Related
Hello guys. I'm new to XDA and I'm really tensed about my new s6 edge plus. I got it out of the box, booted it up and everything was working fine until it ran out of battery and shut down. I tried booting it up but it's stuck on the boot screen with an error 'custom binary blocked by frp lock'. I'm able to access the download and the recovery mode but I don't know what to do with it. I did my homework but I don't know how to odin flash or odin reset my device. Please help me out with this guys as i'm using my stupid iPhone to write this right now and I just wanted to switch over to android. Really worried. Looking forward for a reply. Also the model is asian, SM-G928C
Cheers.
you can get into recovery? just full wipe? but I'm having the same problem here but I can't get to recovery. also tried to flash stock firmware and that failed at hidden.img flash. so now I don't even get the "custum binary bloked bij frp lock" error. Im stuck in download mode. but nothing won't flash!! pls if you find a solution.......let me know!!! i'm about to cry!!
liobeir said:
you can get into recovery? just full wipe? but I'm having the same problem here but I can't get to recovery. also tried to flash stock firmware and that failed at hidden.img flash. so now I don't even get the "custum binary bloked bij frp lock" error. Im stuck in download mode. but nothing won't flash!! pls if you find a solution.......let me know!!! i'm about to cry!!
Click to expand...
Click to collapse
Join the PIT file
flash
u r problem
The bodhi said:
Join the PIT file
flash
u r problem
Click to expand...
Click to collapse
Fixt it, flashed the stockfirmware, reboot my phone in download mode and then flashed the Hidden.img.tar...
Thanks!!
S6 edge plus
That's good! Did you get the stock firmware from Sammobile for your model? And you odin flashed it right? And also, do you why this locked in the first place? And how to prevent it in future?
liobeir said:
Fixt it, flashed the stockfirmware, reboot my phone in download mode and then flashed the Hidden.img.tar...
Thanks!![/QUOT]
Where you get hidden.img mate?
Click to expand...
Click to collapse
hey guys im sorry if i post this on the wrong section but i followed this tutorial: droidviews(dot)com/root-galaxy-s6-and-s6-edge-on-android-6-0-1-marshmallow-update/ to root my s6 edge+ and it went black... after some research i found out the tutorial wasnt for my device(SM-G2928F) so i flashed it with cf-autoroot and then it boot looped for like an hour. I downloaded the original greek firmware from sammobile but it brings me up this error: SECURE CHECK FAIL : (BOOTLOADER).. any help?
UPDATE: changed the port and run Odin as admin now it says: SECURE CHECK FAIL : (RADIO) Odin log: pastebin(dot)com/4w1943HF
UPDATE: now when I exit recovery mode it doesnt start and tells me: An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.(I can still go into recovery mode)
Let me check you have flashed a firmware not for your device with odin or just a zip? First I would try flashing the most recent firmware you can find for your device with odin, some bootloaders can't be downgraded. If that doesn't work then the emergency firmware recovery will work, I've used kies emergency firmware a few times.
Hopefully someone with your device will point you in the right direction if you are stuck
I flashed a firmware not for my device but I found a solution on another XDA post thank you
I own a Samsung Galaxy A9
I tried to update the firmware from the original lollypop to (maybe) marshmallow
I failed to update using the software, so i updated using smart switch
It went wrong, the update failed.
Now the blue screen with "An error has occured while updating the device software. Use the emergency recvery function in the Smart Switch PC software" appears..
I tried the emergency recovery but it also failed
The only button combination that worked is the power button + volume down --> It restarted, but the same screen appears
I even tried refresing the software with Odin, but it failed.
The phone says "FRP is enabled, not allow download non-FRP aboot binary"
Odin doesn't work
The samsung customer service in singapore (my country) is not able to help. Would really appreciate it if somebody could help me with this.
-Michael
Are you able to get into bootloader ? If so, you can try using ADB to remove OEM Unlock.. There should be bootloader unlock instructions for Samsung in these forums..
Sent from my SM-A9000 using XDA-Developers mobile app
I take it you tried to update via odin originally.
