i recently got a verizon s5 G900v factory unlocked from ebay that was a store display model and has been upgraded to 6.0.1. I have an at&t sim card in it and only gives me the 3g or sometimes an "h" next to my signal bars.I can not send or recieve picture msgs even when connected to wifi. If I disconnect from wifi I can't use any data, connect to internet, playstore, ect. I have a Verizon factory unlocked s3 mini and my simm works perfect with data usage so that seems no prove something is wrong with the phone. What are my options on fixing this problem or installing custom rom? I have searched the threads and can not find any posts with my data issue.
wrong hardware for at&t
galaxys4bricked said:
i recently got a verizon s5 G900v factory unlocked from ebay that was a store display model and has been upgraded to 6.0.1. I have an at&t sim card in it and only gives me the 3g or sometimes an "h" next to my signal bars.I can not send or recieve picture msgs even when connected to wifi. If I disconnect from wifi I can't use any data, connect to internet, playstore, ect. I have a Verizon factory unlocked s3 mini and my simm works perfect with data usage so that seems no prove something is wrong with the phone. What are my options on fixing this problem or installing custom rom? I have searched the threads and can not find any posts with my data issue.
Click to expand...
Click to collapse
was told at the at&t store that even though this phone is verizon factory unlocked the hardware is not compatible with their network....I now have it rooted and bootloader unlocked with 6.0.1 and will be trying differnt roms to rule out a software issue but looks like i may have to switch to verizon to keep this phone
galaxys4bricked said:
was told at the at&t store that even though this phone is verizon factory unlocked the hardware is not compatible with their network....I now have it rooted and bootloader unlocked with 6.0.1 and will be trying differnt roms to rule out a software issue but looks like i may have to switch to Verizon to keep this phone
Click to expand...
Click to collapse
The following link is a comparison between the G900V and the G900A:
http://www.phonemore.com/compare/ph...m-g900v-vs-samsung-galaxy-s5-sm-g900a/4557097
You'll see that the G900V uses the CDMA band and the G900A uses the GSM band.
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Related
Hi All, I have an unlocked Samsung Galaxy S4 I9505. The mobile provider here in ireland,will be releasing 4g. When I check the network settings, I do not see any reference to lte as an option. Looking on the internet, it seems I may have a hong kong version and they used a rom that did not have lte in it.
My queries are:
1. Will the lte option work on this phone, even though there is no option in the network settings menu?
2. Is there a way of getting this lte to show up in the network section?
3. I have seen a few answers referring to the service menu and here you can supposedly add in the missing lte. I did try and follow it,but nothing happened.
I am not very phone technical. Any replies would be greatly appreciated.
Mark
Post more info about the phone.
theunderling said:
Post more info about the phone.
Click to expand...
Click to collapse
I am not sure what other information you are looking for. It is a Samsung Galaxy S4, I9505 with 16gb. It is 3g/4g capable. When I go into network settings, I do not see the lte option. I have looked on the web, and it seems that this is an issue with these phones sourced from Hong Kong.
i have no options for it either, and i have 4G
That is the problem with xda.People give 10% of the info, and someone like me is expected to guess the rest.
You should be putting down exact phone model, firmware, sim provider, country, phones csc/country of origin.
All I know about hong kong is that is where you get all that cheapo copyright infringement crap stuff.
You could possibly flash a stock rom for your country/carrier, or see if theres a secret menu to get it.
As you suspect, there should be the 4g/3g/2g option like I have on my uk 19505.
help
I am in dublin,ireland and three, Mobile company, has lauched 4g. I bought my i9505 last june. I cannot access 4g. When I go to look at network settings, 4g lte is not listed. When I ordered the phone sim free, it must have been sourced from hong kong. This is a known issue on the web
The phone is running android 4.3, with a bsseband of i9505zhuemk2.
If i flash my phone with kit kat, as i have seen on this forum, will it give me the option for 4g? I have factory restored the phone but with no luck. If i follow the instructions to flash my phone, using o
din, is it usually straightforward ? i am a bit of a newbie with smart phones, so any help is appreciated. Mark
If it was me Id flash BTU 4.3.See user "repulsa" posts as he put up a mega link to download that file quick, opposed to it taking 8 hours from sammobile.
