FRP bypass with firmware PH1 - Verizon Samsung Galaxy S7 Edge Questions & Answers

I bought a G935V on ebay with a cracked screen. I replace the screen and powered back on and seemed ok but now I am stuck on FRP screen. The seller sold the phone as is, I just thought that meant broken screen.
Is there anything I can do or am I sol at this point?

Keep trying to unlock it until the phone does a factory reset. Or boot into recovery and do a factory reset.
Sent from my SM-G935V using Tapatalk

I have the same situation. I also bought on ebay.
I changed the firmware to 6.01. (October 2016). It did not help.
No method with youtube works for me. And in my country there is no cdma.
Now I'm looking for a solution. The last option is to carry the guys with programmers ...
I tried the firmware from version U but they are not installed

Redflea said:
Keep trying to unlock it until the phone does a factory reset. Or boot into recovery and do a factory reset.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Unless the device was not updated to nougat, this option is a waste of time. not only the device will be a pain in the guts, it will make you doubt of your skills and life

Related

[Q] Galaxy S5 locked on Reactivation Lock?

Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
verizon phones now come factory unlocked??
This is news to me.
Kies or Odin might allow you to install a new image.
rolozcar said:
Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
Click to expand...
Click to collapse
Pretty sure you're screwed...it's an anti-theft security measure.
http://www.techtimes.com/articles/5...ck-and-find-my-mobile-anti-theft-features.htm
Sent from my SM-G900V using XDA Free mobile app
pego99 said:
verizon phones now come factory unlocked??
This is news to me.
Click to expand...
Click to collapse
This has been the case with 4G phones. It is sim unlocked, as in you can use other carrier's sim cards, not with an unlocked bootloader in case that is what you were thinking.
rolozcar said:
Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
Click to expand...
Click to collapse
You will have to get it from the seller.
It likely wasn't done maliciously nor may they remember even setting it.
IIRC when setting up the phone it is an option that you can enable. Chances are it may be a password they use for many things and my not want to divulge it?
Unfortunately you will have to get ahold of them as only they know the password.
The only other thing I can think of is flashing the ODIN tar. Not sure that this will reset it anyways as when you enable this option there is a message saying that Reactivation lock must be disabled before sending your phone in for service.
9/10 guy probly screwed u for a claim because that feature would have to been activated it wont activate on a reset as it would have asked for password prior to reset and the fact that its asking for the Samsung id is evidence to the fact
Sent from my SM-G900V using XDA Free mobile app
rolozcar said:
Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=60279880&postcount=51
garsax said:
Try this:
http://forum.xda-developers.com/showpost.php?p=60279880&postcount=51
Click to expand...
Click to collapse
This is the second thread you've done this in. Stop finding year old dead threads and posting a link to the solution that was found a year ago. If you want to get your post count up, try posting something useful (like me) in a thread you can contribute to:good:
Breakthough!!!! glitch found
rolozcar said:
Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
Click to expand...
Click to collapse
I found a way to access the devices of my sm-g900v with the build OE1 with this problem. So the bug i found is not complete but, i know that someone could do something with this info. All you need is blue-tooth headset mines are the lg HBS750. First you have to call 911. turn the bluettooth on and Quickly disconnect the call... you should be on the searching for devices.. At this point you connect you headsets and connect to wifi.. and press the speak/call button on the headset. S-voice should pop-up and ask you to connect to wifi (if you didnt follow my directions) if you did, you should be able to open settings are any stock app... i tired to disable from the settings but, it keep re-checking itself. Maybe someone could find out use this access to disable the reactivation lock.
have you find any solution to the reactivation lock?
rolozcar said:
Hello I bought my verizon galaxy s5 yesterday on craigslist knowing verizon phones now come factory unlocked and intended to use it with my T-mobile sim. When I tested the phone everything worked fine but later on when I got home I decided to factory reset it to clean it up and now I am stuck with a "reactivation locked" window asking me for the owners samsung id, I then tried contacting the seller and now he wont respond so I am stuck with it. I have now made research and know that its a security new method on verizon phones. Is there a way to fix/disable this? any input will be greatly appreciated, thanks.
Click to expand...
Click to collapse
if you find anything that WORKS, plz can you post it here, i have the same problem, I bought a G900V, later upgrade to PD1 android 6.0.1 and find the surprise
I've got some phones with a reactivation lock as well. I'll look into above. Any chance you could bring up adb? If so I can give you the adb input commands to force a hard reset via a bug, it may work and bypass reactivation lock as it is a full wipe, but no promises. Otherwise I have a theory for disabling it via a script that can be pushed via adb and executed. I need to see if I have time, cause it needs to be done
Thanks for getting me that far!!!
ive gotten close
GeTex said:
I've got some phones with a reactivation lock as well. I'll look into above. Any chance you could bring up adb? If so I can give you the adb input commands to force a hard reset via a bug, it may work and bypass reactivation lock as it is a full wipe, but no promises. Otherwise I have a theory for disabling it via a script that can be pushed via adb and executed. I need to see if I have time, cause it needs to be done
Thanks for getting me that far!!!
Click to expand...
Click to collapse
I have an s5 on bok3 firmware right now with a samsung reactivation lock lockout without root or unlocked bootloader and no custom recovery
i first went back to bok3 firmware then used the otg usb/cable bug to access the file manager i've also gotten into play store settings phone and couple other things but also i force closed a bunch of apps and then backed into the setup wizard and got phone activating as if it was a new device but alas it failed as i had disabled and/or forced close activation agent. I haven't been able to recreate since. ps you can access lock screen by going to android device manager on the web and using the lock feature to change the lockscreen password. I also discovered samsung account is the issue app for reactivation lock as when i force closed and disabled it setting menu crashes instead of does nothing when you try to do a factory reset in setting or add a samsung account to your device.
perhaps we can install a custom version of the s5 samsung account app to our device i dont have the skills to change it but you might. Just a thought
Reactivtion lock is off!!!!!!!!!!
I booted NCG on PB1 Bootloader
is a new thread on s5 verizon general on xda
im testing it to see if reactivation lock can be circumvented this way will tell you either way as soon as i can
IT IS CONFIRMED WORKING AND REACTIVATION LOCK IS OFF
http://forum.xda-developers.com/ver.../reactivation-lock-off-finally-stuck-t3433342
this is the guide i wrote

