hi everybody, i bought a "case4u dz09" with mtk6261da and first day i try to flash a gt08 firmware but i didn't backup my watch. after flashing touch screed started not working. i tried many firmwares at xda and needrom.com but still my touchscreen not working. anybody can help me?
DZ09 Screen flipped and Touch screen not working
Good Day,
Really hope someone can help with this problem.
I am from South Africa bought a DZ09 from a friend for very cheap, I am 100% positive it is fake and did not make a backup of the Rom.
I Flashed it with new firmware and now when you start it up the screen is flipped and the touch screen does not respond.
I have been all over the internet and have downloaded so many ROM's and most of them i have same problem, their has been a couple where the screen has been split in two and you can hardly seen anything one the screen as it is very small.
I would like to know if it is something i am doing wrong when Flashing or is there a setting i should have enabled or something i should have done before clicking the download icon when flashing.
i use FlashTool_v5.1420.00. what is the best tool to use when flashing DZ09 ?
Below is my Software version and Device info,need a rom for this, please help
VERSION: K98D-COB-DZO9-TN8972CPT-YDT-DC3A01-HYBR-V01.08-20170705
BRANCH: 11C
UMEXOX61D1D_BT_11C
BUILD: BUILD_NO
SERIAL #:
(BUILD TIME)
2017/07/05 19:45
[MRE VERSION ] 3100
HAL_VERNO:
What is the cause of this Error ?
FLASHTOOL ERROR: S_DL_MAUI_FLAS_ID_NOT_MATCHED_WITH_TARGET (5095)
How do Fix this, i does not want to load the rom.
Well i really hope you can help with these problems
Cobus Bekker said:
Good Day,
Really hope someone can help with this problem.
I am from South Africa bought a DZ09 from a friend for very cheap, I am 100% positive it is fake and did not make a backup of the Rom.
I Flashed it with new firmware and now when you start it up the screen is flipped and the touch screen does not respond.
I have been all over the internet and have downloaded so many ROM's and most of them i have same problem, their has been a couple where the screen has been split in two and you can hardly seen anything one the screen as it is very small.
I would like to know if it is something i am doing wrong when Flashing or is there a setting i should have enabled or something i should have done before clicking the download icon when flashing.
i use FlashTool_v5.1420.00. what is the best tool to use when flashing DZ09 ?
Below is my Software version and Device info,need a rom for this, please help
VERSION: K98D-COB-DZO9-TN8972CPT-YDT-DC3A01-HYBR-V01.08-20170705
BRANCH: 11C
UMEXOX61D1D_BT_11C
BUILD: BUILD_NO
SERIAL #:
(BUILD TIME)
2017/07/05 19:45
[MRE VERSION ] 3100
HAL_VERNO:
What is the cause of this Error ?
FLASHTOOL ERROR: S_DL_MAUI_FLAS_ID_NOT_MATCHED_WITH_TARGET (5095)
How do Fix this, i does not want to load the rom.
Well i really hope you can help with these problems
Click to expand...
Click to collapse
If you want to flash it and you don't know what you're doing PLEASE DO NOT FLASH, because it will brick. At least BACKUP it then flash.
xerox4thew1n said:
Hi guys, i have read all the threads to GT08 and was succefully able to make a backup of my watch.
Also i have flashed some roms out there without any problems.
Unfortunatly i am not able to change my watchfaces. When i use the mtk resource editor v1.3 no images show up on the left side.
It would be nice if someone could help me.
Heres my Backup-Rom:
http ://s000.tinyupload. com/index.php?file_id=37132484084103061341
(remove spaces)
Thanks
Click to expand...
Click to collapse
as for you, try my firmware:
https: //drive.google.com/open?id=13GGeJcYcP7niyUP1i3IfwXbzg4_5RAQG
Related
<!-- I have searched the forums and was unable to find anything -->
He guys,
I need some help on this one. I'm still not getting the FroYo update (or the pre-update(2.1-update1).
stock/un-rooted
2.1
non-branded/SIM lock free
I did tried to manually update true the recovery mode, but I'm getting "E:signature verification failed. Installation aborted." messages on every update.zip file(obtained true http://zubu.ca/legend/fota_check.php).
The phone is USB-bricked after a failed custom rom flash.
stock rom, no usb data, no sd card(managed to fix that).
I live in the Netherlands and did see that a lot of other Dutch people got there first and second update(via comments on Androidworld.nl).
Any suggestions are welcome. I'm out of idea's
At this point I'd unbrick and root it... both howtos are in development...
