Trying to flash this device with Z3X but i can't flash any partition when i try to flash its always gives timeout error at any partition... there is a screenshot at end of topic to explain better...
SCREENSHOT
i tried to flash all unchecked partitions before, all of them failed ( same error as picture... ) i tried 1 combination and 3 different country firmwares all of them are same as other can anyone help me ?
Can u please give me the link of z3x
Jaqen Hghar said:
Trying to flash this device with Z3X but i can't flash any partition when i try to flash its always gives timeout error at any partition... there is a screenshot at end of topic to explain better...
SCREENSHOT
i tried to flash all unchecked partitions before, all of them failed ( same error as picture... ) i tried 1 combination and 3 different country firmwares all of them are same as other can anyone help me ?
Click to expand...
Click to collapse
Use Odin perhaps
Related
am on the KK boot-loader ... flashing back to jb is not possible that i know but am in strange case .. am not able to flash anything .. it just failed by saying Complete(Write) operation failed. nothing is flashable ,, not even the PIT File , i flash the philz recovery and it flash by same dialogue . but some how it was flashed and i can access the recovery ..
now i format everything .. clean wipe ..
and try to flash the CM11 , after flashing it stuck on boot loop i try the fix by searching lots threads but same ... and when ever i boot into revery it says recovery is not seandroid , if i manage to off the device it says kernel is not seandroid enforcing ser warrenty bit : kernel ..
dont know what is going on
THere is no option to go back to stock for me as i tried every possible solution provided on XDA but all failed ..
So guyz if you can help me , i will be greatfull ,,am sleepless since 3 dayz..
lovegurulavdev said:
am on the KK boot-loader ... flashing back to jb is not possible that i know but am in strange case .. am not able to flash anything .. it just failed by saying Complete(Write) operation failed. nothing is flashable ,, not even the PIT File , i flash the philz recovery and it flash by same dialogue . but some how it was flashed and i can access the recovery ..
now i format everything .. clean wipe ..
and try to flash the CM11 , after flashing it stuck on boot loop i try the fix by searching lots threads but same ... and when ever i boot into revery it says recovery is not seandroid , if i manage to off the device it says kernel is not seandroid enforcing ser warrenty bit : kernel ..
dont know what is going on
THere is no option to go back to stock for me as i tried every possible solution provided on XDA but all failed ..
So guyz if you can help me , i will be greatfull ,,am sleepless since 3 dayz..
Click to expand...
Click to collapse
Show us your entire window as a screenshot, then we could try to eliminate possibilities. Text is very ambiguous.
nicholaschum said:
Show us your entire window as a screenshot, then we could try to eliminate possibilities. Text is very ambiguous.
Click to expand...
Click to collapse
Solved .. It ****ing due to the Vmware on my mac..
Hi Guys,
I have a problem here. I flashed a custom ROM on my note 3 yesterday ( Euphoria ). Anyway now I am having some trouble ( after rebooting the phone ). It will consistently move into the error state :
" Firmware encountered a problem.... etc "
I can boot into download mode, and I attempted via Odin to flash a recovery file ( TWRP,PhilZ,CWM etc ), but it keeps failing. I figured then to download the stock firmware, but I am not quite sure which region the phone is on. Can I download any stock SM-N9005 firmware and try to apply it ? I did try to flash a HK stock firmware, but I got this error "
" aboot.mbn
FAIL (AUTH "
On the phone I get :
SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1
I believe this relates to the firmware ? But I am unsure which firmware file to use as I am unsure of the phones original region.
What else could I do from here ?
vira4783 said:
Hi Guys,
I have a problem here. I flashed a custom ROM on my note 3 yesterday ( Euphoria ). Anyway now I am having some trouble ( after rebooting the phone ). It will consistently move into the error state :
" Firmware encountered a problem.... etc "
I can boot into download mode, and I attempted via Odin to flash a recovery file ( TWRP,PhilZ,CWM etc ), but it keeps failing. I figured then to download the stock firmware, but I am not quite sure which region the phone is on. Can I download any stock SM-N9005 firmware and try to apply it ? I did try to flash a HK stock firmware, but I got this error "
" aboot.mbn
FAIL (AUTH "
On the phone I get :
SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1
I believe this relates to the firmware ? But I am unsure which firmware file to use as I am unsure of the phones original region.
What else could I do from here ?
Click to expand...
Click to collapse
Try any rom if your phone is not hg. Try plan or German.
kenny1991 said:
Try any rom if your phone is not hg. Try plan or German.
Click to expand...
Click to collapse
Well I downloaded a Poland firmware and I keep getting an error relating to the system.image.ext4.
Tried various PIT files but still no luck
Hi today I updated my cellphone marshmallow and gave me this error "dm-verity verification failed/need to check drk first "
my device had a modified kernel and it's sm g928t, it was unlock I'm from mexico I don't find any solution about this model, could somebody can help me, and I'm sorry my english is not good enogh but i was trying to explan my trouble I hope somebody can help me I´m desesperated
sorry bro in the same path however mine is the G928A and it really doesnt have a solution. for you just need to flash a custom Kernel.
go here:
https://twrp.me/devices/samsunggalaxys6edgeplus.html
and download the one for the tmobile
flash it with odin.
There is a solution.
Heres one way that worked for me:
Get stock bl ap cp csc and pit file in odin, check repartition and nand erase. Flash and it should be good. Had this exact same issue
Hey guys ,
I accidentally done an Full format via TWPR before i could make a Backup of the EFS folder...
