problem with install official rom - Galaxy Note 3 Q&A, Help & Troubleshooting

hi
i have SM-N9005 and i want to install official rom but when i install the rom odin fail
i try download 4 file but also fail and now i cant use the mobile it doesnt have rom ...what should i do ??

Total lack of information in your post .Plus total failure to search this question asked multiple times .
What firmware file .
What point does Odin fail ??

N9005XXUGBOK4_N9005XSAGBOK4_N9005XXUGBOK4_HOME.tar
odin at last point heddin file

i now istall twrp and work ... what can i do now ??

baraq.baraq said:
i now istall twrp and work ... what can i do now ??
Click to expand...
Click to collapse
put the rom zip file in external sd card, boot with hold up +home+power TWRP, AND SELECT INSTALL ZIP FROM SD CARD, and choose the local folder where you copy rom to your sd card.

myka_1997 said:
put the rom zip file in external sd card, boot with hold up +home+power TWRP, AND SELECT INSTALL ZIP FROM SD CARD, and choose the local folder where you copy rom to your sd card.
Click to expand...
Click to collapse
when i install the rom ..the phone stoped and restart

baraq.baraq said:
i now istall twrp and work ... what can i do now ??
Click to expand...
Click to collapse
TWRP cannot install official rom .
TWRP is for flashing custom rom Zips .
FAQS and GUIDES
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249

Related

installing custom rom on e16i w8

pls help me ive been searching 2 days for possible solution with my problem i cant use the gingerdx and etch. roms with [data,META-INF,system] inside theyre zip,I tried different roms but this is the only one works for me i downloaded XGin5.0 zip and it has XGin5.0 folder inside and i put the folder inside xrecover>backup in my sdcard and it installed!!!! pls guys help me i want to install latest roms :\
You have to install CWM recovery to flash GingerDX. Then you have to reboot to CWM and choose Install update ZIP from sd card, find GDX zip file and select it to flash it.
Sent from my X8 using XDA App
Godra said:
You have to install CWM recovery to flash GingerDX. Then you have to reboot to CWM and choose Install update ZIP from sd card, find GDX zip file and select it to flash it.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
how can i install CWM please sir guide me step by step i will be so thankful to u!
Use this to install CWM recovery and copy custom ROM zip file to sd card. After that reboot your phone and tap screen several times until it goes to CWM. Then go to Install update zip from sd card and find it. Press on it, it will ask you to confirm your choice and after flashing ROM do full wipe. Of course make NAND backup before.
my rom was xginv5.0 before now i sucessfully installed gingerdxv10 it gives me CWM then i try to install gingerdxv19 and its sucess to installed but my problem is from xgin5.0 to gingerdxv10 up to gingerdxv19 the interface of my phone doesnt change just the startup only change what is wrong?
Jdionisio said:
my rom was xginv5.0 before now i sucessfully installed gingerdxv10 it gives me CWM then i try to install gingerdxv19 and its sucess to installed but my problem is from xgin5.0 to gingerdxv10 up to gingerdxv19 the interface of my phone doesnt change just the startup only change what is wrong?
Click to expand...
Click to collapse
Try full wipe from CWM.
Sent from my X8 using XDA App
i already did full wipe from CWM and the phone interface doesnt really change pls tell me whats wrong with my phone

