I've been searching and can't find a definitive way of flashing TMobile firmware to the unlocked s8.
davwman said:
I've been searching and can't find a definitive way of flashing TMobile firmware to the unlocked s8.
Click to expand...
Click to collapse
I assume you have US Unlocked S8....
Normally you don't need to flash it with T-Mobile firmware because most of features are supported such as: VoLTE, Band 12 and WiFi Calling. If you do decide to flash here is the tread: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Yes US unlocked. The TMobile radios are better and utilize the new tech that TMobile uses. I'm assuming I can use just the radios, but there aren't any definite answers.
I am trying to get figure out the same answer.
I also have the G950U1 and would like to flash the T-Mobile firmware to obtain the 256qam and 4x4 radio.
I'm still searching for an answer.
There is also T-Mobile firmware that doesn't have bloatware, but I don't know if it is missing any feature that you guys are looking for. I do have an unlocked S8, but haven't flashed it yet.
I've attempted using both Odin, and the modified PriceComsy Odin to flash the T-Mobile G950u firmware onto the Unlocked G950U1, and it results in FAIL! (DeviceInfo).
Ended up just flashing the modem. Just need to see how this thing works now
In case anyone wanted to know how the T-Mobile modems work on the unlocked variant, I'd say quite well with all TMobile features working
davwman said:
In case anyone wanted to know how the T-Mobile modems work on the unlocked variant, I'd say quite well with all TMobile features working
Click to expand...
Click to collapse
But what kind of speeds did you have before that?
I am going to go off the limb and suggest that flashing the 950u T-Mobile Firmware doesn't give us the 4x4 MiMo Radio and 256QAM. I've not seen a difference in call quality, data speed, or signal strength. Can anyone let the community know what the three TMB/TMB/XAA mean?
This should be a big decision differentiator when selecting between the S8 unlocked and S8 T-Mobile branded device on the T-Mobile network.
zone23 said:
But what kind of speeds did you have before that?
Click to expand...
Click to collapse
The fastest speed that is in the screen shot, half of that. Also I've noticed I don't get random lte to H drops anymore where I normally would in weak TMobile areas.
Related
Hey!
From what I've read online it looks like all S7 Edges are built identically which means that the bands must be controlled by software. Are there any firmwares, patches, or tricks that enable other bands? I have a Verizon S7 Edge on T-Mobile so I'm mainly looking to unlock band 12. I saw this post: http://forum.xda-developers.com/ver...e-flashing-sm-935u-firmware-verizon-t3415145/ but im not sure if that will unlock the bands or not. VoLTE and WiFi-Calling would be a plus.
Thanks.
So you mean like flashing the u firmware or something
ShadowyStorm said:
So you mean like flashing the u firmware or something
Click to expand...
Click to collapse
I believe that is what this post describes: http://forum.xda-developers.com/ver...e-flashing-sm-935u-firmware-verizon-t3415145/ but I dont know if that will actually unlock the bands or not. Have you tried it? Will it actually unlock the bands?
Thanks.
I haven't tried this but my s6 edge works for my gf on metro and it's a Verizon phone with of1 firmware. I don't see why the u firmware wouldn't work for you.
Flashed the U Firmware. It didnt unlock the bands. Any other suggestions?
nahtnam said:
Flashed the U Firmware. It didnt unlock the bands. Any other suggestions?
Click to expand...
Click to collapse
Maybe now that you're on the U firmware you could flash the T-Mobile firmware? Not sure if it would work or not, maybe you'd be willing to try. Make a backup just in case...
I do belive the band's are controlled by the baseband/radio file in the updates, of course most of my experience is with the ENG bootloader on HTC devices so I think for Samsung it's either modem or pda....more experienced members can correct me if I'm wrong, so feel free to jump in
FragmentedLogik said:
I do belive the band's are controlled by the baseband/radio file in the updates, of course most of my experience is with the ENG bootloader on HTC devices so I think for Samsung it's either modem or pda....more experienced members can correct me if I'm wrong, so feel free to jump in
Click to expand...
