Hi everyone,
I posted this thread in general troubleshooting category and after some advice, I decided to post it in the S4 section.
I was since 3 years on custom ROM (CM and Lineage OS) and due to substratum, I had a bootloop.
My problem is quite particular, after a total clean (wipe and format cache,system,data, dalvik cache) of my device and flashing the stock ROM, custom recovery cause me some trouble.
Whatever I try (CWM touch 6 or TWPR 3.1.1), I can't flash custom ROM (Lineage OS 14.1), TWPR or CWM crash 1 second after the flash command and reboot, with disable touchscreen and even by using old navigation way and try again, same problem.
Tried also to disable file signature check but no effect.
Quick summary about what I did:
- Device: Samsung Galaxy S4 (GT-I9505)
- ROM stock used: I9505XXUHOJ2 ( the build on which is based the CF-Root file I used) and Bulgarian version due to mistake.
- I tried on these two ROM with in the two cases, no patch or Samsung ROM update made.
- Tried to install CWM by ROM Manager and ODIN (v3.09)
- TWPR installed by TWPR App using file in .img and not the second option (tar.img) for LTE Internationnal Qualcomm.
-Checked the root before last attempt with root checker and it was ok.
- Made 4 times already the clean and Stock ROM flash to clean recovery and try another way to install it (never had error after recovery install).
Actually I'm on the OJ2 Rom with update and patch delivered by Samsung with classic method.
In advance thanks for your help and I really hope it's not too serious.
By the way, sorry for my english, it's not my native language
Try flashing the stock ROM from sammobile.com or updato.com, don't root, use Odin 3.07 to flash the tar version of TWRP 2.8.7, try flashing a custom ROM.
Thx for the help/advice
Just to be sure, my stock ROM is actually from up updato.com but due to the patch and Samsung update I'm now on HPK2.
Here the detail of my stock ROM
https://image.noelshack.com/fichiers/2018/05/4/1517503670-screenshot-2018-02-01-17-43-00.png
(the integrated image link option made it as large as the moon so I prefer a simple link)
TWPR 2.8.7 is still efficient or another version would be better ?
If yes, I will try in the hour and I will give you news as soon as possible
EDIT: After some research, TWPR 2.8.7 jfltexx is not avaible in .tar , only .img and impossible to find it on net...
But 2.8.6 and 2.8.4 are avaible in .tar and 3.0.0 in .img.tar , which one is the best ?
I suggested 2.8.7 because Ihave used it in the past and it was very stable. Try a newer tar version. It's really just to see if the phone will take TWRP and boot it.
Whatever I try (TWRP 3.0.0 and 3.0.1 in .img.tar for jlftexx)
Odin (v3.07) do the job , my phone reboot as normal.
But when I shutdown it and lauch in recovery by manual way, got during a micro seconds the android logo of loading and intant "No commands " and I end on the stock recovery.
Edit: I will try the same method with Odin using CWM tar (never had problem with it before this day)
Same thing with CWM-v6.0.4.7-Touch-GT-I9505.tar
Android loading logo and "No command detected"
Problem solved
Well, I don't know how I made a sucess but it seems the "wild" method worked.
So here is the list of things I did in case somepne got the same trouble
Put your Zip file on SD AND Internal Memory (in case)
All the Zip files I used where on my internal storage during this procedure.
- Download mode:
uncheck Auto Reboot in Odin
flash TWRP3.0.1.0 jlftexx.img.tar with ODIN in admin mode
turn off device after flash ended
Obligation or the stock recovery will return automatically !
Lauch device in recovery mode:
If it's TWRP good news, slide to confirm modifications.
Recovery mode:
-Wipe --> Advanced Wipe--> Select Cache, Dalvik Cache, Sytem and Data (never check internal and SD storage)
I tried by mistake without wiping dalvik cache, and got no boot after 5 minutes so i made it again with all the wipe above
-Install --> Flash zip of the rom and Gapps (got an error at zip signature check on the ROM so I flashed after uncheck this option)
-Reboot --> System
Let your device launch on the new rom, set the basic parameters and after, if you want, return in recovery to flash the SU addon for root (got also zip sugnature fail so I ahd to uncheck it again)
Hoping no one will ever had the same problem but in case, I share my solution
Thanks again for help
I have a J7 Pro (J730G/DS) and I was wondering if its possible to install ANY rom that is 64bit as my CPU does indeed support 64bit but my OS is only 32.