If you give more details if what part of the flashing process failed we may be able to help.
Was it a particular partition that failed to flash.
A screenshot of the failed flashing process with odin would be helpful.
Also you may be able to remove the blue error screen by flashing the stock recovery with odin.
Extract it from the stock firmware, convert it to a tar archive then flash it with Odin.
Boot to recovery and wipe cache.
That itself may get you booting.
There is also Twrp available for your device which could do the same thing.
I had the same issue.. i fixed it yesterday.. what i did was.. go to developer options.. enable OEM unlock.. download CROM from galaxy apps store.. it gives a warning msg regarding unlocking the device.. that isnt an issue..just press ok.. and it will say ur device is unlocked.. and then try reflashing firmware from ODIN.. and then i did root my A9 and its working pretty nice since yesterday..
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:53 PM ---------- Previous post was at 09:51 PM ----------
and also.. if u try to update to marshmallow.. u may get errors.. i assume thats because that is an update from CHINA..NOT from HONGKONG.. i suggest everyone to wait untill hongkong version of Marshmallow is released.. even i flashed marshmallow..had some error and my device was not booting and just booting into recovery with some error like drm something like that.. and then i flashed a hongkong lollipop 5.1.1 version and then my device booted..
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
regarding the FRP locking system. do one thing.. first back up everything.. go to backup and reset option.. do a factory reset.. it will wipe everything so do make sure u backup everything.. it will reboot the device into recovery.. do full factory reset.. reboot again.. finish.. i did this.. FRP LOCK is gone.. am happy
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
do all the steps as i said.. Insha Allah all your problems and errors will be solved..
Sent from my SM-A9000 using XDA-Developers mobile app
Mikekaipas said:
I own a Samsung Galaxy A9
I tried to update the firmware from the original lollypop to (maybe) marshmallow
I failed to update using the software, so i updated using smart switch
It went wrong, the update failed.
Now the blue screen with "An error has occured while updating the device software. Use the emergency recvery function in the Smart Switch PC software" appears..
I tried the emergency recovery but it also failed
The only button combination that worked is the power button + volume down --> It restarted, but the same screen appears
I even tried refresing the software with Odin, but it failed.
The phone says "FRP is enabled, not allow download non-FRP aboot binary"
Odin doesn't work
The samsung customer service in singapore (my country) is not able to help. Would really appreciate it if somebody could help me with this.
-Michael
Click to expand...
Click to collapse
Pls help me, i bought samsung galaxy A9 SM-A9000 Hong Kong version in singapore. My phone got firmware update error, i try to flash all A9 firmware with odin but still got problem and showing volume size is too big 7372800 < 7979008 , odin: invalid ext4 image. I try to flash with china firmware also. But frp not allowed. Pls help me what should i do. my phone can do downloading mode only. i can't do recovery mode and i don't have back up. Any idea to help me, pls.
mriyaan said:
I had the same issue.. i fixed it yesterday.. what i did was.. go to developer options.. enable OEM unlock.. download CROM from galaxy apps store.. it gives a warning msg regarding unlocking the device.. that isnt an issue..just press ok.. and it will say ur device is unlocked.. and then try reflashing firmware from ODIN.. and then i did root my A9 and its working pretty nice since yesterday..
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:53 PM ---------- Previous post was at 09:51 PM ----------
and also.. if u try to update to marshmallow.. u may get errors.. i assume thats because that is an update from CHINA..NOT from HONGKONG.. i suggest everyone to wait untill hongkong version of Marshmallow is released.. even i flashed marshmallow..had some error and my device was not booting and just booting into recovery with some error like drm something like that.. and then i flashed a hongkong lollipop 5.1.1 version and then my device booted..
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
regarding the FRP locking system. do one thing.. first back up everything.. go to backup and reset option.. do a factory reset.. it will wipe everything so do make sure u backup everything.. it will reboot the device into recovery.. do full factory reset.. reboot again.. finish.. i did this.. FRP LOCK is gone.. am happy
Sent from my SM-A9000 using XDA-Developers mobile app
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
do all the steps as i said.. Insha Allah all your problems and errors will be solved..