Click to collapse
Do you think flashing the T-Mobile firmware would help? I posted in the other thread asking if it would work but if flashing firmeware replaces everything (bootloader, os, kernel, etc) then it should work right?
Hello, xda_developers.
I just got mail S7 Unlocked in the mail that I ordered from eBay, I believe it was a sweet deal CAD $549.99 + tax. I am with Telus BTW. Let's get to the point.
The phone is with Sprint which has bloatware and APN is locked out. I want to flash a new firmware onto the phone without Tripping the Knox. I looked into the 930U Firmware but don't know which one to pick. I looked into the thread: "Bloat free firmware 930U....anyone tried it?" and saw the part about root, so I backed out.
After I looked into the Sprint SM-G930P firmware and saw few different "Regions": SPR, XAS, and VMU. I found"SPR" is Sprint, and "VMU" is Virgin Mobile USA. For "XAS" I am not too sure, but "XAS image has the APN section unlocked". ("Here" )
Afterwards, I found the forum "Found a code...interesting...." and used the code "##BRAND#" and removed the Sprint boot logo, and some bloatware but the APN was still locked out, and still had "Hands-Free Activation".
I need help picking the right Firmware for my phone, which will let me add APN, and remove the "Hands-Free Activation". I do not want or need to root the phone.
The phone is up to the latest update:
Software Version: SG930PVPS2APG1 ,
Hardware version: REV0.6 ,
Baseband version: G930PVPS2APG1 ,
Build number: MMB29M.G930PVPS2APG1 .
I did not want to flash firmware without knowing for sure it will not brick the phone, brand new phone in a long time, I don't want to break it or brick it on the first day.
Aswell, I am not sure if I can flash a Canadian firmware, SM-G930W8 or the Global Firmware, SM-G930F.
Thank you for reading, hope you can help me out.
anjesh12 said:
Hello, xda_developers.
I just got mail S7 Unlocked in the mail that I ordered from eBay, I believe it was a sweet deal CAD $549.99 + tax. I am with Telus BTW. Let's get to the point.
The phone is with Sprint which has bloatware and APN is locked out. I want to flash a new firmware onto the phone without Tripping the Knox. I looked into the 930U Firmware but don't know which one to pick. I looked into the thread: "Bloat free firmware 930U....anyone tried it?" and saw the part about root, so I backed out.
After I looked into the Sprint SM-G930P firmware and saw few different "Regions": SPR, XAS, and VMU. I found"SPR" is Sprint, and "VMU" is Virgin Mobile USA. For "XAS" I am not too sure, but "XAS image has the APN section unlocked". ("Here" )
Afterwards, I found the forum "Found a code...interesting...." and used the code "##BRAND#" and removed the Sprint boot logo, and some bloatware but the APN was still locked out, and still had "Hands-Free Activation".
I need help picking the right Firmware for my phone, which will let me add APN, and remove the "Hands-Free Activation". I do not want or need to root the phone.
The phone is up to the latest update:
Software Version: SG930PVPS2APG1 ,
Hardware version: REV0.6 ,
Baseband version: G930PVPS2APG1 ,
Build number: MMB29M.G930PVPS2APG1 .
I did not want to flash firmware without knowing for sure it will not brick the phone, brand new phone in a long time, I don't want to break it or brick it on the first day.
Aswell, I am not sure if I can flash a Canadian firmware, SM-G930W8 or the Global Firmware, SM-G930F.
Thank you for reading, hope you can help me out.
Click to expand...
Click to collapse
The 930U firmware will work perfectly fine without root. No bloatware and you can modify the APN's.
Euronymous88 said:
The 930U firmware will work perfectly fine without root. No bloatware and you can modify the APN's.
Click to expand...
