Related
When I connect my Nexus 7 to my Windows XP (SP3) PC via USB, it's obvious the computer recognizes it and it tries to install ADB drivers. Whether I choose to install those drivers or not, I still can't locate my device in the Windows Explorer Tree. I checked Disk Management for the hell of it and nothing but my PC's harddrives were there. There's an attempt to install drivers for "MTP" but that fails and I'm pretty sure that's the cause; however, I'm unable to replicate it, even as I uninstall/reinstall applicable drivers from the device manager the MTP failure never happens anymore. I did some googling and found a thread with someone who had a similiar experience. In turn, I downloaded https://www.box.com/s/2c25e8bc42ecce400afd to try a different set of drivers. Same problem. Driver install is fine for ADB, but still unable to see my device in Windows Explorer. I'm able to successfully connect the device to the PC with PTP for the camera. I can access DCIM and cache which can serve as a work around, but I'm hoping you can provide any ideas you might have. Thank you!
edit - ***resolution***: Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
While connected to PC, I switched to PTP mode because I was about to give up and just use that
I then disabled usb debugging and switched back to MTP at which point the drivers successfully installed and I could now view my device in Windows Explorer. I also believe downloading the drivers in the link above helped since the first crack I took at this was unsuccessful with existing drivers.
install pdanet on pc and it will install drivers for u so it will be recognized
Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
Been battling with this on my XP machine since yesterday. I couldn't even get debugging to work until I installed NakedDriver. And even still, there seems to be no way to get MTP to work without turning debugging off. On my Win7 machine everything worked perfectly, both ADB and MTP, right out of the box. I have the Galaxy Nexus drivers installed on both machines (which I've read are compatible with the N7). I also have the latest version of Windows Media Player (I've read that some older versions have issues with MTP). Is anyone else able to run ADB and MTP on XP?
*edit*
A: Does PDAnet let you use MTP and ADB simultaneously? Because I really don't want to install it if I don't have to. I got rid of it ages ago (too many things starting up at boot time).
B: I have a Galaxy Nexus also, and I have no issues on the XP box.
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
asus site now has a usb driver for N7
try that
Nordendorf said:
asus site now has a usb driver for N7
try that
Click to expand...
Click to collapse
Updated with ASUS drivers, still doesn't view internal storage fully.
Salty Wagyu said:
Updated with ASUS drivers, still doesn't view internal storage fully.
Click to expand...
Click to collapse
Same here. No change with the Asus drivers. Still can't use MTP when ADB is turned on.
poo. how do I transfer my audiobooks to this stupid device without working drivers?
1. Please disconnect Nexus7
2. Remove drivers on PC.
3. Toggle ON : Settings->Wireless&Networkings->More->NFC.
4. Re-connect device
Good luck !
GotLoveForAll said:
poo. how do I transfer my audiobooks to this stupid device without working drivers?
Click to expand...
Click to collapse
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
im having trouble too, is there any way to make the device to be recognised as a flash drive?
Internal memory partly invisible from Windows 7 Explorer
Salty Wagyu said:
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
Click to expand...
Click to collapse
Same observation here (a few months later) on stock Android 4.1.1 rooted.
It seems that new files in the internal memory remain invisible for a long time, but so far they have become visible eventually, sometimes a day or two later. I have no clue what could possibly cause this, and I have not found any trick or workaround that makes them visible, not even rebooting. Any hint is welcome.
SE4GT said:
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
Click to expand...
Click to collapse
Didn't work. Just shows up as a camera with the limited folder access one would expect.
Workaround
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Same issue with an old ibm x40 udated to windows xp pro SP3.
I've installed mtp driver, without success
I've "tried" to install asus driver, without success
I've tried to do as above with the help of the nexus toolkit, without success.
Everytime, the laptop recognize the device as android ADB interface.
Someone could help me?
Thank you in advance
mistershark said:
Everytime, the laptop recognize the device as android ADB interface.
Click to expand...
Click to collapse
Disable USB debugging in your phone.
Same problem with my moto xoom...files not showing in MTP using windows xp...still have not found any solution
hgmichna said:
Disable USB debugging in your phone.
Click to expand...
Click to collapse
+1 have to toggle USB debugging in winXP
hgmichna said:
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Click to expand...
Click to collapse
It works! THANKS A LOT!!!
