Database Users

Data constipation? Irregular data movements? Constant disconnects?

Symptoms
- You cannot maintain a constant data connection. The connection is often lost or dropped.
- HD2 reception indicator dances between G to 3G to H despite showing good reception, and user remaining stationary.
Counter measures - No cabs or registry tweaks needed.
Presented in the order I would try them. If the lower number levels don't work, then move up a level. These are offerred as advice from a UK based HD2 user, though may work for you elsewhere.
LEVEL 1
- Go to Comm Manager > Wireless Controls
- Turn the Data connection Off then On again.
This will usually get you back and running again faster than waiting for the HD2 to sort itself out.
LEVEL 2
- Go to Settings > All Settings > Connections > Advanced Network
- Disable HSDPA/HSUPA
This will stop your phone attempting to use '3.5G' and will mean that you only use 3G.
Remember to re-enable HSDPA/HSUPA when you are in an area with better reception.
LEVEL 3
- Go to Settings > Wireless Controls > Phone - Change phone settings
- Move down to Other Options > Band - Change baseband
- Change Network Type from Auto to GSM
- Change Band frequency from Auto to either GSM (900+1800)+UMTS or GSM (1900+850) . To make the decision, you need to know the GSM frequency your operator uses. If you don't know, you can just try both of the GSM options and see which works. No damage will be done by using the wrong frequency first time, and you can change back.
This will disable 3G and force your phone to use 2G. Most operators have decent 2G networks, so you shouldn't have the disconnects anymore, but you will have slower than 3G potential speeds.
Remember to change your phone back to Auto for both Network Type and Band Frequency when you are in an area with better reception.

Thanks for the heads up... will have to try some of these. I find it most annoying at times...!

Thanks for the advice, I do find those issues annoying. What are the benefits of using 3.5G? If they're aren't any major advantages and turning this off helps then I may as well leave it off.

CHIP STAXMAN said:
LEVEL 1
- Go to Comm Manager > Wireless Controls
- Turn the Data connection Off then On again.
Click to expand...
Click to collapse
The problem with this is that it b*llockses up your push email settings, if you use the phone to get email from an Exchange server. The better approach (assuming standard configuration) is to press and hold the power/end-call hard-button. That brings up a menu of four choices. The last of those is "terminate data connection". Click it. Anything the phone does which requires the data connection after that will automatically reactivate it.

3G 2100
These tricks may solve the issue for many but not for me because I'm in a 3G 2100 only network so I cannot switch to GSM. I will try to disable HSDPA/HSUPA to see if that works though.
The weird thing is that the issue occurs almost exclusively when I'm logged on an IM client and the phone stays in sleep mode a few minutes (say 15 min or so). After I wake up the phone the signal seems ok but the data connection is lost (IM, browsing, mail, weather update, etc.). It doesn't happen every time but very often, several times a day.
If I don't log on any instant messenger app the data connection is stable, especially with the new 1.66 ROM (I tried both Duttty's custom and official). In this case I lose data connection very rarely, in fact I din't even remember the last time I did.
Can anybody provide an explanation for this, what is happening with the connection between the IM server and the phone during sleep?

snerkler said:
Thanks for the advice, I do find those issues annoying. What are the benefits of using 3.5G? If they're aren't any major advantages and turning this off helps then I may as well leave it off.
Click to expand...
Click to collapse
If your network supports it, you should have higher potential data upload and download speeds through using 3.5G (HSDPA/HSUPA).
In reality and every day use, on many networks you probably wouldn't notice the difference between 3G and 3.5G.
I'm on Virgin Mobile, which piggybacks on T-Mobile's network here in the UK. My speedtests in central London, show virtually no difference between me using 2G, 3G and 3.5G!!!! Which is ridiculous. The main difference I get as a HD2 user is much more stable data connection on 2G vs 3G/3.5G.

4G and WiFi Not Compatible?

I had been having problems getting 4G at home and just noticed that if I turn off WiFi, 4G pops right up and as soon as I re-enable WiFi (which connects to my home network) 4G disconnects. Has anyone seen this behavior? When you think about it, it makes perfect sense, and since both are enabled to connect when the other one isn't, the flip-flop is automatic. But it surprised me.

its probably because sprints 4G is based on WIFI. or it just cuts off 4G cus you dont need it anymore

I believe it works the same way as WiFi and EVDO works on older phones. When you turn on WiFi it will use that as your data connection instead of EVDO regardless if it is a crappy WiFi connection.
-------------------------------------
Sent via the Sprint HTC EVO

Yeah, it's actually pretty cool, but if you don't know about it, it gets frustrating. I called Sprint customer service and he had me go through the battery out/in routine and go outside and try, etc. So maybe they don't know about it either!
But it makes sense for Sprint, since their data plan is unlimited and they want to avoid network overloading (are you listening AT&T? LOL). The only thing you miss on WiFi are location-based sevices that rely on GPS (navigation, some weather products, etc.).

dkdontforget said:
its probably because sprints 4G is based on WIFI. or it just cuts off 4G cus you dont need it anymore
Click to expand...
Click to collapse
WiFi and 802.16e aren't all that similar. LOTS of differences between the protocols.
Maybe there's some isolation problems on your device as Sprint is using their 2.5 GHz spectrum holdings for their 4G network.

