Note - this is for the SM-G930A AKA AT&T model only. Unrooting and flashing firmware works the same way for other carriers, but with different files.
Hi everyone, I just thought I should share how I went about unrooting my S7. I initially rooted it while it was running Nougat already, and I liked the extra customization options. However, I found after several months of using it that the only real feature that I personally liked about having a rooted S7 was the ability to "try" paid apps for free using Lucky Patcher.
The downside of rooting, for me anyway, was severely slow laggy touch inputs and general phone performance. Sometimes - especially after a reboot - I experienced slightly better performance, but overall it just got too annoying. The app that gave me the most trouble was Google Maps. That's why I decided to cut my losses and unroot; I'd figured out which apps I actually wanted to buy since I'd already used them for a while (I will miss free in-app purchases though ).
So after some Googling and reading up, I decided to try for myself. I was already running baseband version G930AUCU4BQA4 before I rooted, so I thought maybe I could just flash stock Nougat and be done. However, all the guides I read say to flash a stock firmware, so that's what I did to be safe.
So first I downloaded the stock firmware for my phone from a website called rootmygalaxy, on the Download Stock ROM For AT&T Galaxy S7/S7 Edge (SM-G930A/SM-G935A) page (being a new user sucks).
After that, I used the stock, unpatched version of Odin v3.12.3, (from Odin's website) to flash the stock firmware onto my phone. It should be noted that the steps you take to flash a firmware to download mode should be 1. Open Odin, 2. Put phone in download mode, 3. plug the phone in. I had some failures in Odin because I was doing that wrong. Steps one and two are probably interchangeable, but just make sure plugging in the phone is the last thing you do. Also, make sure you have ticked USB Debugging and OEM Unlock under developer options before you do any flashing.
Once that was complete, I rebooted my phone and set up Android 6.0.1 on the phone. After a full 24 hours, I still couldn't get any OTA updates, so I decided to manually flash Nougat because it is so much better than Marshmallow.
This guide on the website droidviews called Install Android 7.0 Nougat on AT&T Galaxy S7/ S7 Edge (SM-G930A/ G935A) was very helpful.
Take note of the fact that the guide references baseband versions by the last 4 characters, i.e. G930AUCU4BQA4 becomes just BQA4. I checked my baseband version, which ended in APJ4. According to that guide, all I had to do was flash APK1 and then I'd be set to update to Nougat, so that's exactly what I did.
After again flashing via the 4-file method with Odin, I set up the phone again so I was back at the home screen. I downloaded both the APK1 and the .zip file containing Nougat while my phone was charging (from 90%, my phone was at ~50% by the time I had Nougat up and running), and I placed the .zip Nougat update onto an SD card that I usually keep in the phone. Once APK1 was set up, I put the SD card back in, rebooted into Recovery Mode, and waited until the manual screen came up. Then I simply chose update from SD card, chose the .zip file I'd placed in there, and waited. After a while, I was greeted by a new setup screen. I set up Nougat and now it's running just fine.
The only issue I'm seeing is that I'm still not getting any OTA updates. I hope that doesn't continue, but if it does I can just update via .zip or something.
Thanks for reading!
where did you get the nougat.zip?
Related
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?
Hi all,
A couple quick questions here. I've done some reading up, but most of the information is more in depth than I need at the moment so I'm looking for some quick answers.
My SO has a Verizon S5, that has a locked bootloader, is not rooted, and is still on 5.0.
She swapped carriers a while back, so is no longer on the Verizon network. The IMEI is clean, and her Verizon account is fully paid, and everything on the phone works fine, aside from it being stuck on 5.0.
It will not update via the automated system, because I assume it's trying to reach out to straight talk for the update and gets a response that it's on the newest version.
I downloaded the Verizon OTA update file (approximately 1 gb) for 6.0.1. It's named update.zip to allow for automated updating.
Here are my questions:
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
Thank you very much for your assistance!
Hi bladebarrier, I actually just did the same thing a few weeks ago with a used S5 from Verizon going to Straight Talk.
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
I'm unsure if that would work, someone else may be able to answer as to that method, however I used the Odin tool v3.11.1, downloaded the PD1 image from here. There are some good video tutorials on YouTube and on writeups on this forum as well regarding how to flash the Marshmallow update using Odin.
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
No downsides that I've noticed and seems to have slightly better battery life.
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
You do not need root to flash it if using the Odin tool.