Obviously i dont have an IMEI now and cant use Mobile services ...
I Tryed Flashing the newest stock rom again and got the error:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE:4 BINARY:3
so uhm ... that wont work at all
I saw some tutorials with an Combination Rom flash but i will still got the BL error and nothing happens..
Are there any ways to Recover my phone?
Could i use the EFS's files of my old A5 2016 SM-510F?
Hitaku said:
Hey guys ,
I accidentally done an Full format via TWPR before i could make a Backup of the EFS folder...
Obviously i dont have an IMEI now and cant use Mobile services ...
I Tryed Flashing the newest stock rom again and got the error:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE:4 BINARY:3
so uhm ... that wont work at all
I saw some tutorials with an Combination Rom flash but i will still got the BL error and nothing happens..
Are there any ways to Recover my phone?
Could i use the EFS's files of my old A5 2016 SM-510F?
Click to expand...
Click to collapse
Device 4 Binary 3 means you are flashing older firmware than what is currently on your phone. You will need to get latest firmware with bootloader 4.
Bootloader version number is the 5th number from the right of the firmware name. The same error will happen if you use combination firmware as well.
spawnlives said:
Device 4 Binary 3 means you are flashing older firmware than what is currently on your phone. You will need to get latest firmware with bootloader 4.
Bootloader version number is the 5th number from the right of the firmware name. The same error will happen if you use combination firmware as well.
Click to expand...
Click to collapse
Hey
so the
G950FXXU4CRI5/G950FOXM4CRI5/G950FXXU4CRI1/G950FXXU4CRI5 firmware should technically work?
Hitaku said:
Hey
so the
G950FXXU4CRI5/G950FOXM4CRI5/G950FXXU4CRI1/G950FXXU4CRI5 firmware should technically work?
Click to expand...
Click to collapse
Yes it should as it is the latest firmware available.
Hitaku said:
Hey guys ,
I accidentally done an Full format via TWPR before i could make a Backup of the EFS folder...
Obviously i dont have an IMEI now and cant use Mobile services ...
I Tryed Flashing the newest stock rom again and got the error:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE:4 BINARY:3
so uhm ... that wont work at all
I saw some tutorials with an Combination Rom flash but i will still got the BL error and nothing happens..
Are there any ways to Recover my phone?
Could i use the EFS's files of my old A5 2016 SM-510F?
Click to expand...
Click to collapse
Did you manage to fix the problem? I have an S7 with a deleted EFS partition and can't use mobile services either
sirs2k said:
Did you manage to fix the problem? I have an S7 with a deleted EFS partition and can't use mobile services either
Click to expand...
Click to collapse
Same.. i have an A520F/DS, deleted EFS, no mobile services and null imei..any ideas on how to solve this?
I have a problem sm-g950f- u12 saying fail to open recovery cause(no such fail or directory)#
#reboot recovery cause is unknown#
Support single-sku
File-based ota
E: failed to mount/efs: invalid argument
Supported API:3
E:failed to mount/efs invalid argument
E: unknown volume for path[/odm]
E: unknown volume for path [/vendor]
Dm-verity verification failed....
E:[libfs_mgr]is_dt_compatible please anyone to help me
I have a problem sm-g950f- u12 saying fail to open recovery cause(no such fail or directory)#
#reboot recovery cause is unknown#
Support single-sku
File-based ota
E: failed to mount/efs: invalid argument
Supported API:3
E:failed to mount/efs invalid argument
E: unknown volume for path[/odm]
E: unknown volume for path [/vendor]
Dm-verity verification failed....
E:[libfs_mgr]is_dt_compatible please anyone to help me
Hello everyone,
I have a N9005 that only goes into download mode. It doesn't go into recovery mode. When I try to put it in recovery mode, just vibrates, the screen is black and continues to restart itself, vibrating.
If I try to turn it on normaly, Samsung Galaxy Note 3 N9005 logo comes on, stayes like this for 30, seconds, restarts, vibrates twice and keeps on doing this on and on
If I take it to download mode and try to flash a new rom, Odin tells me that there is no PIT partition. I even added the PIT file, but the same, no luck
When I try to flash a rom, on the download mode screen give me different red messages
UDC START-red color
MMC reading error
I even tryed to do emergency recovery with keys, but no luck as well
Any advice?
Regards!
Install Firmware from Sammobile...
albrecht1977 said:
Install Firmware from Sammobile...
Click to expand...
Click to collapse
I will let you know how it works/if it works
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
Yes, I am flashing the correct firmware from sammobile.
It is tar.md5
Now the phone shows me ODIN: flash read failure.
What can I do in this situation? If it is as you wrote, damaged Nand?
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
When I try to flaah the TWRP recovery, "there is no PIT partition"
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
JJEgan said:
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
Click to expand...
Click to collapse
Do you have any ideea where I can find the 4 part firmware?
Thanks
Sammobile /updato/samsung -updates. Alldot comms
Search this forum search google.
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
audit13 said:
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
Click to expand...
Click to collapse
Hey guys. Did anyone ever find the solution for this? I have the exact same problem like as in literally exactly. And I've tried the 4part repair firmware, with the pit, as wel as the combination firmware as well as the stock firmware and even tried cf auto root, boot images, twrp flashes.. Nothing! Just also keeps giving the pit error.
Reads as NAND fail , if you have followed all the advice .