Database Users

HELP: Full Wipe >> But no flashable rom in phone >> How can I flash a rom now?

HELP: Full Wipe >> But no flashable rom in phone >> How can I flash a rom now?
Please guys, any help would be incredibly appreciated...
i ve kept my phone on the side for many weeks now and i had forgotten that i had erased all the flashable roms from the sd card. however i just performed a full wipe in order to flash the cm9 that i thought was still inside the sd card.
is there any way to flash any firmware or rom now?
:-( please help

If you can successfully boot to Clockworkmod, there is a way to mount usb storage so it can be seen while plugged into the computer.

c0rpse_grinder said:
Please guys, any help would be incredibly appreciated...
i ve kept my phone on the side for many weeks now and i had forgotten that i had erased all the flashable roms from the sd card. however i just performed a full wipe in order to flash the cm9 that i thought was still inside the sd card.
is there any way to flash any firmware or rom now?
:-( please help
Click to expand...
Click to collapse
Connect USB to PC, boot into recovery (CWM), Mounts and Storage, mount USB storage. Copy ROM to internal sd, flash away.

or u could get images and flash them via fastboot

[Q] Can I install a firmware through SD Card?

Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss

rocky450 said:
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
Click to expand...
Click to collapse
http://www.mediafire.com/?x8hpnd1mxdv4j44
use ^ this link
then boot into cwm recovery
then given link is a recovery of DDLE1
restore it
u r done
stock firmware with out odin
HEY, PRESS THANKS I HELPED YOU

Many thanks for your help,I didn't find this file on the net.
One more question, Is this update deletes all the files (including SD card)? Also,do I need to make a backup using apps like Titanium backup?.
waiting your reply

no it cant delete the sd file
your data in phone- like apps,contact
all will erase
but nothing with sd card

there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet

rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Did you used stock recovery or cwm you have to use cwm
Sent from my GT-S5360 using XDA

I have rom manager then I press reboot phone in cwm but it keeps running in stock recovery!

use cmw recovery and first clear your data
atleat your device having 120 mb free space or more......

cwm
use attachment
flash it in stock recovery
DONT SHY, JUST PRESS THANKS

CWM Restore!
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!

NeelDroid said:
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
Click to expand...
Click to collapse
Followed these steps but it tells me "MD5 Mismatch!"

Ok installed the rom and everything is working fine (widgets,status bar,apps etc...) except my keyboard!! It is a firmware for samsung s5360 not a firmware for my Galaxy Y Pro b5510!
is there a specific rom for this phone?
thx for the help

helpppp
dont pass of Restoring data...

CAn i install firware from sd card if phone is bricked
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...

arpitraj456 said:
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
Click to expand...
Click to collapse
if you can get into recovery mode you can either
1. restore a nandroid backup
2. format system data cache - mount system data cache - flash a custom rom zip
if you cant get into recovery mode then go into download mode and flash stock rom via odin (requires a pc)

phone is bricked !!Lol!
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...

arpitraj456 said:
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
Click to expand...
Click to collapse
cant help you because this forum is for the galaxy y gt-s5360
I have no knowledge of your device - Goto your own phones forum if it has one or the xda question and answer section for non specific phones if it doesnt

my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help

NosHIRoU07 said:
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
Click to expand...
Click to collapse
What are you trying to install
Can you manually mount data in CWM?
Did you format data in CWM and then try to mount it?
Are you using the correct cwm?
Is it formatted in the correct file system for your kernel? Rfs/ext

please help me to upgrade firmware of lenovo tab a1000g from sd card
please help me to upgrade firmware of lenovo tab a1000g from sd card

[Q] Problems on GT-i9505

Dear all,
I need your help on solving a problem I am having on my GT-i9505.
Yesterday I have tried to root the device with CF-Auto-Root-jflte-jfltexx-gti9505, and it worked fine until I noticed that it was somehow very slow on phone start.
This slowdown problem was not caused by the root process because I have noticed it even before the root process.
In order to try to solve it, I have installed the CWF i9505-cwm-recovery-6.0.3.2-4, and made a backup of the system before make a full system restore (wipe data/factory reset) via CWF.
After that, the system did not started and stays on a boot loop.
Accessed the CWF again and restored the backup, but the problem remains.
After all this process, I get totally lost and tried several solutions and none of them worked.
At this moment I can only access "download mode" and CWM based recovery.
Since I am already lost, and really do not know where to go next, I ask you help on how can I solve this problem and have the phone working again.
The only data I have about the phone:
MODEL: GT-I9505
I9505XXUEMJ5 / I9505ZWAXST
I know this is an international model.
I think on downloading the stock firmware from samsung (4.2.2 or 4.3) no not know which one is advisable, but before that I really need to know if there any additional solution because I don´t even know if this will solve the problem.
Another problem is the hotfile hosting, since I connection is very unstable and will take some time to download the file.
Anyone can help me please?
Thank you in advance
Best regards
Paulo Matos