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
Yes, but it's always a good idea to make a backup of everything.
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
The only thing that the locked boot loader affects for now is the ability to flash custom ROMs. I was able to downgrade to 5.0 Lollipop which you can still root, even after upgrading, however I decided to just go back to Marshmallow and wait for an exploit to be found, if one ever is.
jesimpki89 said:
Hi bladebarrier, I actually just did the same thing a few weeks ago with a used S5 from Verizon going to Straight Talk.
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
I'm unsure if that would work, someone else may be able to answer as to that method, however I used the Odin tool v3.11.1, downloaded the PD1 image from here. There are some good video tutorials on YouTube and on writeups on this forum as well regarding how to flash the Marshmallow update using Odin.
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
No downsides that I've noticed and seems to have slightly better battery life.
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
You do not need root to flash it if using the Odin tool.
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
Yes, but it's always a good idea to make a backup of everything.
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
The only thing that the locked boot loader affects for now is the ability to flash custom ROMs. I was able to downgrade to 5.0 Lollipop which you can still root, even after upgrading, however I decided to just go back to Marshmallow and wait for an exploit to be found, if one ever is.
Click to expand...
Click to collapse
Thank you very much for your thorough response. It sounds like it will be a nice smooth flash, and I will use the full Odin version instead of the OTA file, to ensure it goes through comfortably.
Odin looked like it wanted to wipe the apps, so I ended up using the stock recovery/installer that's built in, and placing the OTA update file on the external SD card.
That worked like a charm. It took a bit, as expected, but all of the apps and info were ok after.
The only thing I can't sort out is why I can't find an option for the "Themes" setting in touch wiz. Any suggestions? I realize I could have her go to a third party launcher, like nova, but I have all of the theme options on my note 3, that's ported to MM note 5, and the theme option is still right there in the settings list, per normal. Maybe I'm just not seeing it, but I couldn't find an option on her S5 during 5.0, or now on 6.0.1. Is that something they never updated for the older phones?
Thinking I'll post the TLDR up top:
What ROM should I use for the most basic (no extra "features") for my phone? Perhaps I'm too soon for such a version? I have the Exynos S8+.
So ~4 years ago I decided to move to Windows Phone (xperia 1020 -> Lumia 950XL). I'm not a big Facebook guy, so my phone is mainly for notes, texts and calling. I have however become a "fan" of Microsoft products, and I managed to change everything from "Samsung all the way up your ass" to "Microsoft when you desire it" on my S8+, including remapping the bixby button to Cortana. I have turned of all permissions possible for all Samsung apps I could, the only reason I want to root/change ROM is because I hate the "always active, **** up your battery and start all apps lockscreen home button".
I don't want any fancy stuff, I just want a clean android version for my Phone, with the option to disable the Home button on lock screen... And perhaps a point in the right direction for how to root/ROM my phone correctly. I believe it's 7 years since I've looked into rooting, hell, might even use the wrong terms here... That's what not looking into tech like I did 7 years ago does to a man
Edit: My 950XL basically went to hell, so I had to more or less impulse-purchase my S8+, without looking into what I really bought.
I've had this Samsung phone for maybe a month and a half. So please take this with a grain a salt. Information that was scattered around and I had to go searching for when I bought this phone. Here is my brain dump...
There isn't an AOSP or Vanilla Android ROM, they're all touchwiz based. Most of the ROMs give you an option during installation of certain apps you can remove. I dabbed around making a very clean and minimal ROM, but turns out if you remove too much the setup wizard falls apart and the phone basically freezes before even selecting your language. So I resorted to installing someone elses ROM and after setting it up, using ROM toolkit to remove random system apps and hoping it doesn't crash after a reboot. haha
This is my first Samsung phone (exynos S8) so getting around to using ODIN and the different files you need to flash was a headache. The general rules to follow are.
1. Enable Developer Options and turn on OEM Unlock. Then never again change that option. If you are not running 100% stock the bootloader will prevent the phone from turning on correctly and kick you into Download mode basically forcing you to flash a stock ROM. So once you turn on OEM Unlock, just leave it turned on. I was messing around in Dev Options and without knowing turned it off. Next time I restarted my phone I was forced to flash stock rom again. Custom ROMS tend to remove that option entirely so someone doesn't mistakenly turn it OFF.
