I wanted to root the phone, unlocked the bootloader but flashed incorrect TWRP version and it didn't see SuperSU zip file in the memory. Then I decided to give it up, lock the bootloader back and bring the phone to its initial genuine state. However, the "3-button flash method" didn't work. I downloaded FullOTA zip of B225C636 firmware, unzipped it and moved "UPDATE.APP" file to dload folder in the phone. After using the "3-button method" the phone said "Installation package doesn't exist". Then I made a factory reset from phone settings... and got a non-booting device. It goes to eRecovery which asks me if I want to get an update via Wi-Fi but finds nothing. I entered fastboot mode and flashed boot.img, recovery.img and system.img via ADB Run but nothing changed. So now I can only enter fastvoot or eRecovery. How can I restore the phone? Please help, I understand it's all my fault but I am a newbie with Huawei devices as I was using Samsung where it was much easier before.
AxelRage92 said:
I wanted to root the phone, unlocked the bootloader but flashed incorrect TWRP version and it didn't see SuperSU zip file in the memory. Then I decided to give it up, lock the bootloader back and bring the phone to its initial genuine state. However, the "3-button flash method" didn't work. I downloaded FullOTA zip of B225C636 firmware, unzipped it and moved "UPDATE.APP" file to dload folder in the phone. After using the "3-button method" the phone said "Installation package doesn't exist". Then I made a factory reset from phone settings... and got a non-booting device. It goes to eRecovery which asks me if I want to get an update via Wi-Fi but finds nothing. I entered fastboot mode and flashed boot.img, recovery.img and system.img via ADB Run but nothing changed. So now I can only enter fastvoot or eRecovery. How can I restore the phone? Please help, I understand it's all my fault but I am a newbie with Huawei devices as I was using Samsung where it was much easier before.
Click to expand...
Click to collapse
U have to flash back Stock Recovery before u can flash FullOTA. U cant flash stock firmware with TWRP.
Sent from my LON-L29 using XDA Labs
Mostar088 said:
U have to flash back Stock Recovery before u can flash FullOTA. U cant flash stock firmware with TWRP.
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.
AxelRage92 said:
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.
Click to expand...
Click to collapse
:good:
Sent from my LON-L29 using XDA Labs
I Have the same problem
please help me
I have the same problem
what DNS did you used to fix ??
AxelRage92 said:
Thanks, I tried to flash stock recovery back via ADB Run but it didn't work. The phone was still rebooting into eRecovery partition asking to update via Wi-Fi.
I solved the problem in other way, by setting appropriate DNS in the DHCP section on my Wi-Fi router and then pulling clean B225C636 FullOTA to update server with PC version of Huawei Firmware Finder. Then booted into eRecovery and the process started. After flashing I got my stock recovery back and performed wipe data/factory reset. Now the phone works normally with a locked bootloader as I wanted.
Click to expand...
Click to collapse
Hey Axel,
im in a same boat as you where i cannot access stock recovery and always presented with erecoery asking to update via wifi.
Any chance you can assist and provide further detail on your solution?
heatl0rd said:
Hey Axel,
im in a same boat as you where i cannot access stock recovery and always presented with erecoery asking to update via wifi.
Any chance you can assist and provide further detail on your solution?
Click to expand...
Click to collapse
Hi there,
1) Firstly, you need to install the desktop version of Firmware Finder (download here).
2) Then go to the admin panel of your router, enter DHCP section and put 81.177.139.39 as primary and secondary DNS. Write down your original DNS (if any) to restore it later. Make sure that DHCP is enabled.
3) Run Firmware Finder. Open "Common base" tab, enter your model into search window and copy the link for the desired firmware from "Changelog" (see below). You should select the FullOTA version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4) Click the round button with a cloud on top of Firmware Finder to open ProxyServer window. Paste the URL you've copied from changelog to this window, click "Set" and then "Register for update" (see below).
5) Reboot your phone to stock eRecovery and connect to your Wi-Fi network. The download and installation should start now.
If the phone is stuck on boot logo after completion, boot into standard Recovery (VolUp + Power) and tap "Wipe data/factory reset". Now the phone should boot up.
Don't forget to restore the DNS in your router's settings.
Hope that helps!
AxelRage92 said:
Hi there,
I managed to find another thread that give me the same instructions as you did. But no matter what i do i keep getting package info failed.
I've also paid for funkyhuawei and get the same issue. I know my DNS is correct but dont know why it still fails.
Ideas?
Click to expand...
Click to collapse
heatl0rd said:
AxelRage92 said:
Hi there,
I managed to find another thread that give me the same instructions as you did. But no matter what i do i keep getting package info failed.
I've also paid for funkyhuawei and get the same issue. I know my DNS is correct but dont know why it still fails.
Ideas?
Click to expand...
Click to collapse
Hmm... Looks strange. This is my first Huawei and I didn't face up with the issue you've described so I can't even figure out the reason... I'd like to know what's the problem with your phone too. Which version and region did you choose in FF? Huawei deletes some of them after a while. Also, maybe there are some ports/services blocked by your inet provider or router?
Click to expand...
Click to collapse
AxelRage92 said:
heatl0rd said:
Hmm... Looks strange. This is my first Huawei and I didn't face up with the issue you've described so I can't even figure out the reason... I'd like to know what's the problem with your phone too. Which version and region did you choose in FF? Huawei deletes some of them after a while. Also, maybe there are some ports/services blocked by your inet provider or router?
Click to expand...
Click to collapse
i have a chinese lon-al00, trying to go to l29
i made the mistake of restoring a oeminfo file for a MHA-L29C636 then tried flashing a update.app via dload - realised it didnt work because i put the dload on a usb with OTG connection instead of a ext/int sd (mate 9 pro dosnt have sd)
Then all of a sudden i lost TWRP, FRP and PHONE is now locked.
Cant boot into system, can only access erecovery and stock recovery dosnt exist anymore.
sighs
Click to expand...
Click to collapse
heatl0rd said:
AxelRage92 said:
i have a chinese lon-al00, trying to go to l29
i made the mistake of restoring a oeminfo file for a MHA-L29C636 then tried flashing a update.app via dload - realised it didnt work because i put the dload on a usb with OTG connection instead of a ext/int sd (mate 9 pro dosnt have sd)
Then all of a sudden i lost TWRP, FRP and PHONE is now locked.