Click to collapse
the 930U firmware is bloatware free, and I don't have to root the phone? Also does it have the "Hands-Free Activation" or the "Activate this device" in Settings?
It's bloatware free and it doesn't require root. And when I flashed...it simply activated my device and there's no activate device in settings.
Euronymous88 said:
It's bloatware free and it doesn't require root. And when I flashed...it simply activated my device and there's no activate device in settings.
Click to expand...
Click to collapse
alright, thank you very much.
Going to go flash it now
edit: Quick Update, went to flash the G930U files(firmware?) and it all went smoothly. Takes time to register onto network. any fix without root?
edit 2: Just did a factory reset from recovery, seems to have fixed the slow network register
edit 3: The phone seems to run warmer than the sprint firmware, no idea why
Never mind, I am, an idiot.
skater95 said:
You have a Sprint S7 and was able to flash a firmware without any bloat on it?! Can you give me the link of which yoi downloaded? And did yoi use odin to flash it?
Click to expand...
Click to collapse
Read the thread again @skater95 the link and instructions are in it
Congrats on the phone! That is a good deal considering the phone goes for 899 brand new, and I'd assume around 600-750. But with black listing these days I wouldn't trust Kijiji etc.
Your phone should work fine except for LTE. Its missing I believe 2-3 bands for LTE but on the plus side it's the bands that bell/Telus don't really use much like 2600. So if you ever see soneone else have LTE and not you that would be why but, then again the bands you don't have usually are for rural areas
Enjoy the phone
Sent from my Nexus 5 using Tapatalk
PoppNLPatrick said:
Read the thread again @skater95 the link and instructions are in it
Click to expand...
Click to collapse
frostyisgod said:
Congrats on the phone! That is a good deal considering the phone goes for 899 brand new, and I'd assume around 600-750. But with black listing these days I wouldn't trust Kijiji etc.
Your phone should work fine except for LTE. Its missing I believe 2-3 bands for LTE but on the plus side it's the bands that bell/Telus don't really use much like 2600. So if you ever see soneone else have LTE and not you that would be why but, then again the bands you don't have usually are for rural areas
Enjoy the phone
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thank you very much. It's a pretty nice deal, still going on I believe. I don't have to worry about the blacklist. Even without the 2600 band data works great, really don't mind not having a few LTE bands, for the price i got the phone for. With the 930U firmware, it works great.
frostyisgod said:
Congrats on the phone! That is a good deal considering the phone goes for 899 brand new, and I'd assume around 600-750. But with black listing these days I wouldn't trust Kijiji etc.
Your phone should work fine except for LTE. Its missing I believe 2-3 bands for LTE but on the plus side it's the bands that bell/Telus don't really use much like 2600. So if you ever see soneone else have LTE and not you that would be why but, then again the bands you don't have usually are for rural areas
Enjoy the phone
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
The U firmware has more/better LTE bands enabled than the Sprint (P) firmware. I strongly doubt it's missing any LTE bands used in Canada.
myphone12345 said:
The U firmware has more/better LTE bands enabled than the Sprint (P) firmware. I strongly doubt it's missing any LTE bands used in Canada.
Click to expand...
Click to collapse
I believe your correct with the U firmware It shouldn't be missing a band or 2 like it is on the Sprint firmware. But yes about the same price as you'd get it on Kijiji (since there's tax) but it's new and don't have to worry about the blacklist
myphone12345 said:
The U firmware has more/better LTE bands enabled than the Sprint (P) firmware. I strongly doubt it's missing any LTE bands used in Canada.
Click to expand...
Click to collapse
FWIW - here are the bands that are apparently supported in the 930U firmware. This is band priority list from the LTE section of the ##DATA# menu. Not sure which bands Canada uses, but it looks like the only major one missing might be band 17?
Cooljb said:
FWIW - here are the bands that are apparently supported in the 930U firmware. This is band priority list from the LTE section of the ##DATA# menu. Not sure which bands Canada uses, but it looks like the only major one missing might be band 17?