2. KNOX is Samsungs security in stock ROMs. The moment any kind of custom recovery or anything is installed. KNOX will be tripped and stop the phone from completing boot up. It'll basically tell you that theres something that wasn't signed by Samsung and to reset the phone. An endless cycle unless you, 1. Install a Custom ROM or 2. Flash a stock ROM to undo whatever you did.
3. Keep your firmware (modem bootloader etc) as recommended by the ROM Dev. AQF7 is the last known stable and developed for firmware.
Right now there a new update AQG5 that has an updated Bootloader that will softbrick your phone. People have tried installing the entire Stock ROM and ran into issues. It worked for some, but avoid it for now. If you do find the need to play with it. For the time being flashing just the modem (CP file) and keeping or using the previous AQF7 Bootloader (BL file) should keep your phone usable.
4. The S8 and S8+ are very much identical except the obvious size difference. Cross Development allows Devs to create a single ROM for both devices. With only the Kernel being the difference. Which is some cases both are in the ROM zip and automatically selected for you. So if they state its compatible with both. If not just focus on S8+ only ROMS.
5. ODIN is a program that's used to flash files. Either to flash custom recovery or stock files. Samsungs SmartSwitch program is like Windows Phone Recovery Tool. It'll detect the phone you have connected and download the latest stock ROM it can find and flash it. ODIN is a stripped down program that we use to flash individual files. Its only really used to either flash a stock ROM or custom recovery. In some cases bootloaders and modem updates, but id avoid those for now.
6. ROM/Firmware structure. Samsung stock ROMs and Firmware zips are available all over the place. Basically its a .zip file with more tar files in it.
Lets say you download a stock ROM.
The name is normally Model|Region|Version.zip so for me I have G950FXXU1AQF7 that tells you. G950F is the Euro S8 Exynos, XXU1 is basically just New Zealand and some carrier, AQF7 is the firmware version. The file name might have multiple regions. Theres more into what means what. I personally just focus on the Model and the Firmware. I can delete carrier apps or flash my carriers CSC later on. From what I've seen version numbers increase with the next letter in the alphabet and a number. So obviously an update with AQF7 is newer then one named AQD6 etc.
If you where to extract a stock firmware/ROM zip to use in ODIN etc. It normally gets broken down to these tar files. If stock files are renamed ODIN will not accept them. It happen to me
BL** - Contains the Bootloader, partition layout etc.
AP** - Actual ROM. Kernel, System, cache, userdata (for some), recovery
CP** - Modem files.
CSC** - Preloaded carrier apps, settings. This comes in two files. If you flash HOME_CSC your data is kept if you decide to do an update. CSC file without HOME will format the data partition.
These files are flashed in their prepacked files. You wont flash individual system, kernel files etc with odin.
7. TWRP the go to recovery for Android. You'll use ODIN to flash it. On twrps website just find the S8+ (dream2lte) and download the .tar file. Using ODIN it will be flashed as an AP file.
8. Once you have TWRP installed it will trip KNOX if using a stock ROM. The button combination to get you into recovery from a fully turned off phone is,
PWR + Vol Up + Bixby
Vol Down is Download Mode, also used as the button combo to force the phone to restart. If you restart it this way, quickly move your finger and hit Vol Up and if done right will go into recovery.
9. CSC is carrier bloatware, but in the forums its what gives you VoLTE & WifiCalling. As long as your carrier supports it and in an area/wifi network that will allow it. Some ROMs have it included, if not you can find a forum thread which offers a flashable zip that will give you all the carriers around the globe. If selected correctly should give you those features for your carrier on your phone.
___________
The jist of all that is. Enable OEM unlock > use ODIN to flash TWRP > Boot into TWRP and flash a custom ROM. You'll use TWRP to flash ROMS, Mods, Custom Kernels. ODIN/SmartSwitch would be used to revert to 100% stock. If you ever some how turn off OEM unlock while using a custom ROM. FAP will be turned on and block you from using your phone until you flash a stock ROM and turn on OEM unlock again.
I'm personally using Renovate ICE on my S8 and have removed ALOT of system apps. Windows Phone has a special place in my heart, but Microsoft is just terrible about it now. I had a 950XL for a bit, but always had HTC phones when it came to Android. For me HTC was so much easier to work with when it came to ROMs. Now I'm rocking an S8 so had to learn fast.
Always do your research before flashing anything. Make sure multiple sources say the same thing or risk flashing something that might break your phone. If any other user finds something I mention to be wrong, PLEASE correct me. I will learn and so will others.