Cant boot into system, can only access erecovery and stock recovery dosnt exist anymore.
sighs
Click to expand...
Click to collapse
Oh, you may have corrupted some system data. MHA-L29 is the usual Mate 9, not Pro, and FF seems not to recognize the device you need to restore properly. Maybe you should consider giving the phone to service...
Click to expand...
Click to collapse
AxelRage92 said:
heatl0rd said:
Oh, you may have corrupted some system data. MHA-L29 is the usual Mate 9, not Pro, and FF seems not to recognize the device you need to restore properly. Maybe you should consider giving the phone to service...
Click to expand...
Click to collapse
if i could just get twrp on the phone again i could restore the oeminfo i backed up from the original phone. But fastboot wont let me unlock the phone with the original code.
Click to expand...
Click to collapse
heatl0rd said:
AxelRage92 said:
if i could just get twrp on the phone again i could restore the oeminfo i backed up from the original phone. But fastboot wont let me unlock the phone with the original code.
Click to expand...
Click to collapse
As far as I know, the bootloader unlock code is unique and is stored in "nvme" file located in /dev/block/platform/hi_mci.0/by-name/. Maybe that file was corrupted too or OEM unlock in developer options has gone off.
P.S. The dload (3 buttons) method doesn't work on Android 7 and above. It doesn't matter if you use internal memory or OTG, it will fail eventually. That was one of my mistakes that led to bricking the phone. Never try that again.
Click to expand...
Click to collapse
AxelRage92 said:
ok i managed to get some progress.
I ended up using firmware finder to flash a mha firmware onto my lon phone because i had installed a mha oeminfo.
Im hoping once this works i can somehow flash twrp and restore the original oem i have.
I just hope it will let me unlock the BL. Will report back in a hour or two.
Click to expand...
Click to collapse
heatl0rd said:
AxelRage92 said:
ok i managed to get some progress.
I ended up using firmware finder to flash a mha firmware onto my lon phone because i had installed a mha oeminfo.
Im hoping once this works i can somehow flash twrp and restore the original oem i have.
I just hope it will let me unlock the BL. Will report back in a hour or two.
Click to expand...
Click to collapse
Is there any progress?
Отправлено с моего GT-I9502 через Tapatalk
Click to expand...
Click to collapse
Related
This is guide is how l am solved this error on my HTC Desire 816 Dual CID HTC_622 but l think this gonna work for most users with unlocked bootloader
IMPORTANT NOTICE:EVERYTHING I WROTE HERE I DONE ON MY PHONE.I AM NOT GONNA BE RESPONSIBLE IF YOUR PHONE GET BRICKED OR SOMETHING LIKE THAT.
1: Make sure you have Lollipop update available for your phone
2: Download update to your phone,update will be placed in Download folder in your phone internal storage.
3: Extract OTA update file on your pc.Open it with WinRar or some other zip\rar extract program.Find file firmware.zip inside and extract it to your pc.How again open file firmware.zip and inside look for recovery.img file and extract it too to your pc
4: How you need to flash extracted recovery.img file via fastboot.Boot phone in bootloader mode and flash new recovery.
5: Relock your bootloader.
6:Reboot your phone now.Again download update for your phone,and try to flash OTA update again:fingers-crossed:
HTC A5_DUG Stock Recovery Mega link: https://mega.co.nz/#!aBkGyRLK!LcRMMPTF7hhaUTUNxJBZ4FJbF3QMhLtWswW1Vxvn2YI
Thank you for your useful tips.
I will try and feedback soon.
Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)
OronDF343 said:
--snip--
Click to expand...
Click to collapse
If anyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)
OronDF343 said:
Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)
Click to expand...
Click to collapse
l know that you dont have to relock bootloader but l want to lock it just to be sure:laugh:
Aimbot91 said:
l know that you dont have to relock bootloader but l want to lock it just to be sure:laugh:
Click to expand...
Click to collapse
I am trying this way so i'll tell you if it works. I hope finally this will work
ctnerdem said:
I am trying this way so i'll tell you if it works. I hope finally this will work
Click to expand...
Click to collapse
Ok:fingers-crossed:
Aimbot91 said:
Ok:fingers-crossed:
Click to expand...
Click to collapse
it gives me this error every time i try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ctnerdem said:
it gives me this error every time i try.
Click to expand...
Click to collapse
Are you used OTA for your deviceMaybe your OTA zip file get corupted?
Yes I used ota for update but I don't understand this error what it means
Aimbot91 said:
This is guide is how l am solved this error on my HTC Desire 816 Dual CID HTC_622 but l think this gonna work for most users with unlocked bootloader
IMPORTANT NOTICE:EVERYTHING I WROTE HERE I DONE ON MY PHONE.I AM NOT GONNA BE RESPONSIBLE IF YOUR PHONE GET BRICKED OR SOMETHING LIKE THAT.
1: Make sure you have Lollipop update available for your phone
2: Download update to your phone,update will be placed in Download folder in your phone internal storage.
3: Extract OTA update file on your pc.Open it with WinRar or some other zip\rar extract program.Find file firmware.zip inside and extract it to your pc.How again open file firmware.zip and inside look for recovery.img file and extract it too to your pc
4: How you need to flash extracted recovery.img file via fastboot.Boot phone in bootloader mode and flash new recovery.
5: Relock your bootloader.
6:Reboot your phone now.Again download update for your phone,and try to flash OTA update again:fingers-crossed:
HTC A5_DUG Stock Recovery Mega link: https://mega.co.nz/#!aBkGyRLK!LcRMMPTF7hhaUTUNxJBZ4FJbF3QMhLtWswW1Vxvn2YI
Click to expand...
Click to collapse
How to Flash the file exactly ??
OronDF343 said:
Thanks a lot! It worked for me
Note that you don't have to relock the bootloader, it worked with it unlocked.
Also I heard it is recommended to wipe dalvik cache and cache partition after update.