4g network and 3g network both will shut off when enabling wifi. Why have 2 forms of data going at the same time? Its not gunna use both to double your speeds.
You wont lose any GPS features. Turn on wifi and load up Google Maps, it will find your location exact.
When making calls and sending text it uses 1x so you will still receive everything except for MMS. Maybe they fixed it to where you can receive them even when on wifi with the Evo, not 100% sure.

4g and WiFi are both data only connections. You don't need two data connections simultaneously so it is smart enough to auto disable one to save battery. It would also cause routing problems.

Every phone does this LOL When you switch on Wifi they turn off 2g,3g,4g etc because you can't use 2 data connections at the same time.
I'm curious why you would want 4g and wifi on at the same time?

I thought this was pretty common knowledge (on any Android phone)... And I also thought it was done for battery conservation reasons as much as anything else. WiFi's a simpler point to point connection and from what I understand it sucks less power than 3G or 4G which is constantly checking for additional cell towers in case you've moved, etc.
If you're at home or at work w/a stable WiFi connection you should be able to preserve more battery power by using it, within the settings you can even set it so the phone doesn't revert to 3G when it goes to sleep (the default setting IIRC), otherwise it does this and only jumps back to WiFi when you wake it ('till you're out of range anyway).

I agree with all the comments. And if the Sprint Customer Service guys had said, "Hey, you idiot...it's supposed to do that," then I wouldn't have posted. But the fact that he was as stumped as I was prompted me to post (we all know that Sprint gets all it's info from reading these forums...LOL).

Rogers LTE network APN settings

Hi all-
Can someone on Rogers in Canada please corroborate this info for me?
http://forum.xda-developers.com/showthread.php?p=40906041#post40906041
Basically, it appears that LTE users who want to use wifi hotspot tethering have been kneecapped deliberately by the network; Rogers blocks tethered device traffic on the standard LTEmobile.apn. (except DNS calls, strangely) They tell me to switch to LTEInternet.apn if I want to use wifi tethering.
But when I ask technical support about this, the "LTE APN" they tell me is required doesn't appear to be LTE in anything except name. Two APNs side by side 2 minutes apart in the same physical location give network speeds 8-10x different, and my cellular monitor app shows them negotiating different connections - HSPA+ for one, LTE for the other- that can't just be congestion.
Is this just poor service in my area (seems unlikely) or is this a deliberate crippling of tethered devices by Rogers? I have a 6Gb data plan, and they're telling me I can't use it however I want, at speeds my phone is capable of running!

Network coverage issues or device ?

I'm having some problems with my G2 - I don't have good 3G coverage especially inside and my phone keeps dropping calls when on 3G. It seems the software doesn't reconnect that fast and doesn't switch to 2G when the 3G signal is too low. Is there any way to change the preferred network and stop the device being so agressive at keeping 3G connection?

Settings/networks/tethering & networks/mobile networks/network mode/GSM only.

I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk

axlastro said:
I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Well if you're going to be like that then there's no wonder why there aren't a stream of responses on here with people trying to help you out.
Just remember, you're the one with the problem, so you may want to be a little nicer to those that try to give you help.

I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk

axlastro said:
I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
There isn't a solution as simple as hitting a switch, but you can try the following:
Go into your Dialer and tap in *#*#4636#*#*
This will take you into the Testing Menu
Select 'Phone Information'
Then about half way down you will have a drop down where you can "Set preferred network type:"
This will allow you to choose whether to use 2G or 3G, but more important to your case you can choose how it will react if signal strength is low.
You probably want to select something like "GSM auto (PRL)"
Bare in mind though that this option will reset itself back to original setting each time you reboot the device.
Now I don't know if this will solve your problem, but it is worth testing out.
Here's a list detailing the main available options:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this

Wnderful setting.. amazing speed... performance of handset increased like rocket..
Thanks a lot...

Hi,
After dialing *#*#4636#*#*, it shows up the menu.
But i am not able to select Phone Information option. It says "This application does not work on this device".
Phone info: LG G2 D802 - Rooted - PowerG2 2.1 ROM.
I face frequent network signal drop, I tried CloudyG2 ROM also.
Thanks !

[Q] Help! Diagnose network connection issues

Hi guys
My n9005 has been having mobile connectivity issues for a while now. I'm not very knowledgeable about mobile networking and standards so I need some help diagnosing the problem before I either find a setting to alleviate the troubles or get some hardware replaced. For your reference i think has been caused by dropping my phone quite a few times so there is likely a hardware issue, i just want to better understand it to see if theres a workaround before i go spending money!
My phone works flawlessly when it displays its connect to 4G or H+ networks. However when it drops to 3G it usually does not send or receive any texts, calls, and I have no data connection.
I have fiddled around in the service menus and tried setting the band preferences to GWL, WCDMA & GSM, LTE Only, etc etc, with not much luck either having no connection or having the same issue. For reference I don't have 4G coverage at my home only H+, but when I was on holiday in the middle of no where at the National Park (I live in New Zealand) I had 4G connections the entire time with no dropping.
Now I have no idea what mobile networks use what standards/protocols so if you could recommend a setting change or identify what I should get replaced that would be great!
Cheers