I want to use this smartphone as an emulation device but most modern emulators such as Citra and Dolphin require 64bit Android
if its possible, can anyone link a guide on how to change my rom to a 64bit one?
I recommend installing a custom Treble rom, as they are all arm64.
For that I recommend first to create a Vendor partition(with recovery) using the file Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875)
Then recommend you to install this ROM: https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
And you will have a 64 bit OS.
death.by.confusion said:
I recommend installing a custom Treble rom, as they are all arm64.
For that I recommend first to create a Vendor partition(with recovery) using the file Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875)
Then recommend you to install this ROM: https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
And you will have a 64 bit OS.
Click to expand...
Click to collapse
Thank you for the help, do you maybe have a guide for me? never installed a custom ROM before
[GUIDE][J730X] A beginer's guide to installing custom ROM on Samsung Galaxy J7 2017
In order to install a custom ROM, the general steps are to: Unlock bootloader, Install custom recovery, make a backup of your current stock ROM, and then go to install a custom ROM.
NOTE: It is good idea to note your software version and your baseband version right now(enter *#1234# on dial pad)
This is so you can find your stock ROM on https://www.sammobile.com/ and flash with Odin tool.
Unlock bootloader
In our samsung phone it is very easy to unlock the bootloader. All you have to do is go to Developer options and enable OEM Unlock(something similar to the image below)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To enable Developer options, you go in About phone, and press on the field Build Number multiple times(something similar to the image below)
Install custom recovery
There are multiple choices for custom recovery for our samsung phone. I recommend to install TWRP 3.3.0(link here https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases)
You need samsung USB drivers(link here https://developer.samsung.com/mobile/android-usb-driver.html and the
the Odin tool(for flashing the recovery)(link here https://odinflashtool.com/download/odin3-v3-13-1/
1. Turn your phone in to Download mode. For that, first power off your phone, and then hold POWER button together with volume DOWN and HOME button, then connect the phone with USB cable on the computer.
2. Open Odin tool
3. In the options tab, uncheck auto reboot
4. Select the custom recovery image in to AP field(the exact file name of recovery from link is TWRP-3.3.0-j7y17lte-20190417.tar
5. Start flashing.
6. Now, hold POWER, volume DOWN, volume UP and HOME button together until your screen on the phone goes back, then instantly hold POWER, Volume UP and HOME button together, so you boot in to the installed recovery.
7. You should see the installed recovery working.
Set up internal storage so the recovery works properly
Warning: This operation WILL DELETE EVERYTHING ON YOUR INTERNAL STORAGE. COPY YOUR FILES ELSEWHERE.
Use your installed recovery to wipe the internal storage, so it becomes available for usage.
Select the option Wipe, then Format data, and then confirm the operation.
No you should be able to use your recovery for other operations.
Make a backup of your current stock ROM
Use your installed recovery to make a backup of your current stock ROM.
Select the option Backup, and then select all partitions, then confirm the backup operation.
After this, don't forget to copy the backup in your computer. For that, you can plug your phone to PC while you are in recovery, and then you can just copy the backup. The backup is stored in the folder named TWRP.
Install a custom ROM
You can use your recovery to install a custom ROM.
The general steps for installing a custom ROM are:
1. Wipe the partitions Data, Dalvik/Cache, System
2. Download the ROM that is a zip file and store the zip file in phone(either internal memory or SD CARD)
3. Use the install option in recovery to install the ROM
4. Reboot the phone.
Install a custom TREBLE ROM
Treble ROMS are different than regular custom ROMS, because they need the phone to have an additional Vendor partition.
To create a Vendor partition, use your recovery to install the zip Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875) and reboot your phone in to recovery so the recovery detects the new vendor partition.
Then you need to flash a particular vendor(Either Project Treblue, or H-VENDOR).
After that, you can wipe the partitions(Data, Dalvik/Cache, System) and flash the custom TREBLE ROM.
I recommend to flash this custom TREBLE ROM: crDROID https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
To flash crDROID, first install the zip Exynos7870_CreateVendor_2.0.zip, reboot your phone in to recovery, and then flash crDROID(note that the vendor is included in crDROID).