There are two rules about which recovery you can use:
1) You must use the recovery for your exact model! It must also be from the same region! (recovery for A5_DUG Europe won't work for you if you have A5_DUG Asia_HK, or A5_UL any, etc.)
2) You must use the recovery from the version you are currently at OR the one you are updating to! (the recovery from 1.56.708.2 won't work if you are updating from 1.57.708.1 to 2.34.708.1, etc.)
Click to expand...
Click to collapse
Thanks for the info. But
How to know which recovery do i have?
OronDF343 said:
If anyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)
Click to expand...
Click to collapse
Worked a charm and saved me a lot of trouble. Thank you very much.
/M
ctnerdem said:
it gives me this error every time i try.
Click to expand...
Click to collapse
I got the same error on my A5-UL when updating the OTA. Tried installing Google Books, but the same error happens.
!!~spearhead~!! said:
I got the same error on my A5-UL when updating the OTA. Tried installing Google Books, but the same error happens.
Click to expand...
Click to collapse
I had a very similar error.
my guess is, because my phone is unlocked and modified using Link2SD and Xposed, there have been changes to the system. so It might be a good idea to flash an untouched 4.4.42 nandroid before trying to update.
That's what I did and I could update without a problem
Stock recovery ?
OronDF343 said:
If anyyone has Desire 816 dual sim A5_DUG Asia_HK you can use the recovery image that I extracted. (Attached in two parts)
Click to expand...
Click to collapse
hello ...........
I'm stuck on STOCK RECOVERY
After extracting OTA file and all that ........ I too got recovery.img file
but i dont understand how to use that file to solve the red triangle issue\
please help me !!
Chary Harish said:
hello ...........
I'm stuck on STOCK RECOVERY
After extracting OTA file and all that ........ I too got recovery.img file
but i dont understand how to use that file to solve the red triangle issue\
please help me !!
Click to expand...
Click to collapse
you copy that recovery.img file to the folder where you keep your ADB/Fastboot files. then you reboot to bootloader and put your device in fastboot mode. then open a command prompt in your fastboot folder on your computer and type:
Code:
fastboot flash recovery recovery.img
unexpected contents
Stucked passed 3 nights trying ,I unrooted my phone than installed custom recovery and tried but it says system/apps/... Has unexpected contents status 7 I don't have nandroid backup can anyone help me my device a5 dug europe
Ali_5don said:
Stucked passed 3 nights trying ,I unrooted my phone than installed custom recovery and tried but it says system/apps/... Has unexpected contents status 7 I don't have nandroid backup can anyone help me my device a5 dug europe
Click to expand...
Click to collapse
the error is because you had modified your old Rom(i,e, definitely uninstalled things from system) so it fails system check. you can find clean unchanged nandroid backups of 1.58.401 on XDA
:good:
seekfind said:
the error is because you had modified your old Rom(i,e, definitely uninstalled things from system) so it fails system check. you can find clean unchanged nandroid backups of 1.58.401 on XDA
Click to expand...
Click to collapse
I tried but can't find a nandroid backup if u have a link than can u post bro I am browsing [http://forum.xda-developers.com/desi...l-sim-t3030958]. Have a look at it! http://forum.xda-developers.com/desire-816/general/fresh-htc-desire-816-a5dug-dual-sim-t3030958 will this work but its cid and myn is europ
Hi All, I tried to root my p8 lite manually By following this method:
1) Unlocked Bootlocker.
2) flashed the custom recovery image to install the root binary files With this the screen turned completely black)
3)typed ''adb push UPDATE-SuperSU-v2.46.zip /su.zip''
4)typed ''adb shell /sbin/recovery –update_package=/su.zip''
5) used ''fastboot flash recovery stockrecovery.img''
After pushing SuperSU update, my phone turned on once. I tried to enable debug mode but it was greyed out.
Then I checked the root status and rootchecker said: ''Not properly rooted''. I still installed superSU and tried to update binary,but update failed and I had to reboot the phone. Since that time, the phone doesn't turn on. It keeps restarting for 2 or three times and then stops at black screen. I flashed cwm.img using fastboot and tried to solve the problem with ADB sideload but it didn't work.
I downloaded different Upgrades for my software and tried to Install them by placing thrm in dload of memory card,but that didn't work as well.
I have tried Most Of the methods available to solve this issue but Failed. I am in need of serious help here.
salmanabdullah926 said:
Hi All, I tried to root my p8 lite manually By following this method:
1) Unlocked Bootlocker.
2) flashed the custom recovery image to install the root binary files With this the screen turned completely black)
3)typed ''adb push UPDATE-SuperSU-v2.46.zip /su.zip''
4)typed ''adb shell /sbin/recovery â??update_package=/su.zip''
5) used ''fastboot flash recovery stockrecovery.img''
After pushing SuperSU update, my phone turned on once. I tried to enable debug mode but it was greyed out.
Then I checked the root status and rootchecker said: ''Not properly rooted''. I still installed superSU and tried to update binary,but update failed and I had to reboot the phone. Since that time, the phone doesn't turn on. It keeps restarting for 2 or three times and then stops at black screen. I flashed cwm.img using fastboot and tried to solve the problem with ADB sideload but it didn't work.
I downloaded different Upgrades for my software and tried to Install them by placing thrm in dload of memory card,but that didn't work as well.
I have tried Most Of the methods available to solve this issue but Failed. I am in need of serious help here.
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8lite/help/huawei-p8-lite-stock-recovery-t3387363/page2
You should find everything you need in this thread to unbrick. If thats done come back for root
Lordbannakaffalatta said:
http://forum.xda-developers.com/p8lite/help/huawei-p8-lite-stock-recovery-t3387363/page2
You should find everything you need in this thread to unbrick. If thats done come back for root
Click to expand...
Click to collapse
Will the European versions of ROMs work for Me? TWRP doesn't work on my device. Now I am going to Flash the Batch file For B052. Let's see if it works...
salmanabdullah926 said:
Will the European versions of ROMs work for Me? TWRP doesn't work on my device. Now I am going to Flash the Batch file For B052. Let's see if it works...
Click to expand...