Sent from my HTC Legend using XDA App
To unbrick, it needs to be rooted. to root it needs to have a working usb. So I'm punched in to a tight corner T_T
help
hello everyone.
i don't know where should i bring up this question. sorry if this is irrelevant
i just bought an htc legend. my phone is rooted one (by myself).
this is the software information:
firmware v. :2.1
baseban v :47.26.35.04u_7.05.35.26l
kernel : 2.6.29-9a3026a7 [email protected] 18-2#1
build nu : 1.31.405.4 cl150458
software nu : 1.31.405.4
browser ver : webkit 3.1
i searched for a rom which could support arabic/persian language with accessing android market .but i could n't find any stable and suitable version that does not destroy phone's root until now.
could anyone help me please ?!!!
Get your own thread!!!
eyeswideshut said:
hello everyone.
i don't know where should i bring up this question. sorry if this is irrelevant
i just bought an htc legend. my phone is rooted one (by myself).
this is the software information:
firmware v. :2.1
baseban v :47.26.35.04u_7.05.35.26l
kernel : 2.6.29-9a3026a7 [email protected] 18-2#1
build nu : 1.31.405.4 cl150458
software nu : 1.31.405.4
browser ver : webkit 3.1
i searched for a rom which could support arabic/persian language with accessing android market .but i could n't find any stable and suitable version that does not destroy phone's root until now.
could anyone help me please ?!!!
Click to expand...
Click to collapse
You are kinda off-topic here
But as far as i know, there is no Arabic/Persian ROM version(yet)
nobody els with an idea???
How about when you try update RUU ROM on a goldcard? Did you try that? Just suggesting...
Thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you xd
Edit:
DAMNED, got to 2.1-update1 no problem. update 2.2 done and now it keeps rebooting.
Edit2:
Another RUU broke the loop. all is fine now
OK after a reboot it still ends up in a endless boot loop(white screen, htc logo).
Am unable to go into the recovery mode.
Did you do a full wipe? It is usually needed when fiddling around like this...
you most certainly can get to recovery, vol down + power and then recovery? No?
Clear what you can and you'll see...
Fast-bootloader and bootloader are accessible but recovery is not. I get the same boot loop. However If i try to run a RUU it get the phone up to the black screen with htc logo. then RUU comes with a "cant find device" error and quits. the phone then boots normal on its own. USB is still broken btw.
It looks like you got the error at the worst momnent you could while flashing the first RUU... I still think it is possible to flash boot onlyby the legeimg.zip file at the very beginning (you'll notice the green text flashing in few lines) but that is a bit over my head... Maybe someone will know?
If that fails, I'd take my legend for warranty repair and lie through my teeth to have done nothing to the phone
I did try the legeimg.zip thing. but that didn't work. and i wont be having any warranty because i got this phone via a colleague of my dad. just the phone and charger.
where i can fine rom for this watch?
I break my smartwatch with the incorrect rom.
I need please the original
Anyone send me the rom???
mtk 6261da
u8 plus
Try this. You should of back up your firmware before you flash
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
sorry dont work
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
I have GT08 clone watch and your firmware i can flash to my watch but dont work touchscreen.
It will start, show the home screen and lockcreen button is working too but the touch screen do nothing. :crying::crying::crying:
Golem_s DZ-09 Firmwares arent not good for GT08, because the screen on this watches is mirrored, camera is upside-down ,...
touchscreen
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
touchscreen doesnt work
bjoesoft said:
touchscreen doesnt work
Click to expand...
Click to collapse
cmike32 said:
I have GT08 clone watch and your firmware i can flash to my watch but dont work touchscreen.
It will start, show the home screen and lockcreen button is working too but the touch screen do nothing. :crying::crying::crying:
Golem_s DZ-09 Firmwares arent not good for GT08, because the screen on this watches is mirrored, camera is upside-down ,...
Click to expand...
Click to collapse
The problem is its a clone. It isn't official that means that the watch has some random clone firmware which no body really knows whats on it.
The screen dose'nt work because the touchscreen is incompatible with the firmware. The only thing you guys could do is keep searching for GT08 32MB firmwares and keep flashing until you find the one for your watch
Also Where did you buy the watch?
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Yay
cmike32 said:
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Click to expand...
Click to collapse
cmike32 said:
I was buy this smartwatch on Aliexpress.com.
My problem is solved. :victory:
Solution :
I find ROM on 4DA russian forum of my GT08 clone (MTK61D_btdialer_11c) and i flash (FlashTool_v5.1420.00 Azeem) it and everything works.