Did I make jewellery out of my s7 edge? :S

I have the S7 Edge SM-G935F, which is the exynos version I believe.
It starting with unrooting, which boot looped my device. I have tried samsung kies firmware recovery but the download always stopped at a certain percentage saying an error was found in the dowloaded file. I tried to fix it by flashing what I believed was the stock bootloader with odin but that made my problem worse.
It turns on and shows a red coloured screen, and the voice assistant kicks in to babble but seems to not respond to touch at all. I think I can go into download mode, because I've seen a shop assistant get into it when I took it to see if they can fix it. Unfortunately It would cost 230 euros, which I cannot afford. And in case you are wondering, no I didn't buy the phone. I got it as a birthday gift, as I never owned a smartphone before that.
I loved trying out apps and tweaking the phone with root, but unfortunately I wasn't careful enough.
Is there any hope for me? Thanks in advance if anyone could help me out.
EDIT: Thank you to both replies! I did as you said and I downloaded the correct firmware. It seems the one I flashed before was actually incompatible. Everything works now thought, I lost all data but better than having no phone.
LuckIsWithMe said:
I have the S7 Edge SM-G935F, which is the exynos version I believe.
It starting with unrooting, which boot looped my device. I have tried samsung kies firmware recovery but the download always stopped at a certain percentage saying an error was found in the dowloaded file. I tried to fix it by flashing what I believed was the stock bootloader with odin but that made my problem worse.
It turns on and shows a red coloured screen, and the voice assistant kicks in to babble but seems to not respond to touch at all. I think I can go into download mode, because I've seen a shop assistant get into it when I took it to see if they can fix it. Unfortunately It would cost 230 euros, which I cannot afford. And in case you are wondering, no I didn't buy the phone. I got it as a birthday gift, as I never owned a smartphone before that.
I loved trying out apps and tweaking the phone with root, but unfortunately I wasn't careful enough.
Is there any hope for me? Thanks in advance if anyone could help me out.
Click to expand...
Click to collapse
Go to sammobile.com, create an account & download the latest firmware for SM-G935F. Install Samsung Drivers on pc. Boot device into download mode. Extract the downloaded firmware and use odin to flash it.
In case you don't know there are 2 S7 phones, S7(930F) and S7 Edge(935F) and their firmware files are not exactly interchangeable.
I think you might flash s7 firmware on your s7e since red screen is the same symptoms when you flash S7flat kernel on S7 Edge. The fix is easy, just reflash again with the correct file.
Sent from my SM-G935F using Tapatalk