Click to collapse
Yes but you have to change vendors (sokkoban has a thread about it)
Lordbannakaffalatta said:
Yes but you have to change vendors (sokkoban has a thread about it)
Click to expand...
Click to collapse
But for that TWRP is required as mentioned in the thread. Whenever I flash TWRP, my phone gets stuck at huawei logo so TWRP doesn't work on my phone.
Ok I executed the .bat file with my phone connected to PC in fastboot mode and it worked for me. Thanks a lot. Now need to root my device.
.
salmanabdullah926 said:
But for that TWRP is required as mentioned in the thread. Whenever I flash TWRP, my phone gets stuck at huawei logo so TWRP doesn't work on my phone.
But If you know how to make it work then please let me know.
Click to expand...
Click to collapse
seems like your using the wrong TWRP.
your phone is a ALE-l21? isn't it? (settings -> about phone)
if so try using this twrp
unzip it and click the install file. make sure your phone is connected and usbdebugging is activated.
try to see what happens
Lordbannakaffalatta said:
seems like your using the wrong TWRP.
your phone is a ALE-l21? isn't it? (settings -> about phone)
if so try using this twrp
unzip it and click the install file. make sure your phone is connected and usbdebugging is activated.
try to see what happens
Click to expand...
Click to collapse
My phone is unbricked( though downgraded), Thanks A lot. Now please tell me the procedure for rooting.
salmanabdullah926 said:
My phone is unbricked( though downgraded), Thanks A lot. Now please tell me the procedure for rooting.
Click to expand...
Click to collapse
Ok, so you wanna be on marshmallow of course...
First of all... you have to update to the latest build B564 to do this you have to have the original recovery (NO TWRP)
then if you're on b564 install twrp and flash zip 1 first with twrp
reboot and then flash zip 2
you should be rooted
You can copy the eu.chainfir.supersu-1 folder from data/app
to system/app if you like (rwx r-x r-x permissions)
and reboot again.
If you want the original recovery file tell me the build number that you're on and i will give you a link to the file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are the details of my phone.
And also how am I supposed to upgrade my phone?
My phone's USB debugging option is still greyed out and can't be enabled.
I didn't use TWRP, I had CWM recovery but it was gone when I tried to unbrick my phone by downgrading.
Now when I press power button while holding vol up and vol down, there appears a setup saying Huawei software upgrading( This process reaches up to 90% and then stucks ).
Sent from my ALE-L21 using XDA-Developers mobile app
I installed B052 Firmware. Now I got the Balong bug too.
Lordbannakaffalatta said:
Ok, so you wanna be on marshmallow of course...
First of all... you have to update to the latest build B564 to do this you have to have the original recovery (NO TWRP)
then if you're on b564 install twrp and flash zip 1 first with twrp
reboot and then flash zip 2
you should be rooted
You can copy the eu.chainfir.supersu-1 folder from data/app
to system/app if you like (rwx r-x r-x permissions)
and reboot again.
If you want the original recovery file tell me the build number that you're on and i will give you a link to the file.
Click to expand...
Click to collapse
I got the balong bug in my phone. And I also can't find a thread about vendors. Please assist me with that.
Sent from my ALE-L21 using XDA-Developers mobile app
salmanabdullah926 said:
I got the balong bug in my phone. And I also can't find a thread about vendors. Please assist me with that.
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
this is because your phone was branded before you flashed (carrier lock. no big deal) where getting there
so the steps you need to do are simpel
this will cause a factory reset!!!
remember the flash zip i send you? it contains a file named cust.img
copy that one to your sd card or internal storage in a new folder that you name dload and rename the file to UPDATE.APP
(make sure it DOESN'T got the .img file extensions)
go to settings -> updater and press the menu button (at the bottom) then select "local update"
then select UPDATE.APP and wait until it finish and reboot
after taht it should say c432B056 and you can proceed to update.
MAKE SURE YOU DONT HAVE ROOT OR TWRP ISNTALLED.
I have TWRP right now so first I'll flash the recovery.img and then copy the cust file. Right?
Sent from my ALE-L21 using XDA-Developers mobile app
Lordbannakaffalatta said:
this is because your phone was branded before you flashed (carrier lock. no big deal) where getting there
so the steps you need to do are simpel
this will cause a factory reset!!!
remember the flash zip i send you? it contains a file named cust.img
copy that one to your sd card or internal storage in a new folder that you name dload and rename the file to UPDATE.APP
(make sure it DOESN'T got the .img file extensions)
go to settings -> updater and press the menu button (at the bottom) then select "local update"
then select UPDATE.APP and wait until it finish and reboot
after taht it should say c432B056 and you can proceed to update.
MAKE SURE YOU DONT HAVE ROOT OR TWRP ISNTALLED.
Click to expand...
Click to collapse
I tried this procedure , applied local update, then Phone reboots and a setup appears saying Huawei software updating. But this process completes only to 5% and then An error appears '' Update Failed''. This Procedure Has FAILED.
salmanabdullah926 said:
I tried this procedure , applied local update, then Phone reboots and a setup appears saying Huawei software updating. But this process completes only to 5% and then An error appears '' Update Failed''. This Procedure Has FAILED.
Click to expand...
Click to collapse
sorry this file. unrar it. leave it in the folder put in on sd card. ans local update
Lordbannakaffalatta said:
sorry this file. unrar it. leave it in the folder put in on sd card. ans local update
Click to expand...
Click to collapse
It finally worked. Now upgrading to B170.:good:
salmanabdullah926 said:
It finally worked. Now upgrading to B170.:good:
Click to expand...
Click to collapse
sorry it took so mlong... i had tto test it first myself
Lordbannakaffalatta said:
sorry it took so mlong... i had tto test it first myself
Click to expand...
Click to collapse
Now should I proceed with root? And How to update to B564?
salmanabdullah926 said:
Noqw shuld I proceed with root?
Click to expand...