Hi,
This is my first Nexus device (N4), I know they have an emulated SD card, so I expected to connect it to my Win 7 PC via USB, and for the SD card directory to be shown as a file system / drive in Windows. This doesn't happen.
Phone is in MTP mode, screen isn't locked. Am I missing something here, a driver perhaps, or does this functionality no longer exist?
Thanks,
Des
You should get a Nexus 4 device along with your drives, you open that, then go to 'internal storage'
If you're not getting that, then it's probably driver related.
If it doesn't detect by USB at all, you may have a faulty device like me.
If you plug your phone into the wall with the AC adapter, does it constantly say " charging (USB)" in the battery settings?
This defect means I cannot root or charge the phone properly... It sucks..
Sent from my Nexus 4 using Tapatalk 2
Most likely a driver issue. When I have use the adb driver I cannot see my device as a storage device. Switching to the default driver Windows installs lets me see it but adb no longer works.
I ended up just using AirDroid to do any file transfers.
There are a few reports of the stock charger being reported as USB charging actually, so it might not be all bad.
The phone might be in MTP mode, but has it installed the MTP driver ? Check Device Manager.
On my own XP system, MTP wouldn't work for me until I turned off USB debugging.
Sent from my Nexus 4 using xda premium
steviewevie said:
The phone might be in MTP mode, but has it installed the MTP driver ? Check Device Manager.
On my own XP system, MTP wouldn't work for me until I turned off USB debugging.
Click to expand...
Click to collapse
^ This.
On XP, MTP does not work if USB Debugging is turned on. It may be the same for Windows 7 as well.
Same behavior on Windows 7, just fixed my issues. Thanks!
I got similar problem with my N4, yesterday I flashed Mahdi-ROM 2.4[1/02] then my USB stopped working. I can view files through PC, but cannot upload to phone. It says device has been disconnected, but it's still connected Turning off USB debuging didn't help.
I cannot even flash kernel uploaded through Airdroid, recovery gives error - cannot open zip file.
Edit: Nevermind, its PC problem. With other PC it works normal.
use universal naked drivers.
fastboot adb and mtp and ptp working.
efrant said:
^ This.
On XP, MTP does not work if USB Debugging is turned on. It may be the same for Windows 7 as well.
Click to expand...
Click to collapse
After I rooted my N4 a few months ago same thing, cannot get MTP on WinXP
Works fine on my Win7 machines though, its pretty annoying
Tried ALL the fixes I could find, no go
Uninstal all drivers, reconnect N4 let Windows install drivers, it will probably be adb device drivers, then select in device manager adb device drivers update drivers and check install from specific location and on next screen check don't search!
Then you could be able to select mtp. All of this should be done with USB debugging turned off and USB connection as mtp!
Sent from my Nexus 4 using Tapatalk
Nexus 4
zvecka said:
Uninstal all drivers, reconnect N4 let Windows install drivers, it will probably be adb device drivers, then select in device manager adb device drivers update drivers and check install from specific location and on next screen check don't search!
Then you could be able to select mtp. All of this should be done with USB debugging turned off and USB connection as mtp!
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Hey Buudy thanks this helps me
Hello, I am trying to connect my nexus 4 to my computer to put some music on. This used to work, but now it is being detected as an unknown device. I tried updating the drivers to the Universal Naked driver, but it just says the best driver is already installed. I tried with USB debugging on and off, no difference. Also tried 2 different usb cables.
Cyanogenmod Version: 10.1.1-mako
Build: JDQ39E
Thank you for any help!
jining said:
Hello, I am trying to connect my nexus 4 to my computer to put some music on. This used to work, but now it is being detected as an unknown device. I tried updating the drivers to the Universal Naked driver, but it just says the best driver is already installed. I tried with USB debugging on and off, no difference. Also tried 2 different usb cables.
Cyanogenmod Version: 10.1.1-mako
Build: JDQ39E
Thank you for any help!
Click to expand...
Click to collapse
What OS are you using? Windows? Mac? A linux distro?
Also, are you sure you're using MTP instead of PTP (Settings > Storage > menu > Usb Computer Connection) ?
You can try to install google's drivers from the android sdk as well.
vorbatello said:
What OS are you using? Windows? Mac? A linux distro?
Also, are you sure you're using MTP instead of PTP (Settings > Storage > menu > Usb Computer Connection) ?