Revert to stock ROM
You can use Odin tool to flash the stock rom. First find your stock rom on https://www.sammobile.com/, unpack the downloaded ROM, and then use Odin tool to flash all the files(BL,AP,CP, CSC)
To revert to stock ROM using your recovery, first install the zip Exynos7870_RevertVendor_2.0.zip(link here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875), reboot your phone in to recovery so the recovery detects that the vendor partition is gone, and then restore your previously created backup.
death.by.confusion said:
In order to install a custom ROM, the general steps are to: Unlock bootloader, Install custom recovery, make a backup of your current stock ROM, and then go to install a custom ROM.
NOTE: It is good idea to note your software version and your baseband version right now(enter *#1234# on dial pad)
This is so you can find your stock ROM on https://www.sammobile.com/ and flash with Odin tool.
Unlock bootloader
In our samsung phone it is very easy to unlock the bootloader. All you have to do is go to Developer options and enable OEM Unlock(something similar to the image below)
To enable Developer options, you go in About phone, and press on the field Build Number multiple times(something similar to the image below)
Install custom recovery
There are multiple choices for custom recovery for our samsung phone. I recommend to install TWRP 3.3.0(link here https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases)
You need samsung USB drivers(link here https://developer.samsung.com/mobile/android-usb-driver.html and the
the Odin tool(for flashing the recovery)(link here https://odinflashtool.com/download/odin3-v3-13-1/
1. Turn your phone in to Download mode. For that, first power off your phone, and then hold POWER button together with volume DOWN and HOME button, then connect the phone with USB cable on the computer.
2. Open Odin tool
3. In the options tab, uncheck auto reboot
4. Select the custom recovery image in to AP field(the exact file name of recovery from link is TWRP-3.3.0-j7y17lte-20190417.tar
5. Start flashing.
6. Now, hold POWER, volume DOWN, volume UP and HOME button together until your screen on the phone goes back, then instantly hold POWER, Volume UP and HOME button together, so you boot in to the installed recovery.
7. You should see the installed recovery working.
Set up internal storage so the recovery works properly
Warning: This operation WILL DELETE EVERYTHING ON YOUR INTERNAL STORAGE. COPY YOUR FILES ELSEWHERE.
Use your installed recovery to wipe the internal storage, so it becomes available for usage.
Select the option Wipe, then Format data, and then confirm the operation.
No you should be able to use your recovery for other operations.
Make a backup of your current stock ROM
Use your installed recovery to make a backup of your current stock ROM.
Select the option Backup, and then select all partitions, then confirm the backup operation.
After this, don't forget to copy the backup in your computer. For that, you can plug your phone to PC while you are in recovery, and then you can just copy the backup. The backup is stored in the folder named TWRP.
Install a custom ROM
You can use your recovery to install a custom ROM.
The general steps for installing a custom ROM are:
1. Wipe the partitions Data, Dalvik/Cache, System
2. Download the ROM that is a zip file and store the zip file in phone(either internal memory or SD CARD)
3. Use the install option in recovery to install the ROM
4. Reboot the phone.
Install a custom TREBLE ROM
Treble ROMS are different than regular custom ROMS, because they need the phone to have an additional Vendor partition.
To create a Vendor partition, use your recovery to install the zip Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875) and reboot your phone in to recovery so the recovery detects the new vendor partition.
Then you need to flash a particular vendor(Either Project Treblue, or H-VENDOR).
After that, you can wipe the partitions(Data, Dalvik/Cache, System) and flash the custom TREBLE ROM.
I recommend to flash this custom TREBLE ROM: crDROID https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
To flash crDROID, first install the zip Exynos7870_CreateVendor_2.0.zip, reboot your phone in to recovery, and then flash crDROID(note that the vendor is included in crDROID).
Revert to stock ROM
You can use Odin tool to flash the stock rom. First find your stock rom on https://www.sammobile.com/, unpack the downloaded ROM, and then use Odin tool to flash all the files(BL,AP,CP, CSC)
To revert to stock ROM using your recovery, first install the zip Exynos7870_RevertVendor_2.0.zip(link here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875), reboot your phone in to recovery so the recovery detects that the vendor partition is gone, and then restore your previously created backup.
Click to expand...
Click to collapse
Thank you very much but I have a problem, when I try to install CreateVendor or crDroid I get an error in TWRP "failed to mount /preload (invalid argument)
any fix for that?
LidorTzruya said:
Thank you very much but I have a problem, when I try to install CreateVendor or crDroid I get an error in TWRP "failed to mount /preload (invalid argument)
any fix for that?