Sent from my SM-A9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have the exact same problem as michael's... The problem is that we cannot enter the ROM at all... It only stuck at either the blue screen, or the odin mode screen. So we cannot disable neither FRP or Oem unlock...
Well in my chase i think the Crom service is already unlocked, but still... When trying to flash with :
China marshmallow : odin process failed even from the beginning (aboot.mbn <-- bootloader)
Hongkong lolipop : odin process failed during system ext4, saying it's too large
---------- Post added at 05:31 AM ---------- Previous post was at 05:30 AM ----------
ashyx said:
I take it you tried to update via odin originally.
If you give more details if what part of the flashing process failed we may be able to help.
Was it a particular partition that failed to flash.
A screenshot of the failed flashing process with odin would be helpful.
Also you may be able to remove the blue error screen by flashing the stock recovery with odin.
Extract it from the stock firmware, convert it to a tar archive then flash it with Odin.
Boot to recovery and wipe cache.
That itself may get you booting.
There is also Twrp available for your device which could do the same thing.
Click to expand...
Click to collapse
When trying to flash with :
China marshmallow : odin process failed even from the beginning (aboot.mbn <-- bootloader)
Hongkong lolipop : odin process failed during system ext4, saying it's too large
Is the TWRP for A9 available? I cant find any.
and remember this.. DO NOT FLASH CHINA MARSHMALLOW AS OF NOW.. it creates a problem.. FLASH ONLY HONGKONG FIRMWARE using the latest odin..
---------- Post added at 10:42 AM ---------- Previous post was at 10:41 AM ----------
y do u need twrp? just flash via odin and its done..
Sent from my SM-A9000 using XDA-Developers mobile app
If odin won't flash and the bootloader is complaining about frp lock.
Then the firmware isn't meant for that device.
If it fails at aboot then it's likely nothing got flashed.
To remove the firmware error warning it's usually enough to flash the stock recovery or twrp with odin.
The stock recovery image can be pulled from the stock firmware and converted to tar with 7-zip then flashed with odin.
Note: twrp wont flash while frp lock is active.
ashyx said:
If odin won't flash and the bootloader is complaining about frp lock.
Then the firmware isn't meant for that device.
If it fails at aboot then it's likely nothing got flashed.
To remove the firmware error warning it's usually enough to flash the stock recovery or twrp with odin.
The stock recovery image can be pulled from the stock firmware and converted to tar with 7-zip then flashed with odin.
Note: twrp wont flash while frp lock is active.
Click to expand...
Click to collapse
"The stock recovery image can be pulled from the stock firmware and converted to tar with 7-zip then flashed with odin."
Which file do you mean by stock recovery image, and how to flash it with odin. I mean like which file should be converted to tar and should i put it into AP slot and then start odin like usual? thanks
jmarcus.w said:
"The stock recovery image can be pulled from the stock firmware and converted to tar with 7-zip then flashed with odin."
Which file do you mean by stock recovery image, and how to flash it with odin. I mean like which file should be converted to tar and should i put it into AP slot and then start odin like usual? thanks
Click to expand...
Click to collapse
Open the md5 firmware archive with 7zip and pull out recovery.img.
Use 7-zip to create a tar archive then flash with odin in AP slot.
ashyx said:
Open the md5 firmware archive with 7zip and pull out recovery.img.
Use 7-zip to create a tar archive then flash with odin in AP slot.
Click to expand...
Click to collapse
First of all thanks for this..
I tried this and able to access the recovery screen..
But still flashing the stock ROM after wipe/factory reset fail.
I found several problems in the recovery screen:
There is "dm-verity verification failed" error
and there is problem about mounting to /system and formating /sbfs thing..
When I tried flashing.. the problem is also always on the same point.. On the system.img.ext4 it failed, saying volume is too large, ODIN : invalid ext4... <-- Always this failure
I dont understand any of this.
jmarcus.w said:
First of all thanks for this..
I tried this and able to access the recovery screen..
But still flashing the stock ROM after wipe/factory reset fail.
