv / mp4 i've given it (usually on a usb stick or micro SD). It happily plays avi's over the network (using ES file explorer).
Its definitely better than the out of sync UG802 which wasn't quite right and the power lead came out too easily.
I use the custom stock video app (seems to come with most of the RockChip devices) and MX player (it looks a lot nicer)
I was looking for a device like this one and the reviews are really helpful
Anyone know of GPS that works with these?
jcps said:
I was looking for a device like this one and the reviews are really helpful
Click to expand...
Click to collapse
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Avuja said:
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Click to expand...
Click to collapse
It is a mini PC that has HDMI output. Your TV must have a vacant HDMI input so you can plug the mini PC into it. My TV supports 1080p. And so I can set the output resolution on the mini PC to 1080p. But it also could be set to 720p as well. These don't come with any display so you have to plug it in to your TV or a monitor that supports HDMI. The audio is pushed through the HDMI as well. To control it you can use a USB mouse and/or USB keyboard. Your cheap wireless mouse will work but the USB ports do not have power to them so I've had to use a powered USB hub to make my wireless keyboard work further than a foot away from the USB dongle for the keyboard. The hub also allows you to plug in other devices like a USB camera. But the ones that work are somewhat limited , be aware. Does that help you understand it?
Maxx57 said:
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
Click to expand...
Click to collapse
probably you will need the kernel sources. also, you need root access. that error (directories that get lost after reboot) might be due to yo need to remount the /system partition in rw mode (by default is ro) and perhaps you will neet to do some symlinks on /bin to /system/xbin.
other thing you..must get in considwration is that android is different from linux.. and that you might need to compile the kernel module, such thiing im not sure that is posible from within the device itself...
or.. i just might be way off track, in which case jyst dismiss my answer
Enviado desde mi MB860 usando Tapatalk 2
Maxx57 said:
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
Click to expand...
Click to collapse
I'm very interested to know as well, I have an MK808 and would love to add a GPS dongle.
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
killerskincanoe said:
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
just so you know it doesn't have built in bluetooth.
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
I read up on this one. Good vid review at http://youtu.be/X8pozwuAq7w
Anyone know the spec diff between this and the MX2?
and is geekbuying the best seller for this device or ???
c
h-guy said:
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:24 AM ----------
can anyone comment on this non-support of XBMC for Rockchip? and if not Rockchip, which stick-PC gets it right?
one comment also that I would like more info on is that both iMITO units underperform compared to MK808
"Lack of XBMC support for HD hardware acceleration is a major issue that Rockchip needs to address if they want to keep selling SoC chips to the Stick PC mfgrs. Stick PC makers need 2 take action on this as well and if Rockchip won't play ball, they need to consider alternative SoC. We need more processing power anyway to get close to current smart-phone level and play the latest 3D games."
Morning.
Last week or so I've been trying to get my PS3 Dualshock 3 Sixaxis controller working with my Nexus 7 via the Micro USB port, and I'm about to give up completely.
I've googled enough to make my head spin, so this is pretty much my last hope for a solution. I've tried with 4.1.1, 4.1.2 & 4.2.2.
I've mailed the developers of the apps mentioned below, but have yet to recieve any response. This was done more than just 1-2 days ago.
I've tried with & without rooting.
The controller works fine when connecting it to my computer & Transformer Prime. It's been close to fully charged all the time.
The Gameklip cable & the OTG-cable works. I can access HDD's, flashdrives & even the SD-card on my PSP.
While using the OTG-cable, I've tried with different USB - Mini USB cables.
Sixaxis Controller using Bluetooth works fine, not a single problem there. I can also add my Nexus 7's MAC-address to the controller via the app without any trouble.
USB/BT Joystick Center 8 finds the controller, but refuses to accept any input from it. The same developer has released a joystick analyzer, and it recognizes the correct vendor & product ID of the controller.
The keylayout file exists & is correctly mapped in my usr/keylayout directory. I've also tried using the Transformers keylayout on the Nexus 7.
And here's the kicker, the spare Gamestop Xbox 360 controller I've got laying around works without a problem. Which almost led to me frisbeeing this ****ing thing out the window. And even though it works, it's not a viable alternative for me since it doesn't fit in the Gameklip.
At this point I'm up for crazy ideas, so any help, no matter how far out there, is appreciated.
Thanks for taking the time to read through this, and if you have any ideas that might help, thanks in advance!
retardbatman said:
Morning.
Last week or so I've been trying to get my PS3 Dualshock 3 Sixaxis controller working with my Nexus 7 via the Micro USB port, and I'm about to give up completely.
I've googled enough to make my head spin, so this is pretty much my last hope for a solution. I've tried with 4.1.1, 4.1.2 & 4.2.2.
I've mailed the developers of the apps mentioned below, but have yet to recieve any response. This was done more than just 1-2 days ago.
I've tried with & without rooting.
The controller works fine when connecting it to my computer & Transformer Prime. It's been close to fully charged all the time.
The Gameklip cable & the OTG-cable works. I can access HDD's, flashdrives & even the SD-card on my PSP.
While using the OTG-cable, I've tried with different USB - Mini USB cables.
Sixaxis Controller using Bluetooth works fine, not a single problem there. I can also add my Nexus 7's MAC-address to the controller via the app without any trouble.
USB/BT Joystick Center 8 finds the controller, but refuses to accept any input from it. The same developer has released a joystick analyzer, and it recognizes the correct vendor & product ID of the controller.
The keylayout file exists & is correctly mapped in my usr/keylayout directory. I've also tried using the Transformers keylayout on the Nexus 7.