Click to expand...
Click to collapse
This is not an error that will break your phone. TWRP will install the ROM successfuly, so don't worry about the error. Since there is a Vendor partition, it is natural that the phone won't have a preload partition, so TWRP won't be able to mount it.
Now how is the ROM working?
death.by.confusion said:
This is not an error that will break your phone. TWRP will install the ROM successfuly, so don't worry about the error. Since there is a Vendor partition, it is natural that the phone won't have a preload partition, so TWRP won't be able to mount it.
Now how is the ROM working?
Click to expand...
Click to collapse
it works well! thank you! I tried installing GApps (ARM64, android 10, stock) and that just puts the phone into a bootloop, so I re-installed the rom. maybe you know what it happens?
LidorTzruya said:
it works well! thank you! I tried installing GApps (ARM64, android 10, stock) and that just puts the phone into a bootloop, so I re-installed the rom. maybe you know what it happens?
Click to expand...
Click to collapse
I don't use GAPPS, so i don't know what would be the problem.
I suggest you install pico package instead of the stock package.
If still not working, then I suggest you install bitgapps.
death.by.confusion said:
In order to install a custom ROM, the general steps are to: Unlock bootloader, Install custom recovery, make a backup of your current stock ROM, and then go to install a custom ROM.
NOTE: It is good idea to note your software version and your baseband version right now(enter *#1234# on dial pad)
This is so you can find your stock ROM on https://www.sammobile.com/ and flash with Odin tool.
Unlock bootloader
In our samsung phone it is very easy to unlock the bootloader. All you have to do is go to Developer options and enable OEM Unlock(something similar to the image below)
To enable Developer options, you go in About phone, and press on the field Build Number multiple times(something similar to the image below)
Install custom recovery
There are multiple choices for custom recovery for our samsung phone. I recommend to install TWRP 3.3.0(link here https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases)
You need samsung USB drivers(link here https://developer.samsung.com/mobile/android-usb-driver.html and the
the Odin tool(for flashing the recovery)(link here https://odinflashtool.com/download/odin3-v3-13-1/
1. Turn your phone in to Download mode. For that, first power off your phone, and then hold POWER button together with volume DOWN and HOME button, then connect the phone with USB cable on the computer.
2. Open Odin tool
3. In the options tab, uncheck auto reboot
4. Select the custom recovery image in to AP field(the exact file name of recovery from link is TWRP-3.3.0-j7y17lte-20190417.tar
5. Start flashing.
6. Now, hold POWER, volume DOWN, volume UP and HOME button together until your screen on the phone goes back, then instantly hold POWER, Volume UP and HOME button together, so you boot in to the installed recovery.
7. You should see the installed recovery working.
Set up internal storage so the recovery works properly
Warning: This operation WILL DELETE EVERYTHING ON YOUR INTERNAL STORAGE. COPY YOUR FILES ELSEWHERE.
Use your installed recovery to wipe the internal storage, so it becomes available for usage.
Select the option Wipe, then Format data, and then confirm the operation.
No you should be able to use your recovery for other operations.
Make a backup of your current stock ROM
Use your installed recovery to make a backup of your current stock ROM.
Select the option Backup, and then select all partitions, then confirm the backup operation.
After this, don't forget to copy the backup in your computer. For that, you can plug your phone to PC while you are in recovery, and then you can just copy the backup. The backup is stored in the folder named TWRP.
Install a custom ROM
You can use your recovery to install a custom ROM.
The general steps for installing a custom ROM are:
1. Wipe the partitions Data, Dalvik/Cache, System
2. Download the ROM that is a zip file and store the zip file in phone(either internal memory or SD CARD)
3. Use the install option in recovery to install the ROM
4. Reboot the phone.
Install a custom TREBLE ROM
Treble ROMS are different than regular custom ROMS, because they need the phone to have an additional Vendor partition.
To create a Vendor partition, use your recovery to install the zip Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875) and reboot your phone in to recovery so the recovery detects the new vendor partition.
Then you need to flash a particular vendor(Either Project Treblue, or H-VENDOR).
After that, you can wipe the partitions(Data, Dalvik/Cache, System) and flash the custom TREBLE ROM.
I recommend to flash this custom TREBLE ROM: crDROID https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
To flash crDROID, first install the zip Exynos7870_CreateVendor_2.0.zip, reboot your phone in to recovery, and then flash crDROID(note that the vendor is included in crDROID).