Read a tutorial about using odin first.
I suppose you could even use the 4.3 three rom if you want....
SAmsung Galaxy S4 I9505 still missing LTE Option
Hi,
I have flashed the 4.3 android btu onto the phone, as suggested and it has gotten rid of some of the apps. It was working fine until it would suddenly reboot. I have just factory reset the phone to see if this solves the problem. But the lte 4g option is still not showing in the network setting section. The area I am in cannot access three's 4g signal yet. Does the 4g option in network settings, only show up when you get a 4g signal? or should it be there regardless.
Will upgrading to kitkat fix this issue? I believe samsung will be releasing this version in the next few weeks. If it does, do you think that when I update the os, will make this 4g/lte option appear?
Also is there a link that I could flash to get kitkat that won't invalidate the warranty? TIA MArk
[email protected] said:
Hi,
I have flashed the 4.3 android btu onto the phone, as suggested and it has gotten rid of some of the apps. It was working fine until it would suddenly reboot. I have just factory reset the phone to see if this solves the problem. But the lte 4g option is still not showing in the network setting section. The area I am in cannot access three's 4g signal yet. Does the 4g option in network settings, only show up when you get a 4g signal? or should it be there regardless.
Will upgrading to kitkat fix this issue? I believe samsung will be releasing this version in the next few weeks. If it does, do you think that when I update the os, will make this 4g/lte option appear?
Click to expand...
Click to collapse
I also don't get the 4G LTE option on 3 UK but the option appears when I put an EE SIM card in. I think it's because 3 hasn't yet activated 4G on your SIM. They should activate it within the next month or so.
Edit: I have just checked the 3 website and it says a software update is required for 4G to work so upgrading to KitKat might fix it.
[email protected] said:
Also is there a link that I could flash to get kitkat that won't invalidate the warranty? TIA MArk
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showthread.php?t=2601067 for KitKat.
Thanks
Thanks for your help. I followed your directions and upgraded to kitkat. I now have the lte option under network settings. All the help was appreciated!! Mark
vpwrf said:
I also don't get the 4G LTE option on 3 UK but the option appears when I put an EE SIM card in. I think it's because 3 hasn't yet activated 4G on your SIM. They should activate it within the next month or so.
Edit: I have just checked the 3 website and it says a software update is required for 4G to work so upgrading to KitKat might fix it.
See http://forum.xda-developers.com/showthread.php?t=2601067 for KitKat.
Click to expand...
Click to collapse
Hi All,
I moved Carrier from Verizon to T-mobile, and found one good feature of T-mobile S5 is not working in Verizon version.
Wifi calling, I'm using Galaxy S5 Verizon, all others are good, except Wifi calling.
Sim error was already handled by rooting and deactivating service.
Is there any way to activate wifi calling feature in Verizon Galaxy S5 version, I searched, but by locked Bootloader, I can't install T-mobile firmware in Verizon version, and also I can't do Safestrap with OG5(with root) rom either.
My Verizon S5 phone is very good in most of area with T-mobile, except my office, by poor T-mobile signal (I guess, there is Verizon router in my office area, and locking my signal, for when I out of office, full t-mobile signal is detected, but when I enter to my office, all dead. , no problem when I used Verizon Carrier )
So I need wifi calling feature at my office, but I can't use it with Verizon version.
If you guys can provide any other recommandation. it will be very helpful to me.
Thank you!!!!!!!
I found the answer from the other thread.
http://forum.xda-developers.com/showpost.php?p=61489873&postcount=17
Downgrade to NCG build (Kitkat) by odin again and then rooted.
And then followed guide in the link (I used Flashfire).
Only one thing in Twi5ted Lollipop 5.0 V7, Select "No thanks" to sharing data with Samsung in EULA Screen or will meet sim problem.
http://forum.xda-developers.com/showpost.php?p=59048435&postcount=71
In that case to resolve the issue, need to factory reset and then restart initial setup again.
(I did )
Currently my one looks good
Wifi Calling, Bluetooth, GPS and all of other functions working good.
nm
I really wish wifi calling wasn't so locked down on Big Red (VZW). Hangouts dialer is a good alternative as long as the wifi is stable enough.