Click to collapse
which version are you on? i would recommend going to marshmallow first (b564)
if your stuck at b194 download b560 from here
and unzip it put it in your sd card in a folder named dload and do a local update.
after that you upgrade to the latest version (b564)
than you take the twrp zip and extract it on your pc
make sure your phone has usbdebugging enabled
connect your phone and grant your pc acces.
press the install file in the twrp folder and let it do it's thing.
copy zip 1 and zip2 to your sd card
boot into twrp (power device off and power it on while holding volume up and down pressed at the same time)
ignore the first message from twrp
choose install and go to your external sd card.
select zip1 and flash
reboot your phone.
after reboot power down your phone and boot into twrp again.
install zip 2
after that reboot and you're rooted
you can change the supersu app to your internal memory by getting a rootbrowser (es explorer)
go to /data/app
locate the eu.chainfire.supersu.1 folder
and place that into /system/app folder
give it the following permissions rwx r-x r-x (hold the folder until its selected then go to properties there you can change your permissions).
Lordbannakaffalatta said:
which version are you on? i would recommend going to marshmallow first (b564)
if your stuck at b194 download b560 from here
and unzip it put it in your sd card in a folder named dload and do a local update.
after that you upgrade to the latest version (b564)
than you take the twrp zip and extract it on your pc
make sure your phone has usbdebugging enabled
connect your phone and grant your pc acces.
press the install file in the twrp folder and let it do it's thing.
copy zip 1 and zip2 to your sd card
boot into twrp (power device off and power it on while holding volume up and down pressed at the same time)
ignore the first message from twrp
choose install and go to your external sd card.
select zip1 and flash
reboot your phone.
after reboot power down your phone and boot into twrp again.
install zip 2
after that reboot and you're rooted
you can change the supersu app to your internal memory by getting a rootbrowser (es explorer)
go to /data/app
locate the eu.chainfire.supersu.1 folder
and place that into /system/app folder
give it the following permissions rwx r-x r-x (hold the folder until its selected then go to properties there you can change your permissions).
Click to expand...
Click to collapse
I'm on B170 now. should I go for B560?
Trying to use Kingroot as suggested by Korelev in his post explaining how to unlock bootloader. The phone is on debugging mode and MTP mode, but Kingroot is not detecting it (the debugging mode enabled, not the phone). I'm using Lollipop 5.0.1, the build is the one in the post [TWRP flashable] Poland v20b stock rom - Marshmallow (v10i).
Any info will be greatly appreciated.
Are you using kingroot on your pc? Thete's no need since you can just use the app. It doesn't require a computer
SupermanPrime said:
Trying to use Kingroot as suggested by Korelev in his post explaining how to unlock bootloader. The phone is on debugging mode and MTP mode, but Kingroot is not detecting it (the debugging mode enabled, not the phone). I'm using Lollipop 5.0.1, the build is the one in the post [TWRP flashable] Poland v20b stock rom - Marshmallow (v10i).
Any info will be greatly appreciated.
Click to expand...
Click to collapse
Just flash the su zip if you have twrp installed.
Korelev said:
Are you using kingroot on your pc? Thete's no need since you can just use the app. It doesn't require a computer
Click to expand...
Click to collapse
Yes I am. Which one is the legit app? There are like 15 apps in the store called "Kingroot" and all of them are trash to sell ads.
Oh my, as I was typing that, I remembered there is a link in the official site to download the apk. I tell you, this happens way too often... Thanks!
mayankjet said:
Just flash the su zip if you have twrp installed.
Click to expand...
Click to collapse
Don't have TWRP installed. I'm trying to root to install it
Something new is happening. LG Flash tool says "Contact administrator"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone know what this means?
SupermanPrime said:
Something new is happening. LG Flash tool says "Contact administrator"
Anyone know what this means?
Click to expand...
Click to collapse
Try installing it again also did you boot your phone in download mode ?
mayankjet said:
Try installing it again also did you boot your phone in download mode ?
Click to expand...
Click to collapse
Yes. I had done this at least 7 times before this one.
1. Download mode
2. Open LG flash tools
3. Select KDZ (v10i)
4. Pressed CSE Flash
5. Pressed START
6. Pressed Clear registry
7. Chose "Different Country"
8. Chose English
9. Pressed OK
10. A couple of processes later, the message appears
SupermanPrime said:
Yes. I had done this at least 7 times before this one.
1. Download mode
2. Open LG flash tools
3. Select KDZ (v10i)
4. Pressed CSE Flash
5. Pressed START
6. Pressed Clear registry
7. Chose "Different Country"
8. Chose English
9. Pressed OK
10. A couple of processes later, the message appears
Click to expand...
Click to collapse
When Flash Tool asks you for country/language, don't change the default values (Korea/Korean). It won't make your phone Korean, don't worry. Just leave as it is. Also flash v10f, unless you're from Argentina. Then you need to flash something else as far as I'm aware.
Fobos531 said:
When Flash Tool asks you for country/language, don't change the default values (Korea/Korean). It won't make your phone Korean, don't worry. Just leave as it is. Also flash v10f, unless you're from Argentina. Then you need to flash something else as far as I'm aware.
Click to expand...
Click to collapse
Yes I'm from Argentina, I flashed the v10i like another member stated in his post. What confuses me is that I've done this a couple of times. I would try again without changing values but I already installed MM, TWRP and rooted. So maybe another time. Thanks!
SupermanPrime said:
Yes I'm from Argentina, I flashed the v10i like another member stated in his post. What confuses me is that I've done this a couple of times. I would try again without changing values but I already installed MM, TWRP and rooted. So maybe another time. Thanks!
Click to expand...
Click to collapse
How did you root mm? I have flashed the v20e and I want to have twrp and root I'm form argentina
ToxicBionic said:
How did you root mm? I have flashed the v20e and I want to have twrp and root I'm form argentina
Click to expand...
Click to collapse
@Korelev, does the procedure differ for Argentinian models?
No, it doesn't
ToxicBionic said:
How did you root mm? I have flashed the v20e and I want to have twrp and root I'm form argentina
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg...40n-thread-t3108435/post71201493#post71201493
Do steps 1,2,3,4,5,7. Don't do "adb reboot recovery" in the end. Then get TWRP by following this guide. Then use this to get you running Marshmallow. Boot up into Marshmallow. Then "adb reboot recovery" to reboot to recovery and flash the latest SuperSU zip. You could also try Magisk.