You can try to install google's drivers from the android sdk as well.
Click to expand...
Click to collapse
I am using Windows 7, it was set to PTP, I just set to MTP, but it still does the same thing. I have turned off my USB debugging in the developer menu as well.
jining said:
I am using Windows 7, it was set to PTP, I just set to MTP, but it still does the same thing. I have turned off my USB debugging in the developer menu as well.
Click to expand...
Click to collapse
I know this is a silly thing to ask, but have you tried rebooting your phone? Something like this happened to me before and a reboot fixed it.
Also, if you have a custom kernel, check that you have USB fast charge disabled. And after that fails, try installing google's drivers. Sorry, I'm just spouting out random ideas at this point.
vorbatello said:
I know this is a silly thing to ask, but have you tried rebooting your phone? Something like this happened to me before and a reboot fixed it.
Also, if you have a custom kernel, check that you have USB fast charge disabled. And after that fails, try installing google's drivers. Sorry, I'm just spouting out random ideas at this point.
Click to expand...
Click to collapse
Thanks for the suggestions. I am using Franco kernel, how do I turn off fast charge?
jining said:
Thanks for the suggestions. I am using Franco kernel, how do I turn off fast charge?
Click to expand...
Click to collapse
Use trickster mod and go to the Kernel Specific page. If fast charge is ticked off, there's not much we can do from there.
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
Also, have you tried to install google's drivers or make a nandroid and reflash a clean rom?
EDIT: You could also try Koush's universal driver: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
I'm afraid I'm out of ideas at this point
vorbatello said:
Use trickster mod and go to the Kernel Specific page. If fast charge is ticked off, there's not much we can do from there.
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
Also, have you tried to install google's drivers or make a nandroid and reflash a clean rom?
EDIT: You could also try Koush's universal driver: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
I'm afraid I'm out of ideas at this point
Click to expand...
Click to collapse
Hmm I am in the trickster mod on the kernel specific screen, but I don't see anything about USB fast charge Where might I get googles drivers? I can't seem to install any drivers because as soon as I uninstall the unknown device, it auto installs some drivers.
Thanks for the help!
jining said:
Hmm I am in the trickster mod on the kernel specific screen, but I don't see anything about USB fast charge Where might I get googles drivers? I can't seem to install any drivers because as soon as I uninstall the unknown device, it auto installs some drivers.
Thanks for the help!
Click to expand...
Click to collapse
So I tried installing the newest Franco kernel Milestone (3), and the USB fast charge is off. I also tried installing a different CM mod, but there is no difference. I also tried installing the universal you gave me, but that didn't work, and i installed the google driver from SDK and that didn't work.
I don't know what else to do...
Hi, try to completly unninstall ALL drivers for nexus, samsung or android related, than install official drivers for nexus 4 and then connect nexus 4. Should work.
maxiiik said:
Hi, try to completly unninstall ALL drivers for nexus, samsung or android related, than install official drivers for nexus 4 and then connect nexus 4. Should work.
Click to expand...
Click to collapse
I tried that, no luck...I don't know what else to do, I have tried 3 different cables. I tried using the drivers that come with the nexus 4 toolkit, but no luck. It charges when plugged in, but i get nothing else. Also it seems like half the time its not even in the device manager as an unrecognized device, and then it intermittently pops up a window saying unrecognized device detected... maybe my USB port is broken on the phone?
Is there something simple I have overlooked to get 4.2.2 to work with my computer?
jining said:
I tried that, no luck...I don't know what else to do, I have tried 3 different cables. I tried using the drivers that come with the nexus 4 toolkit, but no luck. It charges when plugged in, but i get nothing else. Also it seems like half the time its not even in the device manager as an unrecognized device, and then it intermittently pops up a window saying unrecognized device detected... maybe my USB port is broken on the phone?
Is there something simple I have overlooked to get 4.2.2 to work with my computer?
Click to expand...
Click to collapse
Have you managed to solve this? I'm facing almost the same problem!
No, I tried for hours with no luck. I am glad I am not the only one, hopefully a solution will come to us. I have been using airdroid to transfer files from my phone in the mean time.
Im also having the same issue except my computer only recognizes my phone when its connected as a camera.