I found several problems in the recovery screen:
There is "dm-verity verification failed" error
and there is problem about mounting to /system and formating /sbfs thing..
When I tried flashing.. the problem is also always on the same point.. On the system.img.ext4 it failed, saying volume is too large, ODIN : invalid ext4... <-- Always this failure
I dont understand any of this.
Click to expand...
Click to collapse
As previously stated the firmware is not intended for your device this is why you are seeing these issues.
Hi,
I have removed the blue screen, i tried flashing the stockrom after wipe/factory reset failed. I found several problems in the recovery screen. There is "dm-verity verification failed" error and error during wiping, there is a problem about mounting to / system and formatting/ sbfsthing. i don't understand any of this jargon.
Hope i can get some help for this, please.
Thanks
Mikekaipas said:
I own a Samsung Galaxy A9
I tried to update the firmware from the original lollypop to (maybe) marshmallow
I failed to update using the software, so i updated using smart switch
It went wrong, the update failed.
Now the blue screen with "An error has occured while updating the device software. Use the emergency recvery function in the Smart Switch PC software" appears..
I tried the emergency recovery but it also failed
The only button combination that worked is the power button + volume down --> It restarted, but the same screen appears
I even tried refresing the software with Odin, but it failed.
The phone says "FRP is enabled, not allow download non-FRP aboot binary"
Odin doesn't work
The samsung customer service in singapore (my country) is not able to help. Would really appreciate it if somebody could help me with this.
-Michael
Click to expand...
Click to collapse
Mikekaipas said:
Hi,
I have removed the blue screen, i tried flashing the stockrom after wipe/factory reset failed. I found several problems in the recovery screen. There is "dm-verity verification failed" error and error during wiping, there is a problem about mounting to / system and formatting/ sbfsthing. i don't understand any of this jargon.
Hope i can get some help for this, please.
Thanks
Click to expand...
Click to collapse
Don't worry about /sbfs other Samsung devices get the same warning.
Dm-verity is usually due to a modified system partition or just the wrong firmware.
Wipe issue is likely because of frp lock.
Thanks Ashyx.
Right now when i try turning on my phone, my phone just keeps restarting and the typical welcome screen appears. Nothing further happens.
ashyx said:
Don't worry about /sbfs other Samsung devices get the same warning.
Dm-verity is usually due to a modified system partition or just the wrong firmware.
Wipe issue is likely because of frp lock.
Click to expand...
Click to collapse
Mikekaipas said:
Thanks Ashyx.
Right now when i try turning on my phone, my phone just keeps restarting and the typical welcome screen appears. Nothing further happens.
Click to expand...
Click to collapse
Thanks and my phone also got same issue with mikekaipas
Hi, so anyone out there with any suggestions to remedy the situation? Or will i just have to give up on my phone?
Mikekaipas said:
Hi, so anyone out there with any suggestions to remedy the situation? Or will i just have to give up on my phone?
Click to expand...
Click to collapse
i also already tired to try on my phone; should i buy new A9?
Hi all
I want to flash odin a9000 hong kong version, and I am afraid of this looking this thread
I am on latest hong kong rom 5.1.1., unlocked bootloade by crom , rooted, twrp installed...
So, do I need to afraid of this @steberg @ashyx and other advanced users
thanks
Man... Oh maaaan.....
I have also got this problem with SM-A9000.
via smart switch my firmware detected as china built (BPE2). but the emergency recovery always failed at 100%
then i try ODIN, with china firmware ( i try with the newest & even the oldest & i have tried with both full AP instalation & the single instalation BL, AP, CP, CSC) the result:
"FRP is enabled, not allow download non-FRP aboot binary"
with PIT & Re-partition also fail. only add result:
"FRP is enabled, ignore PIT download"
when i try with HK firmware (either newest & all other) it's better while the full instalation fail.
the single instalation made it for BL, CP & CSC and i got into the boot loop which show black screen
and SAMSUNG GALAXY A9(6) logo and i can access recovery.