[Q] Not working install 2.3

I tried to install officical 2.3 to huawei u8800 and it say i need more space and yes i did it with my micro sd (2gb)
when i deleted images folder and i got blue screen?
can someone help me please!
katu2006 said:
I don't think your phone is bricked.
During the installation of the Stock Roms the recovery.img and boot.img files get replaced/modified and that's why your phone gets stuck at the Huawei logo.
Try the following:
Boot the phone in Bootloader (pink screen) by holding Vol+, Vol- and Power, format the partition with FAT32, create a folder called "image" and copy the following files on there.
EMMCBOOT - http://www.mediafire.com/?lb6ifvgk72iru4a
AMSS.MBN - http://www.mediafire.com/?d6r45q6p5gew59v
Recovery.img - http://www.mediafire.com/?57njygc8oianjac
Boot.img - http://www.mediafire.com/?6d5i0714a7o9z97
Once the files are copied, just disconnect the USB cable and remove the battery. Then boot into Recovery by pressing the Vol+ and Power. If you manage to get into CWM Recovery, then it's all good, you can install a custom Rom like Oxygen (
https://sourceforge.net/projects/u8800oxygen/files/ ) by selecting "install zip from SD Card" option.
You'll probably have to use the MOUNT functions within the Recovery to transfer the Oxygen.zip file to your root folder of the SD Card.
Click to expand...
Click to collapse
When you will have custom ROM installed you can try installing offcial 2.3 again (follow the guide that comes with the update and make sure it is for your phone (U8800/U8800pro))
yannn007 said:
When you will have custom ROM installed you can try installing offcial 2.3 again (follow the guide that comes with the update and make sure it is for your phone (U8800/U8800pro))
Click to expand...
Click to collapse
thx dude saved my life but how can i install official 2.3? can you show me some step or should i do the official 2.3 folder into zip? sorry for my bad english
Download the official 2.3.5 from here: http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDM2NDk=
Then format SD and create dload folder on the root of SD card. Then unzip the downloaded update and copy update.app in dload folder. Everything is also described in the pdf that is in the zip of the official ROM
If you find a mirror for the official beta2 version then you can also flash this (beta2 has unlocked bootloader while final has locked bootloader(pink screen))

[Q] Can I install a firmware through SD Card?

Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
rocky450 said:
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
Click to expand...
Click to collapse
http://www.mediafire.com/?x8hpnd1mxdv4j44
use ^ this link
then boot into cwm recovery
then given link is a recovery of DDLE1
restore it
u r done
stock firmware with out odin
HEY, PRESS THANKS I HELPED YOU
Many thanks for your help,I didn't find this file on the net.
One more question, Is this update deletes all the files (including SD card)? Also,do I need to make a backup using apps like Titanium backup?.
waiting your reply
no it cant delete the sd file
your data in phone- like apps,contact
all will erase
but nothing with sd card
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Did you used stock recovery or cwm you have to use cwm
Sent from my GT-S5360 using XDA
I have rom manager then I press reboot phone in cwm but it keeps running in stock recovery!
use cmw recovery and first clear your data
atleat your device having 120 mb free space or more......
cwm
use attachment
flash it in stock recovery
DONT SHY, JUST PRESS THANKS
CWM Restore!
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
NeelDroid said:
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
Click to expand...
Click to collapse
Followed these steps but it tells me "MD5 Mismatch!"
Ok installed the rom and everything is working fine (widgets,status bar,apps etc...) except my keyboard!! It is a firmware for samsung s5360 not a firmware for my Galaxy Y Pro b5510!
is there a specific rom for this phone?
thx for the help
helpppp
dont pass of Restoring data...
CAn i install firware from sd card if phone is bricked
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
arpitraj456 said:
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
Click to expand...
Click to collapse
if you can get into recovery mode you can either
1. restore a nandroid backup
2. format system data cache - mount system data cache - flash a custom rom zip
if you cant get into recovery mode then go into download mode and flash stock rom via odin (requires a pc)
phone is bricked !!Lol!
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
arpitraj456 said:
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
Click to expand...
Click to collapse
cant help you because this forum is for the galaxy y gt-s5360
I have no knowledge of your device - Goto your own phones forum if it has one or the xda question and answer section for non specific phones if it doesnt
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
NosHIRoU07 said:
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
Click to expand...
Click to collapse
What are you trying to install
Can you manually mount data in CWM?
Did you format data in CWM and then try to mount it?
Are you using the correct cwm?
Is it formatted in the correct file system for your kernel? Rfs/ext
please help me to upgrade firmware of lenovo tab a1000g from sd card
please help me to upgrade firmware of lenovo tab a1000g from sd card

[Q] formatted system by mistake,what to do now??

Hi guys need urgent help.
i updated to lollipop official rom and I formatted system with twrp by mistake.
i m able to boot into recovery.can i directly install any custom rom or official rom ,now that there is nothing in system??
Please reply or suggest if any other way to get a system installed on my phone.
YOU NEED TO FLASH A ROM OR A STOCK ROM FLASHABLE ZIP IF YOU NEED THE ZIP TO RECOVER YOU YUREKA I FOUND A LINK TO CM12.1 64bit DOWNLOAD AND FLASH THIS ROM LINK: http://forum.xda-developers.com/yur...-cyanogenmod-12-1-build-1-unofficial-t3086007 HIT THANKS IF I HELPED
first you download any rom from xda android development
remove your external sd card and connect it to the computer via micro sd adapter
copy the downloaded rom in to sd card
insert the sd card in to phone
reboot in to recovery
flash the rom instruction for flashing provided with all rom
you have rom now
thanks guys issue resolved.