Since you already have CWM installed you may aswell download a new rom and copy it an SD card. install from recovery.

symondo12 said:
Since you already have CWM installed you may aswell download a new rom and copy it an SD card. install from recovery.
Click to expand...
Click to collapse
Thank you simondo12.
Do you mean, download a stock firmware from samsung for this especific model and install it from sd card?
If not, what file do you advise for my model?
Since I am unable to access the phone via android, I have tried to access the sd card from CWF. What I noticed:
- I can access the external sd card from the pc, but I cannot access the internal sd card from the pc.
- I cannot access the external sd card directly from CWF (perhaps because of it's size since it´s a 64GB), but I have access to internal sd card
Even if I copy the file to the external sd card, I will be unable to install it from CWF because I have no access to the external sd card (error on mounting external sd card). Is it the size of it?
I am trying to download the new firmware (4.3) from samsung for my model and will try to install via odin. Will I require to install the attachment that says "kernel file"? This process will take lots of time because I have an unstable internet connection for downloading via hotfile and uploaded file servers.
The problem is that I do not know if it will work because the phone is rooted and have cwf installed.
Thank you very much
Paulo

since its a 64GB have formatted it in exfat? if so then CWM may not recognize it. I would try installing Philz recovery if you are using standard CWM see if it will recognise the card. Do you have another SD card you could try?
There's not really much point in flashing a new firmware in odin if you have cwm installed. Just copy custom rom over to an SD card.

symondo12 said:
since its a 64GB have formatted it in exfat? if so then CWM may not recognize it. I would try installing Philz recovery if you are using standard CWM see if it will recognise the card. Do you have another SD card you could try?
There's not really much point in flashing a new firmware in odin if you have cwm installed. Just copy custom rom over to an SD card.
Click to expand...
Click to collapse
Hi symondo12,
Thank you once again.
I have alredy found the Philz thread and found a gt-i9505 version and instructions to install both from sd and from odin.
I will try and see what happens.
Regardless the custom rom, since my galaxy s4 was on 4.3, will I be abble to downgrade? Ask you that because I do not know if there is a custom rom for gt-i9505 on android 4.3.
If not, just need to copy the stock rom to sdcard and install it the same way as a custom rom?
Thank you very much for your time
Regards
Paulo

symondo12 said:
since its a 64GB have formatted it in exfat? if so then CWM may not recognize it. I would try installing Philz recovery if you are using standard CWM see if it will recognise the card. Do you have another SD card you could try?
There's not really much point in flashing a new firmware in odin if you have cwm installed. Just copy custom rom over to an SD card.
Click to expand...
Click to collapse
Dear symondo12,
I have changed the sd card to a 2GB sd card and CWF now recognizes it.
I will see if I can download the stock firmware from samsung and see if I can install it and solve my problem.
Additionally I found a "Pure-Google-pre-rooted-4.3-v2.3"... hope it works.
Thank you once again
Paulo

problem with install official rom

hi
i have SM-N9005 and i want to install official rom but when i install the rom odin fail
i try download 4 file but also fail and now i cant use the mobile it doesnt have rom ...what should i do ??

Total lack of information in your post .Plus total failure to search this question asked multiple times .
What firmware file .
What point does Odin fail ??

N9005XXUGBOK4_N9005XSAGBOK4_N9005XXUGBOK4_HOME.tar
odin at last point heddin file

i now istall twrp and work ... what can i do now ??

baraq.baraq said:
i now istall twrp and work ... what can i do now ??
Click to expand...
Click to collapse
put the rom zip file in external sd card, boot with hold up +home+power TWRP, AND SELECT INSTALL ZIP FROM SD CARD, and choose the local folder where you copy rom to your sd card.

myka_1997 said:
put the rom zip file in external sd card, boot with hold up +home+power TWRP, AND SELECT INSTALL ZIP FROM SD CARD, and choose the local folder where you copy rom to your sd card.
Click to expand...
Click to collapse
when i install the rom ..the phone stoped and restart

baraq.baraq said:
i now istall twrp and work ... what can i do now ??
Click to expand...
Click to collapse
TWRP cannot install official rom .
TWRP is for flashing custom rom Zips .
FAQS and GUIDES
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249

[Q][Lumia 525]CWM recovery sdcard problem!

Hey guys,
I am having a problem that I was installing android 6.0.1 on lumia 525. Everything was going right till TWRP recovery when I tried to flash the Rom it said error 7 then I installed Cwm recovery but there is no option to install files from external sdcard I can only install zips from internal storage and as it is not running any OS I can't move any file to internal storage. I don't have the windows 8 backup now. Someone who can help me out.
Thano you
Manage Harsana