Fobos531 said:
https://forum.xda-developers.com/lg...40n-thread-t3108435/post71201493#post71201493
Do steps 1,2,3,4,5,7. Don't do "adb reboot recovery" in the end. Then get TWRP by following this guide. Then use this to get you running Marshmallow. Boot up into Marshmallow. Then "adb reboot recovery" to reboot to recovery and flash the latest SuperSU zip. You could also try Magisk.
Click to expand...
Click to collapse
I have tried to flash v10i in te v20e but when i finished to flash it when its on you get system ui has stopped if you put okay it says "call has stopped" and then it says "system ui has stopped" again I tried to flash with the cse flash then when that happened to me I flash it by the normal method and I still have this problem what should I do? I'm from Argentina
ToxicBionic said:
I have tried to flash v10i in te v20e but when i finished to flash it when its on you get system ui has stopped if you put okay it says "call has stopped" and then it says "system ui has stopped" again I tried to flash with the cse flash then when that happened to me I flash it by the normal method and I still have this problem what should I do? I'm from Argentina
Click to expand...
Click to collapse
Try to factory reset it. It should solve the issue.
mayankjet said:
Try to factory reset it. It should solve the issue.
Click to expand...
Click to collapse
How can I factory reset If I can't use the phone?
ToxicBionic said:
How can I factory reset If I can't use the phone?
Click to expand...
Click to collapse
Try to boot into twrp then do a factory reset from there.
mayankjet said:
Try to factory reset it. It should solve the issue.
Click to expand...
Click to collapse
mayankjet said:
Try to boot into twrp then do a factory reset from there.
Click to expand...
Click to collapse
I don't have twrp neither root, how can I do it?
ToxicBionic said:
I don't have twrp neither root, how can I do it?
Click to expand...
Click to collapse
To do factory reset on your device turn it off ,and then press and hold the power button and volume down button together at the same time. When you see the lg logo release the power button for a moment while keeping the volume down button then press the power button again. It should boot into factory reset menu.
Please hit the thanks button, if it worked.
ToxicBionic said:
How did you root mm? I have flashed the v20e and I want to have twrp and root I'm form argentina
Click to expand...
Click to collapse
Sorry for the late response. I used Kingroot's apk.
Bootloader is open but TWRP is giving ERROR1 when trying to flash Root, and also is unable to mount any partition...
Any help from someone who managed?
***Important Update!*** I am almost sure the problem is with Huawei shipping the P10/P10Plus with different storage chips.
Myself unfortunately got the eMMC chip + LPDDR4 memory. This is why TWRP is unable to mount any partition since the .fstab is different.
I have a working TWRP I ported myself which I was able to rebrand with, root yet to be confirmed. If you need it PM me.
I strongly advise anyone trying to flash TWRP to check their storage chip first using adb command "ls /proc/fs/*".
If you get mmcblk your F******, SD or UFS you are good.
I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.
Thanks!
Goronok said:
I have an AL00 (rebranded to L29) that I rooted without too much hassle. The key is NOT sliding the first screen in TWRP. You have to click the read only button and then flash the phh nocrypt root zip.
Click to expand...
Click to collapse
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!
MosquitoByte said:
I would kindly appreciate links used and a short walkthrough...sent you a PM.
Thank you so much!
Click to expand...
Click to collapse
https://www.gizdev.com/root-huawei-p10-p10-plus-install-twrp/
If you follow this guide exactly, you'll be rooted without issues. (you can use their files, they work fine) Two things to watch for :
1. You absolutely cannot slide the first slider in TWRP to allow modifications. You have to click the read only button.
2. It will only work on a fresh install / fresh boot.img. If you've already allowed modifications within TWRP, you're stuck. You have to flash a new boot.img or completely re-install EMUI via update.zip or funkyhuawei.
Hope this helps
Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis
DV87XDA said:
Thanks so much for your Info Goronok.
I got the same problem.. No possibility of a full root and system partition is write protected..
One question:
Is ist possible to do a factory reset out of the settings as well?
Or do we have to go for the funkyhuawei method?
How can i update.zip the system if its not possible to make a dload folder in the root folder on system partition?
Can someone uplad the boot.img for VKY-L09C432B130, if that will save the problem too... ?
Ok that wasnt one, that were 4 questions.. but thanks so much in advance
Kind Regards
Dennis
Click to expand...
Click to collapse
1. No factory reset within the device will help you once you've swiped to allow modifications within TWRP.
2. I did funkyhuawei, so it's the only thing I can speak to. This method will absolutely work assuming you dont mind spending a few dollars and have a router where you can specify DNS.
3. update.zip should (in theory) work from sdcard, though I have not personally tried it. I think most of the people mentioning this method are coming from a P9/Mate9, which does things a little differently.
4. I have not seen a link for VKY-B130 yet, but here is one for B124. The boot.img here should work just the same... http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v82453/f2/full/update.zip
can't figure out what is wrong
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://imgur.com/a/nzog4
Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis
Been there..
DV87XDA said:
Hey Mosquito, i guess we both have the same kinda Problem.
I will do the following steps today and let you guys know, if and how it worked out.
The only problem is, im not at home right now, so i dont have access to a router where i can change the DNS. So no FunkyHuawei method for me.
I will do the following steps today:
1. Donwloading the VKY-L09C432B130 jus now. Trying to flash the original boot.img and do the TWRP and root again, WITHOUT swping the TWRP allow modifications slider
2. If No 1 doesnt work i will copy the download update.app, will create a dload folder on my external sd card and copy update.app in it. Then trzing to freshly install the downloaded firmware.
3. If there is somehow a failure or any error with the automated update i will factory reset the phone via settings and then see whtats going on.
I hope everything will work out fine, even without the possibility of FunkyHuawei Reset.
Keep in mind that there are two types of TWRP online available for the P10Plus Version 3.0.2.2 and version 3.1.0.0.. maybe the root works different with the different TWRPs. At this moment im not quite sure which one i use.. probably the one from gizdev, what Goronok told us to use.
I keep you up to date whats going on!
Thanks guys
Regards
Dennis
Click to expand...
Click to collapse
I already did everything you wrote, still no go.