Corrupt filesystem - only able to boot from external SD card

So I have a Samsung Galaxy J5 SM-J500F which suddenly refused to boot in any way (normal, recovery, download). I booted TWRP from external SD card but it shows Internal Storage (0 MB). Can't mount or do anything. Is there something to do or is it a hardware issue?
In Odin try to flash different versions of the stock firmware its the only way to restore it.
garylawwd said:
In Odin try to flash different versions of the stock firmware its the only way to restore it.
Click to expand...
Click to collapse
I can't. Everything that I am flashing through Odin goes into the external SD card. For the example, tried to flash TWRP and it flashed onto the external SD card. And I cannot go into download mode without the external SD card. Trying to remove it before pressing volume up to confirm makes Odin say no PIT file found and when I flash the PIT it gives error.
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
I can't. Everything that I am flashing through Odin goes into the external SD card. For the example, tried to flash TWRP and it flashed onto the external SD card. And I cannot go into download mode without the external SD card. Trying to remove it before pressing volume up to confirm makes Odin say no PIT file found and when I flash the PIT it gives error.
Click to expand...
Click to collapse
The only way to restore the phone is by flashing stock firmware in odin.
Twrp and everything else will go to the SD card only the stock firmware will flash to the phone.
Enter download mode WITH the SD card in and go through the steps on Odin to flash stock firmware and absolutely nothing else, no twrp, no custom firmware it has to be 100% pure stock rom or it will flash to the SD card and not internal storage.
Stock firmware contains the necessary PIT files and everything so don't try flashing different PIT files.
This is the only method to restore the device
garylawwd said:
The only way to restore the phone is by flashing stock firmware in odin.
Twrp and everything else will go to the SD card only the stock firmware will flash to the phone.
Enter download mode WITH the SD card in and go through the steps on Odin to flash stock firmware and absolutely nothing else, no twrp, no custom firmware it has to be 100% pure stock rom or it will flash to the SD card and not internal storage.
Stock firmware contains the necessary PIT files and everything so don't try flashing different PIT files.
This is the only method to restore the device
Click to expand...
Click to collapse
I understand, but for example if I have TWRP on SD card then I flash via Odin, it hangs at system.img.ext4 (left it over 15 hours). Before system it flashes recovery so I disconnected after 15 hours just to find out the SD card had the stock recovery.
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
I understand, but for example if I have TWRP on SD card then I flash via Odin, it hangs at system.img.ext4 (left it over 15 hours). Before system it flashes recovery so I disconnected after 15 hours just to find out the SD card had the stock recovery.
Click to expand...
Click to collapse
Dont put twrp on the SD card.
Boot into download and just flash stock.
Once the device is restored do what you want and install twrp and whatever you want but don't do it at the start.
You wont be able to restore unless everything is stock
garylawwd said:
Dont put twrp on the SD card.
Boot into download and just flash stock.
Once the device is restored do what you want and install twrp and whatever you want but don't do it at the start.
You wont be able to restore unless everything is stock
Click to expand...
Click to collapse
If I already have TWRP on the SD card should I reflash the unbrick.img?
Sent from my iPhone using Tapatalk
garylawwd said:
Dont put twrp on the SD card.
Boot into download and just flash stock.
Once the device is restored do what you want and install twrp and whatever you want but don't do it at the start.
You wont be able to restore unless everything is stock
Click to expand...
Click to collapse
Still doesn't work... It hangs at system.img.ext4
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
Still doesn't work... It hangs at system.img.ext4
Click to expand...
Click to collapse
What version you trying to flash?
Marshmallow or lollipop.
Try flashing the other one if it fails on one
garylawwd said:
What version you trying to flash?
Marshmallow or lollipop.
Try flashing the other one if it fails on one
Click to expand...
Click to collapse
Tried with both versions
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
Tried with both versions
Click to expand...
Click to collapse
Thats strange.
You're sure its not hardware related?