But AP instalation always fail ( i have tried PIT also), the screen said
"FRP is enabled, ignore PIT download"
"Volume Size is too big 7372800 < 7979008"
"ODIN : Invalid id ext4 image"
my question? is it really wrong firmware? because the BL, CP & CSC can be installed except the AP because of the system.img.ext4.
because with the China Firmware,none can be installed.
also in my recovery there log:
"dm-verity verification failed
E: failed to mount / system (Invalid argument)"
i tried to install TWRP, but still fail,its said:
"FRP is enabled, not allow download non-FRP aboot binary"
and as last resort i even try to tick "NAND erase all" but i just got the same result as above either with China and HK with PIT, with singular or full installation...
i've been working on this phone for several days and now kinda got confused.
1. i dunno how to disable this FRP (my phone no longer able to boot, so the developer option is out of question) is it possible with odin?
2. or is it because E: failed to mount? but i even try Nand erase all yet still no result.
3. or wrong firmware? i tried it all China and HK with PIT & re-partition, still no result.
4. is there a way to wipe everything and erase this FRP thingi ? ( i have tried to wipe all from recovery too) :crying:
Dear fellows kindly help my problem here.
days ago due to "intune" app by microsoft office 365, my j530y need to unroot, and somehow the intune app reads my stock rom as custom rom.
so i download and flash this "SM-J530Y - J530YDXU3BRH6 XID" from Ymobile site.
everything working just fine (in my opinion), until i tried to flash twrp and try to root. NOTHING WORKED, i tried several twrp tar and cf autoroot also fail.
the notifications are :
1. "Only official released binaries are allowed to be flashed(RECOVERY)"
ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 22 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Code:
Click to expand...
Click to collapse
2. i tried to downgrade to marshmllow/nougat and this error appear: "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2"
3. last resource was just trying to flash custom rom (breeze+) which packed in zip file. the problem is when i want to flash it in the stock recovery, the process failure "can't mount /sdcard"
so please guys help me, i already browse several threads and days for downgrading this, but nothing cant pass this error message "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2
please help,
im not a rich guy, but i will share a bit of my money to anybody give me the proper solution
Thank you in advance:crying:
hacker812c said:
[RMM] RMM State Fix Oreo 8.1 OEM Unlock Fix Dez 2018
This for users with RMM State or OEM Unlock Fix
And for users install custom ROM after Oreo 8.xx
[IMPORTANT]
With this tutorial you can reactivate de OEM unlock Option
TO install twrp or Downgrade to 7.0 nougat
Or install Custom ROM Oreo
[FILES]
#Samsung drivers
#Latest Stock firmware 8.x from Sammobile
#Odin any release after 3.x
#Miracle box 2.85
[NOTE:]
Back up your IMPORTANT files in your phone.
[STEPS]
1. install samsung drivers
2. Disable antivirus and Charge your Battery J7
3. Extract miracle all zip files
4. Run miracle box loader (run as admin)
5. Set your time to 2 years past.
6. Then close miracle box.
7. Open miracle box loader again (you will see miracle box is working now)
8. Connect the phone.
(Always check the phone. if there something pops up, tick "always allow" then "allow") i start Miracle Box_Cracked 2.58 and select Try to 3 options
9. Click "Connect" button on the top left side on miracle box
10. Click "Samsung tab" on the miracle box
11. Click Scan on the top right corner
12. Set the mode selection into : Download then hit "Go" button you will notice that your phone is on download mode and its blank. Just let it be on that state its on the process right now.
13. Click on "Reset Reactivation/EE Locks
14. Hit " Start button" and now its on the process.
15. Reboot the phone in download just hold synchronously press vol - , home button , and power then wait until you get again in the selection and then select "Continue". As you can see there's no more RMM State: prenormal in info. It means you're almost there..
16. Flash Stock 8.1 via Odin.
17. Enter in Stock Recovery and Factory Reset
18. Install TWRP and install Custom ROM
[CHECK ON STOCK]
After reboot Oreo
Steps on Check REMOVING RMM
Setup your phone
You're done.. Check Dev Options and you see "OEM Toggle".