Sent from my Nexus 4 using xda app-developers app
I am having a similar problem with my daughter's Nexus 4 phone, which is not rooted nor unlocked - it is still completely stock. It was just updated to Android 4.3, however I can't say that this is the cause of the problem because she never attempted to connect her phone to the desktop machine before.
I have a Windows 7 x64 box at home, and spent over two hours last night trying to get the computer to correctly recognize the Nexus 4 phone. I was hoping that the standard MTP Windows driver would handle it perfectly, but no luck. I tried the Google usb drivers, and the ADB interface was recognized, but still no access to the internal storage. I then gave the Naked Drivers a try, and no joy there either.
I am beginning to suspect that the MTP drivers on my desktop are munged, but do not relish the thought of a Win 7 wipe and reinstall.
Anyone else have any ideas?
Thanks much!
I am having a similar problem where I have USB storage set to MTP and Windows doesn't pick it up, whereas PTP Windows will pick up but I can't access any folders other than the camera related folders like DCIM.
So my workaround is doing it the old fashioned way through CMD in windows using adb push.
Example:
Assuming you have all the stuff you want to transfer in a folder called stuff, adb is located in C:\adb, and your folder known as stuff is also in C:\adb:
C:\adb>adb push stuff /data/media/0
The above command starting from the ">" will transfer all files in the folder called stuff to the root of /sdcard. In the N4, /sdcard is symbolically linked to /data/media/0.
Of course you need USB debugging enabled for this to work...
Device Manager (Hopefully this helps)
In the start menu type device manager, in that window you should see android and or something similar at the top. You want to drop the menu down and right click what should say Google ADB Interface and delete it, make sure you check the confirmation box. After reboot your computer! Once booted plug your phone in a viola!!!
I'm having a similar issue.
I can open device manager but there in no Android anything listed. All that comes up when I plug my phone in is 'unrecognized usb device'. I have 5 different cable I have tired. The OS will only bring up the usb error in a USB 3.0 port. It will not do anything if I use the 2.0 port.
I have gone and tried to manually update the drivers through the device manager but when I select the drivers from Android SKD or any of the other driver packs I get an error that it is not a x64 driver.
I found one suggestion about modding the driver to include the device but windows will not even recognize the device other than a unknown usb.
I'm going to have a bricked computer soon. Any help would be appreciated.
Roktgr said:
I'm having a similar issue.
I can open device manager but there in no Android anything listed. All that comes up when I plug my phone in is 'unrecognized usb device'. I have 5 different cable I have tired. The OS will only bring up the usb error in a USB 3.0 port. It will not do anything if I use the 2.0 port.
I have gone and tried to manually update the drivers through the device manager but when I select the drivers from Android SKD or any of the other driver packs I get an error that it is not a x64 driver.
I found one suggestion about modding the driver to include the device but windows will not even recognize the device other than a unknown usb.
I'm going to have a bricked computer soon. Any help would be appreciated.
Click to expand...
Click to collapse
First, Google universal naked drivers xda. Try those. If they don't work go into device manager and go to where it says let me choose drivers from my computer. Then look for the android composite adb interface.
If you're on win 8 you'll need to allow unsigned drivers. Google how to do that
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
First, Google universal naked drivers xda. Try those. If they don't work go into device manager and go to where it says let me choose drivers from my computer. Then look for the android composite adb interface.
If you're on win 8 you'll need to allow unsigned drivers. Google how to do that
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#1 is the phone doesn't do anything in USB debug mode. I keep seeing references to having to approve the computer connection but I haven't seen that yet. I have tired 9 usb ports. 6 on my main computer will not bring anything, not even the usb drive. 3 on the labtop will only bring up a 'unrecognized usb drive'.
#2 is the computer will not recognize the device in anything other than a 'unrecognized usb drive' (UUD). Everyone keeps mentioning the Android Composite ADB interface. It's not there, it doesn't show up or as an option. I can go into the device manager and find the UUD and try and update the driver via the manual method with a disk but it doesn't list any type of hardware that is related to Android or ADB.
Roktgr said:
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#1 is the phone doesn't do anything in USB debug mode. I keep seeing references to having to approve the computer connection but I haven't seen that yet. I have tired 9 usb ports. 6 on my main computer will not bring anything, not even the usb drive. 3 on the labtop will only bring up a 'unrecognized usb drive'.
Click to expand...