The only thing I can think of now is to try with different versions of the stock rom (different country firmware)
Like you came this far we must be able to fix it.
Im going to do a bit of reading about the issue now and see if there is anything you can try
garylawwd said:
Thats strange.
You're sure its not hardware related?
The only thing I can think of now is to try with different versions of the stock rom (different country firmware)
Like you came this far we must be able to fix it.
Im going to do a bit of reading about the issue now and see if there is anything you can try
Click to expand...
Click to collapse
I don't know. This is the story of how it got bricked:
Powered it on some days ago and it showed the Samsung logo with the "odin mode" text in the top-left corner. I thought I accidentally entered download mode so I held down volume down+power until the screen turned black. And after that it didn't boot at all until I managed to make this bootable SD card.
What I find strange is that Odin keeps flashing on my SD card instead of the internal storage. If I enter download mode then remove the SD card and try to flash via Odin it complains that no PIT partition was found. If I have TWRP installed on the SD card, download mode says "CURRENT BINARY: Custom" but as soon as I try to flash via Odin the official recovery.img (it flashes before it hangs at system.img.ext4) and restart the phone it says "CURRENT BINARY: Samsung Official". Also if I power it on from the SD card normally or in recovery it shows the blue screen that wants me to connect to Smart Switch but the app does not recognize the phone.
Another thing is that if I reboot into download mode with the SD card but only press power up to confirm after I remove the SD card the first thing to show in the top-left corner is "ddi: mmc_read_failed" and if I try to flash with Odin, Odin says no PIT partition found and the phone shows in the top-left corner the last line as "ODIN : flash read failure".
If I power it on without the SD card it doesn't do anything, not even vibrate.
Sent from my iPhone using Tapatalk
From TWRP recovery wipe everything until it shows no OS installed... Then flash any stock rom... Marshmallow will be nice as it is latest update
Rjt KD said:
From TWRP recovery wipe everything until it shows no OS installed... Then flash any stock rom... Marshmallow will be nice as it is latest update
Click to expand...
Click to collapse
I can't wipe because I can't mount the internal storage.
Sent from my iPhone using Tapatalk
Rjt KD said:
From TWRP recovery wipe everything until it shows no OS installed... Then flash any stock rom... Marshmallow will be nice as it is latest update
Click to expand...
Click to collapse
Wipe a bricked device? What? He already said his internal storage is showing 0MB so how is he supposed to wipe nothing?
garylawwd said:
Wipe a bricked device? What? He already said his internal storage is showing 0MB so how is he supposed to wipe nothing?
Click to expand...
Click to collapse
If he wipes boot img it will show no os installed... Then he can install another rom
Oh sorry first I didn't notice... I'm checking if i get something...can you please send us screenshots?!
Rjt KD said:
If he wipes boot img it will show no os installed... Then he can install another rom
Oh sorry first I didn't notice... I'm checking if i get something...can you please send us screenshots?!
Click to expand...
Click to collapse
The only screenshot I can send is TWRP (booted from SD card) showing Internal Storage (0 MB)
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
The only screenshot I can send is TWRP (booted from SD card) showing Internal Storage (0 MB)
Click to expand...
Click to collapse
Can you wipe or reset again using Samsung Smart Switch or Kies? Or maybe you can try to install new os from there... Meanwhile We will check something else to solve this
Rjt KD said:
Can you wipe or reset again using Samsung Smart Switch or Kies? Or maybe you can try to install new os from there... Meanwhile We will check something else to solve this
Click to expand...
Click to collapse
Tried that but it won't recognize the phone and the drivers are good
Sent from my iPhone using Tapatalk
tomadimitrie3 said:
Tried that but it won't recognize the phone and the drivers are good
Click to expand...
Click to collapse
Navigate to Wipe > Advance Wipe > Data, and choose Repair or Change File System.Press Repair File System to see if this fixes the issue. If not, continue.Press Change File System, choose Ext2, and swipe to confirm.Now switch back to Ext4 and swipe to confirm.Go back to TWRP main menu, then the Mount menu, and check if your partitions can be mounted now.
These actions r possible?

Categories

Resources