What I missed from HTC forums was the sticky threads. The go to threads that broken everything down and explained it. All the HTC phones I had while using XDA had these sticky threads in each devices forums. I was and still am reading threads from other Galaxy phones just to get a better understanding of how it all works since they aren't in this devices forum.
Not to talk bad about long time Samsung users, but yall need to get organized haha. Once I'm confident with Samsungs inner programming workings I'll try to make an actual knowledge thread with links and where credit is do. But dam it's like sink or swim around some galaxy phones.
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
bkenobi69 said:
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Try to dial *#0808# in the stock phone application.
You should see a menu with several options.
Select "MTP+ADB" under USB settings and press "OK".
Then you'll be able to connect your phone via MTP or ADB to your PC.
If there's no menu, then (assuming you're rooted) open a good file browser (ES, Root Explorer or something) and open the file /efs/carrier/HiddenMenu (it's a simple text file) and replace OFF with ON there.
Save the changes and reboot the phone.
Now the menu should be operational.
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
bkenobi69 said:
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
Click to expand...
Click to collapse
Currently root is impossible for MM on G900V CID11.
Impossible means you cannot gain it now, most likely it's forever.
There's no internet site which can help.
You must choose: root on LP or unrooted MM.
You must decide if you want a stock ROM or something (TW-based) else too.
It's a good idea to flash and use a stock firmware for the time while you're thinking.
Interesting... I guess I must have been reading things wrong because I thought I could go to MM with root. I'll try going to Lollipop then but first I'm going to just flash back to JB 4.4.4.
I downloaded 4.4.4 from Samsung and was going to write it with Odin, but it says FAIL when I try to flash. I suspect I just tripped Knox...
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I'll look around to find a guide, but if you have a suggestion, I'd certainly listen!
bkenobi69 said:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means that you've upgraded your phone's firmware while experimenting.
Now you cannot directly flash 4.4.4 with Odin, you're limited to 5.0 (BOK3) and above.
Ok. I'll read the guides on the head of this list and see if I can find the right information.
FWIW, I was following the same how-to that most of the stickies point to and say is safe. I wonder how I got to a position that I'm in now when I did the same as recommended. Painiac's thread points to the same thing I did:
https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I think I may have tried to flash a MM stock rom though when it got into a boot loop. I suspect that would be the issue.
Bootloop is not a problem in this case.
Just reboot to the recovery and perform a factory reset from there.
The phone will boot but the first boot will take 10-15 min.
bkenobi69 said:
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Marshmallow can not be rooted on CID 11 devices. The Samsung drivers are found here: https://www.samsung.com/us/support/owners/product/galaxy-s5-verizon You can follow the 5.0 root guide here: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529 to downgrade to 5.0. If you want to downgrade past that to a version lower than 5.0, you will still have to follow that guide then follow the instructions here (I recommend you to follow the root guide for 5.0 above then skip steps 1 and 2 on this page): https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858 . You can find stock firmwares here: https://forum.xda-developers.com/showthread.php?t=2784880 (stock firmware, kernel, and modem files) and if you get bootlooped or bricked, just reflash the combination file from the root guide. If you want to root 4.4.4, follow the downgrade method using all of the NK2 files but the flash the NGC kernel, run through the setup, then use towelroot and flash the NK2 kernel after that. If you ever get stuck on the red Verizon screen, just pop the battery out and reboot.
That's about all anyone can do and a run down of everything.
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
bkenobi69 said:
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
Click to expand...
Click to collapse
Understandable, I can't believe it is 2018 and we still haven't invented a way to compress 1.7GB into 1.7MB archives to make life easy on low connections. How is battery life on 4.4.4 and which update of 4.4.4 are you on? I've been having an issue with my phone dropping a percent every 2 minutes on 5.0/6.0. It would be nice find a version to root along with excellent battery life.
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Ok, I tethered to my wife's phone and am burning her data (shhhh, don't tell her).
I grabbed all of the OC4 files, the PB1 rom, and lolliroot. I think I have everything I need so long as OC4 is a good place to end up.
bkenobi69 said:
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Click to expand...
Click to collapse
Here are some files (that I been hunting for about an hour for). Just gonna reference this for future use and anyone who comes across this thread. http://rootjunkysdl.com/files/?dir=Galaxy S5
Nice find!