Revert to stock ROM
You can use Odin tool to flash the stock rom. First find your stock rom on https://www.sammobile.com/, unpack the downloaded ROM, and then use Odin tool to flash all the files(BL,AP,CP, CSC)
To revert to stock ROM using your recovery, first install the zip Exynos7870_RevertVendor_2.0.zip(link here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875), reboot your phone in to recovery so the recovery detects that the vendor partition is gone, and then restore your previously created backup.
Click to expand...
Click to collapse
Hello sir, im just newbie about updating phone like this so i just follow your step above and now my phone going to CRDROID after SAMSUNG screen, is this ok or wrong ?? i still be able to use my phone but the problem is my sim card is not detected, and also i miss the part of revert stock rom, and when i try to revert stock rom my phone say there is no OS inside. Maybe you know what should i do sir ? at least my simcard detected and i have signal to do whatsapp and other else, thank you sir
death.by.confusion said:
In order to install a custom ROM, the general steps are to: Unlock bootloader, Install custom recovery, make a backup of your current stock ROM, and then go to install a custom ROM.
NOTE: It is good idea to note your software version and your baseband version right now(enter *#1234# on dial pad)
This is so you can find your stock ROM on https://www.sammobile.com/ and flash with Odin tool.
Unlock bootloader
In our samsung phone it is very easy to unlock the bootloader. All you have to do is go to Developer options and enable OEM Unlock(something similar to the image below)
To enable Developer options, you go in About phone, and press on the field Build Number multiple times(something similar to the image below)
Install custom recovery
There are multiple choices for custom recovery for our samsung phone. I recommend to install TWRP 3.3.0(link here https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases)
You need samsung USB drivers(link here https://developer.samsung.com/mobile/android-usb-driver.html and the
the Odin tool(for flashing the recovery)(link here https://odinflashtool.com/download/odin3-v3-13-1/
1. Turn your phone in to Download mode. For that, first power off your phone, and then hold POWER button together with volume DOWN and HOME button, then connect the phone with USB cable on the computer.
2. Open Odin tool
3. In the options tab, uncheck auto reboot
4. Select the custom recovery image in to AP field(the exact file name of recovery from link is TWRP-3.3.0-j7y17lte-20190417.tar
5. Start flashing.
6. Now, hold POWER, volume DOWN, volume UP and HOME button together until your screen on the phone goes back, then instantly hold POWER, Volume UP and HOME button together, so you boot in to the installed recovery.
7. You should see the installed recovery working.
Set up internal storage so the recovery works properly
Warning: This operation WILL DELETE EVERYTHING ON YOUR INTERNAL STORAGE. COPY YOUR FILES ELSEWHERE.
Use your installed recovery to wipe the internal storage, so it becomes available for usage.
Select the option Wipe, then Format data, and then confirm the operation.
No you should be able to use your recovery for other operations.
Make a backup of your current stock ROM
Use your installed recovery to make a backup of your current stock ROM.
Select the option Backup, and then select all partitions, then confirm the backup operation.
After this, don't forget to copy the backup in your computer. For that, you can plug your phone to PC while you are in recovery, and then you can just copy the backup. The backup is stored in the folder named TWRP.
Install a custom ROM
You can use your recovery to install a custom ROM.
The general steps for installing a custom ROM are:
1. Wipe the partitions Data, Dalvik/Cache, System
2. Download the ROM that is a zip file and store the zip file in phone(either internal memory or SD CARD)
3. Use the install option in recovery to install the ROM
4. Reboot the phone.
Install a custom TREBLE ROM
Treble ROMS are different than regular custom ROMS, because they need the phone to have an additional Vendor partition.
To create a Vendor partition, use your recovery to install the zip Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875) and reboot your phone in to recovery so the recovery detects the new vendor partition.
Then you need to flash a particular vendor(Either Project Treblue, or H-VENDOR).
After that, you can wipe the partitions(Data, Dalvik/Cache, System) and flash the custom TREBLE ROM.
I recommend to flash this custom TREBLE ROM: crDROID https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
To flash crDROID, first install the zip Exynos7870_CreateVendor_2.0.zip, reboot your phone in to recovery, and then flash crDROID(note that the vendor is included in crDROID).