Click to expand...
Click to collapse
I think the Canadian networks may have started using MFBI on band 12 (like AT&T has). If so then B17 would no longer be necessary in Canada. The best place to verify this might be to post a question about it on the Bell and Rogers forums on Howardforums.
In G930UUEU2APEH thread it is said:
"root with the only g930a method there is right now"
So, this universal firmware can be rooted, right?
Can any one give me the link for downloading the 930U rom for my sprint sm-g930p and are they facing any problem with the same
jainmayur83 said:
Can any one give me the link for downloading the 930U rom for my sprint sm-g930p and are they facing any problem with the same
Click to expand...
Click to collapse
There are two download links in the OP of this thread. The google drive one appears to be working. That's where I downloaded it from.
http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
Cooljb said:
There are two download links in the OP of this thread. The google drive one appears to be working. That's where I downloaded it from.
http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
Click to expand...
Click to collapse
hi,
i downloaded the rom and tried flashing the phone, but in odin it came as "Fail" and now phone is gone. it is going in recovery and the phone is not starting
jainmayur83 said:
hi,
i downloaded the rom and tried flashing the phone, but in odin it came as "Fail" and now phone is gone. it is going in recovery and the phone is not starting
Click to expand...
Click to collapse
Did the actual flash fail, or did one or more of the MD5 checks fail? What version of Odin did you use? If any of the MD5 checks failed, you just need to download the firmware again - your download was corrupted. If the actual flash failed, the most common cause is the USB cable/connection. Try another USB cable, and/or another USB port on your computer, and don't move the phone or computer around while it's flashing. Odin is very temperamental if the connection is not perfect.
Cooljb said:
Did the actual flash fail, or did one or more of the MD5 checks fail? What version of Odin did you use? If any of the MD5 checks failed, you just need to download the firmware again - your download was corrupted. If the actual flash failed, the most common cause is the USB cable/connection. Try another USB cable, and/or another USB port on your computer, and don't move the phone or computer around while it's flashing. Odin is very temperamental if the connection is not perfect.
Click to expand...
Click to collapse
Hi i tried again and the rom was successfully flashed. Now the problem is that, it is not accepting my T-mobile sim card and there are still some options missing from the settings menu, such as "mobile networks, wifi calling, hotspot and tethering.. Plz help.. I am so confused
jainmayur83 said:
Hi i tried again and the rom was successfully flashed. Now the problem is that, it is not accepting my T-mobile sim card and there are still some options missing from the settings menu, such as "mobile networks, wifi calling, hotspot and tethering.. Plz help.. I am so confused
Click to expand...
Click to collapse
I'm confused too. Are you wanting to use it on Sprint or T-Mobile? Do you have a sprint account, and did your phone activate on Sprint? I don't have any experience using a non-Sprint sim with this phone/firmware. The only thing I can suggest it maybe do a factory reset and go through the setup/activation with the T-Mobile sim already in the phone. Good luck.
If you're wanting to use both Sprint and T-Mobile on this phone, I'm not sure if that's possible. From what I've read elsewhere, even though this firmware is unlocked, it can only be active on one carrier at a time. I don't think you can switch back and forth at will, without activating/deactivating from one carrier to the other. I could be wrong though, as I have not used anything but my original Sprint sim.
Hey guys, I recently broke my s7e and got a check from Samsung to replace it. I'm looking for try cheapest way to do it and saw a deal on slickdeals with a comment that said:
The Sprint galaxy S7 edge can be flashed to be the 935U version, not sure about the non edge version. All S7 and S7e sold in the US have the same hardware though, so the Sprint version does already have the hardware for the 4x4 MIMO, flashing it to the U version if possible should be enough to put it on parity with the T-Mobile version on most things software wise (including Wi-fi calling I believe) and 100% on par hardware wise.