I have the phone up and running on stock PB1 currently. I'm going to let it sit to see what the battery is like prior to rooting. While I haven't gotten it hooked back up to my account yet nor do I have it rooted, I feel pretty confident now that I'm on the right track. Thanks!
Just to finish out this topic, I have not successfully completed attaining root on 5.0. I flashed PB1 to the phone and then followed this guide for installing KingRoot:
https://androidforums.com/threads/root-question.1120150/
I got the lolliroot files from here:
https://www.androidfilehost.com/?fid=312968873555011514
Thanks to all who offered help!
Qyuck question... I've got my phone working well bow, but there's one issue with apps I'm not sure how to address. I want to use Verizon Visual Voicemail but I can't find it on the Play store. I disabled updates so I wouldn't get the marshmallow update and break root. but, with updates turned off, VVM won't get pushed. Any suggestions?
Hi all,
Was recently in the 'States and broke my S8 - it's now the third mobile screen I've busted since Samsung brought in curved edges, never had any issues with the S2 or S5 - who ever thought tempering glass and curving it would be a good idea??
Anyway I had the opportunity to pickup a brand new Samsung Galaxy S8 Active and did a quick bit of research. I found the most compatible version with my carriers back home in AUS was the SM-G892A from AT&T. Picked up a brand new unlocked model, stupid me didn't connect it up to AT&T while I was there. I turned it on and played around with it on Wifi for the last few days of our trip and returned home to Melbourne.
Basically I now understand AT&T are a bunch of ***** and do not allow updates to be pushed even for unlocked devices overseas. Considering a lot of the updates are for security I'm very surprised by this.
Anyway so I've notcied a few tiny bugs here and there with apps/OS and figured updating my device/OS is the way to go and might resolve the issues. I guess the easiest way to get the info I need is to put the questions I have individually, as my mind tends to jump all over the place when I'm working a problem:
1. Is there any way to get my phone updated without rooting/flashing the phone?
2. If not, what is the best option for a S8 Active? Are there any firmware versions that will enable OTA updates so I don't need to keep flashing everytime new firmware is released? I have seen some posts about T-Mobile being able to be flashed over an AT&T model or even the G892U or maybe a custom firmware that allows this?
3. Will rooting/flashing interfere with any of the carrier settings etc? Don't want to upgrade it only to find it disables an LTE band or something?
4. I am an absolute noob at flashing, have never done it but am pretty tech savvy so if there is a step-by-step procedure I wil have no dramas following it. Saying that, I would rather not make the device worse than it is so I only want to follow tried & tested procedures if that makes sense, I don't want my device to be a lab-rat.
5. If there is no way to enable OTA internationally as per Question #2 when new firmware updates become available on XDA will flashing a new update delete personalisation/settings/files etc? Or will it retain them and update like a stock model performing a firmware upgrade would? If not, that would be a pain in the ass and time consuming to have to re-apply settings and reinstall apps every time and almost makes the idea of flashing unattractive.
6. I have baseband G892AUCU1AQG4 - taking into account Question #2 what is the best way to move forward? Considering Android 8.0 is available for the S8 Active and has been available for my model from AT&T since March 1st, 2018 apparently I'm hoping there might be some way to move towards that.
Hope someone might be able to help,
Thanks in advance
UPDATE 05/05/2019
Got some answers to my original questions...
1. Rooting/Flashing are different things - rooting allows custom firmware, flashing is the procedure to install custom or OEM firmware onto the device.
2. The best option for me I think is to just update to newer AT&T firmware so I get the updates and new software features as I'm not interested in custom firmware. I still do not know if it is possible to get OTA updates for this device directly from Samsung/Google.
3. As long as you are flashing from the same model firmware as in SM-G892A to SM-G892A should be no issues, however using SM-G892U might cause issues.
4. Once I wrapped my head around how baseband versions of firmware work and what is needed to get between bootloader versions flashing from SD Card or Odin (as I suspected) was very straightforward thanks to some of the guides out there. To make this easier for anyone facing the same issue I have written how I did this below.
5. Yes, flashing for AT&T will delete everything, it's an absolute PIA and that's why I will keep searching for a way to get OTA updates enabled if at all possible. However I believe Samsung SmartSwitch is pretty good for backing up and restoring so that might be a simple way forward.
6. See my latest post, I was 12 updates behind but able to skip 7 of them using my method.
I'm considering importing an S8 Active AT&T and have the same questions. How did you go?
secateurs said:
I'm considering importing an S8 Active AT&T and have the same questions. How did you go?