Click to collapse
Hello,
"#1 is the phone doesn't do anything in USB debug mode." This is normal!
How I experienced the USB debugging option is that, if turned ON:
1. The Nexus does not appear in my Windows env
2. BUT when in recovery mode, I can use the "adb" commands
If USB debugging turned OFF:
1. Then I CAN see the Nexus in my Windows env
2. BUT I cannot use the "adb" commands in recovery mode.
So you definitely need to have the USB debugging option turned off if you want to see your nexus in Windows, IMO
---------- Post added at 04:16 PM ---------- Previous post was at 04:02 PM ----------
Roktgr said:
Windows 7x64 on all machines. I am trying this on 2 work computers and getting the same result. I have 2 issues that I think are the root of the issue.
#2 is the computer will not recognize the device in anything other than a 'unrecognized usb drive' (UUD). Everyone keeps mentioning the Android Composite ADB interface. It's not there, it doesn't show up or as an option. I can go into the device manager and find the UUD and try and update the driver via the manual method with a disk but it doesn't list any type of hardware that is related to Android or ADB.
Click to expand...
Click to collapse
I think you really have an issue with the drivers. I would install the Google USB drivers. Maybe a bit heavy but then you can be sure that drivers are fine:
http://developer.android.com/sdk/win-usb.html
Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.
Go to dev options, switch the USB from ptp back to mtp and it works for me
xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.
Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.
Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue
My Win10 Insider Preview machine did not recognize the phone. Nothing happened when I connected the phone and I could not access storage of the phone.
Below is the solution for it:
Go to Control Panel - Device Manager - LeMobile Android Device (could be under a different name. Choose the one that is your phone) - Update Driver - Manually Install a Driver - Let me pick a list of available drivers on my computer - MTP USB .
4K2K said:
My Win10 Insider Preview machine did not recognize the phone. Nothing happened when I connected the phone and I could not access storage of the phone.
Below is the solution for it:
Go to Control Panel - Device Manager - LeMobile Android Device (could be under a different name. Choose the one that is your phone) - Update Driver - Manually Install a Driver - Let me pick a list of available drivers on my computer - MTP USB .
Click to expand...
Click to collapse
Uhm ... when you connected the phone to computer you changed the mode on phone from USB charging to MTP mode ?
In my Win10 x64 build 14392.447 not problem to see the phone in MTP mode after changing mode on phone.
Alternative solution is to use KDE Connect app over Wifi. Bonus is that once set up, it is possible to push files from the phone to the PC without any interaction on the PC side - e.g. useful if the PC doubles as a file server.
losteagle said:
Uhm ... when you connected the phone to computer you changed the mode on phone from USB charging to MTP mode ?
In my Win10 x64 build 14392.447 not problem to see the phone in MTP mode after changing mode on phone.
Click to expand...
Click to collapse
Both of my home & works computer (Win10 14959) failed to detect it as MTP or PTP drive. Might have been due to those having previous phone's drivers.
But I faced same problem with fresh out of the box Win8 laptop.
No issue with the MTP, however I can't seem to get adb to work. list of devices attached is showing empty.
ksj0823 said:
No issue with the MTP, however I can't seem to get adb to work. list of devices attached is showing empty.
Click to expand...
Click to collapse
I had the same issue, i reinstalled minimal ADB and removed the drivers from my pc, rebooted my pc. Plugged the phone into a different USB port and voilá ADB could see it
Citroon said:
I had the same issue, i reinstalled minimal ADB and removed the drivers from my pc, rebooted my pc. Plugged the phone into a different USB port and voilá ADB could see it
Click to expand...
Click to collapse
Wanted to add my voice here too that I did the same - I had to clean up previous drivers I had installed over time for varios phones and different ADB versions like the one from clockworkmod - once I cleaned that out and installed google drivers from SDK PTP worked and I was able to do Helium restores
I had issue on my Win10 PC, but I found that after I disabled USB debugging, it would work as MTP/PTP, but not for ADB of course. So apparently, I have to toggle USB debugging ON/OFF to switch back and forth from MTP and ADB.
Small pain in the butt.
Solution.
I had the same issue. Drove me NUTS for about an hour. In the end, simply unchecked the USB DEBUGING in developer settings. This will make it pop up immediately.
Update:
I clearly should have read the post above mine first.