[NOTICE]
After flash Fix is normal
You will see error on the miracle.
That's okay you're almost there to get rid of it.
[LINKS]
Miracle Box:
https://www.techeligible.com/2018/04/03/download-miracle-2-58-with-loader/
https://drive.google.com/file/d/1n_UGxEEmvJFGym0li05GH5tw087_7GjW/view
Hacker812c
The secret of my success is Jesus
Dedicated To Sabrina Mello (2015)
Click to expand...
Click to collapse
Hi all,
My J530Y oem unlock didnt show, rmm state prenormal, cant do anything to root or do more than stock users do basically.
ive been aimlessly crying for help and waiting if there's any update..ive been searching for this answer from July 2018.
So here's why i can work it out:
1. i read this thread just today, and realized there's some miracle called miracle box
2. i used miracle box to "RESURFACE" the OEM Unlock toggle in developer mode (3 times i fail, realized i have to use the newest stock rom of 8.1, indonesian region you can find it here) using odin until i make the oem unlock re-appear (this stock firmware is just temporary so at the end i replaced it with custom rom Breeze+)
3. im using twrp from here, countless time failure until i realized i should really read the guide to flash the twrp in odin, notice no7 that you have to untick auto reboot. read through and it should work!
4. last problem in twrp was it cant mount data partition, the solution is here, notice the faq part
5. so TWRP done, the next thing i do was installing these files in TWRP from OTG >RMM State Lock fix, and no-verity-opt-encrypt-6.0.zip
6. Last, im installing Breeze+ Also in TWRP and still using OTG. (i prefer using this because its prerooted with magisk, which is nice because i need the Intune Hider4magisk so i still can work freely with rooted device
7. I never "REBOOT SYSYEM" from step 4 to 6, since i tried and just realized need to install the custom rom at no6.
Might this help for my fellow J530Y users whose had the same problem as me.
Thank you all.
em. said:
Dear fellows kindly help my problem here.
days ago due to "intune" app by microsoft office 365, my j530y need to unroot, and somehow the intune app reads my stock rom as custom rom.
so i download and flash this "SM-J530Y - J530YDXU3BRH6 XID" from Ymobile site.
everything working just fine (in my opinion), until i tried to flash twrp and try to root. NOTHING WORKED, i tried several twrp tar and cf autoroot also fail.
the notifications are :
1. "Only official released binaries are allowed to be flashed(RECOVERY)"
2. i tried to downgrade to marshmllow/nougat and this error appear: "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2"
3. last resource was just trying to flash custom rom (breeze+) which packed in zip file. the problem is when i want to flash it in the stock recovery, the process failure "can't mount /sdcard"
so please guys help me, i already browse several threads and days for downgrading this, but nothing cant pass this error message "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2
please help,
im not a rich guy, but i will share a bit of my money to anybody give me the proper solution
Thank you in advance:crying:
Click to expand...
Click to collapse
You have to wait for a week to flash twrp. Its a part of the Oreo update that the bootloader remains locked for 7 days
garylawwd said:
You have to wait for a week to flash twrp. Its a part of the Oreo update that the bootloader remains locked for 7 days
Click to expand...
Click to collapse
hi,
i kept my phone awake for 3 weeks and no UEM unlock on devlpr option, do u know why ?
i keep searching for some threads that actually got the uem unlock option in just one week, but not mine.
help.......
Same problem here on G570M.
Does anybody know if Oreo bootloader lock with olders Security patch can be bypassed changing date and making manual updates? I'm stucked right here.
em. said:
Dear fellows kindly help my problem here.
days ago due to "intune" app by microsoft office 365, my j530y need to unroot, and somehow the intune app reads my stock rom as custom rom.
so i download and flash this "SM-J530Y - J530YDXU3BRH6 XID" from Ymobile site.
everything working just fine (in my opinion), until i tried to flash twrp and try to root. NOTHING WORKED, i tried several twrp tar and cf autoroot also fail.
the notifications are :
1. "Only official released binaries are allowed to be flashed(RECOVERY)"
2. i tried to downgrade to marshmllow/nougat and this error appear: "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2"
3. last resource was just trying to flash custom rom (breeze+) which packed in zip file. the problem is when i want to flash it in the stock recovery, the process failure "can't mount /sdcard"
so please guys help me, i already browse several threads and days for downgrading this, but nothing cant pass this error message "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2
please help,
im not a rich guy, but i will share a bit of my money to anybody give me the proper solution
Thank you in advance:crying:
Click to expand...