Revert to stock ROM
You can use Odin tool to flash the stock rom. First find your stock rom on https://www.sammobile.com/, unpack the downloaded ROM, and then use Odin tool to flash all the files(BL,AP,CP, CSC)
To revert to stock ROM using your recovery, first install the zip Exynos7870_RevertVendor_2.0.zip(link here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875), reboot your phone in to recovery so the recovery detects that the vendor partition is gone, and then restore your previously created backup.
Click to expand...
Click to collapse
Hi, I tried it on my J7 Pro (j730g/ds), but it stuck on cdroid logo. What I do
1. Install TWRP and format /data
2. Install Exynos7870_CreateVendor_2.0.zip and reboot to recovery
3. And Install crDroid 6.9 (without gapps)
4. Reboot
But phone it bootloop on cdroid logo.
Any help is Appreciate
Sorry for my bad english before.
suciprimawati said:
Hi, I tried it on my J7 Pro (j730g/ds), but it stuck on cdroid logo. What I do
1. Install TWRP and format /data
2. Install Exynos7870_CreateVendor_2.0.zip and reboot to recovery
3. And Install crDroid 6.9 (without gapps)
4. Reboot
But phone it bootloop on cdroid logo.
Any help is Appreciate
Sorry for my bad english before.
Click to expand...
Click to collapse
Do not flash cdroid, flash a treble rom instead. It should have a extension of .img instead of .zip
After flashing Exynos7870_CreateVendor_2.0.zip，flash skyhawk recovery project.
https://forum.xda-developers.com/ga.../unofficial-skyhawk-recovery-project-t4107145, rebooting into skywawk recovery,you should flash H-Vendor.
https://forum.xda-developers.com/galaxy-j7-2017/development/treble-h-vendor-v1-0-t4116277
Without rebooting immediately flash gsi image.
after flashing reboot device.
death.by.confusion said:
[GUIDE][J730X] A beginer's guide to installing custom ROM on Samsung Galaxy J7 2017
In order to install a custom ROM, the general steps are to: Unlock bootloader, Install custom recovery, make a backup of your current stock ROM, and then go to install a custom ROM.
NOTE: It is good idea to note your software version and your baseband version right now(enter *#1234# on dial pad)
This is so you can find your stock ROM on https://www.sammobile.com/ and flash with Odin tool.
Unlock bootloader
In our samsung phone it is very easy to unlock the bootloader. All you have to do is go to Developer options and enable OEM Unlock(something similar to the image below)
To enable Developer options, you go in About phone, and press on the field Build Number multiple times(something similar to the image below)
Install custom recovery
There are multiple choices for custom recovery for our samsung phone. I recommend to install TWRP 3.3.0(link here https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases)
You need samsung USB drivers(link here https://developer.samsung.com/mobile/android-usb-driver.html and the
the Odin tool(for flashing the recovery)(link here https://odinflashtool.com/download/odin3-v3-13-1/
1. Turn your phone in to Download mode. For that, first power off your phone, and then hold POWER button together with volume DOWN and HOME button, then connect the phone with USB cable on the computer.
2. Open Odin tool
3. In the options tab, uncheck auto reboot
4. Select the custom recovery image in to AP field(the exact file name of recovery from link is TWRP-3.3.0-j7y17lte-20190417.tar
5. Start flashing.
6. Now, hold POWER, volume DOWN, volume UP and HOME button together until your screen on the phone goes back, then instantly hold POWER, Volume UP and HOME button together, so you boot in to the installed recovery.
7. You should see the installed recovery working.
Set up internal storage so the recovery works properly
Warning: This operation WILL DELETE EVERYTHING ON YOUR INTERNAL STORAGE. COPY YOUR FILES ELSEWHERE.
Use your installed recovery to wipe the internal storage, so it becomes available for usage.
Select the option Wipe, then Format data, and then confirm the operation.
No you should be able to use your recovery for other operations.
Make a backup of your current stock ROM
Use your installed recovery to make a backup of your current stock ROM.
Select the option Backup, and then select all partitions, then confirm the backup operation.
After this, don't forget to copy the backup in your computer. For that, you can plug your phone to PC while you are in recovery, and then you can just copy the backup. The backup is stored in the folder named TWRP.
Install a custom ROM
You can use your recovery to install a custom ROM.