Please update me if you get a different result.
Tried both TWRP versions.
What firmware you had at first?
I have bought my phone 10 days ago.
From T-Mobile Germany.
VKY-L09 6GB Version, Single Sim i guess.
Not sure what Firmware i had when i bought it, cause I immediately tried to root after buying, without checking the FW Version.
But I did a FunkyHuawei Restore before with VKY-L09C432B130 Firmware and it worked.
Only the Full Root is the Problem right now.. damnit.
I Will try everything and let you know.
Later!
MosquitoByte said:
First time I tried to root I did slide the "allow modifications"...
I reinstalled stock twice with FunkyHuawei but still can't get TWRP to work.
It seems it doesn't have access to any partition.
Phone boots normally though...
Any ideas?
Please.....
http://imgur.com/a/nzog4
Click to expand...
Click to collapse
What root zip are you trying to flash?
That from gizdev. Superroot.noverity.nocrypt.zip
Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..
Ohhh Great
DV87XDA said:
Hey Guys i made it ! Yesss Thats awesome !
Im doing a Factory Reset now for a clean install of everything. Just because i want a fresh and new phone
Mosquito what Firmware are you on?
Let me know your Firmware Number and i explain what to do..
Click to expand...
Click to collapse
I am now reverting to VKY-AL00C00B123 using FunkyHuawei...Please share what to do next
Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis
DV87XDA said:
Ok forget my last post.. sorry!
Here is what to do:
Whoever gets the Error 1 Message when installing the SuperRoot_noverity_nocrypt zip, do the follwoing:
Get your Firmware Number, download the whole Firmware (about 2GB +/-) and download the huaweiextractor from here
https://forum.xda-developers.com/showthread.php?t=2433454
Start the Huaweiextractor exe and unpack the boot.img.
Start your phone into bootloader
Flash boot.img (of your original firmware, the one u unpacked just now) to your phone via fastboot flash boot bot.img
Then start your TWRP Recovery
Clear Cache/Dalvik
then install the SuperRoot_noverity_nocrypt, this time you wont get a error
then wipe cache/Dalvik
reboot
enjoy our FUll root on Your P10plus or P10
Best regards
Dennis
Click to expand...
Click to collapse
I think I tried that already,
I will try again..
Where did you get your firmware from and what firmware you were on?
I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!
DV87XDA said:
I have the Firmware L09C432B130 and i downloaded from here:
http://www.stechguide.com/download-huawei-p10-plus-nougat-firmware-update/
Just google your firmware and downloaded.
You need the exact 100% same boot.img from your installed firmware.
Then it will work for sure!
Click to expand...
Click to collapse
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.
MosquitoByte said:
Dennis,
Can you please check for me if TWRP mounts partitions correctly for you?
I suspect the problem for me is incompatibility of the available TWRP with the Chinese version, or some sort of data encryption embedded.
Click to expand...
Click to collapse
Is your device an AL00?
Goronok said:
Is your device an AL00?
Click to expand...
Click to collapse
Yes indeed.
Hi Guys, it's been a while since I've been trying to fix this HW Mate 8, but without success.
At the moment TWRP tells me it is without software, could you kindly help me?
I would like to install the nxt-l29c432b version ... I tried to get it from AL10 to L29 and this is the result ...
I tried a bit 'of xda-forum and the guides I found were not helpful, because many links with the firmware have expired and Hw Firmware finder are not exactly those of the guide.
I await your feedback,
manuele16 said:
Hi Guys, it's been a while since I've been trying to fix this HW Mate 8, but without success.
At the moment TWRP tells me it is without software, could you kindly help me?
I would like to install the nxt-l29c432b version ... I tried to get it from AL10 to L29 and this is the result ...
I tried a bit 'of xda-forum and the guides I found were not helpful, because many links with the firmware have expired and Hw Firmware finder are not exactly those of the guide.
I await your feedback,
Click to expand...
Click to collapse
This should be easy, if you are not planning on changing region.
Basically you need to find the twrp version for the EMUI version that you are going to run eventually.
And then just flash the files from FF according to the guides.
Sent from my HUAWEI NXT-L29 using Tapatalk
Leo_83 said:
This should be easy, if you are not planning on changing region.
Basically you need to find the twrp version for the EMUI version that you are going to run eventually.
And then just flash the files from FF according to the guides.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I would also like to change that if you can ... TWRP I installed it and it works, but when I try to flash a rom, it fails, if I try to update it with vol + and vol - it gets to 5% and crashes.
manuele16 said:
I would also like to change that if you can ... TWRP I installed it and it works, but when I try to flash a rom, it fails, if I try to update it with vol + and vol - it gets to 5% and crashes.
Click to expand...
Click to collapse
If you are trying to flash a rom different than the region that your phone is configured for it will fail.
I believe, at least I know it was so before because I done on marshmallow, that you need to change the region configuration before flashing the different region rom.
Sent from my HUAWEI NXT-L29 using Tapatalk
Leo_83 said:
If you are trying to flash a rom different than the region that your phone is configured for it will fail.
I believe, at least I know it was so before because I done on marshmallow, that you need to change the region configuration before flashing the different region rom.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Hi guys, do you have a TWRP backup of L29c432 that you can restore?
I am having the same issue. Tried to debrand L29 to AL10. Somewhere in between bricked the phone and now I get no os installed in twrp. Tried flashing the update.app , fails at 5%. Twrp says can't mount system,cust,data. Tried flashing the update.zip from twrp. That also failed. System partition is showing as only 2 mb.
EDITkay, I can mount system now, but not data and cust. I tried converting their file system to fat and back to exfat4 but that's also not possible.
Any solutions?
can you boot to fastboot mode? if you can use this command to know exactly what you have. then debrand to the original firmware. flash the original recovery then force restore via erecovery (vol+ vol- power) use same firmware update.app
AL10 can update up to oreo.
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem get-build-number
Finally found a twrp by which I was able to format data . But now it says can't mount system although it can read it. I tried the commans you posted and it says that I have the AL10C00B320 version. But in twrp it says no os installed and everytime I reboot it boots to Huawei erecovery.