Click to collapse
same problem on SM-J530G
renguer0 said:
Same problem here on G570M.
Does anybody know if Oreo bootloader lock with olders Security patch can be bypassed changing date and making manual updates? I'm stucked right here.
Click to expand...
Click to collapse
WandresJersey said:
same problem on SM-J530G
Click to expand...
Click to collapse
Have you guys had any solution to this?
em. said:
Have you guys had any solution to this?
Click to expand...
Click to collapse
Just seven days waiting. There is a patch when unlocking bootloader that able to unlock without this trouble.
em. said:
Dear fellows kindly help my problem here.
days ago due to "intune" app by microsoft office 365, my j530y need to unroot, and somehow the intune app reads my stock rom as custom rom.
so i download and flash this "SM-J530Y - J530YDXU3BRH6 XID" from Ymobile site.
everything working just fine (in my opinion), until i tried to flash twrp and try to root. NOTHING WORKED, i tried several twrp tar and cf autoroot also fail.
the notifications are :
1. "Only official released binaries are allowed to be flashed(RECOVERY)"
2. i tried to downgrade to marshmllow/nougat and this error appear: "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2"
3. last resource was just trying to flash custom rom (breeze+) which packed in zip file. the problem is when i want to flash it in the stock recovery, the process failure "can't mount /sdcard"
so please guys help me, i already browse several threads and days for downgrading this, but nothing cant pass this error message "SW REV. CHECK FAIL (BOOTLOADER) DEVICE:3 BINARY:2
please help,
im not a rich guy, but i will share a bit of my money to anybody give me the proper solution
Thank you in advance:crying:
Hi all,
My J530Y oem unlock didnt show
Thank you all.
Click to expand...
Click to collapse
Thank for reply
If twrp correctly installed and internal memory not encrypt is possible flash any rom
Two problems
1 sd encrypt
2 OEM unlock and RMM state
I searching solution for You
Hacker friend
---------- Post added at 10:33 AM ---------- Previous post was at 10:22 AM ----------
renguer0 said:
Just seven days waiting. There is a patch when unlocking bootloader that able to unlock without this trouble.
Click to expand...
Click to collapse
So i will not go back to official rom
Samsung stupid software
Hacker
hacker812c said:
Thank for reply
If twrp correctly installed and internal memory not encrypt is possible flash any rom
Two problems
1 sd encrypt
2 OEM unlock and RMM state
I searching solution for You
Hacker friend
---------- Post added at 10:33 AM ---------- Previous post was at 10:22 AM ----------
So i will not go back to official rom
Samsung stupid software
Hacker
Click to expand...
Click to collapse
See last post mine on TWRP thread. I've posted a solution to this.
If you have your phone briked you can upload stock rom from odin. Take care about the version, you can't downgrade.
renguer0 said:
See last post mine on TWRP thread. I've posted a solution to this.
If you have your phone briked you can upload stock rom from odin. Take care about the version, you can't downgrade.
Click to expand...
Click to collapse
Very important this information
Thank You
Report below => text form post @Renquer0 (thanks)
About TWRP => Error on twrp installing any zip rom, magisk or kernel
When ENCRYPTION message is showed when booting DON'T CLICK IN RESET.
You need to enable data partition (guide quoted) and then install Magisk,
RMM State Bypass and no-verity-opt-encrypt-6.0 files in that order.
This is the entire quoted post:
renguer0 said:
For everyone that can't mount or format data (this f**k up the entire rooting process) you can follow this:
sharneil said:
While formatting device using TWRP re., device failed and showed me something like "unable to mount /data or system"
This happens because your recovery is unable to read internal storage. You need to do some small steps.