My nexus 6p is in hard brick

hello to all, my Nexus 6p, after an official update, restarted and stopped on the Google logo. i tried to flesh a firmware stock via fastboot but it does not work. the phone is original with bootloader locked, i can handle it in fastboot mode. is there a way to flesh the stock firmware? In the Nexus with locked bootloader
Thanks
ADB sideload the OTA
I cant enter in recovery only fastboot mode
BLOD?? If you can enter fastboot but not recovery and it never boots passed the google screen you might be boned.
bootloop. logo loop...
I have the same problem does not pass the logo and restart, but I can enter the recovery and fastboot.
all this with the oem blocked.
I clarify that I did not find the system of the dryer nor freezing the telephone.
exp.:crying:
I do not know how you define it ... but my nexus 6p, never unlocked, always kept original, after an ota update, has remained fixed on the google logo, with the key combination i go only in fastboot mode .. ...strange? but it is so...
how do you call it? hard brick? soft brick?
for me it's hard brick since i can not flesh the firmware ...
Fun with Warranties
iaio72 said:
hello to all, my Nexus 6p, after an official update, restarted and stopped on the Google logo. i tried to flesh a firmware stock via fastboot but it does not work. the phone is original with bootloader locked, i can handle it in fastboot mode. is there a way to flesh the stock firmware? In the Nexus with locked bootloader
Thanks
Click to expand...
Click to collapse
I was a die hard and avid 6P fan. It was literally the best phone I have ever used...when it worked.
When I was still under Huawei's 1 year manufacturer warranty I ended up sending it in twice. Each time they sent me a new handset as they couldn't fix it.
Once I was off of Huawei's warranty I had to deal with my Square Trade insurance. They couldn't fix it either and opted to send me a check. I only bought the phone once but ended up owning three different handsets over the course of less than a year and a half.
Your best bet, in my experience, is if you're still under warranty send it in and get a new one. Huawei's US based customer service was nothing but excellent every time I interacted with them.
Good Luck,
Ben
thanks for your message, my nexus is still under warranty, sent to huawei italia, the phone I picked up after a month, they could not fix it because it is not an Italian guarantee but a European guarantee, they told me to contact the shop where I bought it, but the store is closed for bankruptcy ...
my only way to resuscitate the phone, I think I'm getting a tools that installs the firmware, having the bootloader locked ...
iaio72 said:
thanks for your message, my nexus is still under warranty, sent to huawei italia, the phone I picked up after a month, they could not fix it because it is not an Italian guarantee but a European guarantee, they told me to contact the shop where I bought it, but the store is closed for bankruptcy ...
my only way to resuscitate the phone, I think I'm getting a tools that installs the firmware, having the bootloader locked ...
Click to expand...
Click to collapse
That sound sketchy!
Don't accept such an answer that your phone is still under guaranty but not in Italy!
Huawei are an international company.
Use this link with your IEMI to verify your device is under warranty and if it is simply contact Huawei UK for instance.
http://consumer.huawei.com/us/support/warranty-query/
Checked with them last week and they agreed to fix my device free of charge.
http://consumer.huawei.com/en/contact-us/

S6 Edge Plus Error Loading Stock Rom

Hi peoples,
I sold my S6 Edge Plus (SM-G928i) phone on eBay. The buyer claimed it was faulty and sent it back.
When I got it back, he had factory reset it, but he had left his Google account on the phone, as well as turned on FRP lock.
I tried to flash it back to the stock Rom, I get this error:
An error has occurred while updating the device software use the emergency recovery in Smart Switch.
I then run Smart Switch and it asks me for a recovery code.
Is there a way I can fix this, or has the eBayer bricked my phone?
Thanks heaps
Dazza
I would assume there is a block on software altering while FRP lock is tripped. Maybe you could flash TWRP, wipe everything, and *maybe* that would work, but you would end up with tripped knox if it wasn't already tripped.
Odin
fonefreakz said:
Hi peoples,
I sold my S6 Edge Plus (SM-G928i) phone on eBay. The buyer claimed it was faulty and sent it back.
When I got it back, he had factory reset it, but he had left his Google account on the phone, as well as turned on FRP lock.
I tried to flash it back to the stock Rom, I get this error:
An error has occurred while updating the device software use the emergency recovery in Smart Switch.
I then run Smart Switch and it asks me for a recovery code.
Is there a way I can fix this, or has the eBayer bricked my phone?
Thanks heaps
Dazza
Click to expand...
Click to collapse
Odin should work with a firmware push