And here's the kicker, the spare Gamestop Xbox 360 controller I've got laying around works without a problem. Which almost led to me frisbeeing this ****ing thing out the window. And even though it works, it's not a viable alternative for me since it doesn't fit in the Gameklip.
At this point I'm up for crazy ideas, so any help, no matter how far out there, is appreciated.
Thanks for taking the time to read through this, and if you have any ideas that might help, thanks in advance!
Click to expand...
Click to collapse
Sorry for the thread resurrection here but I have searched high and low on the internet and this is the only thing that I find that comes close to the same exact problem I am having. The only difference is I have a galaxy s3 running cyanogenmod 10.2. Same issue on 10.1. I can get a wired 360 controller to work just fine and even a Wii classic controller with a USB adapter to work. No Dualshock 3 though. You ever able to fix this?
I have tried 3 different controllers with my phone so far and nothing works very well.
I have an ATT version of the Note3 running Android 4.3 on Baseband N900AUCUBNB4 - rooted of course.
I tried the Sony Ps3 Dualshock 3 controller with the Sixaxis app, and found the analog sticks worked great and the d-pad worked well in the main android windows, but as soon as I launched a game there was extremely bad lag on all buttons except for the 2 analog sticks. I'm talking a full second and up of delay before the system responds. I tried bluetooth and connecting to USB and it's the same.
I tried the xbox 360 controller with USB connection and tried to use it natively, but it has the exact issue that the Dualshock 3 had.
Fine, I figure maybe It's not meant to be and decided to try the Moga Pro Power which is actually made for android. On this controller, the buttons work great in the A mode, but the analog sticks have a gigantic deadzone in the middle! Not only that but the buttons all feel really weird. Not impressed one bit with this controller. Then I tried the B mode to see if the analog deadzone would go away. It stayed the same, but then the button lag appeared as it had on the PS3 and 360 controllers.
I'm at a loss here. I'm not sure if it's an issue with the stock ROM or what. I'm going to try a new ROM in the meantime but I find it rather odd that I can't find a single person having this issue via google or this forum...
Thoughts?
How do you connect them with phone I wana know ? I will try connecting my nephews xbox 360
Sent from Galaxy Note 3 SM-N9005
thahim said:
How do you connect them with phone I wana know ? I will try connecting my nephews xbox 360
Sent from Galaxy Note 3 SM-N9005
Click to expand...
Click to collapse
a USB on the go cable
Well, after a few weeks of screwing around with the stock ROM and 3 controllers, I decided to try a new ROM. I flashed the firenote ROM and tried my xbox360 controller with the usb cable, and sure enough, it works fantasticly. Only one slight flaw- the green light that indicates which player the controller is pointing to just constantly flashes.
I would also like to say that I contacted Moga customer support a week ago and have not heard any response about the terrible analog sticks, so I returned that thing. A full week and not even a reply!
Update on this: it had nothing to do with the ROM. It's xposed additions module that screwed everything up.
mike02467 said:
Update on this: it had nothing to do with the ROM. It's xposed additions module that screwed everything up.
Click to expand...
Click to collapse
Which one?
Hi, I've got an LG G2 (AT&T D800, unlocked), and I'm trying to use a standard, Microsoft wireless Xbox 360 controller with it for a few games. (Minecraft, Dead Trigger, and some emulators)
I'm running stock 4.4.2, software version D80020y, rooted.
Now, at first it simply wouldn't do anything at all (like it wasn't recognized), but then I followed this thread:
http://forum.xda-developers.com/showthread.php?t=1792531
Now it somewhat works, however, all of the buttons "stick" at random times, and the bumpers rarely work.
I've tried all 4 of my controllers, they all did the same thing.
The OTG cable is confirmed working with a keyboard/mouse, and USB drives, and the wireless reciever (while it is aftermarket and not the official MS version) is confirmed working with my PC.
I've re-done what was written in that thread twice now, making sure everything was done correctly, and I'm still having this issue.
I've googled around, but I must be missing something.
Does anyone know how to fix this?
Thanks!
Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?
i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html
Thanks I will try this when I get off work and will post the results. I hope this works cause I use my device as an emulation station and this is a big problem for me.
Tsibosp said:
...and the continuous connect fix was not working for me(with both new and old version of the program) .
Click to expand...
Click to collapse
What program are you using and what ROM?
Sent from my lavender using XDA Labs
hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for thw MIUI 11 update any day now.
EgyBob said:
i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html
Click to expand...
Click to collapse
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!
Tsibosp said:
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!
Click to expand...
Click to collapse
no problem , happy to help.
as i said before , i haven't tried it myself but maybe someone else can help with that other issue .
you can also post on xiaomi's reddit thread , maybe someone have a solution for it .
ghst7 said:
What program are you using and what ROM?
Sent from my lavender using XDA Labs
Click to expand...
Click to collapse
hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for the MIUI 11 update any day now.
The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?
Tatoh said:
The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?
Click to expand...
Click to collapse
do you have to be rooted for that? I run official MIUI 10, soon 11. I really dont want to bother with roots, custom APKs etc.
Tsibosp said:
Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?
Click to expand...
Click to collapse
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.
EgyBob said:
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.
Click to expand...
Click to collapse
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.
Tsibosp said:
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.
Click to expand...
Click to collapse
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?
EgyBob said:
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?
Click to expand...
Click to collapse
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.
Tsibosp said:
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.
Click to expand...
Click to collapse
thanks for the respond , i got the ps4 controller to work in the emulator PPSSPP . although that's not what i was trying to solve , i wanted to use the controller in games/apps -the ones you download from the play store like FIFA,NFS etc.. - outside the emulator. but i think i'll have to root my phone to remap the touch control for these games.
i'll have to wait for a week to unlock the bootloader then i'll try again after rooting.
thanks again bro <3