I purchased a used g900t online in good condition to replace my broken g900a and just received it. Slipped my AT&T sim into it and booted, it didn't ask me to enter any code, and under network settings it seems to have auto set the AT&T apn settings. I can make calls and send text but there is no internet connection, and my plan allows 4g internet. There is also no 4G symbol next to my signal strength(there was once, but after restarting it, it never came back).
Can anyone shed some light?
The only suggestion I might suggest is checking that your baseband is the newest baseband. Sometimes there are updates in baseband that cause the phone to be able to communicate with the carrier.
Teir said:
I purchased a used g900t online in good condition to replace my broken g900a..........
Click to expand...
Click to collapse
In addition to what @genhen had stated, this depends on one or both of the following 2 factors...
1) You may not have the latest G900T baseband Firmware version. The latest one for the G900T is the "QC2".
If you need the baseband Firmware Modem Update, you can obtain it on the following link...
https://www.androidfilehost.com/?fid=11410963190603895052
... Just place it in the AP spot within Odin and it will install fairly quickly.
2) When your using a SIM for one carrier to be used on a device for a different carrier, you may need a "BYOP" (Bring Your Own Phone) SIM.
You probably should contact AT&T to see/clarify what SIM you can use/need.
For example... SIM cards meant for an AT&T device may not be friendly on another carriers device. You may need an AT&T SIM that's meant to be used on a T-Mobile device.
I hope that I had explained this okay via text...
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.
Hi guys,
I bought the unlocked firmware phone back in December 2016. The phone is great, the problem is I am using EcoMobile MVNO. It's refusing to recognize the network with the MVNO's sim card. I've spent hours on the phone with them and they claim all is OK on their (and Verizon's) end.
The phone sort of works, so I've just been grinning and bearing it so far. Using 4G switcher, I can put it in CDMA only mode, in which case it connects to '123456' and I can receive and make calls, and receive texts, but have no internet. If I put it in full LTE/GSM/CDMA auto mode, it connects to LTE, so I have internet, but it claims I'm not connected to Verizon network and in fact it's not available. So in this mode I can't receive calls or texts. Can't send texts under any mode. I've done a full factory reset at the MVNO's behest, of course that did nothing. The phone seems to connect fine to Verizon's network if I borrow someone elses's Verizon sim. My MVNO sim also works in my wife's iPhone5 without a problem. So it really seems to come down to the firmware on the phone. I'm holding out against hope that when Nougat comes to the G935U firmware, this problem is magically solved... but just in case decided to post here.
Please help, any ideas would be appreciated.
-Frustrated G7E user
galaxy7user said:
Hi guys,
I bought the unlocked firmware phone back in December 2016. The phone is great, the problem is I am using EcoMobile MVNO. It's refusing to recognize the network with the MVNO's sim card. I've spent hours on the phone with them and they claim all is OK on their (and Verizon's) end.
The phone sort of works, so I've just been grinning and bearing it so far. Using 4G switcher, I can put it in CDMA only mode, in which case it connects to '123456' and I can receive and make calls, and receive texts, but have no internet. If I put it in full LTE/GSM/CDMA auto mode, it connects to LTE, so I have internet, but it claims I'm not connected to Verizon network and in fact it's not available. So in this mode I can't receive calls or texts. Can't send texts under any mode. I've done a full factory reset at the MVNO's behest, of course that did nothing. The phone seems to connect fine to Verizon's network if I borrow someone elses's Verizon sim. My MVNO sim also works in my wife's iPhone5 without a problem. So it really seems to come down to the firmware on the phone. I'm holding out against hope that when Nougat comes to the G935U firmware, this problem is magically solved... but just in case decided to post here.
Please help, any ideas would be appreciated.
-Frustrated G7E user
Click to expand...
Click to collapse
Flash the vzw firmware or go through the steps for the hybrid rom with vzw modems implemented.
Thanks. I was really hoping for something less intrusive, maybe some CSC edit fix, or some such.
galaxy7user said:
Thanks. I was really hoping for something less intrusive, maybe some CSC edit fix, or some such.
Click to expand...