Then I have a problem with Invalid IMEI.
I was use SN write tool and bplgu file from Golem_s firmwares of GT08 (MT6260) and i writen to the watch a correct IMEI number.
Now is my smartwatch like a new and everything is OK.
Big thanks to Golem_ and AerogamingHD.
Click to expand...
Click to collapse
Hi bro
What is the difference between the original firmware come in your watch and the new one which you flash.
Did you get any new options in your watch?
Did you add any new watch faces ?
Share us your experience with your watch
Add photos if possible.
Thanks and good luck
super leb said:
Hi bro
What is the difference between the original firmware come in your watch and the new one which you flash.
Did you get any new options in your watch?
Did you add any new watch faces ?
Share us your experience with your watch
Add photos if possible.
Thanks and good luck
Click to expand...
Click to collapse
It is just original firmware, but it is work good. It is the same like it was in watches when i bought it.
No new options, no new faces...
visit needrom.com/download/u8-modificated-firmware
/
nf1974 said:
where i can fine rom for this watch?
I break my smartwatch with the incorrect rom.
I need please the original
Anyone send me the rom???
mtk 6261da
u8 plus
Click to expand...
Click to collapse
try needrom.com for the u8 working rom ....
AerogamingHD said:
Try this. You should of back up your firmware before you flash
Click to expand...
Click to collapse
Hi, I am facing a similar problem with my gt08. its a mtk6261DA, 32mb winbond rom. i have tried all the roms posted here and on the google drive. i still couldnt find one that works for me.
I have these problems when i flash with 32mb firmware:
1. the display has inverted colors like a photo negative.
or 2. the touch doesnt work
0r 3. the touch is inverted
or 4. the screen is inverted but touch doesnt work.
or 5. the screen is inverted in colors and shifted a bit up from bottom which looks like a broken display with vertical lines.
or 6. in some cases it may be the combination of two or three of the things listed above
i just got these watches a dz09 and a gt08 both have the same board and specs.. i even verified it by opening them. but unfortunately and stupidly i didnt take a back up of the firmware and because of my bad luck i couldnt find any firmware working with that. can you help me? i saw ur firmwares on the drives.. i hope you or someone can help me thanks.
I no long have this watch.so I no longer now
even if you had a backup you cannot reflash it because on these fake watches there is no space allocated for installing anythink even 1mb of data.
Hello there. As always, I've got this weird thing for unpopular devices, and mostly breaking them.
This time it's about an Evolio X-Watch M ... or actually it is called Y1 (Yeah, it's another one of the Chinese Rebrands)
Anyway, many of the functions were broken from stock so I tried to install a few different firmwares on it. Most of them were acting weird but after a lot of work I managed to get my hands onto an Y1 firmware. Problem is that after flashing it my touchscreen stopped working.
Now, I guess my best chance would be to get my hand on the files needed to rebuild/build a MTK6261 firmware. So I was wondering if anyone around here could guide me around a bit since it's kinda hard to find stuff for MTK systems. Most of the things I found are mostly outdated.
Anyway, I was wondering if anyone could help me troubleshoot the touchscreen problem, or guide me around to the materials needed to cook my own MTK6261 firmware.
If you need more info please tell me and I'll try to provide anything I can.
Below you can find the files I used to install the firmware. It's mostly scatter-file stuff so I don't know it'll be much help to you. I was wondering if I could use those in any way to rebuild the firmware.
Help me!
ZeroTheScyther said:
Hello there. As always, I've got this weird thing for unpopular devices, and mostly breaking them.
This time it's about an Evolio X-Watch M ... or actually it is called Y1 (Yeah, it's another one of the Chinese Rebrands)
Anyway, many of the functions were broken from stock so I tried to install a few different firmwares on it. Most of them were acting weird but after a lot of work I managed to get my hands onto an Y1 firmware. Problem is that after flashing it my touchscreen stopped working.
Now, I guess my best chance would be to get my hand on the files needed to rebuild/build a MTK6261 firmware. So I was wondering if anyone around here could guide me around a bit since it's kinda hard to find stuff for MTK systems. Most of the things I found are mostly outdated.
Anyway, I was wondering if anyone could help me troubleshoot the touchscreen problem, or guide me around to the materials needed to cook my own MTK6261 firmware.
If you need more info please tell me and I'll try to provide anything I can.
Below you can find the files I used to install the firmware. It's mostly scatter-file stuff so I don't know it'll be much help to you. I was wondering if I could use those in any way to rebuild the firmware.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------------
Please, doesn´t work in my Y1 smartwatch.