Steps
1) Reboot into TWRP recovery
2) go to " Wipe "
3) then " Advanced Wipe "
4) Choose " data " and tap on " Repair or Change File System "
5) Then tap " Change File System "
You will see text as ext4 infront of ' file system '
6) Change it to "EXT2" by tapping and swiping.
7) Once its done, change it to "EXT4" again.
(if some detail doesn't match after step 5, don't worry... Change file system path to something else then and to default again.)
DONE !
Then go back and try formatting ( or any other work ). It should succeed.
This method worked for me where I was using Redmi Note 4 with custom(Lineage) os and TWRP 3.2.3.0
If this doesn't work, then try once again or I will suggest you to install TWRP recovery again.
Thank you.
Click to expand...
Click to collapse
Maybe the OP can add it to the first post. This allowed to me to install TWRP and Magisk in my J5 Prime.
When ENCRYPTION message is showed when booting DON'T CLICK IN RESET. You need to enable data partition (guide quoted) and then install Magisk, RMM State Bypass and no-verity-opt-encrypt-6.0 files in that order.
Click to expand...
Click to collapse
Hope it helps. In my case I couldn't format data partition in TWRP until I changed filesystem to EXT2 and EXT4.
Hi, i have a Samsung S10 plus 128gb that was interupted when it was going to get new image and twrp. Belive i was doing it wrong order :S
Now i cant get out off download mode.
Get this error message:
ODIN MODE (AVB Fail)
recovery: Error validating footer. (0)
recovery: Error verifiying vbmeta image: invalid vbmeta header (6)
CUSTOM RECOVERY
VBMETA G975FXXU4BTA8, 28787933R
Is there any way to solve this? Would be happy if there is...
robibo said:
Hi, i have a Samsung S10 plus 128gb that was interupted when it was going to get new image and twrp. Belive i was doing it wrong order :S
Now i cant get out off download mode.
Get this error message:
ODIN MODE (AVB Fail)
recovery: Error validating footer. (0)
recovery: Error verifiying vbmeta image: invalid vbmeta header (6)
CUSTOM RECOVERY
VBMETA G975FXXU4BTA8, 28787933R
Is there any way to solve this? Would be happy if there is...
Click to expand...
Click to collapse
Probably you'll need to flash stock rom via Odin.
Or via Smart Switch.
And this is a wrong forum for S10 plus.
w41ru5 said:
Probably you'll need to flash stock rom via Odin.
Or via Smart Switch.
And this is a wrong forum for S10 plus.
Click to expand...
Click to collapse
Thanks for answering, i will try this later today and get back. I saw that i put it in wrong section will try to remove it.
Is there any other way then Odin for flashing Rom? I have tried and get error.
Im using Samfirm to download the Rom and Odin for flashing. I have used Odin without problems before but now its not working :S
Im stuck at the moment someone with some suggestions?
Solved
robibo said:
Solved
Click to expand...
Click to collapse
How?
Midyr said:
How?
Click to expand...
Click to collapse
Sorry for the late answer, i used odinr downloading the stock firmwire into the phone but i used samfirm instead to download newest version and when i setup the odin i did almost as when i root it but didnt uncheck the reboot function i let it be checked and the phone downloaded the stock firmwire and started to work as it should.
Whats up with your phone? Where does it stuck?
robibo said:
Sorry for the late answer, i used odinr downloading the stock firmwire into the phone but i used samfirm instead to download newest version and when i setup the odin i did almost as when i root it but didnt uncheck the reboot function i let it be checked and the phone downloaded the stock firmwire and started to work as it should.
Whats up with your phone? Where does it stuck?
Click to expand...
Click to collapse
hey, got stuck at the same downloadmode boot screen (from normaly booting after installing twrp via Odin) but with this at the end: G975FXXU4CTC9 29996307R.
the rest is exactly the same. bevor i had the Problem that twrp coundt write System. flashed stock Samsung and now i cant Flash a working twrp. tried official&custom twrp. Nothing seems to work. Need help.