Well, that didn't go well

Tab 5se Stock firmware
So I bought a 3rd 5se from a third party, all I checked for was for FRP lock, well it wasn't locked, but when I got it home and rebooted, it says is has a unlocked bootloader. So I hard factory reset it and now it states that only stock firmware can be installed in boot and won't go any further.
So I'm guessing I need to use ODIN to flash a factory ROM but I'm not sure which one as I can't seem to find a USA one on Sammoble, I do see a Canada one though.
Which version of ODIN should I use (WIN 10)
Which ROM, I'm in the USA, WIFI ONLY SM-T720, country code ?
Any other tips, as I haven't flashed anything in almost a decade probably.
Need to get this back to all stock, help
You want the XAR country code version which is the US rom. For Odin, use the newest version for our tablet. Good luck.
puredigital said:
Tab 5se Stock firmware
So I bought a 3rd 5se from a third party, all I checked for was for FRP lock, well it wasn't locked, but when I got it home and rebooted, it says is has a unlocked bootloader. So I hard factory reset it and now it states that only stock firmware can be installed in boot and won't go any further.
So I'm guessing I need to use ODIN to flash a factory ROM but I'm not sure which one as I can't seem to find a USA one on Sammoble, I do see a Canada one though.
Which version of ODIN should I use (WIN 10)
Which ROM, I'm in the USA, WIFI ONLY SM-T720, country code ?
Any other tips, as I haven't flashed anything in almost a decade probably.
Need to get this back to all stock, help
Click to expand...
Click to collapse
I use Frija instead of Sammobile to get the latest stock. Just use SM-T720 as the model and XAR as the CSC. If you search for how to unlock the bootloader, you can use the same proceedure to relock it. It should perform a factory reset as part of the process and you might not need to reflash a ROM.
Not sure..
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
lewmur said:
I use Frija instead of Sammobile to get the latest stock. Just use SM-T720 as the model and XAR as the CSC. If you search for how to unlock the bootloader, you can use the same proceedure to relock it. It should perform a factory reset as part of the process and you might not need to reflash a ROM.
Click to expand...
Click to collapse
puredigital said:
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
Click to expand...
Click to collapse
The only time a ran into a situation where I couldn't turn off that tablet, I just had to put it aside for a day or so till the battery ran down. Then use the method of holding both vol up and down, and NOT power, and then plugging in the cable from the PC. Must be from PC and not charger.
puredigital said:
Since the device won't turn off, restart nor go into download mode
Aqua blue sorta cyan screen. Top in red (like a terminal response) says," Only official released binaries are allowed to be flashed (vbmeta)"
Then on main screen in center;
Security Error: This phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support
Click to expand...
Click to collapse
I ran into this recently when I went back to stock to get the fingerprint for Magisk Module and then went back to Lineage. You just need to Odin the factory firmware. The tablet will turn off, I think the key combination to force it off is power and volume down? Its been a few weeks, but I was able to get back into download mode. I found other threads for samsung phones that had this same issue and basically used them as rough guides.
As mentioned you just need to use XAR ROMs, your box should say XAR. I believe both Canada and Cellular South ROMs will come up as XAR roms IIRC?
Bruh. I had the same issue and you will not be able to flash your way around and FRP lock. I found a guy on eBay to remove the FRP lock and NOT through flashing. For $10 is was done in 10 minutes. I get if you want to figure it out. I'm a flasher and love to figure this **** out too but with a recent update Samsung blocks this. Trust me. Spend $10 and it's done. Also many people say they can do this on eBay. I only recommend this guy: https://www.ebay.com/itm/273424666857. Just select a new auction of his and message him.
Sent from my SM-T720 using Tapatalk
elcidroyale said:
Bruh. I had the same issue and you will not be able to flash your way around and FRP lock. I found a guy on eBay to remove the FRP lock and NOT through flashing. For $10 is was done in 10 minutes. I get if you want to figure it out. I'm a flasher and love to figure this **** out too but with a recent update Samsung blocks this. Trust me. Spend $10 and it's done. Also many people say they can do this on eBay. I only recommend this guy: https://www.ebay.com/itm/273424666857. Just select a new auction of his and message him.
Sent from my SM-T720 using Tapatalk
Click to expand...
Click to collapse
He said he checked to make sure this was not the FRP lock. Assuming this is the same message I got which says only official binaries can be flashed, please take this to a service center and it there maybe a cost involved (obviously I'm paraphrasing), you can fix it with Odin. I was on the latest firmware as well, as I updated fully to get the fingerprint for the MagiskHide module. This sounds like a different issue, to me.
I mean if that works it's $10 well spent I guess.
Oh my apologies as I misread his post. I just saw "FRP" and chimed in. Hope he gets it sorted out.
OhioYJ said:
He said he checked to make sure this was not the FRP lock. Assuming this is the same message I got which says only official binaries can be flashed, please take this to a service center and it there maybe a cost involved (obviously I'm paraphrasing), you can fix it with Odin. I was on the latest firmware as well, as I updated fully to get the fingerprint for the MagiskHide module. This sounds like a different issue, to me.
I mean if that works it's $10 well spent I guess.
Click to expand...
Click to collapse
Almost !
Well, I finally reflashed the device with factory stuff, it's working fine now, no locks, except now it tells me the bootloader is unlocked on boot. I flashed it with Odin, no options, just loaded the 4 files and done.
How do I get this to STOCK, out of the box status. Steps ?

Categories

Resources