Yes just root, install custom recovery, download a tmobile rom that has built in aroma installer and you then own a unofficial ALL bands and services for tmobile s7
Is this at all true?
cd85233 said:
Hey guys, I recently broke my s7e and got a check from Samsung to replace it. I'm looking for try cheapest way to do it and saw a deal on slickdeals with a comment that said:
The Sprint galaxy S7 edge can be flashed to be the 935U version, not sure about the non edge version. All S7 and S7e sold in the US have the same hardware though, so the Sprint version does already have the hardware for the 4x4 MIMO, flashing it to the U version if possible should be enough to put it on parity with the T-Mobile version on most things software wise (including Wi-fi calling I believe) and 100% on par hardware wise.
Yes just root, install custom recovery, download a tmobile rom that has built in aroma installer and you then own a unofficial ALL bands and services for tmobile s7
Is this at all true?
Click to expand...
Click to collapse
Well you could probably ODIN to different firmwares, but we have a locked bootloader and therefor no custom recovery. Could also try different ROMs on the exynos versions of the phone. But since they're different hardware versions I doubt you would get 100% functional software like wifi calling and VoLTE.
CosMiiK said:
Well you could probably ODIN to different firmwares, but we have a locked bootloader and therefor no custom recovery. Could also try different ROMs on the exynos versions of the phone. But since they're different hardware versions I doubt you would get 100% functional software like wifi calling and VoLTE.
Click to expand...
Click to collapse
I thought that was the case. It was just really cheap and would be a great way to get another one if all I had to do was Odin the tmo firmware.
cd85233 said:
I thought that was the case. It was just really cheap and would be a great way to get another one if all I had to do was Odin the tmo firmware.
Click to expand...
Click to collapse
Yeah that would be a great idea. I know the phones are identical hardware wise. If I were you I'd do some more research to see if you could flash the sprint phone to tmobile through odin. I think it SHOULD work but having never tried I can't confirm.
I just flashed my Verizon 7 edge to the t mobile firmware and was able to use band 12, WiFi Calling and carrier aggregation. Should be the same for sprint.
Only thing I was told in the Verizon thread was that the firmware for t mobile is baseband 3 and the U firmware is baseband 2 so there is no going back until Verizon or U firmware is undated to baseband 3
chevydudesixty9 said:
I just flashed my Verizon 7 edge to the t mobile firmware and was able to use band 12, WiFi Calling and carrier aggregation. Should be the same for sprint.
Only thing I was told in the Verizon thread was that the firmware for t mobile is baseband 3 and the U firmware is baseband 2 so there is no going back until Verizon or U firmware is undated to baseband 3
Click to expand...
Click to collapse
Someone told me that Verizon was now in v3 with the latest update, is that not actually the case?
Akira Takamedo said:
Someone told me that Verizon was now in v3 with the latest update, is that not actually the case?
Click to expand...
Click to collapse
Not sure honestly.
chevydudesixty9 said:
I just flashed my Verizon 7 edge to the t mobile firmware and was able to use band 12, WiFi Calling and carrier aggregation. Should be the same for sprint.
Only thing I was told in the Verizon thread was that the firmware for t mobile is baseband 3 and the U firmware is baseband 2 so there is no going back until Verizon or U firmware is undated to baseband 3
Click to expand...
Click to collapse
I believe you mean the bootloader v2/v3... not baseband. Baseband is referring to modem.
Binary100100 said:
I believe you mean the bootloader v2/v3... not baseband. Baseband is referring to modem.
Click to expand...
Click to collapse
Yes. My fault. Bootloader
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
The answer is NO you're asking firmware to replace/add hardware and that's not possible
I have a Verizon branded s7 edge and used Odin to load the 935U PI3 firmware. I am on T-Mo now and do have LTE band 12 working (validated with LTE Discovery). The research that I did found that the US variants have all the radios in them, but some carrier variants of firmware disable certain bands. By doing the 935U firmware, I also got rid of the notice on every reboot that I was using a non-Verizon SIM. So I now have all T-mo bands and no stupid SIM message.