Click to expand...
Click to collapse
Sorry for the slow reply I've only just had the time to dive into this. Yes I have figured it out.
There are two ways, incrementally update by applying OTA updates via the SD card. However trying to find all of these can be a pain.
The other way you may have read about is to use Samsung's own 'Odin' flashing software.
Because I had the very first baseband version G892AUCU1AQG4 I was way behind. The fifth-last digit designates the bootloader version, you cannot jump from v1 to v3 for example. So what you can do is use a few OTA updates to jump you from v1 to the first v2, you can then use Odin to jump you all the way up and use another OTA to get you to the next bootloader version. Hope that makes sense?
So I was able to use x2 OTA updates to get from 1AQG4 to 1AQJ2, then I was able to do one more OTA to get from 1AQJ2-to-2AQK3. Now if I was to continue using the OTA method with the SD card, I would need to run the process x8 times. This presents 3 issues:
1. Time consuming, trying to find all the correct OTA updates.
2. Even when you do get all the correct OTA updates you then have to copy each on to the SD card waiting for the phone to update and then repeat the process.
3. Even if you can find a link for a required OTA update a lot of the links are dead.
However using Odin and the flash files I was able to skip these and go directly from 2AQK3 to 2BRF2, use one OTA update and then I was onto Bootloader v3 (which is the latest version). Here is how I compressed 12 updates do into 5, good luck..
1. 1AQG4-to-1AQJ2 OTA (SD CARD): dropbox.com/s/ikor71zt1ec0nyn/SS-G892AUCU1AQG4-to-S1AQJ2.zip?dl=0
2. 1AQJ2-to-2AQK3 OTA (SD CARD): dropbox.com/s/ott9fs9qunkvf9x/SS-G892AUCS1AQJ2-to-U2AQK3.zip?dl=0
3. 2AQK3-to-2BRF2 Odin Flash : androidfilehost.com/?fid=1322778262904016415
4. 2BRF2-to-3BRG1 OTA (SD CARD): androidfilehost.com/?fid=1322778262904016441
5. 3BRG1-to-3BRL1 Odin Flash: mega.nz/#!7M42VCAJ!-FKnhzwTZG0He1kb9FzHHaPX4Aanlnj4fpn0M61DzR4
Have the s8 active outside of America and desperately want to update it
Hey ,
I'm sorry to bring up this old thread but I didn't really understand the method you used sorry I'm really new to this thing, I have the s8 active Sm-g892A ( the att) model it's on the baseband version G892AUCS2ARB1 . If you could help me out a bit with this I would be really grateful, having Android 7.0 really makes me concerned as I've heard the security patches also won't update.
None2939 said:
Hey ,
I'm sorry to bring up this old thread but I didn't really understand the method you used sorry I'm really new to this thing, I have the s8 active Sm-g892A ( the att) model it's on the baseband version G892AUCS2ARB1 . If you could help me out a bit with this I would be really grateful, having Android 7.0 really makes me concerned as I've heard the security patches also won't update.
Click to expand...
Click to collapse
So you are on Bootloader v2 (5th character from the right). So you can skip straight to Step 3. Be warned all instructions below will result in all data on your device being wiped!
Using Odin to upgrade as directed on Step 3 & 5 or future upgrades (there is now v4 software appearing):
You need to download Odin (you don't need a modified/Comsy version).
You need to enable Developer Options on your Galaxy.
Once you have developer options you need to enable 'USB Debugging'.
You need to shutdown your Galaxy.
Connect your USB cabble to your PC.
Boot into Download mode by using the Power+Bixby+Volume Down combo. OR if that doesn't work Use the Power+Bixby+Volume Up and use the menu to get into Download Mode.
Open Odin on your PC, it should say 'Added' if it detects your Galaxy correctly. If it doesn't you may need to install some USB drivers (you can Google how to do this).
Once it says 'Added' you can add the files from Step 3 and flash but be warned it will wipe everything on your device.
For Step 4 OTA:
Very simply download the ZIP file and place the complete ZIP file on an SD Card (it should not be extracted must be complete ZIP archive). Place the SD Card in the Galaxy, power off and boot into Recovery Mode Power+Bixby+Volume Up. Then simply use the Volume Up/Down and Power keys to navigate through, 'Apply Update from SD Card', find your SD card and the ZIP file and allow the update to run.