The general steps for installing a custom ROM are:
1. Wipe the partitions Data, Dalvik/Cache, System
2. Download the ROM that is a zip file and store the zip file in phone(either internal memory or SD CARD)
3. Use the install option in recovery to install the ROM
4. Reboot the phone.
Install a custom TREBLE ROM
Treble ROMS are different than regular custom ROMS, because they need the phone to have an additional Vendor partition.
To create a Vendor partition, use your recovery to install the zip Exynos7870_CreateVendor_2.0.zip(download from here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875) and reboot your phone in to recovery so the recovery detects the new vendor partition.
Then you need to flash a particular vendor(Either Project Treblue, or H-VENDOR).
After that, you can wipe the partitions(Data, Dalvik/Cache, System) and flash the custom TREBLE ROM.
I recommend to flash this custom TREBLE ROM: crDROID https://forum.xda-developers.com/galaxy-j7-2017/development/unofficial-crdroid-6-7-t4119505
To flash crDROID, first install the zip Exynos7870_CreateVendor_2.0.zip, reboot your phone in to recovery, and then flash crDROID(note that the vendor is included in crDROID).
Revert to stock ROM
You can use Odin tool to flash the stock rom. First find your stock rom on https://www.sammobile.com/, unpack the downloaded ROM, and then use Odin tool to flash all the files(BL,AP,CP, CSC)
To revert to stock ROM using your recovery, first install the zip Exynos7870_RevertVendor_2.0.zip(link here https://forum.xda-developers.com/galaxy-j7-2017/development/treble-project-treblue-j710x-t4098875), reboot your phone in to recovery so the recovery detects that the vendor partition is gone, and then restore your previously created backup.
Click to expand...
Click to collapse
Hello. Sorry for the long reply ahead. I have the same problem of wanting to use 64 bit apps in my J7 pro (SM-J30G/DS). It's my first time doing a custom rom as well and I followed all the instructions detailed here, but things did not go well for me.
The only step I missed is copying the backup to my laptop because for some reason my device is not letting it be copied. Nevertheless, I proceeded to install the custom rom since I was hoping to use the stock rom in sammobile.com instead as backup.
However, I keep getting both the error 7 and "failed to mount /preload (invalid argument)" when installing crdroid. I tried numerous ways to fix it but nothing happens. The following are what I have already tried:
- Install older versions of crdroid (all versions causes error 7)
- Remove assert in "updater-script" (tried it in 6.9 and 6.7 versions but still get error 7)
- Install latest versions of twrp (I cannot find the latest version of twrp for j7y17lte aside from what's here, so I went to other sites that offer twrp for J7 pro (2017). I found j7xelte and herolte but they don't work, so I used given twrp here again)
I can't fix the error and the install was always unsuccessful, so I decided to use another custom rom which is HavocOS. I followed the instructions but I still get the error 7 when installing project treblue. I tried removing assert again but the error is still there. I researched more but I can't find any more solutions to this problem or what's causing it.
One thing to note is that the create vendor zip was installed successfully (but with failed to mount/preload) and only the custom roms receive error 7. My research about error 7 said that it happens when the device is incompatible with the roms to be installed, but I'm pretty sure that my device is J730G/DS which should work fine since it worked with others here that have the same device. If my device was incompatible, then why does the twrp and create vendor work fine? Is it because my phone was not rooted? I saw that a lot of custom roms require root before installing, but it was not mentioned in the instructions so I did not root my phone.
Another problem is that I can't revert to my stock rom anymore. I found my stock rom in sammobile and proceeded to flash it using odin, but then my phone is stuck in samsung logo after rebooting. I tried leaving it for 8 hours to see if it will load but nothing happened. I can still access the recovery so I reinstalled twrp and would try to reinstall my stock rom.
Any help would be appreciated. Thank you!
EDIT: After reinstalling twrp, I tried flashing the create vendor and crdroid again and for some reason, the installation was now successful. But after rebooting to system, it was stuck in the crdroid logo. I then went to twrp again, formatted the data, then installed HavocOS and to my surprise, it was successful! There are no problems with boot and I am currently able to use the rom smoothly.
Problem is fixed since I am able to use 64 bit apps, but if you guys know what happened and what steps I did wrong, please tell me! I am still confused with what the problem is and I don't want to experience the same problem when I update my rom. Any help would be appreciated. Thank you very much!
I want to run 64 bit in J7 max G615F
does it work on nokia 2.3 which is binder64?