Rich7591110 said:
I would like to know if it's possible to flash the firmware for
T-mobile I'm looking to leave verizon I know that the Verizon variant does not have 2 of the lte bands that T-mobile uses can I use Odin to Flash the 935t firmware to get the band's or am I asking something that is not possible. Thanks in advance
Click to expand...
Click to collapse
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
davekung said:
I can vouch for same experience as SF-IT guy. I bought a G935V and flashed with G935U firmware via odin. Works on T-mobile, even wifi calling works. Currently on the latest PI3 version of G935U firmware. I would that you search the forum to see if you can flash the G935T firmware directly. The only downside of using G935U firmware is that the FM radio chip is not enabled in the firmware. I read that the all the carrier versions (September security patch and newer) of the G935 firmware have the FM radio chip enabled. I prefer the 935U version because it there is not carrier bloatware. Samsung bloatware is still there.
Click to expand...
Click to collapse
So what would the FM radio chip do? Just enable FM radios is all? Because if that's the downside then it's not a major setback as not too many people use the FM radio.
I don't think you can
cyoo97 said:
I don't think you can
Click to expand...
Click to collapse
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
andrewNY said:
You definitely can. All US versions of the S7 & S7 Edge are the same hardware and can be flashed to any other US firmware. (including the U firmware that automatically works on all 4 carriers)
Click to expand...
Click to collapse
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch? It seems too easy
Tin_Man_0 said:
So what you're saying is that flashing the U version firmware will unlock by default all 930"X" and 935"X" phones? As in it just unlocks the mofo and debloats some while you're at it?
What's the catch?
Click to expand...
Click to collapse
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
What if I got a temporary unlock from t-mobile unlock app and then flashed this firmware? Would it make it permanent? Seems quite possible, but I don't know if the temporary unlock actually unlocks the phone or just inserts a bypass that would disappear if flashed.
andrewNY said:
Bloat is definitely gone on the U firmware, which is great. My phone runs faster and has more free space too.
I think some carrier features aren't supported on the U firmware. On T-mobile everything works (VoLTE and Wi-Fi Calling), but I think AT&T might have some issues with those.
If the phone is SIM locked to a particular carrier, I'm not sure that automatically gets turned off or not when you switch to the U firmware. You might need to contact your carrier first to get an unlock code?
Click to expand...
Click to collapse
I unlocked my US TMo phone when stock, rooted, and am running Echoe - which has a glitch where WiFi calling sort of works (can receive calls but not make them). In the TMo forum, there are threads on U - your comments here are more specific to what I am interested.
Which U firmware are you on and are you rooted (is is updated to latest v4 bootloader version), and did you have to ODIN and full wipe with CSC or did you get by with CSC Home to preserve data?
Also, are you on U CP or did you flash TMo CP to get all the bands?.
.
duplicate - XDA burped
Thanks everyone
While enjoying the bloat-free experience on the 950U1 firmware, do I still have 4x4 MIMO and other good stuff exclusive on the t-mobile software that the phone came with? Thanks!
Not trying to revive a dead thread, but I am curious if anyone can chime in on this subject? I have the SM-G955U1, but was wondering if 4x4 MIMO, 256QAM is all running, or is it best to flash T-Mobile firmware?
Just find the thread on.flashing csc or userdata
I used T-Mobile on my U1 S8 for awhile and everything seemed to work (Wi-Fi Calling, frequency bands, etc.). However, from what I’ve heard T-Mobile seems to be the only carrier that works this well with the unlocked S8 firmware. You might be better off to try the T-Mobile firmware though, as you wouldn’t have to wonder whether or not any capabilities were supported, and carrier devices have been getting OS updates quicker than the unlocked firmware devices.
I need help please I have the 950u1 on crf6 I want to flash tmobile firmware but it says fails please someone help me