This is the twrp which worked for me, incase anyone needs it.
https://androidfilehost.com/?fid=457095661767140812
can't find a AL10C00B320 firmware finder . i found this NXT-L29C432B320
extract :
system.img
boot.img
cust.img
recovery.img
and try to flash this twice via fastboot
reboot to erecovery the factory reset. then force restore using the update.app for NXT-L29C432B320. the factory reset then reboot.
I do have a AL10B320 rom . Flashed it with twrp, says cant mount system . Falshed it via dload. Fails at 5% and says incompatible system. Flashed the img files via fastboot. Everything geta flashed but the phone gets stuck at bootloop. Also flashed the hw update file for AL10B320, same thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the result of the fastboot commands. I think I have the product model in my phone as next instead of Huawei NXT-AL10 or NXT-L29. If somehow I edit the model version in update.app or the update.zip to be NEXT , then maybe it can install with dload. Anyway to edit the files?
I tried flashing oeminfo.zip fo the l29 version in twrp but it fails. How do I flash oeminfo through fastboot?
did you factory reset after flashing?
extract everthing in the update.app and flash it one by one. verlist.img in the update.app is the one holds the version you can open it via note pad or notepad++ to see whats version. if u succeed in flashing the verlist.img the erecovery might work.
You mean to say flash everything like modem,and all the 20 something img files?
I think maybe there's something wrong with the system partition. I tried flashing kangvip b368 but it says can't mount system partition. I am trying everything to boot to a OS. Also is it possible I change the model of my phone from twrp by replacing files via twrp file manager.
Astra1 said:
You mean to say flash everything like modem,and all the 20 something img files?
I think maybe there's something wrong with the system partition. I tried flashing kangvip b368 but it says can't mount system partition. I am trying everything to boot to a OS. Also is it possible I change the model of my phone from twrp by replacing files via twrp file manager.
Click to expand...
Click to collapse
why don't you try dload method..i'm just revived my Mate 8 today after 3 and half days try to find solution after debranding from L29 to AL10..haha..is it on EMUI 4.0 or EMUI 4.1? this is the instructions to solve the problem:-
1. you need to flash stock recovery. Just use SRK Tool by @somboons. Please choose the stock recovery based on your EMUI
2. Try to flash AL10C00B386 https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338 (download firmware the last link on the thread) by using dload method.
3. If success, use SRK Tools to change oeminfo and custom.bin (need to be unlocked bootloader and root)
4. You can follow the rest of instruction from this thread https://forum.xda-developers.com/mate-8/general/guide-how-to-install-nougat-al10c00b523-t3500327
I hope this will help you bro..
Okay, I managed to fix it. AL10C00B320 was not working, so I thought why not flash an older version. So I dloaded the AL10C00B192 firmware . It reached till 48% then failed. So I thought there's some hope. Flashed the firmware via twrp. Had the same errors but result was successful. Rebooted and the phone is working fine now. It's updating to nougat now . Everything is working fine now except hat sim1 is not working. There was a fix to this.
After I flashed L29C185 CUST sim1 started working but the model changed to NEXT and stopped updating. So after flashing cust should I again change oem and rebrand?
Astra1 said:
Okay, I managed to fix it. AL10C00B320 was not working, so I thought why not flash an older version. So I dloaded the AL10C00B192 firmware . It reached till 48% then failed. So I thought there's some hope. Flashed the firmware via twrp. Had the same errors but result was successful. Rebooted and the phone is working fine now. It's updating to nougat now . Everything is working fine now except hat sim1 is not working. There was a fix to this.
After I flashed L29C185 CUST sim1 started working but the model changed to NEXT and stopped updating. So after flashing cust should I again change oem and rebrand?
Click to expand...
Click to collapse
Sorry for late reply..your Mate 8 still can't update?For AL10 it's common problem if you debrand from L29. Try to flash another stock firmware from FF that have FullOTA-MF. That is might be working for you..Just try it first..
ceriqdesign said:
Sorry for late reply..your Mate 8 still can't update?For AL10 it's common problem if you debrand from L29. Try to flash another stock firmware from FF that have FullOTA-MF. That is might be working for you..Just try it first..
Click to expand...
Click to collapse
It's okay now. I have updated to the latest oreo version for nxt-al10.
Astra1 said:
It's okay now. I have updated to the latest oreo version for nxt-al10.
Click to expand...
Click to collapse
Glad to hear it..when i changed to AL10 or DL00 there are a few settings that are not in global firmware..i think it's only for devices in China
Hi guys, forgive my incapacity.
After all this time my Mate8 is still unusable.
I tried to follow the steps I found here, but trying to load via dload the AL10C00B386 arrived at 35% then it stopped.
I would like to get the NXT-L29C432B581 or later ROM.
The basic phone is a Chinese al10.
I know to ask you a lot, nobody could make me a step by step guide or upload a backup from TWRP ???
thank you all
manuele16 said:
Hi guys, forgive my incapacity.
After all this time my Mate8 is still unusable.
I tried to follow the steps I found here, but trying to load via dload the AL10C00B386 arrived at 35% then it stopped.
I would like to get the NXT-L29C432B581 or later ROM.
The basic phone is a Chinese al10.
I know to ask you a lot, nobody could make me a step by step guide or upload a backup from TWRP ???
thank you all
Click to expand...
Click to collapse
Hi Friend, You can get your firmware in Firmware Finder app available on Google Play store.
Dload you did with files on SD card and not internal storage, I hope. If not, put it in SD card and try.
Sorry, I read your previous messages now. Let me know your Original build i.e., AL, DL, or L29. Which last working rom you were on and what you did after that.
apat26 said:
Hi Friend, You can get your firmware in Firmware Finder app available on Google Play store.
Dload you did with files on SD card and not internal storage, I hope. If not, put it in SD card and try.
Sorry, I read your previous messages now. Let me know your Original build i.e., AL, DL, or L29. Which last working rom you were on and what you did after that.
Click to expand...
Click to collapse
Hello on the packaging there is written NXT-AL10.
Bought from China, the supplier has put a European ROM (I do not remember which one it was). At the moment the NRD90M test-keys is installed on the phone, emui 5 android 7.