Click to collapse
Welp, the 7.0 update is here, and it didn't fix my issue, in fact now I can't even get LTE data as I used to get. :crying:
So I had this issue when I first got the nougat update. When I got my S7 I put in my brothers sim card to made sure it worked on Verizon cause i was buying it from someome and anyway I activated my straight talk verizon SIM and everything was great until I got the update and my service was weird and I didn't know what to do and then it dawned on me, I put in an actual verizon SIM card, doesn't need to be active let it register and then put your SIM back in and everything was great! Hope this helps...
Switched to TotalWireless, phone works now. They first sent me a SIM which didn't work, then had to send a different, post-paid one.
I now suspect if ECO also sent me a postpaid based SIM it would start working. Things are always way too complicated when Verizon is involved.
S7 U with Verizon MVNO
skater95 said:
So I had this issue when I first got the nougat update. When I got my S7 I put in my brothers sim card to made sure it worked on Verizon cause i was buying it from someome and anyway I activated my straight talk verizon SIM and everything was great until I got the update and my service was weird and I didn't know what to do and then it dawned on me, I put in an actual verizon SIM card, doesn't need to be active let it register and then put your SIM back in and everything was great! Hope this helps...
Click to expand...
Click to collapse
I'm tempted to try this as I'm having the same problem with my 935U and Xfinity Mobile (Verizon MVNO) SIM, instead of connecting to the Verizon network, it connects to network 123456. I did load the 935V firmware, which worked fine, but I'd prefer to return to the U firmware if this would work. Is this still working for you, and if so, do you just need to put the regular verizon sim in once and from then on the MVNO sim will work, and continue to work including after a reboot?
ralrdz said:
I'm tempted to try this as I'm having the same problem with my 935U and Xfinity Mobile (Verizon MVNO) SIM, instead of connecting to the Verizon network, it connects to network 123456. I did load the 935V firmware, which worked fine, but I'd prefer to return to the U firmware if this would work. Is this still working for you, and if so, do you just need to put the regular verizon sim in once and from then on the MVNO sim will work, and continue to work including after a reboot?
Click to expand...
Click to collapse
I put in a Verizon SIM in it once and that was after the nougat update. But every time the phone restarts, I have to make a phone call for it to connect to the service or it will just stay stuck in "searching for service" but once the phone call connects, I hang up and everything works as it should.
skater95 said:
I put in a Verizon SIM in it once and that was after the nougat update. But every time the phone restarts, I have to make a phone call for it to connect to the service or it will just stay stuck in "searching for service" but once the phone call connects, I hang up and everything works as it should.
Click to expand...
Click to collapse
Thanks, strange problem. I'll probably just stick with the 935V firmware for now as that's working fine (just have the Verizon bloat and failing the hotspot check). I also have a dialog going with Samsung support to see if they're aware of the problem and have a fix.
Cellular data problem with french carrier on LG V35 AT&T unlocked flashed FI firmware
Hello everyone,
I bought a LGV35 AT&T unlocked on amazon 3 months ago because I was so tempted by it. During the first 3 months with the AT&T firmware everything was fine, but all the crap AT&T apps was bothering me. So, I searched on internet for ways to get rid of the bloats and found out that you could cross-flash to unlocked google fi firmware, so I did. Everything went fine with the flash. Unfortunately, after 3-4 days my phone lose cellular data function. I can make calls and sms but can't have 4G/3G/2G, no cellular data at all. I tried a lot of things but no results. The only thing that worked is re-flash the fimrware but then after 3-4 days I lose cellular data function again. Can someone advise me about that ? My carrier is a french one (SFR). Is it possible to go back to the AT&T firmware again ?
I have a LG G7 as backup, so no worry here.
Thank you in advance for your responses,
Jenfir
Couple of thoughts as a novice I always like to investigate the most simple possibilities?
And as a second idea from the simple side is with the AT&t software if you had this wi-fi connection made automatically perhaps it would be delivering you data through Wi-Fi as opposed to the cellular then once you switch the software it no longer had that automatic connection to all the AT&t hot spots
Hi, thanks for your replies. I have not reach the limit data yet.
I don't really understand the automatic wifi-connection setting. Now that I don't have the AT&T software anymore I don't think it affects the connectivity on my phone. I have doubt about the google connectivity services though. I have my phone running again over cellular data after factory reset and I did not install the app. I will see if it solves my problem. I will keep this thread updated. I still take other advices.