My version it´s a k10-cob.. and a MT6261. Do you have this version? I can´t find...
Thanks!
Hello, I have DZ09 with MT6250 chip. Smartwatch have bluetooth and bt dialer but I don't have those apps, calibration code #*0123# shows:
imgur.com/g23THgk
this means BT driver is not loaded?
I tried to flash another ROM but I cant . I read lot of topic on XDA and what I have achived:
- readback mine ROM
- I'm able flash mine ROM only and nothing else :/
Maybe someone could help me or explain how to flash different ROM or maybe there is a way to install missing BT apps .
Link to mine ROM: www83.zippyshare.com/v/oK7rMFyG/file.html
Thanks in advice!
Hi,
I have the same watch and the same issue with Bluetooth.
Do you finf a solution?
Xavier
No :-/
Sp3cyfik said:
Hello, I have DZ09 with MT6250 chip. Smartwatch have bluetooth and bt dialer but I don't have those apps, calibration code #*0123# shows:
imgur.com/g23THgk
this means BT driver is not loaded?
I tried to flash another ROM but I cant . I read lot of topic on XDA and what I have achived:
- readback mine ROM
- I'm able flash mine ROM only and nothing else :/
Maybe someone could help me or explain how to flash different ROM or maybe there is a way to install missing BT apps .
Link to mine ROM: www83.zippyshare.com/v/oK7rMFyG/file.html
Thanks in advice!
Click to expand...
Click to collapse
Firmware K50-HYBR-V06.577-1225 does not have bluetooth application. You need download and flash K50-WB-V06_1282-0103.
Slavich90 said:
Firmware K50-HYBR-V06.577-1225 does not have bluetooth application. You need download and flash K50-WB-V06_1282-0103.
Click to expand...
Click to collapse
Do you link the firmware?
here you are
Trying to fix my radio that stopped working the touch buttons after a hard reset, I tried to install another ROM.
I know, I know, but my radio had a strange firmware and I don't know if there is a compatible firmware for it. MCU: CVD1810-WJ_19.12.30.16, Build: ZXDZ_2019.12.30.16.
I opened the radio so that I can take photos of the motherboard and labels. I'm lost here.
The radio connects to SP Flash and enters download mode, but the ROM that I got its not compatible. The screens stay black.
Please let me know what you guys think and if you can throw me a hand with a compatible firmware better...
Thanks in advance!
Any suggestions? I csant find anything on this MCU's firmware.
When searching for ac8227, what results do you get.
marchnz said:
When searching for ac8227, what results do you get.
Click to expand...
Click to collapse
marchnz, Honestly, the search that I have being doing is looking for something like the MCU and Build #'s that I had.
I have read many threads and its my believe after reading the posts, that there are many different MCU's and that I should install something like the one that I had.
Mine started CVD, and I don't know if I can use another MCU like YT9217 , YT9218 or something like that.
I dont know which software is compatible with my hardware so that I can fix it.
marchnz said:
When searching for ac8227, what results do you get.
Click to expand...
Click to collapse
Some of the firmware that are posted here are the two (2) .bin and .upd files that I cant flash with SP Flash.
And the ones that I download with have scatter txt with all other files, they give me errors on SP Flash, I assume that is because I'm trying to flash something that is not compatible with my headunit.
I got the same...
villeban said:
Some of the firmware that are posted here are the two (2) .bin and .upd files that I cant flash with SP Flash.
And the ones that I download with have scatter txt with all other files, they give me errors on SP Flash, I assume that is because I'm trying to flash something that is not compatible with my headunit.
Click to expand...
Click to collapse
Need help with brick was trying with the 2 big test points but can get it to try to flash anymore
villeban said:
Trying to fix my radio that stopped working the touch buttons after a hard reset, I tried to install another ROM.
I know, I know, but my radio had a strange firmware and I don't know if there is a compatible firmware for it. MCU: CVD1810-WJ_19.12.30.16, Build: ZXDZ_2019.12.30.16.
I opened the radio so that I can take photos of the motherboard and labels. I'm lost here.
The radio connects to SP Flash and enters download mode, but the ROM that I got its not compatible. The screens stay black.
Please let me know what you guys think and if you can throw me a hand with a compatible firmware better...
Thanks in advance!
Click to expand...
Click to collapse
Did you find a solution for this? I also have a CVD1810 ZXDZ unit which I'd like to root, but can't find much information specific to the unit..